Related
Hi All
I hope someone can help with the following problem.
I had wanted to use Mkrom on 2003 roms but after encountering problems with rom addresses and on KP2L's advice I switched to the "Rom Kitchen" as the code has been updated to handle 2002 and 2003.
I did not want to run the whole thing as I don't know much about Web servers on Unix so I just downloaded the 2003 directory and added back the missing folders and tools. After converting the files I am able to run ./mkrom.sh and make a "raw" .nb1 image that loads O.K to my XDA
The problem starts when I try to add files.
Trying a simple example of just placing ssnap.exe in the files folder and not bothering with links/ subfolders etc ./mkrom seems to work in as much that it picks up the files>transfers them to files 1/ 2 adds the files from cfg and > to the XDA1/2 .bin together with xip and loads to the rom under XDA_Developers 1/2. When this Rom is installed the XDA freezes at the bootsplash screen (Not completely, if you press the volume button it comes up to the start screen but the screen is miles out of calibration and most of the menus are missing) To test this further I downloaded a rom from Jeffs kitchen and stripped the files for the cfg/files folder and re-ran ./mkrom.sh but I get the same problem .
I have run lots of UltraEdit "Compare" reports,of all of the cfg/dumprom output files, between mine and Jeffs, and apart from some addressing differences all the data is getting to the rom. (I can post the reports if anyone wants them)
I suspect, although I'm useualy wrong, it's data "type"/ conversion conflict and wonder if under a full Rom Kitchen the files are converted in some way before being placed in the files folder prior to ./mkrom processing ?
As a last resort, I guess, I will have to set up the Web server (I have got one just never used it) and do the whole thing but hope to avoid it with a bit of help.
PLEASE :?: :?: :?:
Thanks
Richard
O.K I guess the question was too long/boring lets try this:
Do the scripts in Rom Kitchen make any changes to the files to be added to rom prior to processing by ./mkrom.sh
Richard
Richjn said:
Do the scripts in Rom Kitchen make any changes to the files to be added to rom prior to processing by ./mkrom.sh
Click to expand...
Click to collapse
No: the script basically just sticks the files into /files and then runs mkrom.sh
Not sure why your scenario isn't working, it sounds like it should...
the way to OS Localize your Universal
*****the files and tools you need*******
*imgfs_tool by mamaich
*boot_hv_tool by mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171&start=0
*HTC-64 Encodetool by bal666
http://forum.xda-developers.com/viewtopic.php?p=191164#191164
*hex editor (i used Heiw32 accroding to suggestion of Mamaich)
*NotePad in Windows
*Other high performanced Editor(if you have)
*Resource Hacker or PE Editor + Resource Tunner to edit mui
*Signcode.exe and sign with certificate
-----sorry can not write all in here,,, pls go to link---
http://www.asukal.jp/WM5_MUI/the way to OS Localize your Universal.mht
***********additional information 2006-May-15**********
regarding to initflashfiiles.dat and initboji.dat
i tired to write initflashfiles.dat in Japanese chalachtor, but not in CODE,
seems to work.
*write initflashfiles.dat in Japanese to specify Japanese Localized shell folders and Japanese re-named Short cuts. then add into rom.
also deleate both of 2 old dat files from rom.
then flash it back to my Uni, the localized shell folders were created!
this can save a lot of time to create the Localized ROM :shock:
But,,, still testing that ROM can work correctry.......or not.
<some appurication buttons can not assained if without initboji.dat>
*************2006-May 22 aditional********************
@ to edit the dll or exe from AKU2 rom, they have some difference.
Strings can be edited only with Platform Builder now.
pls reffer to this thread
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
Can I have your instructions?
Hi Asukal(sama):
I'm trying to localize my Universal to my local language.
I'm stuck now before boot set-up process after hard reset.
So, I would like to ask you several questions.
Could you show me your instructions / suggestions?
1) Certification Store (way 2-1)
You said I have to take out CertificationStore from registry file.
I could not find any key of "CertificationStore", so I compared my registry before and after SDK_Cert installation.
I found there are some differences in registry file, which are:
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\SPC\Certificates\XXXXX] –- 3 keys
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities\Certificates\XXXXX] – 3 keys
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Unprivileged Execution Trust Authorities\Certificates\XXXXX] – 2 keys
I removed "\" that locates on each line of hex data and write these keys on default.hv file.
