Attention anybody with Total Commander installed: a request - 8525, TyTN, MDA Vario II, JasJam General

Could someone who has Total Commander installed on their Hermes quickly load it up, find a JPEG image on their device (if you don't have one, just snap a random photo with the camera) and then in Total Commander, tap and hold, go to Properties, go to the Associate tab, and hit Associate... please?
Once in there, could you copy out what values you have set for the image file association, so I can copy them onto my device to get image viewing working again! I installed DAVA 2003 and it's somehow royally screwed up my image assocation settings (all images are loaded in Internet Explorer, except they load completely wrong, the system tries to load them via iexplore.exe with the parameter file\:%1 which of course won't work)... Basically, either screenshot + upload your settings (which work properly of course ), or write them into a reply, just so I can get the right settings again! I reallllllly don't want to have to hard reset just to fix this one problem, but the default file association information is nowhere to be found on the Internet (at least as far as I looked, could be in subscription-only area of MSDN but I don't know and don't have a login anyway, but that site is a minefield anyhow)...
Much kudos and quite possibly a few eBeers will be sent to any person who can help me this quandary!

I'll upload a photo of the settings tonight! Just tried with a SE K610i and the camera is really bad close up!
Phil

If you're after a screencapture app, I got Capture Screen free from fannsoftware.com which does the job alright, dumps the BMPs in the root of your main memory or storage card if you have one installed. 225kb each.
Many thanks for hooking me up with the settings though, it's been driving me NUTS since I managed to bork it! Knew I could rely on this place

Good software that! Here you go.
Phil
edit: would not uload from the tytn

Er.. thanks?
No picture?

for command i have
pimg.exe
for parameter i have
"%1"
Is that what you need?

Bingo!
Works perfectly, thanks to both you guys for taking the time to get the settings for me Can't understand why that application changed the file association settings, cause IEM can't display images in the way it was being made to do... Very annoying.
Muchly appreciated, kudos to you both

Related

Pocket ie try to save jpg instead of displaying them

Hi,
I'm sure there is somebody here that can help me. I've set up my SPV M5000 with some old programs, and they certainly messed up with the registry about file associations.
I can display jpg normaly, but if I try to see a jpg file (ie not embeded into a web page), I get the file save dialog. At first, it was registered to pimg.exe, and I tryed associating to to pocket painter for example, with no luck.
Anybody know the key to place to go back to a normal jpg displaying state for pocket ie?
TIA
I've the same problem.
Mine is the same but I've installed nothing that would affect the file associations...
I think perhaps it's just another of the joyful 'features' of Microsoft's wonderful Pocket Internet Explorer
Does it do the same with a gif or bmp?
V
That's exactly what I had on mine. I didn't get to the bottom of it, but instead did what vijay suggested and created a local html file with the jpg embedded. All I needed was to view a single jpg within PIE (from my webcam). This works fine, but is a workaround only for 1 jpg. I wouldn't want to do this for everything!
Surely one of the File Explorer tools can change the file associations?
I think the problem lies within PIE, when you click a pic it assumes its an attachment and so will save it,
I cant try atm but its worth trying to goto a pic directly ie,
http://www.website.com/picture.jpg
it may well display the image then, not sure, cant test atm. and its not going to be very useful when doing some normal browsing.
Same with Gif. I've teste on a K-Jam, and it display the picture properly in ie. I'm sure there is something messed up in registry
Found the solution
There is a CLSID value missing in HKCR/MIME/Database/Content Type/image/jpg and other gif and jpeg
Add a string value CLSID
{698E3FCA-70C3-11D0-81E8-00A0C90AD21A} and you are set.
@thaihugo
Won't work for me.
I've tried with PHM RegEdit but same behaviour as before.
Can you give us a screen shot of the correct registry key, please?
BTW:
There is another string "Image Filter CLSID" and
there is a "Bits"-key in /gif and /bmp and /jpeg but not in /jpg.
Are these needed too?
OK now it works.
What i've done is:
Created and copied the CLSID mentioned above into
image/bmp
image/gif
image/jpeg
image/jpg
image/pjeg
Copy the "Bits" from /jpeg to /jpg
Created a "Image Filter CLSID" in /jpg with the same content as found in /jpeg
Save, wait and Softreset. -> Works as intended!
I donĀ“t know if i've done to much, but everything works now.
I'm happy. Thank you!
I though it was my programs that would delete this keys, but it seems you need to insert them also. Maybe it is a full system bug? A registry export might be of some help if some other report the same problem.
This still isn't quite working for me...
Can someone explain again EXACTLY what I have to do?
Hmm - interesting stuff - will have to try this.
I assume this isn't going to affect other JPG viewers, eg Opera???
I have the same problem on both Hima and Universal WM2006
Himalaya > TOFCLOCK HIMA WM6 AKU.0.7.0
Universal > Jwrightmcps 9000_WWE_21200_21207_11500
The registry solution proposed doesn't work for me, probably due a different CSLID. Any suggestion?
THX
Many thanks to CouchPotato
@CouchPotato
Thank youuuu, your step by step solution worked fine for me on BA (WM6)
bye,
Ruben

