Related
I have it!!!!! Send me a email and i will send you the file with all the instructions to repair your dead gsm "part" of the xda. it worked with my qtek 1010 and i think that it works with any other. Ricardo Gomes
[email protected]
Could you please post the solution here ?
i´m doing a zip file with all the instrutions and i will put it to download soon. please be patient
the file is ready
you can download the solution for the radio dead problem in http://qtek.no.sapo.pt/repair.zip
Ricardo Gomes
[email protected]
Thanks.
Anyone tried that?
Since my phone is working perfect now, it is nonsense to try that
It didn't work for me.
GREAT!!!!
it worked for me in my qtek 1010.
Mirror on xda-developers
I downloaded Ricardo's repair.zip file and took the liberty of mirroring it on xda-developers, since my download went at a whopping 200 bytes per second.
We've seen this recipe before, and it does appear to fix at least some of the problems caused by RSU upgrades not finishing.
http://xda-developers.com/repair.zip
faild
hi guys
still stop at 1% and showed massage
((flash failed! Press OK restart your device))
any help
hi guys!
I have this problem also.
Still stop at 1% and showed massage
((flash failed! Press OK restart your device))
Just try to do following: start 3.23 ROM update to extract RSUpgrade.sa.CAB and place it to SD card instead of file found in repair.zip.
The situation you describe looks like your device died while flashing new 3.23 version. So you may try to continue process with 3.23 version instead of old one. This is because 3.23 don't allow to "downgrade".
Hi AE !
Where can I find 3.23 ROM file ?
Thx for your helps.
If your device died while trying to upgrade to 3.23 radio, the CAB-file should be found in "C:\Program Files\Radio Stack Upgrade Utility".
My device died while trying to upgrade to radio 3.19 but I trying to copy to SD all Radio upgrade, but don't work. Still stop on 1% and error message is "Flash failed. Press OK to restart device".
Other tips ?
Radi ROM
i have the same pb the alnasser and sebi; i have tried everything; what we need is a new rom version for the radio and not an upgrade; also while using boot loader and if i try to copy the GSM rom from a working phone i got a message saying: connect to RS232 and run PC monitor; i have USB and i do not know what is PC monitor...any ideas???
It worked for me also, but with slight changes
Hi,
The soloution above worked for me after a little trial and error.
I was trying to upgrade to new UK Radio Stack but flash failed in the middle of upgrade (probable because the keyboard popped up onto the screen for no apparant reason, then locked up).
However, after much wailing and gnashing of teeth, I found your website!!
I installed the Files onto an SD card as described above, and although the XDA was going painfully slowly (about 3 mins to warm reset). managed to get to the today screen. I ended up pusing the "record button" repeatedly to try and get some response out of the machine, finally it auto ran the program on the SD card, only to be told that flash failed
Undeterred I repeated the exerscise with the other RSUpgrade.sa.cab
file, this gave the same result!!
However I soon realised that this cab file is kept within the .exe file of the original upgrade I tried to do, so... Using winzip I extracted the relevent RSUpgrade file for my XDA and put that file on the SD card instead.
It Worked!!!
Consequently I conclude that if the file fails or stops at 1% then it must be because it is NOT the correct file for your XDA, you need to use the correct upgrade cab file for you particular XDA.
Hope it helps someone else.
Essentially the watchword is "perseverence".
it starts but stop on 85%??!!
hi i have a dead xda and i'm trying to fix it but it stops on 85% sometimes on 83%,i'm using the copy of cab file to sd card and runnig it from xda anyone can tel me how to get over this?
now it stops on 1%
i have removed it from charger and put the file on the sd card,the progress bar went to 99% then flash failed,now it gives me that message on 1%,how to fix it??!!
Re: it starts but stop on 85%??!!
Anonymous said:
hi i have a dead xda and i'm trying to fix it but it stops on 85% sometimes on 83%,i'm using the copy of cab file to sd card and runnig it from xda anyone can tel me how to get over this?
Click to expand...
Click to collapse
Hi,
seems to be the same case as I had: I found version, which did not freeze in 1%, but in 85% all stopped.
I unfortunatelly don't exactly remember complete list of my steps, but THIS MAY BE IMPORTANT:
After I made cold restart, I saw radio upgrade progress bar ( If you can't see this, try to follow instruction about repair.zip solution, mentioned hereinbefore ). Radio upgrade progress window only flashed for a second or two, then disappeared and WIN CE ( trying to boot up ) painted its splash screen. After that WinCE froze with this screen.
