:x
Hi Everybody!
Please could somebody help me get rid of the sms sent message?
I have installed PHM reg edit and done the following :
Navigate to HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox
Create a new key with the name Settings
Enter Settings
Add a new DWORD Value with the following values
Name: SMSNoSentMsg
DWORD Data: 1
Base: Dec
Perform a soft reset
It didn't work???
What did I do wrong?
Thanks for any replies in advance.
{>
did you restart you PPC about 5 mins after you did the change? If not try doing the change waiting about 5 mins then reset and i should work!!! most reg changes need to reset before there work!
When making registry changes simply turn off the device by holding down the power button. That will force the write.
taken from somewhere in this forum:
Use a registry editor and go to:
HKCU\control panel\notifications\default\options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
Taken from WM5_Tweaks_Other
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg = 1 (DWORD decimal) is the actual key you need ( you forgot the settings key)
Sorry Guys I told you I was thick!
I've tried again, waiting 5 mins and turned of my machine.
Turned it back on, but I still get the sent message?
Raymonds, In your post, there was no number for no message?
Please help this poor confused man
{>
PS, it's a good job I don't want to do anything special is it? LOL
the message you're referring to is the "notification bubble", which is displayed when you use 8,9,10 or 11. i set mine to 0 so that it's only the icon that is shown when i send a message (and it is displayed for about a second at the top of the screen, indicating a message has been sent). there will not be any vibration, or "message sent" notification bubble, or notification sound to "harrass" you. :wink:
try it out. btw, i didn't need to soft reset with this registry hack.
Cheers Raymans.
That worked a treat!
Now wat else dare I do?
LOL :wink:
Related
I did search but couldn't find anything relevant.
Is there some kind of reg hack that turns off the vibrate notification when sending a text message if the phone is set to vibrate mode? Makes is tricky to send a sneaky txt during a meeting as it is.
Cheers.
try downloading pocketzenphone its a great app for sorting out profiles to turn on/off stuff like vibrating, message alerts etc.....it hasnt the ability to turn off the 'sms sent' feature but it no longer vibrates on mine!?
Id suggest using the beta 3 release (no problems to report) as for some reason some alerts dont work correctly with the 6.0 release on the TyTN.
Its easier to switch between preset profiles using this too.
Nice thanks. I'll check it out.
got this from one of the threads here...
Use a registry editor and go to:
HKCU\control panel\notifications\default\options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
I am trying to disable sms sending notification and have tried following:-
Disable SMS Sent Notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMsg"=dword:00000001 ->0 to enable, 1 to disable.
When i go to HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox, after inbox there are just two options SendDriver and Svc, where is settings?
Help will be appreciated.
Reliance.
Id recommend just downloading HtweakC instead sir, makes life ALOT easier.
Also it can perform the other tweaks available on the Hermes.
i only need this sms specific tweak, not interested in others. so if u could help me for that?
You have to Add the Dword Value using your registry editor "SMSNoSentMsg" with a value of 1. And i think you'd find HTweakC useful as it has other benificial tweaks.
it seems like non have read and understood my question.
If you make the registry entry you specify in post #1 you will get what you want.
if you mean you want to remove the sound and notification bubble after you send an SMS, try this registry tweak:
HKCU\control panel\notifications\default\options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
need help!!!!!!!!!
okay so im kinda new with these things where do i go on my phone to make these changes can someone please give me step by step instructions it would really be appreciated! thanks
download Schaps advanced config, transfer to the Hermes, click on cab file. Find it in programs directory an start it. Go to messaging, turn off sms sent notification. press done, restart Hermes and viola', All fixed.
Check in your settings 1st though as you may already have a version cookrd in if you are using a cooked rom (PDACorner V25 has a good version that allos a few neat tricks).
If you decide to upgrade your rom then PLEASE, HARD SPL YOUR HERMES...
Use Hard SPL V7 found here - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
after that download what will i do?
How to install file file format is different I think it is different...
Possibly unzip/unrar the downloaded file.....
Hi all,
I tweaked my devices (Qtek 9000 & HTC 3300) with this registry setting:
http://forum.xda-developers.com/viewtopic.php?t=15663
Now I still want to receive those "Delivery Reports", but I would like to disable the standard SMS Sound or add another sound for them. Then I can easily know if I receive a SMS Message or Delivery Report.
Anyone knows how to tweak this or how to do this?
Thanks in advance!
Sam
here
this was posted somewhere in the forum...cannot rem...
i only have the message sent notification
*************************************
There are a couple of threads on disabling the "Message Sent" notification bubble, such as this thread. Here's something different. If you still want the message sent notification to appear but in a different way, you can also do so.
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
samvds said:
Hi all,
I tweaked my devices (Qtek 9000 & HTC 3300) with this registry setting:
http://forum.xda-developers.com/viewtopic.php?t=15663
Now I still want to receive those "Delivery Reports", but I would like to disable the standard SMS Sound or add another sound for them. Then I can easily know if I receive a SMS Message or Delivery Report.
Anyone knows how to tweak this or how to do this?
Thanks in advance!
Sam
Click to expand...
Click to collapse
I'm searching for the same thing.
Did you came up with any solution?
Cheers
Thank you!
xmonster said:
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
Click to expand...
Click to collapse
that's exactly what I was looking for, with value set to 2 I ony get a topbar icon and a vibration to confirm that my message has been sent.
Works on WM 6.5.
I know that Jasjam had Pimp My Black for his Hermes Black ROMs (which I used on my old Hermes) and was hoping to find similar fixes for the Polaris/Cruise.
The main annoyance is the SMS confirmation msg/alert. Anyone know how to remove it?
I've tried going into registry but changing the settings there along similar lines to the Hermes achieved nothing.
Dont know what exactly is Pimp My Black, byt U can try to use "black bars" they are somewhere here, search for it (it makes both bars-top&bottom black)
SMS confirmation alert - shaps advanced config, sktools, kaisertweak
le_paulo said:
I know that Jasjam had Pimp My Black for his Hermes Black ROMs (which I used on my old Hermes) and was hoping to find similar fixes for the Polaris/Cruise.
The main annoyance is the SMS confirmation msg/alert. Anyone know how to remove it?
I've tried going into registry but changing the settings there along similar lines to the Hermes achieved nothing.
Click to expand...
Click to collapse
If you try Schap's advanced configuration tool v.2.02.0.2.0 u have the option to disable SMS sent notification, and delivery notification.
Thanks Gents - Schap's Tool works a treat...
For everyone else:
http://forum.xda-developers.com/showpost.php?p=1817956&postcount=4
here try this!!!
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
xrrkrrkx said:
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
Click to expand...
Click to collapse
This is great
But is there any way to change the notification sound?
HKCU\Control Panel\Notifications\Default\Wave
Change the location of the notification sound from
\Windows\Alarm2.wav to \Windows\"alert tone of your choice" (w/o quote)
Let me know if this works.
xrrkrrkx said:
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
Click to expand...
Click to collapse
This didnt work for me...and my options was set on 13 :S?
Advanced config 2 ffs >_<. Though the send notification is gone, but not the revieve. I see the pop-up everytime when i get a msg
reg edit worked
Old thread I know, but the reg edit suggested by calvin_M worked flawlessly using CERegEditor.
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings.
Create the SMSNoMsgSent in there with the value 1
anyone know how to keep the phone asleep when receiving a text message?
On an old custom Rom, (cant remember which) I had a sound, vibrate ticked,display message unticked.
the phone would just make a sound and vibrate and stay asleep.
doesnt work anymore on the latest roms. im currently using 3liteVI
phsnake said:
Dont know what exactly is Pimp My Black, byt U can try to use "black bars" they are somewhere here, search for it (it makes both bars-top&bottom black)
SMS confirmation alert - shaps advanced config, sktools, kaisertweak
Click to expand...
Click to collapse
'Pimp My Black' was a splendid configuration tool created for the Hermes by the legendary jasjamming I believe....
Anyone having problem after sending SMS? The notification seems to be like a few seconds lag/freeze after I pressed dismiss.
Same here. I've stopped bothering pressing dismiss. I just wait for it to disappear. Seems like it's about the same time.
Same here. Seems to be a systematic issue.
HiHi,
I too faced the same problem. Found some registry hack to modify the notification.
SMS NOTIFICATION
Navigate to:
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 show icon
1 show icon and play notification sound
2 show icon and vibration
3 show icon and vibration and play notification sound
4 same as 0
5 same as 1
6 same as 3
7 same as 3
8 show icon and notification bubble
9 show icon and play notification sound and show notification bubble
10 show icon and notification bubble and vibration
11 show icon and play notification sound and show notification bubble and vibration
I changed the value to 3 and the bubble does not pop up. But the icon and the sound notifications still operate the same. It's a workaround until they fix this silly problem.
Regards
relazz
relazz said:
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Click to expand...
Click to collapse
Nice find, but when i checked my registry i found that the current value is set to 13
any one with the same value?
yes, check the sms thread i started to see how to really fix this simple issue
schienz said:
Anyone having problem after sending SMS? The notification seems to be like a few seconds lag/freeze after I pressed dismiss.
Click to expand...
Click to collapse
I had the same problem. However, I've since removed the notification with XperiaTweak
I have another problem, the icon for new message disapers... First it showed up as it should but then it just stoped (I got a new message but the big icon didn't show up) Then i got it to work again and now it disaperd again and won't come back.
I tried going to HKCU\Control Panel\Notifications\Default Options and changed the Data to 3, rebooted and it still don't work. Does anyone know how to fix this?
Edit:
I just uninstalled TweakXperia 2.0 and i got my icon back...
Edit 2:
So i just installd it again, first i redownloaded it from cliffords.nu.
The settings i changed was
Main
Disabel security warning @ installation - Unchecked
Panels
Activate "Default panel at startup" - Unchecked
And now it works...
why am i not be able to change the option string "value"?
can someone help?
how come im not able to change the value?