I need a copy of repllog.exe - 8525, TyTN, MDA Vario II, JasJam General

In an attempt to prevent activesync from automagically starting i overwrote my repllog.exe with a file that does nothing. Somehow the copy of the file that i copied to my storage card before i did this has disappeared. Can someone please give me a copy of this file. I am running cingular 1.34 rom (dont know if theres any difference between roms regarding this file).

Related

Big storage rom upgrade

I have just installed this on I-jam. Thank you for the rom. I now seem to be missing the program which allowed me to assign photos and backgrounds to contacts. Is there any way of getting this back or can you recommend another program I can use in its place?
The advantage of the Big Storage hack is that the storage area is now accessible for other purposes and that you can select which softare to install from the Extended ROM. You'll find various Extended ROM versions in the ftp server. The cab file that you are looking for is called Caller ID.
I am trying to install the phone dialler software but is comes up with iacaller.dll in use, how do i install it, any help appreciated..
phonepad
can anyone tell me how to uninstall this please
in order to remove the iacaller.dll from use, try removing it from your \windows\startup folder, then soft-reset. Then you should be able to run the cab file. However there will be several other *.dll that need to be replaced but are read-only. What you have to do is manually rename those to something else (I just put a OLD_ in front of the name). Do this either through the the activesync explorer or you can select to "view all files" from your pocket pc file explorer. I don't remember the ones that need to be renamed, I had a list but who knows where it is now... So you'll have to rename them one by one as the device prompts you. so for example it'll say name.dll is in use cannot copy - remember the name of the file, exit the installer (or most likely the installer will exit itself) then go into the \windows folder, locate the file, rename it to OLD_XXX.dll then run the cab again. Repeat as necessary. Good luck.

Autoinstall a set of CABs (possible?)

Hi, i have updated my device to the mr. clean image.
Now i have to install all software. So i create a folder on my storage card with all necessary cab files.
Is there a possibility to have them all be installed with one click? For example to create a Batch to install them one after another?
Hope not to ask silly questions.
TheGulOfDedra
try this;
example;
This '\Storage Card\2577\autorun.exe' is an official M$ way of autolaunching programs from SD card, well described in MSDN...
If you put calc.exe into this folder and will rename it to autorun.exe, it will be automatically launched upon inserting this SD card in. So your calculator will pop up...
make a folder in the root of the sd card called [2577] put the cab files into the folder ,reboot the device .it should install,
alternative; use the autorun from the extended-rom to launch the files.you my need to do some editing intiothe config file.
Thanks - how can i "see" the extended rom? Editing a config file is no problem for me.
TheGulOfDedra said:
Thanks - how can i "see" the extended rom? Editing a config file is no problem for me.
Click to expand...
Click to collapse
use "TOTALCOMANDER"
download ,install then open the prog ,write the folowing in totalcomander,[extended_rom] now you should see the contents of the extendedrom,you can use totalcomander to copy any file to any location.
download from here; http://www.ghisler.com/ce.htm
thank you very much to all
Problem is...all your CABS will be installed to their default installation directory (mostly Main Storage).
What I would like to know is how to make all CABS install to the Storage Card or a directory specified in the config.text?

Deleting some files

Hi,
Can I unlock files from Windows directory , for example: camera.exe and delete them. When I try to delete this file I receive an error. There are any programs for unlocking or I must edit ROM? And last question, if i delete this file, it will be more memory available?
I have HTC Charmer with WM5.
files located in the rom cant be deleted and if they could it would not add memory for applications or storage

How to copy .dll files from the device?

I tried to copy a bunch of .dll files from \Windows
I encountered a couple of problems doing that:
1. Some files are not shown on the PC in Windows Explorer though I've enabled viewing hidden and system files. However, these files are shown on the device in Resco Explorer, but can't be copied to e.g. \Storage Card
2. Some files are shown on PC in Windows Explorer but are in use and therefore can't be copied
What are the tricks to back up those files?
PS: My device (S710 Vox) is unlocked using M$ Security Manager
No tricks.
If you bothered to learn anything about your device you would know that these files are part of ROM and can not be copied out.
Don't mean to be rude but this was asked and answered many times before. Do a search on "ROM dump"
Yeah stupid me...
Dumped the ROM and got the files I want
(http://wiki.xda-developers.com/index.php?pagename=Vox_HowToDumpRom)
Actually I can't find coredll.dll in my ROM dump.
I used viewimgfs.exe to dump Part02. I can't use viewimgfs.exe on Part00 and Part01.
Is there another tool which can retrieve coredll.dll and perhaps other missing files?
Another question: can the S710 be flashed by using imgfs tools v1.82 to create the image(s) and a generic HTC flash tool?

How to copy file with 'ROM' attribute? (or how to change that file attribute?)

Hello,
I am trying to copy a file (from my smartphone to SD card), which have a 'ROM' attribute set and... it is impossible - acces denied is showed (even in Resco Explorer, Total Commander). I can't even change that attribute.
Please help me to find any solution
Best greetings,
RA
You should be able to extract files from the ROM file on your PC thanks to the tools provided in one of the sticky about ROMs modifications.
Unfortunatelly...
Cricri said:
You should be able to extract files from the ROM file on your PC thanks to the tools provided in one of the sticky about ROMs modifications.
Click to expand...
Click to collapse
I have extracted an 'nb' file from my ROM file, but WinImage can't open it ("not FAT16, FAT32 file"). It is WM6 image file, what tools to open this 'nb' file?
Best greetings,
RA
I, too, am trying to find a way to copy some ROM attributed files.
Ultimately, I am trying to move/copy some apps from one smartphone (WM5) to another (WM6). Is there a way to copy them to a zip file and move the files that way or maybe even using a backup copy (i.e. using Sprite Backup?) and restoring to a different phone?
Any help or direction would be appreciated. If there is another thread out there, please be sure to point me to it since searching brings up a lot of different threads.
u need to extract the rom.
Funny, but you make it sound so easy... ;-) I've been searching to figure out how to do that and found some instructions I'm hoping I can follow for the one phone, but not sure it it will apply to the old phone (WM5). If I do manage to dump the ROM, where does it go and does it extract the files in cab format for easy upload?
Update: I found a file extractor at http://pdaphonehome.com/forums/ppc-6700-xv6700/56057-6700-rom-dump.html which may have originally come from Buzz... (thanks Buzz!)? so now I have all the files and modules off the old phone, but am running into some issues installing. I can transfer the files indirectly, and can find the specific application file, but when trying to run the app, it tells me that it's still missing files to enable the program. Any ideas on how to determine which files they might be or how to install the files via Activesync?

Categories

Resources