However, the start-up process just after hard reset didn't start...
I also found some other differences on registry files, which seems certification file update time.
Do I have to put update time keys on default.hv file?
Or am I still missing something?
2) MUI (way 2-2)
I could sign *.mui files with SDK_Cert.
You said PE header must be corrected if I cannot sign *.mui.
In other words, you mean I don't have to correct PE headers because I can sign my *.mui?
As far as I checked my *.mui files, it seems OK.
3) iniboj.dat (way 3)
I could dump iniboj.dat and initflashfiles.dat and translated them to my language.
Of course I saved in Unicode (UTF-16) and removed the first 2 byte "ff fe".
When I run "delfile.exe", I noticed "delfile.exe" showed the error message that "delfile.exe" could not find iniboj.dat.
But I could add iniboj.dat with "addfile.exe".
Is this a normal message from "delfile.exe"? FYI, my base ROM is Qtek's AKU2; 1.30.77.
4) *.hv files (way 4)
I think the following is the keys that I must change.
[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"StartUp"="\\Windows\\StartUp"
"Recent"="\\Windows\\Recent"
"Programs"="\\Windows\\Programs"
"Favorites"="\\Windows\\Favorites"
"Desktop"="\\Windows\\Desktop"
Even I changed these keys, I cannot start my start-up process...
Are these keys enough to start start-up process?
I appreciate any suggestions / supports / instructions!!
Thank you.
hi! Camrade!
Re Qeuestions
1;certificate sotre. 3 entries are correct.
@But i am not sure what you removed???
i did not remove any thing and copy it to HV.
@yes update time must be in HV also.
like follows.
without this. no work as sertificate authentification.
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities]
"UpdateTime"=hex:\
00,e0,46,50,1c,96,c5,01
2;if your mui can be signed, they should be workable.
but i am afraid your mui of core-dll Strings Table were broken.
PLS reffer this thread about that!
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
if you are not sure, pls send me one of them to check it.
3:re-iniboj.dat, as you told me the eror message of delfile.exe will notice you, because i doesnt exisit in rom files. it was in XIP area.
But dont mind that. procceed it!
4;Shell folders; that is enough in hv, to just specify the loaction of Shell folder.<this also discribed in shellres.dll.
But no start up menu if there were localized Shell folders by failed initialized 2 dat files.
@the os can boot even the shellres.dll.xxxx.mui is not worked,
just missing Programs in StarMenu.
Now i am afraid your shellres____mui is read by OS, but it was incorrect.
@to change the Dr.Johnson screen to Japanes one, replace "stylus2.192.gif" and "stylus1.192.gif" with ones from JP os.
But the fisrt sentence before Stylus work for Dr.Johnson is from Shellres.mui, so your are failed in to read shellres_mui if it was still english.
Good luck!
Almost completed
Thank you, Asukal!
With your responses and instructions, I can finally boot my Universal with my language from boot screen!
I’ll make init*.dat file and try to make more localized ROM.
It seems a little difficult (complicated) to make initflashfiles.dat file translating to Unicode character code. But I’ll try!
Again, Thank you very much!!
shugoh
pls try to write iniflshfile.dat in Katakana, instead of Code,
i did try this some part of them just now.
Seems to be worked. But not sure .........didnt test all of in this dat,
just a part of it.
if the Katakana written dat was workable, it will be so easy to create
the Shell folders in Japanese................ :lol:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
chris_khho said:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
Click to expand...
Click to collapse
free hex editors can be downloaded.
many kinds of hex editors were in web.
Anyway, if i need something need test, i will call u! :lol:
Hi, Asukal:
This my be very stupid question...
I could translate html portion of shellres.dll with your instruction.
However, I still cannot do of tapres.sll and tshres.dll.......
Maybe this is because the type of resouce is different from shellres's.
So I tried to move html of tapres and tshres to another resources using PB because the other tools I have doesn't work...
When I wanted to save modified resource on PB, PB said I could not save the new resource because PB could not load resources from executable file...
I know this question is the basic one if I want to use PB.
But if you can show (a) hint(s) to me, I would appreciate your support very much.
