D-pad navigation settings - 8525, TyTN, MDA Vario II, JasJam General

All of a sudden my d-pad navigation does not seem to function as I'd seen before -- it was set to move page by page when I'd press right or left, but now seems only to move line by line. In Messaging it would move from account to account if I pressed right or left -- now it just moves up and down the list of messages.
Does anyone know the registry setting that controls this (can't find a control panel/settings for it)? Is there a tweak to set d-pad navigation perhaps?
Thanks!

Related

DPAD Navigation pad auto repeat

All - I'm not sure if my 8125 was like this before but the dpad does not auto repeat. I can't just hold the button down to continuosly move the cursor left. Same thing with the keyboard. Is this normal?
Registry setting not available in the input control panel
It appears that some program had set my registry repeat setting control_panel->kbd to 0. The control panel application "Input" does not have an option for setting this for SIP and my system tab does not have a keyboard application for setting this feature.

Scrolling through Contacts - Inconsistent Feature?

Ok.....here is one for the gurus.
A while ago, by accident, I came across what I suspect is a feature in scrolling through Contacts which I could not replicate for the life of me.
Basically, when opening Contacts using the scroll wheel, I somehow managed to get a large icon appearing on the screen & I could then scroll through the individual letters of the alphabet. When I closed Contacts & re-opened it, I couldn't replicate it.
After playing around with it today, I got a step closer but buggered if I can make this feature stick permanently. May be it requires a registry hack.
To see what I mean:
1) Tap Contacts.
2) Scroll up or down until the text field is cleared.
3) Tap Menu -> Options -> Ok.
4) Now scroll up or down.
5) Goto 2
Another user over at Whirlpool Forums found the following method:
"The closest that I can think of is open contacts list, press and hold the down button on the 4 way direction pad, the large alphabet will show up after a second or two. Not very useful to me though..."
What I would like to see is that feature invoked permanently so that I can access Contacts from the Start menu using the scroll wheel & then being able to scroll through the alphabet.
I stumbled across this in the original ROM (shipped with Australian D810) but am currently using 1.23.707.6.
Ideas anyone?
I was wondering if this was possible as well. I hope there is a way to do this because this seems more useful to me when navigating the phone in portrait mode.
maybe its a bug, it happens when you open the contacts app, set focus on the search area, remove and restore focus on the app and press up or down.
this also works:
open contacts app
tap search area
press windows key twice( open and close start menu )
press down or up
I don't think it's a bug!
The way it works on my device is:
Place the focus anywhere in the Contacts list or Select box
Hold the Down or Up direction keys
After 2 screens of scrolling, the Large Letter scroller starts
Release when you reach the letter you want.
It is not a bug. It works on my Wizard, that if I were to press and hold my d-pad (no, I dont' have a wheel) long enough, the big letters will appear. So, in a scroll wheel case, I think probably you will need to scroll it fast enough/long/consistent enough for it to appear?
Apoc said:
set focus on the search area,
Click to expand...
Click to collapse
Thanks Apoc - I think you're onto something there regarding focus.
NeilM said:
I don't think it's a bug!
The way it works on my device is:
Click to expand...
Click to collapse
Irrespective of how you open Contacts & where the focus is, pressing & holding the up or down key on the direction pad will bring up the alphabet icon after 1 - 2 secs. My aim is to wholly & soley use the scroll wheel to open & search Contacts using the alphabet icon without touching the directional keypad whatsoever - only the scroll wheel.
hanmin said:
It is not a bug. It works on my Wizard, that if I were to press and hold my d-pad (no, I dont' have a wheel)
Click to expand...
Click to collapse
May not be a bug on the Wizard, but potentially is on the Trinity/D810 utilizing the scroll wheel.
Apoc's comment re: focus had me perform some more testing & managed to get a step closer. Depending on how you close Contacts will determine whether you can open Contacts & scroll (using the wheel) through the alphabet successfully.
It seems that Contacts needs to be running in the background as a "running program" & is achieved by closing it using the side "OK" button after having put the focus in the search field using the scroll wheel. Will also work tapping the X to close unless you have configured X to actually close running programs.
To start off:-
1) Press side ok button to open Start menu.
2) Scroll to Contacts & depress.
3) Scroll up to set focus in search field.
4) Press side ok to close Contacts (actually closes as a running program).
5) Press side ok to open Start menu.
6) Scroll to Contacts & depress.
7) Now scroll through alphabet - Woohoo!
8) Scroll back to search field to set focus.
9) Goto 4
As long as Contacts runs in the background as a running program I can replicate this repeatedly, but once its closed fully, it seems that focus is returned to the first entry in Contacts rather than the search field hence preventing me from scrolling the alphabet when re-opening.
So, is this a bug or an inelegantly implemented feature?
[Edit] Perhaps a registry hack could set the focus on the search field rather than the first entry in the list. If that is at all possible & works then it definitely becomes a handy feature.
This is not a bug, its a function of windows mobile. It works the same way that an iPod does.
jlagden said:
This is not a bug, its a function of windows mobile. It works the same way that an iPod does.
Click to expand...
Click to collapse
Do you not mean that it is a WM function that could be improved? The way I see it, depending on the method used to open Contacts depends whether one sees it as a function or not.
Unfortunately I don't have an iPod to compare with.
thunderbird1 said:
Do you not mean that it is a WM function that could be improved? The way I see it, depending on the method used to open Contacts depends whether one sees it as a function or not.
Unfortunately I don't have an iPod to compare with.
Click to expand...
Click to collapse
what more would you want it to do? it saves you time scrolling from a to z.
jlagden said:
what more would you want it to do? it saves you time scrolling from a to z.
Click to expand...
Click to collapse
What saves time? Either I'm missing the point or you have mis-interpreted mine.
you can also use your keyboard and select the arrow up / down key for a few seconds to trigger the alphabet search (big letters).
andason said:
you can also use your keyboard and select the arrow up / down key for a few seconds to trigger the alphabet search (big letters).
Click to expand...
Click to collapse
Cheers for that, but I've already noted that in my earlier posts.
thunderbird1 said:
What saves time? Either I'm missing the point or you have mis-interpreted mine.
Click to expand...
Click to collapse
You are suggesting that it is a function that could be improved, but I don't see what gain you would get. This function is also present in an old WM2003 device that I have, so it clearly isn’t new.
If you want it to initiate instantly when you use the scroll wheel, you are only going to jump to the first contact in each alphabetical section. This is great if you only have one contact per alphabet letter, but if like most people you have multiple contacts in each section you will still have to do an additional scroll to select the contact.
The time saving is due to the jumping quickly to each alphabet section.

