Related
I just make the special edition ROM trhought mkrom and I obtain the.nb1 file, but when I flash my xd and make the cold reset, it hangs on the welcome screen, it print the 3 lines in red in the right bottom and after that ..... Nothing....... sniff
Anyone could help me????
I used the .nbf file that comes with the program A of O2.
Thks
that means that the windows kernel, and gsm have initialized.
the system should then proceed to execute the stuff mentioned in registry key HKEY_LOCAL_MACHINE\init.
maybe something went wrong with default.fdf?
I use the default.fdf that comes with the mkrom.zip, I just extract it and copy the nk.nbf file and proceed, I didn´t modify anything.
thks
I try to make another ROM with diferent Default.fdf but it hangs too.
it could be the NK.nbf file???
can you tell me where is a link fot one NK.nbf valid?
I´m going crazy :shock: jeje
thanks
if you use a different source rom, you need to change your default.fdf to
the one from that rom.
thanks for your patience,
I extract the default.fdf from the NK.nbf with dumprom.exe.
and then I use the fdf2reg.pl to create the default.reg and I put this file in the cfg directory, and after that I execute mkrom (sh mkrom.sh NK.nbf)
is that correct???
thanks
I think that the nbf file that I´m using is not a correct verion.
I tried to make a nbf file form jeff´s page but it doesn´t work with the nbf selection.
Do you know where can I find a nbf file that works with mkrom???
Anyone know how I can extract .nbf files? I need to see what is in this nbf file. Refer to this thread if you are curious
http://forum.xda-developers.com/viewtopic.php?p=250201#250201
Use the tools made by Buzz on this page:
http://buzzdev.net/index.php?option=com_content&task=view&id=65&Itemid=1
To see the contents of the nbf (converted to nba using the above method) file, you need to use these tools:
http://wiki.xda-developers.com/index.php?pagename=WM5EditROM
Its rather simple and hardly takes about 5 minutes for the whole thing
Cheers!
Thanx for the fast response. I gave it a go and it dosent seam to work. I get the .nba from the .nbf then when trying to
"prepare_imgfs.exe nk.nba"
I get this
"Searching for IMGFS start... Not found!"
I think that the .nbf is password protected. If anyone more gifted than me can help out with this one I know we will find a way to change the splash screen on all the newer (2.17 an so forth) ROMS.
Thanx again; Lew
then how do you extract NBF file from 8125 instead of NBA file ? Is there a way to do this ?
I would like input on this as well. I think we are missing a password here or something.
universaldoc said:
Use the tools made by Buzz on this page:
http://buzzdev.net/index.php?option=com_content&task=view&id=65&Itemid=1
Click to expand...
Click to collapse
I don't believe this works with (newer?) wizard nbf's.
Is there anyone here that could crack this would be "encryption" on the .nbf in question? I tried encoding my splash backup from aWizard using the project file from the "decoded" nk.nbf from "ruu_forcedalias_splash_245_425.exe" and it was a no go. It said that my storage was the wrong size for this ROM update (or something to the effect of NO). So it looks as if this nk.nbf from "ruu_forcedalias_splash_245_425.exe" is the key to unlocking the ability to change splash screens to custom images.
Later; Lew
u can try the tools in the attachment to extract files from image file.
the typho2 can extract parts from a SD card image, and the typhoonnbftool_04 can extract parts from a NBF file. they work well while do with the 1.x ROM, but I've never experienced it in extracting a 2.x ROM.
any exciting info, pls let me know,
Ok, good news, thanx to BrightMoonHeart I have been able to extract the BMP from the NBF using "typhoonnbftool_04.exe". The bad news is so far I can't seem to add an image (bmp) to the nbf or remove the current image. So this was a great step forward, just need a little help to get r done. I tried "typho2.exe" but I couldn't get it to do anything except give me the same info "typhoonnbftool_04.exe", It says it can extract the ".NBF" to an ".SPL" and that may allow us to edit it but I was not able to get it to convert. Any ideas guys? Always appreciated
Thanx; Lew
Ok I'm even closer now. I am using "typhoonnbfdecode.pl" and I can extract the ".nb" from the ".nbf". I can create custom splash using "nb_image_converter_859_418_826.exe" and make a ".nb" but when trying to put it back to ".nbf" i get this error
Code:
read 00030000 for splash from 92000000-Splash.nb
no sm signature at 0 in Splash
If anyone can help me out with any of this I would really appreciate it. I keep getting held up with all these conversions. I think some out there must know how to do this already, and I'm close but I keep hitting road blocks.
my head hurts; Lew
Hi,
I have taken a backup of my current rom using the 'ITSUTILS' and now i have a file called rom .nb
now the only problem is that i dont know how to break this nb file into nk.nbf ms.nbf and radio.nbf.
please help me on the same if possible.
apart from that even if u can tell me how to take a backup of my existing win rom, extended rom and radio rom with all the tools i require and a step by step method, then it will be a great help.
Your help is appreciated.
Thank you
Aditya Kapadia.
hi all, i have a .nb0 file which extracted from a wm5 ppc phone ( cant remember the model), and i need some help here to view this nb0 and extract some cab file from there.
This .nb0 consist a lot useful softwares, for example, soundcover (background sound during conversation), answering machine, conversation recorder and it works flawlessly on wm5 ppc phone.
Any expert??? please help.
**ok, I found the phone model, its GIGA, this is the nb0 file, latest update from thier website http://www.higiga.com/HigigaFrontStage/event/download/update/V1.12.80.zip
Hi,
Congratulations on extracting an .nb0 file. There are many methods to do so, depending on the device. Out of curiosity, which method did you use? Assuming that you correctly extracted the .nbo file of the CE image, you can treat it the same as an .nb or .bin file. use "viewimgfs *.nb0". the * of course meaning the name of your nb0 file like MSFLSH50_2.nb0, or what ever. This will give you all the files and what not. You can then use the DSMtool by bepe. This will organize all the files into packages. Then you can use cabwiz or some other program to create a cab installer. Good posts to follow are mamiach, bepe, buzzlightyear, and others, if you didn't already know. The dsmtool is found in bepe's WM5 kitchen. the viewimgfs and other imgfs tools were created by mamiach.
Regards,
Jason
thanks for your reply, i will try to use the tools to see whether i can extract anything out of it...thanks again.
I think i have successfully dump the rom to a dump folder, but i cannot see anything but only some dll files, what else i need to do??? do i need to use some tools to convert all these dll files to view the rom content?? please advise, thanks.
I did some searching because i need a sense rom for the WM emulator to help me test a program i'm working on and i came up with nothing. So i figured it would be a good idea to try and cook one but i need some tips coz i've only ever cooked one rom before and it didn't really go well.
So thoughts and suggestions below please. I'm looking for kitchen suggestions etc.
Thanks guys.
try this: http://forum.xda-developers.com/showthread.php?t=774430 I find it easy to create a self customized rom.
poyensa said:
try this: http://forum.xda-developers.com/showthread.php?t=774430 I find it easy to create a self customized rom.
Click to expand...
Click to collapse
Cool, thanks, but i don't see how i'm gonna make this compatible with the emulator in the windows mobile SDK? have you got any more pointers on how to do that?
My kitchen is designed to allow you to build the rom the way you want it. It then outputs the rom as a .nbh file that allows you to flash to the phone. Your emulator sounds interesting.
You may be able to use the .nbh file and then read that into your emulator.
GhostXSeries said:
My kitchen is designed to allow you to build the rom the way you want it. It then outputs the rom as a .nbh file that allows you to flash to the phone. Your emulator sounds interesting.
You may be able to use the .nbh file and then read that into your emulator.
Click to expand...
Click to collapse
Nope, can't do that. i tried it with a copy of NRGZ28's energy rom. It has to be a .bin or .nb0 file.
Now i did some reading while i was writing this and it turns out a .nb0 file is the same as the old school .nb rom dump files i just need to figure out how to convert an nbh to a nb0 file
Thoughts?
*edit*
found a tool called nbhtool by dutty that should do it
*edit 2*
dutty's tool didn't do it but i did find this tool by Da_G. The problem is i still get invalid image errors from the sdk emulator. I have searched but not found any answers so i'm a little lost.
Any ideas, guys?
Hi,
Can you post here an nb0 that works on the emulator?
we can try to import on our kitchens and check if we can rebuild it with sense.
If we can make it works, we can save a lot of time of 'flashing' when testing changes.
ypsmav said:
Hi,
Can you post here an nb0 that works on the emulator?
we can try to import on our kitchens and check if we can rebuild it with sense.
If we can make it works, we can save a lot of time of 'flashing' when testing changes.
Click to expand...
Click to collapse
The files in the emulator are actually .bin files but i gather that internally they are the same format. They are also 96mb in size so it's gonna take a while to upload to hotfile. I'll post back when i have a link for you.
Thanks for all the effort btw. I really do appreciated it.
link as promise: http://hotfile.com/dl/129295626/a4324d3/PPC_USA_GSM_WVGA_VR.BIN.html
M3PH, OsBuilder makes rom either in nbh, or in nb0 format. It's a professional tool - not just a "kitchen to cook".
HTCRIE (htc rom image editor) can extract the OS.nb from a .NBH file..
can you just rename the .nb to .nb0 if they are the same?
Ok i've got osbuilder. Had a quick read of the manual. Now what? do i need the sys/xip for a build? i am a complete noob at this so lots of help would be appreciated.
I've just tried to open an emulator image from the windows mobile 6 sdk with HTCRIE and got an invalid file format error. This is starting to become extremely frustrating. Especially as i can find any information on the actual format of the emulator bin files.
Did any of you guys get any luck with the file i provided? Coz i'm really stuck!