I don't understand why the wiz sometimes crawls to a halt, but I don't want to hard reset and have to set-up all the options again so I'm checking.
i dont see the point in it anyway considering there are next to no pda virus's and the AV software doesnt update its signitures so if anything DID come out that was malicious you wouldnt be protected.
odd
Well, I've gone ahead and restarted from scratch (hard reset) without the AV and some of the unneeded carrier settings.
I will report with my findings in 24 hours. I can't tell immediately because of the nature of the slow-downs on the Wizard, i.e. it works fine for hours and then starts freaking out.
For some reason , mine was never on my Jam from day one. It shows in the Extended ROM but never installed . When I installed manually it did instal . I think the reason why it stoped on install was because it aks to download the signitures from Imate ... and so stops the Instal
I removed the file foe av. hart reset. since then my k-kam uk model has run so smooth and fast that the speed on everything I do has improved. also installed pocket pc plus 3.0.1 and disabeled safe mode.'
compared to orignal slow refresh rate and speed. now it runs like it should.
thanks to the xda developers and contributers. . even skype now works faster and better.
well, I've been playing around with it for 3-4 hours now after removing the AV and I can NOT get it to slowdown to a crawl like it used to.
As hard as I find it to believe, it does seem like the antivirus (the geniuses at I-mate decided to include) is in fact what is causing the problems.
Sad thing is 99% of people who buy the device will never find out about this. Maybe i-mate will fix the problem though.
In any case, thanks for whoever figured it out! The way it's running now this is the best phone/pda I've ever owned.
is there an easy way to remove the anti-virus files from my KJam?
yes removed from extended rom and hard reset
regards
Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!
Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.
even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.
TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.
TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.
Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R
So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?
Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!
Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply
SO any one on this forums can recoment apache over MDA ?
yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.
Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.
TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.
bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.
Let me just say: I'm not expecting a solution to this - I just want to vent. When I got my Hermes (which I love, of course) I gave my Wizard to my wife (which she loves, of course).
But every time I use her Wizard I notice how much faster it seems. Both units are frequently updated with the latest ROMs and are both now on WM6.. ..but it's so frustrating to see how much 'snappier' the Wizard always seems. Just as an example - pressing the power button makes the Wizard spring into life instantly, whereas the Hermes always has a short pause before it lights up The same goes for dialing and changing tabs in Settings, etc. too.
Oh well. I feel a bit better now I've had a moan.
True, but bring yourself back around by trying to surf with PIE on her's once....
or fire up a 96K music stream and see if TCPMP chokes on her's.....
or tether your laptop and see how well you can surf with it on her wiz...
(hopefully you have 3G coverage where you are)
Oh I know, I know (I get lovely HSPDA most of the time too). But has anyone ever figured out why the Wizard is snappier when Hermes ought to have more powerful hardware?
Something odd goes on when Hermes devices return from powersave. I need to find where that code is too b/c there's some real wonders that can be worked. This internal code does stuff like force portrait mode (a workaround for the magnets in the hermes case that place it in landscape mode), and do some battery power checks (which cause our Hermes not to display the last known battery state). During the execution of this routine, the delay occurs...
The Today screen refresh slowness only occurs when a lot off apps (in particular SPB PP) are installed. I personally think that a Hermes with a clean build is quicker from a response standpoint than a Wizard.
I have PocketBreeze installed - in fact it's the only thing I always install after a clean wipe - and it's the only thing on my Today screen.
If I'm honest, I think I let the fact that there's a delay coming out of power-save totally cloud my judgement. And if it were possible to change that through a hack, I'd be over the moon.
If you and other XDA boffins can crack that one, I'll be happy to make a little contribution for the efforts
Well, I'm coming up to speed on Platform builder after installing it for the ATI patch. This IDE lets me poke around in places I've never poked before (heheheheheh). Unfortunately the tools don't fully work on WM6 yet which is what all my hermes have loaded currently. My 8525 will be freed up soon tho & I'll be able to load a AKU3.3 build and get back to projects like this.
Sleuth255 said:
Well, I'm coming up to speed on Platform builder after installing it for the ATI patch. This IDE lets me poke around in places I've never poked before (heheheheheh). Unfortunately the tools don't fully work on WM6 yet which is what all my hermes have loaded currently. My 8525 will be freed up soon tho & I'll be able to load a AKU3.3 build and get back to projects like this.
Click to expand...
Click to collapse
I would pay for an app that would make the power on time as fast as the Wizard's.
Hi everyone, I'm new here, couple of weeks ago if you'd asked me what a prophet was, I'd I've talked about religion. I was given a hand-me-down imate jamin that i"m trying to get working properly.
The prophet in question was previously working properly without any issues, the previous owner had just gotten a new battery for it when the issues started. The phone slowed down to a crawl, nothing could get done with it, takes like 1 min to open a text msg, around 10sec to answer a phone call. Having gotten it and thinking its a firmware problem, I did a hard reset, nothing, then I upgraded the firmware to the latest JAMin_WWE_213923_2139123_022021_ship.zip again, nothing!
Funnily enough, this behaviour is erratic, do a soft reset, load sktools and the cpu usage app reports that all is fine, give it some time then ka-boom! the cpu usage gets maxed out by device.exe seemingly for no reason.
Anyone here ever seen behaviour like this? If you have or just have a suggestion on what I can try, please post. I'm not sure what to do now since I'm on the latest firmware and I don't know where I can get a rom for wm6 for the phrophet. I"m hoping upgrading to wm6 will fix this issue.
Thanks in advance.
John.
device exe
Same problem with my HCT Diamond.
Dia Duit Rom.
Trying to find a solution!
Firmware
You could try a cooked rom, but make sure you perform a hard SPL first as this will save your prophet from bricking.
The other thing is have you tried a different battery as a bad battery can seriously affect the phones performance espcially if it is a cheap copy.
If your'e worried about flashing have a deep read of the following link
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Hope this helps
Sorry mate, just seen your reply.
The phone eventually died, won't charge, nothing doing, looks like its bricked. I moved to a Kaiser, which then started having 3g problems, though I got a temporary fix by keeping it on 2g.
Now I have a mytouch which needs unlocking. I think me and htc should part ways, I'm yet to have a simple good time with any of their products.
As regards the prophet... is there a way I can resuscitate it? It wont' charge, no light shows either on usb or charging from a normal charger.
Thanks
John
It's not like that. HTC phones work good as long as you keep them good. I'm not saying you didn't keep it good but maybe some softwares ruined your Pocket PC. ANytime this happens, a hard reset and revert from backup should solve most of your problems.
Looking at your Prophet, smells like the battery is dead? Try changing and see if that helps.
Regards,
Carty..
This looks like a day that is going to be special. This phone has been in my drawer over a year now, I'd given up on it long ago. Well I stripped one of my old chargers down to the wire, charged the battery manually for a few mins and presto the phone has come on.
It's still slow as hell, so I see device.exe is still hogging cpu.
Time to review the prophet roms, been a while since I checked on it.
happens the same to me too
for me this issue rises up when i connect with my pc :S
due to the calnot or calpd or poutlook or someother exe ... it streches the cpu usage to a 100%
some ppl say that having the correct time zone helps u out in both, the pc and ppc solves the issue ... well i have windows 7 (UTC) and in ppc (GMT ... using http://forum.xda-developers.com/showthread.php?t=401161 ) does it make any difference ?
now the only option i got is to either hard reset although this happened with my previous ROM too :S