Hello everyone,
I have a simple question.. does anyone know what's the maximum capacity of the external SD memory card ??
1 GB ? 2 GB ? less or more..
thanks.
oops
and yes am sorry for not checkin out the thread I found on WM6 section
cheers.
MMC card working
Hi,
I have A-Data 4GB Turbo MMCplus 200x card working in my Qtek9000, WM5/6!
So a 4gb SD works on the Universal?
Yep, I've got a 4gb sd card in my Universal and it works fine. As I understand it 4gb is the maximum.
I'm looking for 4 Gb miniSD/SD
But all the cards I see are the new SDHC class 2/6 sd2.0
I was under the impression that those won't work well/at all in the uni because it only supports sd1.1
SDHC will not work. However there are 4GB SD cards, probally the wrong side of the world for you, but here is where I bought my 4GB card.
Hello,
i use Sandisk 8GB class2 memory card on my Tattoo. It is a nightmare. I got serveral error messages like "SD card damaged, need to format, cannot save photo's etc." I have formatted the card but without any luck.....! Can somebody advise what card or classes are compatible with the HTC Tattoo?
Thanks a lot,
Mark
Have same problem with sandisk 4gb tried almost everything but no luck
I've got a Sandisk Mobile Ultra 8Gb Class 2.
Had it in my Tattoo for six months and its been perfect, never a fault.
- Mark
Does your SD card work perfectly with Windows Phone 7?
If so, which capacity, brand, model and where did you buy it?
If not, what problem did you run in to, and which capacity, brand, model and where did you buy it?
NOT WORKING
Play.com 32gb SDHC (Unbranded / White label) here.
It seems to be incompatible with MAGLDR - it does not function in Mass Storage mode or in the SD boot mode.
When booting WP7, the phone just reboots after the Dark Forces logo is shown.
RickAstley said:
NOT WORKING
Play.com 32gb SDHC (Unbranded / White label) here.
It seems to be incompatible with MAGLDR - it does not function in Mass Storage mode or in the SD boot mode.
When booting WP7, the phone just reboots after the Dark Forces logo is shown.
Click to expand...
Click to collapse
doesnt even work with magldr?? try formatting it on pc using panasonic sd formatter..
when it starts working on mass storage mode then perform the test on whether it will work on wp7 or not
----------------------------------
and to OP, transcend 2gb has issues for me.. sometimes wifi doesnt work.. sometimes it does but then wp7 gets really laggy and sooner or later just turns off (sometimes even hardresets)
multiple hardreset retries and it always ends up with the above issues.
Got mine with my HD2 TMobile usa, Scandisk 16 GB HC , WORKS EXCELLENT
Kingston 16gb, class 4 works fine. No problems... At least, not yet...
kingston sdhc 8gb class(4) - capacity avaible but phone have lags. reflashing wp7 nothing change
kingston sd 1gb - work fine
Kingston 8 Gb SDHC (Class 6) - Works great.
SanDisk 2 Gb - Works Ok.
Kingston 4 Gb SDHC (Class 6) - Works but is laggy when installing and running apps
jjblaster3 said:
doesnt even work with magldr?? try formatting it on pc using panasonic sd formatter..
when it starts working on mass storage mode then perform the test on whether it will work on wp7 or not.
Click to expand...
Click to collapse
I've tried that. It seems that there is an issue with MAGLDR - android, windows (PC) both see the card and read from it fine.
Perhaps MAGLDR doesn't like 32gb cards?
let me tell you..
I formatted my sd card in a thousand ways with all sorts of programs
NOTHING WORKED
you must have your SD card inside the phone when installing WP7,
then WP7 customises it and you are on.
Really strange though, I can sync in Zune but I can't view my SD card when I get it out of the phone.
Sd not working
I have the replacement SD from Samsung Class 2 16GB
It works with WM and Android, but not WP7
Honestly, I cant even find the location where I see the SD in WP7.
I keep getting the "Out of Space" message and I have to reboot to even get text.
Any ideas for some of this?
[UPDATE]
Fixed after reformatting the SD using my Camera, Then putting in the phone, and Re-flashing WP7
If your SD card was inserted when you first installed WM, then it's simply incompatible.
On the first boot, WM will format the card and initialise it for use. If it's not compatible, no go.
sandisk ultra 16GB (class 4), working fine
Sandisk 32GB class 2, working perfectly on phone
Sandisk 2GB class 2 did not work
Sandisk 1GB class 2 did not work either....
???
ultramag69 said:
Kingston 16gb, class 4 works fine. No problems... At least, not yet...
Click to expand...
Click to collapse
I have one of these, when used to for WP7 i crashes and reboots at DFT screen
Could you provide format information, Fat16/32 & Cluster size
Tested SD cards
Working:
Kingston 4GB SDHC Class 4
Not working:
Kingston 8GB SDHC Class 4
Transcend 8GB SDHC Class 6
Verbatim 8GB SDHC Class 4
mario221975 said:
Got mine with my HD2 TMobile usa, Scandisk 16 GB HC , WORKS EXCELLENT
Click to expand...
Click to collapse
Same here. Works great!
WORKING
Sandisk Class 2 1gb
Sandisk Class 2 2gb-had some issues while shutdown
Sandisk Class 2 8gb
Sandisk Class 2 16gb
tested myself on 2 diff hd2(7)
hope it helps some one!
There is no pattern here.
Opening up this 2nd thread about SD cards is pointless and serves to do nothing but confuse, as it has been shown that two people with exactly the same cards can get very different results.
Suggest people just buy through trial and error/returning incompatible cards while waiting for some WP7 certified cards to come on the market. The fact that they havnt yet says alot.
Not working:
Transcend 8GB SDHC Class 6
Hi,
I saw 2-3 threads with the same question in xda and other place but none of them answered...
So problem is that after partitioning my sd card (512mb ext) my sd card start to work slower than before, my sd card is a-data 8gb class 6 and i got 9.5mb/s write speed with adaptor and now i got something between 300kb/s - 1.7mb/s why?
is there anyone who has this problem too?
bump... no one has this problem?
As the title implies: Has anybody tried sd cards beyond 128gb on this phone and did it work?
bump
Since the question hasn't been answered yet...
and maybe nobody try to use beyond the 64Gb nor the 128Gb (yet).. I use only 16Gb of external memory in this MiA1
I've tried it, SDXC card from SanDisk. Works just fine.
I use 200 gb Sandisk (fat32 formatted) memory card, works well.