New O2 Exec ROM and OzVGA - Lovers or Enemies?

Has anyone else tried to run OzVGA with the new O2 Exec ROM recently released?
I've now tried twice and both times after rebooting into VGA mode it locks on the image with what looks like the sun. I can see the Select and Exit today buttons across the bottom but thats it.
Oh and the signal LED is flashing so at least something is working.
No response from the device at all.
Please tell me someone has seen this and has a fix - I dont think I could handle another hard rest again.
Didn't have these problems with the iMate ROM.
TIA
Jason
ozVGA does not work on the new EXEC/Dopod ROM.
Try another one as attached. I have tested it and it works great!
Bought my XDA Exec a week ago and had been struggling to install OzVGA via downloads from other threads here. Saw your posts here, gave it a go, worked first time. Thanks for the pointer.
Only a small number of font issues with the built-in monitor programs, but the main apps seem to display well. Only unexpected quirk for me is that I can no longer get a fingernail to the Close (red cross) button in the top-right-hand corner - the bezel gets in the way! Still, I'm prepared to sharpen my nails as per a recent thread!
Any clues as to the source - is it a variant of OzVGA, or a different product?
Will this work with the QTEK ROM or is this just specific for O2?
WM5 Changes
Start -> Settings -> Screen -> Text Size -> set to one before Largest (doesn't change much but it does help)
ozVGA settings
Fonts
MenuBar Font: Bold 900
System Font: 1200
Hor./Ver. Scrollbar, Min Scrl Thumb: 20
ozVGA: 750, 900, 975, 1200, 1500
Here is the file you need and the instructions. The only difference is that you should not use the files contained in the "Windows Folder Files" of the .rar but download the new and updated dll files for AKU2 from here:VGA files
Extra step: Create a shortcut to VJBigPhoneRes in \windows\startup
Notes:
1. Backup so you don't have to hard reset if anything goes wrong.
2. Before replacing the files in \windows with the ones contained in "vgasystemfiles" make sure you backup the originals.
3. WM5 do not allow overwriting ROM files from your PC. You can however move the files to your SD and do it from there.
4. You will get a new icon on the bottom right hand corner, for VJBigPhoneRes. If for any reason the phone app does not appear correctly just tap on it and "Load and fix phone".
5. The only phone buttons that do not appear correctly are on the PIN input screen but that's not really an issues since you can type the pin and hit enter.
Hope this helps.
Joanna
i've tried this on my O2 exec with what so far seems to be a large ammount of success here. (following the instructions in the last post).
I have reco explorer installed so it makes overwriting the rom based files (power.exe etc).
I recommend that you use something like spb backup to back the device up in its entirity before you do this!
Also it would be good if we had a revert application for the phone vbj stuff but for now , hey , it works if you have a spare 10 minutes to set it up.
I surfed to one of my regular sites via opera and it looks excellent on par with the Zaurus SL-3200 runing firefox.
Previously when i tried this alot of the GFX were mangled. so far i've only found a little bit of mangled GFX.
Hudsons IP Dashboard ends up getting a bit squished but its nothing that ruins the uses of the app. Also looks like the bottom right hand corner of active sync has a little bit of corruption. but its not as if it makes the device un-usable.
I'm looking at it now and it looks EXCELLENT! The one thing that concerns me is battery drain, i would have thought this will effect the battery with it having to draw more of a screen now but i'll keep a check on it.
I'm running the latest 02 rom so I can confirm a large ammount of success and if you use spb backup you can easily restore the device should you need to..
to be fair though, you need good eye sight, i've turned the font up to biggest and it still looks good (also helps a little with spacing).
have a bash, don't be scared!
Help
Hello Guys,
I'm a newbie here, so can you please walk with me step by step?
I read about it and I liked its features but when I downloaded it and ran it, installed it on my Universal (Orange), nothing has changed, and I didnt find where it was installed on my Universal, so can you please tell me why, what, how & where?
Thanx guyz
Cheerz
Re: Help
CerberuS said:
Hello Guys,
I'm a newbie here, so can you please walk with me step by step?
I read about it and I liked its features but when I downloaded it and ran it, installed it on my Universal (Orange), nothing has changed, and I didnt find where it was installed on my Universal, so can you please tell me why, what, how & where?
Thanx guyz
Cheerz
Click to expand...
Click to collapse
It works fine now, I had to go into the TEMP and install it
I am happy
thank you all
CerberuS
joannaex said:
WM5 Changes
Start -> Settings -> Screen -> Text Size -> set to one before Largest (doesn't change much but it does help)
ozVGA settings
Fonts
MenuBar Font: Bold 900
System Font: 1200
Hor./Ver. Scrollbar, Min Scrl Thumb: 20
ozVGA: 750, 900, 975, 1200, 1500
Here is the file you need and the instructions. The only difference is that you should not use the files contained in the "Windows Folder Files" of the .rar but download the new and updated dll files for AKU2 from here:VGA files
Extra step: Create a shortcut to VJBigPhoneRes in \windows\startup
Notes:
1. Backup so you don't have to hard reset if anything goes wrong.
2. Before replacing the files in \windows with the ones contained in "vgasystemfiles" make sure you backup the originals.
3. WM5 do not allow overwriting ROM files from your PC. You can however move the files to your SD and do it from there.
4. You will get a new icon on the bottom right hand corner, for VJBigPhoneRes. If for any reason the phone app does not appear correctly just tap on it and "Load and fix phone".
5. The only phone buttons that do not appear correctly are on the PIN input screen but that's not really an issues since you can type the pin and hit enter.
Hope this helps.
Joanna
Click to expand...
Click to collapse
i tried that, but it wone lest em copythe backlight files etc as the files are read only etc? hoe can i replace them?
anyone? i cant figure it out, or if the worst comes to the worst, how do you remove it? or is that hard reset time?
You can copy the files from the SD into the main memory with Resco Explorer. It will allow you to overwrite ROM files.
The file download now seems to be 404 for me. Please could someone else kindly upload the files so I can have some fun too :]
-EDIT-
Managed to find what was needed. Thanks