Disabling buttons?

I'd like to disable three btutons if possible...
Those two soft keys on the keyboard (for the bottom left bottom right of the screen buttons if you know what i'm refering to; if not.. the one that closes your sms when you accidently hit it!!)
If i could get it app specific thath would be awesome; could disable those for messaging app then disable the center select from the four way directional for the emulator i use;
Problem with the meulator is that button PAUSES the game
Any suggestions? Short of ripping them off? (Totally willing; it's frustrating.)

Dialer optimization - double tap / click to dial and up/down arrows

Guys,
does anybody know if and how can I make my dialer not dial the person when I single tap on the row but only highlight it and then use either the hardware dial button or the big green "talk" button ... or double tapping the highlighted row?
I find it very annoying when I tap an adjacent row by mistake and have to search again. This happens pretty often when I drive and have my HD2 on a stand but it also happens from time to time when hold the phone in one hand I try to select/dial the topmost row in the result list.
The last part brings another question - is there a way to add two arrow buttons at the bottom of the dialer which will go trough up/down through the list? These will be very helpful in such "car" situations and also in the case where the search criteria results in large list (more than 3-4 items) which requires a scroll (flip scroll) and/or hiding the dialing pad to see the full list. Currently I've mapped the Vol Up/Down keys for up/down directions with AEButtons but it's not very convenient / comfortable.
I'll try to make some kind of screen shot to show what exactly I mean but I believe you get the point.
Here are the screen shots - the original and the modified (using paint)
It would be great if somebody can make such a dialer ... or explain what I need to make it myself. (the arrow buttons should stay visible when one hides the dialer ... or when the user presses them to start moving the "focused" contact just as if hardware arrows are pressed).
pankov said:
Here are the screen shots - the original and the modified (using paint)
It would be great if somebody can make such a dialer ... or explain what I need to make it myself. (the arrow buttons should stay visible when one hides the dialer ... or when the user presses them to start moving the "focused" contact just as if hardware arrows are pressed).
Click to expand...
Click to collapse
I'm not sure but I don't think I can do it. I'm not to good at editing those resource dll files.
Someone like RyanMogul6800, or Fards, would know about this. Maybe senf one of them a PM.

[Q] History Item Editing

I just got my Droid Pro and I'm loving it. My old Galaxy phone had arrow keys and I'm getting used to not having them on the DP. I can't figure out how to do something that used to be easy on the Galaxy.
In certain apps that have history lists, like the Market app, I could easily modify an existing search term by using the down arrow key to auto-fill it, and then edit the text and search for it. On the DP this doesn't seem possible since I can't arrow down, and if I touch the history item it immediately searches on it, and then I can't edit the search term.
For example, say I search the market for "volume" but don't find anything useful so I need to search again. On my Galaxy I could just type "v" and the history list would show "volume", I click the down arrow once to fill the search box with that and then type " scroll" after that, to search for "volume scroll".
Is there any way to do this on the DP? I've googled a while but its not an easy thing to search for, haven't found anything on how to do this.
Well, after hours of googling and testing, I found some solutions. There are a number of virtual d-pad and trackball apps out there, but I wanted something a little more seamless. I found ButtonRemapper (http://forum.xda-developers.com/showthread.php?t=850464) and I used it to remap the Voice key on my DP, and now that key is equivalent to the down-arrow key.
Sigh of happiness. Now I can keep my fingers on the keyboard when filling out forms on a web page, so no more type then touch then type then touch then type. And I can edit history list items like form-fill and such, so I don't have to keep re-typing my searches to modify them.
I still haven't found what I'm really looking for... I'd like a way to dynamically remap hard keys. For example, if I'm in the Market app or a web browser, the volume rocker would get converted into up and down arrow keys. If I'm not in those apps then the volume keys would act normally and adjust the volume.

Categories

Resources