BUT:
If you have a luck, radio upgrade may continue on background. After 10-15 mins upgrade was done, and after restart ... I saw normal radio version in bootloader, and it worked well !!!
Note 1:
I killed phone with latest radio upgrade ( maybe lack of space, maybe radio switched on ), so there was no way to use lower versions ( it leads to "1% problem" with downgrade )
Note 2:
When my steps was still unsuccessfull, I continued [up|down]grade WIN CE and Bootloader. Maybe it was solution, maybe not, I dont know. I did it because I thought it would solve some problems with space for radio installation. My second reason was, that it should stop neverending ( 1% freezing) radio upgrade window after each boot.
Note 3:
During these installation steps it seems to me that battery si getting weaker, and does not recharge. So I tried to revive WIN CE first to be able to recharge.
Some steps may be unimportant, based on my feeling how it may work.
Anyway,
MY MDA RESURRECTION SUCCEDED,
so I hope it helps.
Regards, Lu
Hi everyone,
Thanks for all of the good work happening her in these forums. It’s really amazing how much information is here. I have the following situation and wonder if anyone can help me sort it out.
I have a running qtek with an un-working radio. I have the developers SE ROM 1.2 installed and it’s running but very slow. The system can’t detect the battery and its charge. The radio is off and will not turn on. I tried to install the O2 4.21 radio update using the SD card using the repair file downloaded from your site but no luck. It stops after it reboots and start the upgrade process with the dreadful 1% can’t flash error. From what I read so far the problem hover around the radio not being able to detect the battery power so it stops the flashing process. I tried changing the upgrade file and to do it many times but still always stops at 1%.
One way I didn’t try is copying the upgrade file to the windows root directory and tries to upgrade from there instead from the card. I don’t know where to find the 2 monitors files needed to be installed there before the upgrade. Anyone knows where to get them from?
Is there any other way to flash the radio using the SD card method (I am traveling and don’t have the cradle with me.)
Thanks again.
Have you tried fixing it with the following?
http://xda-developers.com/repair.zip
Hope it helps.
I have exactly the same problem as ahmedateeq. Runnung the repair.zip files as suggested by beeheij just results in Radio Stack Upgrade failure at 1% every time the XDA soft resets (the only way to break this loop is a hard reset). I have tried two different RSU upgrade versions, but to no avail.
What else can be done?
Geoff :?
gwhitea said:
I have exactly the same problem as ahmedateeq. Runnung the repair.zip files as suggested by beeheij just results in Radio Stack Upgrade failure at 1% every time the XDA soft resets (the only way to break this loop is a hard reset). I have tried two different RSU upgrade versions, but to no avail.
What else can be done?
Geoff :?
Click to expand...
Click to collapse
Did you try to turn on your GSM using the bootloader, by Holding power button then Soft reset the unit, then if you see the logo "Bootloader 5.15" press the calendar button, then you will see the GSM menu, try to select GSM ON then press the action button( the middle of navigation key), when it go back to the menu then soft reset again, then check if it is working or not..Please telme the version of your unit RSU and RUU... thank i hope this will help you.
:?
Did what you said - I was able to turn on GSM in Bootloader (though there was no message to confirm) - but this hasn't improved the situation. I still get the upgrade failure at 1%.
My RUU is SER1.2 (based on O2 3.17.03. RSU is (WAS!) O2 4.21
Any more ideas? Is it worth trying to copy the upgrade files to the Windows folder on teh XDA and running it from there?
Thanks for your help.
Geoff
I tried switching the radio on as suggested, but it failes.
Can we try the windows root directory install method. I need to know where to get the 2 monitors files to be installed with the rsupgrade file. Any one know where to get them.
Any other suggestions (Gurus help needed here)
RUU is SER1.2, O2 3.17.03, RSU O2 4.21
ahmedateeq said:
I tried switching the radio on as suggested, but it failes.
Can we try the windows root directory install method. I need to know where to get the 2 monitors files to be installed with the rsupgrade file. Any one know where to get them.
Click to expand...
Click to collapse
Ok here you go!
http://www.o2.co.uk/personal/xda/docs/Radio_Stack_Upgrade_v421.zip
Thanks Qman,
I have this file already and its installed, but I dont see the 2 monitor files in the programme b directory. Are they included in the rsupgrade cap file and if yes which one is which?
