Bluetooth Audio - 8125, K-JAM, P4300, MDA Vario General

I have a simple question. I have an MDA, and I have MC Voice Command installed. It reads me my next appointment as a reminder. Is there a way to make the MDA open an audio channel to my bluetooth headset and read the reminder in my headset?

There is a program available on this board if you search for it. It will open an audio channel and force ALL audio from the MDA to your headset. I initially used this for music, but have since added the stereo bluetooth profile and purchased a headset. It's a nice, small piece of software that seems to fit your purpose. I think it's call BT Toggle or something similar.

Related

MP3 via BlueTooth

I need to listen to MP3s throught the bluetooth headset.
I don't need a good sound quality - it's just for speech.
I just want to play that MP3 continuously (again and again) so I'd be able to put on paper as much as possible.
So is there a way to play a MP3 (or any other sound format) using the BT headset?
i think it require a bluetooth profile which the xda2 dont currently support
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
MP3s through Bluetooth
I have a Plantronics M3000 headset when I bonded it with my XDA II I selected the option for the headset profile from BT Tools. When I switch on the headset mode from the Today Screen I get a bleep on the headset but no audio is transferred to the headset it still comes out of the speaker. Do I need to tweak any other settings?
Im guessing that the Plantronics is not fully compatable with the headset profile.
Thanks for any help.
Paul
Rudegar said:
i think it require a bluetooth profile which the xda2 dont currently support
Click to expand...
Click to collapse
OK. Where can I get the required BT profile? Does the Widcomm driver have it?
It normally works on my PC - I can listen to all sounds form PC throught the BT dongle and BT headset. So it's just a question of driver. Where can I get it for my XDA2?
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
Can u provide more details please? I couldn't find your mentioned headset from Ebay.co.uk
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
how does it handle music ?
i mean does it play one channel of the stereo
or does it play joind mono ?
to me listening to music with 1 ear is pretty useless
can you please also elaborate which rom version ? pocket BT tools installed or not? which BT stack?
the headset and handsfree profile are supported by MOST BT headsets
my jabra 250 suppprts both profiles, but I am never able to channel windows media output through the BT headset ((
so any info would be very insghtful
captin said:
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
Click to expand...
Click to collapse
Hi captin,
I had a look on the website. It didn't mention that the handsfree can support xda2. Also, there's no info at all that it can be used to listen mp3.
Can u show us more how you do it?
Thanks
mp3
ok friend to use your headset with xda2 to lesson to mp3 you need widcomstck you can find in our fourm and kai blutooth headset batch you can buy from handango in 3 dollars and you can give to our fourms instool both and make pairing with your headset and thats work fine but only mono beacuse we need blutooth headset streo and in the market only mono thanks
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
I think you must be the only person on the planet that has mp3 working through bluetooth without any patches/hacks/etc, can you please elaborate more because it doesnt work for anybody else.
I am using a Plantronics M1000 (M1500) with iMate 1.52.00WWE.
With Pocket Bluetooth Tools I can use it for Phone calls but not MP3.
Annoyances are -
1. I can't initiate dialling from teh Headset unless I dial from the phone and then hangup (even if BT permanently on).
2. If I leave BT permanently on the Headset battery goes flat very quickly in standby.
3. If a Call comes in on Call Waiting, the call transfers to the phone and I can't get it back to the Headset
Mike Sydney
Any more news on this? The world waits...
Bluetooth/XDA 11 Integration
Hi Guys,
Just thought I would let you know that New Answer Ltd have done bespoke integration work into Bluetooth headsets. For the application that you are talking about, it is possible to develop an app to run MP audio apps to any bluetooth headset. get intouch with [email protected]
Dan
Yesterday, I tried w/ Kai's Bluetooth Headset patch
I've found that it doesn't work with XDAII.
So, I'm still waiting for the new patch.
Besides, does anyone know what Tobias, Pocket Tools developer, is doing?
I've sent emails to him serveral timee But there is no reply. His website also stop progressing as well.
Headset Profile
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Re: Headset Profile
mlee2 said:
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Click to expand...
Click to collapse
Unfortunately, it's not as simple as just a profile. Since a third party voice dialing software has to be manually added to the XDA II (its not built in), the headset would have no way of knowing which application to "activate" when the headset button was pressed. The only way I see this happening is, if someone can hack the bluetooth stack to detect a headset button press, then route the command to a voice dial software installed on the XDA II. Ideally, the dll would have an interface that would allow you to select the application you want executed when the bluetooth headset button is pressed.
Rumor has it that the iPaq 6300 won't have voice activated dialing either - and it will have the best bluetooth software stack around, the Widcomm stack. If it won't support it, I wouldn't have much hope for the XDA II unless some hacker decides to give it a try. But it sounds like a lot of work.
Reply from South Wing
I sent a email to South Wing about compatibility with the XDA 2 and i got this reply
The XDA II does not support the Bluetooth hands-free profile which is used by the NeoVoice USB headset and gives access to the various hands-free mode features of the device.
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Overall, without the hands-free mode capability, the features you would miss on are only the following ones: rejecting a call, transferring a call to the phone, last number redialing and disconnecting from the phone.
The headset is available online from expansys.com (type NeoVoice in the search box) where you may acquire the USB cable and car charger for little more.
There you have it from the horses mouth, hope this is some help
Michael
Re: Reply from South Wing
mlee2 said:
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Click to expand...
Click to collapse
Hmmm. Interesting. But I still don't see how voice dialing can be supported through the headset. Again, the XDA II has no built in voice dialing software, so there's nothing to standardize on. Therefore, your only option is a third party dialing app. So, if you were to install something like Microsoft's Voice Dial, the headset would have no way of knowing that it needs to call the Microsoft Voice Dial EXE when you press the headset button. Other bluetooth phones that do support voice dial can use headsets that, when you press the headset button, can call standard API's that initiate the voice dialing capability on the phone. The XDA II does not have this standard API set.
Anyway, I'm still more interested in pushing standard sound like MP3's and audio books through the BT headset. But the voice dialing stuff is interesting nonetheless.