Thank you!
shugoh
i guess PB can only save the files as "*****.exe" or "******.dll",
but not as a "******.dll.xxxxx.mui"
so you must save it as "anyname_you_want.dll" with out xxxx.mui to other folder.
then go to next step, because files edited with PB can not to be signed.
To enable to be signed, go following steps.
1;Open "any dll" or exe which havs correct PE header with Restorator.
2;Dlelete all of resources from this dll or exe.<make empty dll>
3:On another window of Resotrator ,
Open "anyname_you_want.dll" edited and save by PB
4rag and drop all resources exept "255" resource from
"anyname_you_want.dll" to "empty.dll"
5;save this empty.dll filled with resources of "anyname_you_want.dll",
as the name of your tagert xxxx.mui
6:Close all windows of resotrator.
7;try to sign on that mui, you may able to sign on that!
Good luck
Thank you for your instruction about PB and html.
however, I still cannot save modified file even though I put file name with *.exe or *.dll.
As my test, I opened x86 file and modified its file and I can save the modified. But still cannot tapres and tshres.......
I also tried some WM5 files, but not succeeded in saving it...orz
I installed all PB functions but for MIPS or SH4, which should not necessary for WM5.
The attaced is the error massage appreared when I wanted to save modifed WM file. (I installed Japanese PB, so error message is in Japanese)
"ta.dll" is only a temporary name for modified tapres.
I appresitate your any comments.
Thank you.
shugoh
I did it!!
Asukal:
I finally can make localized tapres and tsh with your recommended tools!!
Please see my blog at your convenience!
I'll try to localize folders with init*.dat files!!
Thank you very much!!
(If I have difficulties on making init*.dat files, I may ask you suggestions after I make every effort I can make,)
Thanks again
shugoh
Hi, Asukal
I can localize init*.dat file according to your post on May-15.
As you said, it seems OK that we can describe folder names on both *.dat file, not Unicode Code #.
So far I have no trouble with these *.dat files.
Thank you.
shugoh
Glad to here that!
You have done! you r a MAN!
Keep on going Dark Side!
Hello, Asukal
I'm back...
I have had a strange problem. As a matter of fact, I haven't solved this problem even though I could make Universal ROM in my language.
When I make my Universal hard & soft reset, I always see 2 white bold lines above and below "Windows Mobile" on 2nd splash screen.
I found these lines don't appear when I change mui regional setting. I mean no white lines on 2nd splash when I change:
1) shellres.dll.0411.mui to shellres.dll.0409.mui
2) shellresapps.dll.0411.mui to shellresapps.dll.0409.mui
(I'm trying to change English ROM to Japanese.)
0411 and 0409 have exactly same contents; I just change their name and place them on "windows" folder.
3) Change mui setting both of the following from 411 to 409.
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:00000411
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:411
With these changes, I can boot my Universal without white lines and Uni seems working well. (Of course, all letters except for the ones in these 2 mui are in English. But I suppose I can see Japanese if I change all 0411.mui to 0409.mui. (Haven't tested)
I also noticed I didn't change the region code in init*.dat. (i.e. LOC_0409_DIRWINDOWSHELP, not LOC_0411_DIRWINDOWSHELP)
So I changed init*.dat files and made new ROM with 0411.mui (incl. shellres & shellresapps).
However, there were still 2 white bold lines on 2nd splash...
I haven't added:
[HKEY_LOCAL_MACHINE\Security\ColdInit]
"Locale"=dword:00000411
"ColdInit2Done"=dword:00000001
"ColdInit1Done"=dword:00000001
Because my Uni has always stuck before the initial setup (screen alignment and Dr. Johnson etc.).
This time, I added these keys per your instruction, but I'm stuck again...
Do I have to add [HKEY_LOCAL_MACHINE\Security\ColdInit] ?
This would not directly relate to my experience, but I think I can find where I made mistakes.
I appreciate your response.
Thank you.
on my rom, i changed
LOC_0409_DIRWINDOWSHELP, to LOC_0411_DIRWINDOWSHELP
also i added folows
HKEY_LOCAL_MACHINE\Security\ColdInit]
but i dont think those are not reason of your problem,
did you tried to edit new one from versin nbf??
i guees the ROM was crashed,,, i never happend,
you think some reason of registry,,,
how about htis,,,
[HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI]
"FontArray"="500,600,900,1000,1200"
"CurFont"=dword:384
this is the for Screen resolution.
But in my case,,without this,, not happend problems like you,,,,
strange,,,,
Hi, Asukal:
I finally find the root cause of 2 bold lines on welcomehead screen!
the mui file taking charge of screen alignment on start-up set-up process causes this problem. I made the new one with PB and solved this problem!!
(I made the previous one with another tool...)
I'm very glad to inform you this and appreciate your supports very much!!!
P.S. However, I'm still stuck with Coldinit... But this is not an issue.
Hi guys,
First....a happy 2007 to you all.
Second....Is there a programmer here that could do me a little favor?
I am busy on a Rom for the Wizard and would like to have a certain theme (.tsk) file automatically loaded after the 1st boot.
This rom will be without an Extended Rom so I am trying to set the Rom in the user.hv file, but it fails to load it after the first boot, I cannot find the problem (or maybe it just doesnt work...) so I need a little tool to do this for me.
Can someone (in there spare time) create me an .exe file that does the following things:
- Load the theme for the Today Screen (example this command: cusTSK.exe \Windows\Windows_Black.tsk)
- Delete itself (the created .exe file) from \Windows\StartUp (from where it will be executed).
Unfortunately I dont have the skills to do this myself
Regards,
Molski
Hi molski.
I'll be glad to give it a shot over the weekend, but please note:
A running exe can not be deleted, by it self or any other means.
Perhaps you would consider putting a shortcut to the exe in startup and deleting that?
levenum said:
Hi molski.
I'll be glad to give it a shot over the weekend, but please note:
A running exe can not be deleted, by it self or any other means.
Perhaps you would consider putting a shortcut to the exe in startup and deleting that?
Click to expand...
Click to collapse
That would even be a better idea....thanks a lot!!
Regards,
Molski
Just an idea, don't know if this work on a ppc.
But in the Windows registry there is a folder called runOnce. Files you put there are run on windows startup. After they have run once, the entry gets deleted from the registry.
If the PPC has a similar registry folder, put "del custTSK.exe" in there, so the exe gets deleted at next reset.
No such thing on the PPC. There is only the HKLM\Init but that would be to early stage for tsk installation from my experience.
molski said:
Hi guys,
First....a happy 2007 to you all.
Second....Is there a programmer here that could do me a little favor?
I am busy on a Rom for the Wizard and would like to have a certain theme (.tsk) file automatically loaded after the 1st boot.
This rom will be without an Extended Rom so I am trying to set the Rom in the user.hv file, but it fails to load it after the first boot, I cannot find the problem (or maybe it just doesnt work...) so I need a little tool to do this for me.
Can someone (in there spare time) create me an .exe file that does the following things:
- Load the theme for the Today Screen (example this command: cusTSK.exe \Windows\Windows_Black.tsk)
- Delete itself (the created .exe file) from \Windows\StartUp (from where it will be executed).
Unfortunately I dont have the skills to do this myself
Regards,
Molski
Click to expand...
Click to collapse
Just a thought... The guys that made "superrom 1.1" has been able to integrate their today theme in the rom. Perhaps take a look at how that was done?
hi all, i'm trying to make a ROM backup of my device following this metod:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
I've extracted the .raw files, created the imgfs_raw_data.bin and dumped the ROM, but when i try buildimgfs.exe command i get the classic win32 error and the application crashes..
any suggestions?
tnx
I am having the same exact problem... i really dislike those semi dos promt tools.. its alway a question of running and praying...
userfriendlyness is also something the people here could be looking into....though im grateful for their working apps
Ill be looking into the thread.. http://forum.xda-developers.com/showthread.php?t=327073 for answers.. Ill keep you posted
Ok i checked the thread.
Seems a lot of people have the same error and not much is said about the error.
but this:http://forum.xda-developers.com/showpost.php?p=2277527&postcount=95
Seems the BuildImgfs.exe command just repacks the files in a similar .bin file.
So its only to be used when coocking i guess
The value of repacking is when you change files.
Hope this clears it up for you!
I also downed Hypercore, which is totally unusable.
At least i do NOT understand the first tutorial!