Thanks again and still waiting for some creative thinking how to solve this delmma that hit so many members.
ahmedateeq said:
Thanks Qman,
I have this file already and its installed, but I dont see the 2 monitor files in the programme b directory. Are they included in the rsupgrade cap file and if yes which one is which?
Thanks again and still waiting for some creative thinking how to solve this delmma that hit so many members.
Click to expand...
Click to collapse
Yeap they're included in the RSUpgrade.sa.CAB!
What I would do is copy the RSUpgrade.sa.CAB to my device and run it from there and if the upgrade fails do a search for the needed files and relocate them manually.
HTH
Ok people ...
since this one is spreading let's pull up a list of what you can or you cannot get with this one.
Version 4.20.0 (Build 13252)
RSU 6.24.01
The SIM software has a "Built Oct 14 2003" ...
AND YES !!! The Messenger is updated and it's working.
That's the first impresion.
So first step in the kitchen :
remember the params for the 4.00.21 ?
old stuff
wincever=4
start1=81740000
size1=00040000
start2=81c00000
size2=00300000
startbmp=81ec0000
startop=81c00000
that was over 3.4M of free space
NOW @ 4.01.00:
wincever=4
start1=81740000
size1=00040000
start2=81c00000
size2=00300000
startbmp=81ec0000
startop=81c00000
that is IDENTICAL
so ... again some space to fit our little "must have" apps.
Ya, but where do you get it
access info
thanks to ddevilx2 you can go to:
130.39.48.102 port 21
login tmobile password rom
Are there any kitchen's online where we can cook this up?
thanks in advance
obviously not "YET" ... since the only available is Yorch's ... and he's getting married ... you should probably start unsing your linux box or cygwin and set up your own.
it's fun :wink:
BALL & CHAIN :roll:
I've tried to set one up a couple of times to no avail. If someone wants to help me set one up I will host it at my expense. Let me know. I have all the 4.00.x ROMS and would like to make them all available.
BTW, I extracted the nk.nbf file from the exe so you don't have to change radio stacks.
Re: access info
decebal said:
thanks to ddevilx2 you can go to:
130.39.48.102 port 21
login tmobile password rom
Click to expand...
Click to collapse
very sweet! thanks decebal & ddevilx2
I tried that ftp site and it likes tmobil okay but not the password rom....any suggestions?
Worked for me 20 min ago
it is exactly as the post says: tmobil/rom
as opposed to t-mobile or T-Mobil/ROM or some such?
got it...its Tmobile/rom for those of you who have yet to try.
UGH. I think I just blew up my T-Mobile Pocket PC Phone. I downloaded the 4.01.00 per this thread and tried installing. During the radio stack upgrade it said "upgrade failed". The windows app came up with a message that said that I could recover from it by removing the usb cable and resetting the device. The upgrade should then recover. It never recovers though - I get as far as "Welcome to T-Mobile Test Only Not For Sale", with the version information showing as:
G
R
4.00.21
Never makes it past that. I tried the hard reset button as well with no luck.
I realize that this is the risk I take, but can anybody help???
Thanks!
Not sure what you can do.
BE WARNED PEOPLE that an .exe install is the RISKIEST way to update your device. Do an SD card method instead.
Can anyone tell me if this ROM (4.01.00) is for 900/1800 MHZ or 900/1900 MHZ devices?
TIA,
Max
All I saw on the FTP server is the exe file, is there a nbf file?
Just open the .exe with winrar or winzip, then you just extract the .nb file or more if you wish. Anyone have a listing of the differences with this ROM?
groggrog said:
- I get as far as "Welcome to T-Mobile Test Only Not For Sale", with the version information showing as:
G
R
4.00.21
Never makes it past that.
Click to expand...
Click to collapse
OK, IVE BEEN HERE
RESET DEVICE, PUT ON CHARGER [NOT CONECTED TO PC, JUST CHARGING], AND JUST LEAVE IT THERE... DONT DO ANYTHING, IT WILL LOAD, AFTER LIKE 30 MINZ OR SO :mrgreen:
WHEN OS LOADS, DELETE THE 4 RS UPGRADE FILES FROM WINDOWS DIR.
THEN IF U WANNA GIVE IT ANOTHER TRY, DECOMPRESS THE 4 FILES FROM THE *.EXE FILE AND MANUALLY PLACE EM BACK TO WINDOWS DIR. ... AND IF NO LUCK, GO WITH ATT STACK, LOW FAILURE RATE (as i am told) 8)
Ok I feel stupid, man that was easy.
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX