Please help.
My SIM Toolkit works ok but whenever I want to exit, it wont, it just keep on displaying, covering my Today screen and I can't get rid of it unless I do a softreset. And since it stays, when I try using it, it doesn't respond anymore. i think it's technically dead but it just wasn't able to clean-up the user interface as it exits. Although i can still work on my other programs, the thought of it hindering my Today screen is just irritating. I hope you could help me on this guys. It started when I upgraded to SE
hi guys!
anyone who has this same problem? is it caused by a 3rd-party program? or anyone who's using PPC SE (XdaJojo) who doesn't have this problem? So i would know that it's one of my 3rd party programs that is causing it
mine always did that
but then i never used it
a task manager would prob fix it
thank rudegar,
i tried hardresetting my xda, without the extrom. just plain PPC SE. and guess what? the SIM toolkit worked just fine. when i restore my backup, it's back to its freezing issue. my problem now is to find the 3rd party program that is causing it to hang-up. i hope it works by gradually removing my programs one by one. tsk tsk tsk, that's not gonna be easy
well mine did it with the ext rom which my qtek2020 was shipped with
too
Related
Hi all,
I am aware about all the other threads but yet could not get across some nonsense on my MDA Pro.
I went back to the t-Mobile ROM because of german support on many features but running ozVGA now successfully with two exceptions:
1. Each time I reset the device, I have to reinstall vjbigphone (0.91) and re-run the .exe to get my dialer back to full screen. VJ did a real got job, but I hope anyone coud tell me, what could be wrong?
2. Does anyone know, how to get rid of the stupid and ugly video-button in the t-mobile dialer? I replaced all BMPs with the one's from iMate, but yet video is the stupid grey. flat button.
Once this is solved, I will write down exactly how to get really the tiny machine running with the best tools for best results.
Greetings
ndee
ndee: why do you have to re-install the app?
After a soft reset, what happens when you choose the "load and fix" option from the tray?
I am hoping to spend some time on this app over the next few days. Many apps being fixed, one a at time...
V
Hi Vijay,
when I softreset, everything on the phone is back to the tiny layout. Even though I "load and fix".
Only workaraound I figured out is reinstall :-(
ndee
Strange - I know we spoke about this before, but then, after you re-install it works?
Have you tried not loading VJBigPhone, soft reset, load the phone (eg press green key, so you can see Tiny buttons) and then load VJBigPhone. Does that make any difference? Re-installing shouldn't make any difference, it doesn't load any settings etc from the registry etc...
v
I have some similiar problems. I'm using also the neweset german ROM on my MDA Pro and after a soft reset I don't have to reinstall the app, but I have to close it and restart it again to gain access to the phone application. Without close VJBigPhone nothing happens, after starting the application again everything works fine (till the next soft reset, which happens every morning after the daily backup)
Wolfgang
I have an idea what might be the problem then.
The code was modified a while back to try to find the "phone" program without you having to specify the name in your own language (eg "telefon" instead of "phone"). However, it's possible that if the phone isn't found, it's getting confused. I'll try to look at the code again soon.
I'm not writing any new programs for a while while I do updates to all the old stuff
V
out of sudden, I dont need to reinstall anymore. Just after reset, I run vjbigphoneres and phone comes up full screen. Dont know what I did and how long it will last - keep you informed though - thx so far.
Any solution for the ugly video button of TM insight?
ndee
TM Button: I know you've spoken about it for a while, but I've got no experience of it, I don't really use my Universal I think someone (you?) posted one before, but could you send me a screenshot if you've got appropriate software, and if you have them, a zip of your extended rom?
V
Hi everybody !
I'm new and i have problem ....
I cannot uninstall nothing ot my Qtek 9100 ... When i try to uninstall message appears - ".... was not completely removed. Do you want to remove it from the list of installed programs?"
How can i repait uninstalling or is there a program that can uninstall software on my Qtek..
Thanks at advance !
Common problem...
This is a known problem on WM5. I haven't been able to uninstall anything from my wizard since I got it.
I just use spb backup to back it up each time and if I don't like the app then do a restore. Makes the application evaluation process pretty serial though.
wish i could be of more help...
Common problem...
This is a known problem on WM5. I haven't been able to uninstall anything from my wizard since I got it.
I just use spb backup to back it up each time and if I don't like the app then do a restore. Makes the application evaluation process pretty serial though.
wish i could be of more help...
Is there an another way to uninstall some applications?
Well, here's my approach.
#1. I do the Windows uninstall. When it asks, remove it from the list.
#2. I do a search using Total Commander or Resco File Explorer for files/folders that belong to the program and delete them. (This can be a little tricky, since they may use the company name, like Resco, or the program name, or some part of the program name, or an abbreviation of the program name.)
#3. If there are any additional problems, I search the Registry as in #2. This is mainly if there is something wierd like I get an error message related to the program, for example at startup. Or if I am trying to reinstall and it won't let me.
After this has happened quite a few times (say every month or so, you might want to do a hard reset and just reinstall the programs you want. That will clear out the mess.
Yeah I've been having problems uninstalling on my atom!!!
There should be a workaround to this.
HELP!
already a solutions to uninstall issue?
Is there already a workaround for this problem? Because I like to test out different software and uninstalling it is a lot of work this way
Thanks
Hi there,
I have a G4 Wizard, T-mobile AKU 3.3 Rom (German version), SIM and CID-Unlocked, O2 Genion Card, several extension.
