Hi xda2 users, I dont seem able to find a thread on this issue. Perharps I have wrong configuration.
The problem is this. Got sms-es, but unable to view the sender in the inbox. It display the sender's full phone number instead. It is not wise if we have to guess or find in the contacts.
Since we are in XDA2, anyone using photo contacts? I remove caller_id at startup and is it why it wont work? Hehe, try for fun. Thanks.
Well, I am able to see caller name from the Contacts (not sim card) when the person call. So, I dont think this is a problem of me removing caller id at start up. Could it be that the format for the humber in contacts and sms inbox is different?
For example, my contacts number format is (016) 123-4567. Tested that it can be used to call, too lazy to change all to normal number since this is previous iPaq format. Meanwhile sms inbox no is of +0161234567.
Please advise. Thanks.
Hehe, it is solved :lol: I type wrong phone number for testing. Hehe.
Hi Everybody.
I got a little suggestion for a tool.
When I'm getting Calls, sometimes the names are not shown cause the number is in a different form in my contacts. For example +49941123456 calls but in my contacts it's 0941123456 so the number is not realized. Or if anybody asks me do you know this number I have no possibillity to search for it.
A tool to search the phonebook for nubers would be great.
Also I'm missing a send contact function. When I want to share one or more contacts via bluetooth. (Infrared already works for singel contacts). And ther is no possibillity to copy a a whole contact's information. Its only possible to copy a single line.
A tool to that could copy contacts and send them via sms and bt would be great.
Thank you ver much.
Alex
sending contacts thru BT is possible.
choose 'Beam contact' just as you would thru IR.
then this would appear :
Infrared .... Align ports
Searching
As soon as anonther BT enabled device is in range it will appear there, just 'Tap to Send' hé voila
pocket Informant lets you search on anything, even partial numbers
Thank you very much for your info.
Alex
Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.
Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:
Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP
on my bt800 don´t show the name of the caller
Same here on my BT800 no name just number
hi,
i've tried out the software but i can't activate voice dial now. how can do?
bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.
please give me a hand to resolve this problem with vocal dialing.
marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.
ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian
nothing..
not vocal dialing
BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.
Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release
I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.
Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.
Guys,
I've posted this before but nobody has helped me yet.
Basically put I have a couple of contacts for which I have more than one contact number (home, Mobile etc..)
Anyway, when i receive a call from one of these contacts, the name is not resolved, the picture is not shown and the custom ringtone I have chosen (all by vanilla stock rom means) does not ring!!
I have seen this happen with "Exact" matches to contacts in my Contacts list and also if I have entered the number as "+447760....." instead of using the default "07760...." prefix for UK mobile numbers (as I'm abroad a lot so need to use that to dial them) it also refuses to recognise that they are in fact the same number - something my Artemis did without an issue.
Please help me resolve this - it's ruining my HD experience!
Thanks
21 views and no replies - come on guys please - going on a trip tomorrow and I need this to be sorted if poss - doing my head in!!
I had exactly the same problem on my X1, which I have now sold so I could get a HD. I was on o2 uk using itje's 5.061 rom. What network are you on and which rom and what software have you installed? maybe something we both installed is causing the problem
Right, I'm on a stock rom on an unbranded Touch HHD on the Vodafone network. Programs I've installed are as follows:
Changscreen,
HDTweak
Advanced Config
S K Tools
Battlog
Fingerkeyboard
Resco file Explorer
Very strange - it might have happened since I restored a backup but I doubt it.
Try reducing Phone>Call ID match number in Advanced Config.
I have similar problem... Just installed dutty 3.0X and when i sinchronized all my contacts become duplicated, so i deleted manual only the first ones. And now when someone from the contacts is ringing i dont get picture or his name and I am sure that i have the same number in the contact list. Odd
Anyone have any other ideas about this? Still causing me some considerable pain - I seem to recall it started after I started to reconcile the outlook contacts with my PC - this may have caused a different contact ID (or something?)
same problem and no solutoin... :-(
i managed to fix this by reassigning the phone numbers to the contacts page. It seems to occur when you use 3rd party contact management apps before you have assigned numbers.
Works fine now
mslookout inserts spaces into phone number, and prolly phone cannot recognise incoming number having spaces in phonebook?
I also cant fix it by changing CallIDMatch in the registry. It's bizarre as I have 2 contacts in my favourites: both are now set to No's starting with '0' yet when one texts me, their name shows and when the other does, their number shows. hard and soft resets have also failed to resolve this, HTC helpdesk no use at all, also logged with Windows helpdesk in case it is a microsoft, not htc, problem.
Am keen for other things to try, open to suggestions....
Am disappinted and amazed that what is otherwise a great phone, can't do what cheap cr*ppy phones, can , ie show the name of the person calling or texting.
Have you tried using Advanced Config and increasing Call ID match to 9 or 10?
No caller name when receiving Incoming Call
This may be an old thread, but sometimes the newer ROMs also have the same problem.
This happened to me after updating my from from WM 6.1 to WEH 6.5.3. So, I am updating this thread on how I resolved my problem.
Step 1. Edit the Registry and change the CallIDMatch value to 7 (the original value was 10).
Code:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:00000007
Step 2. Soft Reset (power off and restart)
Before I did this, I needed to copy my contacts from SIM to the Outlook Contacts list, so in my Contacts list, I have "double view" of both lists on the same screen - frustrating.
After this change of the Registry key value, I erased all my contacts from the Outlook Contacts list (use the Hide Sim Contacts function) because I prefer to have my default contacts to be from the SIM card instead of the Outlook Contacts. This way, I can be assured that all newer contacts will be stored on the SIM card and I do not have to worry about losing contacts if I change phones.
Can anyone tell me, how i can change the sort sequence in my car free address list? I can't change it there and didn't find a posibility to change it in WP7.
It must be some kind of registry hack.
i think you might need to be a bit more specific regarding your problem
The only settings i know of on WP7.5 are in
PEOPLE>SETTINGS then scroll down and you have
Sort list by
&
Display names by
Good luck
in the PEOPLE>SETTINGS menu I entered to Sort by lastname and show by lastname, but the car Handfree shows the contacts sorted by first name after contact synchronisation. I didn't have this with the xbmod bttf 2.1.