My Pictures - Default To Storage Card?

When I open the My Pictures app in WM5, is there a way to make it default to the folder on my storage card, instead of the My Pictures on internal memory?
I am having the same problem.
Pictures save onto my storage card, but the viewer does not default to display pictures from there. Also frustrating is that I click the pull-down location chooser and choose Storage Card but it does not take effect unless I pick another location first -- it just ignores my click.
I have found that My Pictures & Video stores registry entries of folder locations for both internal & storage card, and have tried making them both on the storage card, to no avail.
Does anybody have a solution to this problem?
It is indeed a problem for those of us who store our photos & video on the storage card, as I cannot use the nice feature "Play screensaver when connected to my PC and idle for 2 minutes"
No one knows a way around this problem? Surely there must be a reg edit or something that could do the trick?
Still looking for a solution to this!
Can anyone figure this out? It is quite annoying having to use the stylus every time to re-naviage to my picture folder... :shock:
Can anyone figure this out? It is quite annoying having to use the stylus every time to re-naviage to my picture folder... :shock:
malatesta said:
Can anyone figure this out? It is quite annoying having to use the stylus every time to re-naviage to my picture folder... :shock:
Click to expand...
Click to collapse
Don't think there is a fix for this - tried various registry tweaks with no joy - I think the default directory is hard coded into the picture viewer software.
I use Xnview pocket as my default viewer and its much better and faster than the default one and you can change directory to where ever you want. & its free http://forum.xda-developers.com/download.php?id=12698
I've read lots of good things about XnView...but one question: does it have WM5 soft key controls? I though it didn't but haven't used it myself.
I've tried lots of pic apps (Resco, SplashPhoto, PictPocket LE) but either they are not WM5 compatible (Resco) have annyoing menus (Splash) or don't have a resize option for emailing (PicktPocket).
I'm trying to avoid using the stylus.
The default pic applicaton in WM5 is slow as hell but I like the simple editing controls, basic soft key functions (could be better, like selecting directory) and how it resizes any pics for emailing.
If I could find something that did all of that I'd be happy!
malatesta said:
I've read lots of good things about XnView...but one question: does it have WM5 soft key controls? I though it didn't but haven't used it myself.
I've tried lots of pic apps (Resco, SplashPhoto, PictPocket LE) but either they are not WM5 compatible (Resco) have annyoing menus (Splash) or don't have a resize option for emailing (PicktPocket).
I'm trying to avoid using the stylus.
The default pic applicaton in WM5 is slow as hell but I like the simple editing controls, basic soft key functions (could be better, like selecting directory) and how it resizes any pics for emailing.
If I could find something that did all of that I'd be happy!
Click to expand...
Click to collapse
Xnview does not have soft key control but i find its speed more than makes up for this. It does not have direct email control but can resize the image to what ever size you need and many other image manipulations. It is also able to capture screens - and its zooming is better than the default one, plus you can have a slideshow with mp3 music.