What I realized, from time to that the today plugins disappear on my fresh hard-reseted wizard.
1st: a hard reset,
2nd: installed claunch or O2 Plus and activated the shortcut plugin,
....
worked with it, some time, then it is going to standby or I switched back to home screen
.....
3rd: after turning it on (or getting back to home screen) it sometimes loosing the shortcut bar. I never recognized it with other plugins.
Going to Settings/Today/Elements the plugin is still activated. Deselecting and selecting it again and pressing "ok" in the upper right corner activates it again?! This is confusing me.
I can't recreate the bug by any action. It happens randomly. But mostly after returning from stand-by.
It happens to fresh hard reseted states as well as when I installed some apps like Homezone,pocket breeze etc.
Is there any known problem like this?
Many thanks in advance.
That, unfortunately, happens a lot, especailly with cLaunch and I don't have the O2 plus plugin so I couldn't tell you if that one does it too. Here's a little app that you put in your windows startup folder that will get it to do it a lot less often hopefully. Ever since I installed it on my phone cLaunch only dissapears about once ever 10 times that I reboot my phone instead of almost every time.
Impressive, that seems to help me.
Thanks bro.
No problem, I know how much of a pain that is.
I have the same problem
xeno1 said:
That, unfortunately, happens a lot, especailly with cLaunch and I don't have the O2 plus plugin so I couldn't tell you if that one does it too. Here's a little app that you put in your windows startup folder that will get it to do it a lot less often hopefully. Ever since I installed it on my phone cLaunch only dissapears about once ever 10 times that I reboot my phone instead of almost every time.
Click to expand...
Click to collapse
Hi,
I have the same problem as the person you helped with your answer above
I cant download the app you suggested and wondered if you would send it to me?
email address is [email protected]
many thanks
Hi all,
I'm running the swiss version of the Trinity, it's called v1510 and I still run the original WM5-Version on it.
Now I found out that nothing happend, when I try to open a pic or a video. All what happens is that the screen flashes shortly, and that's all. When I try to start the application pimg.exe (I think this is the correct program?) nothing happens.
I have no problems to open pictures with other apps like Xnview or SPB Imageer, but not with the build-in pimg.exe. It wont be such a problem for me, but the point is that I cannot add images to my phone-contacts, as nothing happens when I click on "add image". I suppose it trys to open pimg.exe, which is not working properly.
Therefore I'm searching of one of those solutions: how can I force the trinity to set Xnview or SPB imageer as the default viewer? So, that it starts one of those programs when I wanted to add an image to my contacts?
Or: what can I do to "repair" the original pimg.exe?
Thanks in advance & best regards
JoeSac
if you backup the data you wanna keep
then you can try out a hardreset to delete regs and such
if a reg got corrupt for that program
have u installed anything lately. mine did the same thing and it was to do with a direct push mail client
Rudegar said:
if you backup the data you wanna keep
then you can try out a hardreset to delete regs and such
if a reg got corrupt for that program
Click to expand...
Click to collapse
Hi,
does this work with SPB-Backup? This is the only backup-software I have. In this case I suggest I should not backup System-Data, as they could be corrupt, am I right? Well, maybe I will try a hard reset...
@hoyler30589: Well, I installed a few programs, but I absolutely dont remember from what time on the pimg.exe did not work... However, I did not install stuff regarding direct push clients.
Best regards
JoeSac
Hi all,
after performing a hard reset I re-installed all my former softs, and therefore I was aware of a software called "Helmi's WMedia Support". And yes: this was the reason for my issue: after installing it, the viewer didn't start, and after uninstalling it the viewer worked properly again. A very nice "media support"... Well, maybe it was designed for WM6, can't remember anymore...
Okay, I'm happy that I can now add the pics to my contacts!
Regards
JoeSac
Hey Joe...
I suffer from the same problem you had, and although I'm sure I never installed anything called "Helmi's WMedia Support", it might be worth a try installing and uninstalling it. Therefore I tried to google the tool, but didn't find more than one website from Taiwan which didn't allow me to download it.
Could you send it to me, if the program is free of charge/public domain?
i'm portugueso so sorry my english,lol
I hope that anyone can help me.
Recently swapped pda, had a p4350 that was give me problems of network so i replace them by a trinity.
What's happen to my trinity is a strange situation, really strange.
the pocket not notifys me when I have receive a new sms,nor sound nor visually new message is received or not.
this situantion ocure when i have the magic botton load.
i use that program to close the programs that are in the memory.
when i close the magicbotton the sms services works well,but i have all the programs in the memory,i don't want that.
i have format, installed new rom,scrue all settings and nothing happens,keeps the problem
Nobody with this problem?
that can help me .....
mr_mufy said:
i'm portugueso so sorry my english,lol
I hope that anyone can help me.
Recently swapped pda, had a p4350 that was give me problems of network so i replace them by a trinity.
What's happen to my trinity is a strange situation, really strange.
the pocket not notifys me when I have receive a new sms,nor sound nor visually new message is received or not.
this situantion ocure when i have the magic botton load.
i use that program to close the programs that are in the memory.
when i close the magicbotton the sms services works well,but i have all the programs in the memory,i don't want that.
i have format, installed new rom,scrue all settings and nothing happens,keeps the problem
Nobody with this problem?
that can help me .....
Click to expand...
Click to collapse
Try to replace the magicbutton software with HTC X-button - it can be configured to shut down programs completely by hitting the "x".....
Regards,
theknf