Hi I have a sony ericsson Bluetooth headset & have paired it to an i-mate JAMin with i-mate's latest WWE ROM and Tornado's hack of the the A2DP patch.
But the phone seems to be unable to use the headset for handsfree and wireless stereo at the same time as the phone doesn't want to switch back to wireless stereo once a phone call has ended. I have to go in to Bluetooth settings and mark the headset for wireless stereo again to switch back to music. I suspect this could be a problem with the "unofficial" support for A2DP on the Prophet and not the DS970.
I am wondering if any one can come up with a commandline for to do this as everytime (lots) the process involves multiple steps (kind of irritating), I would like to make a shortcut for this on my today screen or assigng it to a hardware button.
Attached are some Screen shots about the problem. (From Khuanchai's Post)
Give a try to BlueMusic from www.teksoftco.com
You should be able to do what you want from a simple today plugin.
Cheers,
Raul
Related
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
I've seen many posts about Bluetooth Stereo Headsets showing a Wireless Stereo profile when using A2DP implementation.
But I have a Jabra BT500 mono headset. Is it possible to make it be recognized as a stereo headset, when A2DP is applied?
I used the tweaks described on "A2DP support for 818pro" topic, but the extra option described (Wireless Stereo) doesn't show. I keep getting only the "Hands Free" option.
BTW, I'm using Qtek S200 updated with latest Dopod 818 Pro ROM (contains AKU2 and A2DP).
Enabling A2DP in your ROM will allow the device to connect to A2DP enabled devices in Wireless Stereo mode. When you make a bluetooth connection to a device the phone will query that device to find out what services it offers, then it will report back the ones that it understands and give you the option to connect to them. Since you BT500 is mono it would be pointless for it to have a wireless stereo service stored in its firmware, and why you would want to try connect to it in stereo mode is a bit confusing. If you're trying to use your headset as a mono ear plug for listening to music there is one thing you can do. Get voice command installed, edit the registry to get voice command running when you press the button on your headset (not sure if your S200 supports voice dial but if it does then you should be able to do this), then when you press the B500's button voice command will run and the bluetooth connection to the headset will stay active until you press the button again.
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
Hello @ all
I get a new Headset from Sony DR-BT20NX.
It works nice with the telephone, but now I also want to play my music.
I tried to install the cab from this thread: http://forum.xda-developers.com/showthread.php?t=263735
But only the Bluetooth headset has a new entry in the Bluetooth-device-folder.
"Wireless stereo"
But nothing happend.
I did softreset, and on/off and so on...
But I have the feeling, that something is missing.
And what is AKU2, and where can I get it for my XDA NEO with german O2-properties
Thank you very much,
Peter
Download VjVolubilis application, and install on the device. After turning BT on, press the AGOn icon and the audio output will be transferred to the BT headset.
NB. For me only works if Volubilis is installed on device not on storage card. My headset is Motorola H500.
Hi, thank you...
The tool is great,
but no way to enable Audio-Gateway.
When I click on it, it takes a while and then the message appears:
- Bluetooth On
- AG Audio failed
Maybe, there is something missing on my device???
Nobody here with the same problem?
Thnx Peter
I really don't know why it is not working for you.
The only thing that comes to mind is either headset incompatibility, or the fact that I had added a2dp to my AKU2.0 Rom before installing VjVolubilis.
Maybe you can try to install a2dp if not already installed.
I don't think it is related to a2dp. I was using VjVolubilis for Skype calls without any problems long before I installed a2dp on my AKU2 rom... Maybe its a hardware problem?...
I have tested this. You just need to go into the bluetooth preferences for your device, enable 'headset' and disable 'wireless stereo'. The sound quality is terrible in comparison to the A2DP module. Don't expect music out of it.
Hello,
I have installed the bluetooth toggle app on this forum. This is great as a click of the shortcut on my today screen and it routes the audio sound to the headset - another click turns it off so via the speaker - this is what I would like . But when I press it I hear a slight noise on the heatset confirming that audio is being redirected to it. Unfortunatley there is no sound/music etc it continues to comes out of the speaker and not the headset.
I have read all the other threads and trying to make sense of it.
Is it true that with the Hermes, you have to change the bluetooth stack and just can run this bluetooth app to router the audio to the bluetooth headset?
Ideally dont want to install bluetooth stack as I read that it always routes the audio to the headset and cant be turned on/off like above app.
Any advice appreciated
Thanks
-----------------------------
Jasjam with WM6 official dopod 838 - loads of apps - very happy with it
qwsoftware said:
Hello,
I have installed the bluetooth toggle app on this forum. This is great as a click of the shortcut on my today screen and it routes the audio sound to the headset - another click turns it off so via the speaker - this is what I would like . But when I press it I hear a slight noise on the heatset confirming that audio is being redirected to it. Unfortunatley there is no sound/music etc it continues to comes out of the speaker and not the headset.
I have read all the other threads and trying to make sense of it.
Is it true that with the Hermes, you have to change the bluetooth stack and just can run this bluetooth app to router the audio to the bluetooth headset?
Ideally dont want to install bluetooth stack as I read that it always routes the audio to the headset and cant be turned on/off like above app.
Any advice appreciated
Thanks
-----------------------------
Jasjam with WM6 official dopod 838 - loads of apps - very happy with it
Click to expand...
Click to collapse
Same problem with me.