No file association for pictures

Hi, I just discovered that there is no association for any of my pictures, including those on my storage card. Does anyone know how this happened, and can this be fixed without a hard re-set?
Thanks!
Cingular 8125
2.25.11.1
Try in file explorer going to one of the photo files and then clicking on the menu button and then on open path and then put in the path box windows\start menu\programs\ pictures and videos and see if that doesn't associate the files with pics and vids again. I remember having to do that sound files before once in WM 2003 and it only took one file to associate with it to associate all them again. Hopefully that's all it will take in WM5 or WM6, whichever you're using.
Just an afterthought, did you try running pics and vids and see if it wouldn't just find those files and associate them with it?
xeno1 said:
Try in file explorer going to one of the photo files and then clicking on the menu button and then on open path and then put in the path box windows\start menu\programs\ pictures and videos and see if that doesn't associate the files with pics and vids again. I remember having to do that sound files before once in WM 2003 and it only took one file to associate with it to associate all them again. Hopefully that's all it will take in WM5 or WM6, whichever you're using.
Just an afterthought, did you try running pics and vids and see if it wouldn't just find those files and associate them with it?
Click to expand...
Click to collapse
I ran pictures and videos, and was able to view the pictures in my pictures main memory, my pics, storage card, but the pictures still had the white icon with the windows logo in the center. I could not view by tapping directly on the picture. Any how after aggravation, I did a hard re-set that I didn't want to do. I saw open new path, but didn't know what to put in for the path. Now I know thanks to you if it ever happens again.
Thank You!
Cingular 8125
2.25.11.1
No problem. That kind of problem doesn't seem to happen very often, so hopefully you won't have to do that again. If it does though, it may be caused by software that you have installed.
xeno1 said:
No problem. That kind of problem doesn't seem to happen very often, so hopefully you won't have to do that again. If it does though, it may be caused by software that you have installed.
Click to expand...
Click to collapse
As a matter of fact, I installed XN viewer for photos, and with all the options that were available, I must've some how associated the viewer with my pictures, and when I removed the program, I removed the default association as well. Live and Learn!
8125
2.25.11.1

MyFavs Disappeared after multiple hard resets...?