Bluetooth headset as earphones

Does anyone know how in WM5 I can make my Plantronics M2500 bluetooth headset, which shows up in bluetooth xection as "headset" work like an external speaker? In pocket2003 on my h6315 I was able to tell it to have all sound, or just phone sound go to my bluetooth, and I rather enjoyed listening to music while working. But I cannot find even half the options in the bluetooth section as in 2003.
Any help would be greatly appreciated.
p.s. loving my MDA.
I found this out by accident. If you are running Microsoft Voice Command, evidently it does not shut down the link to the headset. I have found that if I start playing something (i.e., in Windows Media Player) and then activate Voice Command, and then just let Voice Command time out, the sound will switch to the bluetooth headset.
And Voice Command allows you to control the Media Player, as well!
headset as ear phones
I tried playing my media player then activationg voice command. Sorry didn't work for me. after the voice command timed out, it reverted to the mda speaker. Any thoughts?
There is a utility for this. It comprises 3 programs.
One turns on blutooth as the speaker, one turns it off, and the third toggles it.
I found this somewhere in the forum but can't remember where so I've attached it here.
Copy the programs to your wizard and run them as needed.
do a search for VJVolubilis. That will do what you are looking for also. I stream radio to the headset while at work pretending to be busy!

Wireless Stereo profile (A2DP) with JABRA BT500: Possible???

I've seen many posts about Bluetooth Stereo Headsets showing a Wireless Stereo profile when using A2DP implementation.
But I have a Jabra BT500 mono headset. Is it possible to make it be recognized as a stereo headset, when A2DP is applied?
I used the tweaks described on "A2DP support for 818pro" topic, but the extra option described (Wireless Stereo) doesn't show. I keep getting only the "Hands Free" option.
BTW, I'm using Qtek S200 updated with latest Dopod 818 Pro ROM (contains AKU2 and A2DP).
Enabling A2DP in your ROM will allow the device to connect to A2DP enabled devices in Wireless Stereo mode. When you make a bluetooth connection to a device the phone will query that device to find out what services it offers, then it will report back the ones that it understands and give you the option to connect to them. Since you BT500 is mono it would be pointless for it to have a wireless stereo service stored in its firmware, and why you would want to try connect to it in stereo mode is a bit confusing. If you're trying to use your headset as a mono ear plug for listening to music there is one thing you can do. Get voice command installed, edit the registry to get voice command running when you press the button on your headset (not sure if your S200 supports voice dial but if it does then you should be able to do this), then when you press the B500's button voice command will run and the bluetooth connection to the headset will stay active until you press the button again.

any way to have ringtones on BT headset?

Hi all, I have MDA Pro with BT headset Motorola H500. When I have call, the headset just play its built-in ringtone. I have set different tones for some 'important' contact and want to listen to them on BT headset, is there any software or registry tweak can do it? I used MS Voice Command and it direct the ringtone to the BT headset, but using that program was a huge memory consuming and not useful for a non-native speaker like me. Any help would be appreciated.
PS: sorry for my bad English.
Your headset needs to support the handsfree profile not just the headset profile for this to work.
When I tap & hold on the headset icon, there are 'set as hands free' entry, click on it has no effect, anything i can do to activate handsfree? TIA.
Not unless your headset supports it. If it did, you would hear the ringtones.
I am looking at some specs of the headset, it do support both 'headset' and 'hands free' profiles. But I cannot hear the ringtone of MDA Pro just the default ringtone of the headset. Any ideas? Thx.

Bluetooth headset problem

I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.

Categories

Resources