I did about 3 hard reset to the phone (for testing purposes), and all the sudden the myfavs program does not appear after I did the hard reset the 4th time, I did the hard reset about 2 more times and it did not restore the myfavs program (it suppose to back to its factory settings)
Now I keep getting "your myfaves contacts have been restored" text message every time time I turn on the phone (keeps pilling up with this same text message)which your suppose to only get once.
under the memory setting; storage & program seems to have the exactly same file size as when i had myfavs before.
What can I do? all I want is the default factory settings.. help me.
Hah! You survived longer than I did with it. I hard reset once just to clean my phone up before I started messing with anything (messing with the ROM, etc.) and the MyFaves app disappeared completely from the little tray bar at the bottom and the Today Screen.
Interestingly if you dig around with the file browser in the \windows\ directory I can see all the MyFav5 related applications, but nothing launches.
I'm tempted to try the RUU but to be honest the MyFaves program just ate a ton of memory and resulted in me calling people on accident when I had the Today Screen Plug-in active. So as long as the plan still gets accounted correctly (read as: I don't get charged for calling my 5 people),I don't really care.
I thought I'd let you know you aren't the only one out there with the exact same problem. I would like a solution but it isn't mission critical for me.
I found a solution to your problem. I'll do some more testing later. For now:
Could you look in your \Windows\ directory of your phone and tell me what "My*" applications and files are listed there? (You might have to make the basic file explorer show all files by using Menu>Show All Files).
All the "My" files that are in windows directory (revised & no file missing or mistyped). The some files are repeated to I placed the filesize next to them.
My5_Land
My5_Land.swf.0409
My5_Port.swf.0409
My5app
My5Client
My5ControllerPanelPlugin
My5MsgCenter 138k
My5MsgCenter 30b
My5PimProvider
My5service
My5Today_MaskCircle
My5Today_MaskRing
MyFave
MyFaves 19.1k
MyFaves 29b
MyFaves_add
MyFaves_hourglass
MyFaves_PhCDefault
MyFaves_sihouette
MyFavesApp_3DMask
MyFavesApp_74x743DMask
MyFavesApp_ContactMask
MyFaves-plugin
MyFavTodayPlugin
Myinfo.96
Extreme184X said:
All the "My" files that are in windows directory (revised & no file missing or mistyped). The some files are repeated to I placed the filesize next to them.
My5_Land
My5_Land.swf.0409
My5_Port.swf.0409
My5app
My5Client
My5ControllerPanelPlugin
My5MsgCenter 138k
My5MsgCenter 30b
My5PimProvider
My5service
My5Today_MaskCircle
My5Today_MaskRing
MyFave
MyFaves 19.1k
MyFaves 29b
MyFaves_add
MyFaves_hourglass
MyFaves_PhCDefault
MyFaves_sihouette
MyFavesApp_3DMask
MyFavesApp_74x743DMask
MyFavesApp_ContactMask
MyFaves-plugin
MyFavTodayPlugin
Myinfo.96
Click to expand...
Click to collapse
My5Service.exe is the key application. I wanted to make sure you had all the bits to the MyFaves program. The reason you see duplicate names with different file sizes is that the File Explorer program that you have on your hand held suppresses extensions of files for whatever idea.
Now then to fix your problem you are going to need to edit the registry of your device (I used total commander, the .CAB is in one of the Useful cab threads).
A key is missing from the registry after hard reset. WOO!!
Go to \\registry\\HKLM\init\ (using total commander's akward directory structure style)
You then have to add a new key, I used "Launch94" as I was noticing most of the T-Mo crapware was using the Launch9# series of keys
Then edit the key's data to be: My5Service.exe (Must be spelled correctly)
Basically what you did was add in a registry key that tells windows to load up the MyFaves service at boot so all the my faves apps will initialize properly. Putting My5Service.exe into the \windows\startup\ folder doesn't work (I tried it initially).
Soft reset and the phone will act wonky for a second as it is refreshing itself, don't panic. A box popped up saying "MyFaves display set to ON" and all was well at that point.
Then, since you want factory default I'd just remove Total Commander using the add/remove programs feature.
Good lookin out!!!
thanks alot, it did it and it worked.
I made an attemp to reformat the phone again, and myfavs appeared. Funny How I never managed to get that total commander for this phone. Lol im an experience user with registries (now gonna experiment with the register editor an tweak the phone to make phone faster and remove useless I don't need)
Thanks lot you have been helpful and gave fast support!!
Ah well no insult to your ability or experience was meant. I try to be as specific in my write ups as possible so others who might have the same problem can understand the solution, regardless of ability. Tends to make my life at work a lot easier when I do that so it's become a bit of a habit.
Glad it worked for ya and I'm actually surprised it survived another format. But hey all it says is there is some glitchy code in the re-install portion T-Mo has built.
Extreme184X said:
(now gonna experiment with the register editor an tweak the phone to make phone faster and remove useless I don't need)
Thanks lot you have been helpful and gave fast support!!
Click to expand...
Click to collapse
By the way, let me know what tweaks you try. I'd be interested in them myself.
Good seeing people help each other out. The speed tweaks are everywhere, but to remove things you have to recook and flash your phone. (Alternatively, you can flash one of the many available ROMs our cooks have already made or made a custom one based on my own through the link on my signature.)
i got a quick Question how about trying to add it to a already cooked rom is that possible ? bc i love the PDAVIET-ROM BUILD 20931.1.5.0.PV(uploaded) rom but the myfaves tab dont work
does anyone have the my faves.cab?

Categories

Resources