It says to put a rom file in a certain dir and then start dumprom... but no matter which file i put in the HyperCore\Extract\Source dir it says it cant find the right file (Ive tried 04_os.nb, imgfs_raw_data.bin, Part02.raw, RUU_signed.nbh and RUU_Pharos_DOPODASIA_WWE_1.11.707.1_4.1.13.59_03.15.90_BLUE_Ship.exe nothing, nada, zip, zilch, the big "O", niente)
so there is a big thank you for writing a tutorial which doesnt tutor. hey im not an engineer... just a user pppfffff... ever hear of ... userfriendlyness? usability?
ImgfsTools 2.1rc2 by tadzio
take a look here, in the attached file there is a readme with some explanations...
avathar behemoth said:
Ok i checked the thread.
Seems a lot of people have the same error and not much is said about the error.
but this:http://forum.xda-developers.com/showpost.php?p=2277527&postcount=95
Seems the BuildImgfs.exe command just repacks the files in a similar .bin file.
So its only to be used when coocking i guess
The value of repacking is when you change files.
Hope this clears it up for you!
Click to expand...
Click to collapse
That's correct! You just need to skip the two steps that create the Dump folder and then use the buildimgfs command. It worked for me after I was having the same problem with buildimgfs (for my Elfin).
BTW.. Sorry to bump this old thread.. Just thought it would help others out.
Folowing instructions ???
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
All ok, but someone need to make the stiky, with svreenshots and exact steps like you type this comp will do that
for example I was confused with FLASHDR, at my PHAROS that was "DSK1:" WITH ":" ????? Interesting, isnt it ?
P.S.
For admins :
Sory for bad english and tel me or let me make picture detailed manual for dumping roms. I am not bad with computer and mobile phones but this manual confused me at first
And another P.S.
I dumped my P3470 - Pharos english rom but i can not login on ftp, if someone need rom, PM me.
Device flashes - Device boots - Device runs the Welcome.exe, but then no Customisation.
Iv recently added some EXT packages into my rom. i made them myself from .cab's with cab2ext. ive tested the .cab's before adding to my rom, they do work. but some programs that did work before adding the new EXT's now dont because of no customisation eg, Task Manager - the one on the today screen and also Windows Live. (iv only noticed these two at the moment but there will be more, to be honest i cant be arsed looking for programs that work or dont work when its quite obvious its because of no Customisation, if i fix that, they will work again.. simples )
Anyway...
I opened the new EXT packages ive added and checked all the files.. eg, .dat .reg and all "FILES" files, i even checked the .lnk's and all seems ok. i then checked them again.. yet everything still looks ok, but something is seriously f*cked!
Also another problem, a wierd one..
When i Soft-Reset/Restart the device, it boots up with the Welcome.exe again? (the Welcome.exe is meant to only run the once and then dissable )
Help? iv almost got my rom the way i want it - ive been working on this rom for 2months and i dont want to start building the rom from scratch...
..again! pmsl
Does anyone have any idea what is wrong, if this has happened to you, how did you fix it?
Thanks!
Rn
Check your runcc.lua, then the conf*.txt files you include in your rom, then all the commands you execute inside them.
One of these commands go wrong in your first boot and so you are stuck on customization.
If you use xda_uc or another user customization method, check those scripts as well.
It may happen, for example, if you try to install a cab and for some reason it fails.
If in your recent packages you overwrite one of your conf*.txt file, this could be the cause.
Ciao
...
cheers dude, thanks for your time and help, i think i understand what you meen..
[1)config*.txt <-- all config files are ok.]
[2)runcc <-- googled and i dont use]
[3)xda_uc <-- googled and i dont use]
raving_nanza said:
iv almost got my rom the way i want it - ive been working on this rom for 2months and i dont want to start building the rom from scratch.....again! pmsl
Click to expand...
Click to collapse
its ok claros, f*ck it dude, its the second time this problem has happened to me, it happened on my first rom too.. (2months ago.lol)
i litteraly started again from scratch (a nice clean slate) ill just start my rom again like i did then which will solve my problem.lol ive got all my programs and setting backed up (*in a messy folder of messy folders )
my new kitchen will basicly be up and running again by the end of the day, its my birthday on wednesday so i may as well set it as the rom date.lol
Raving_1337_Rom_V3 (Alpha)
Cheers anyway dude, muchly appreciated!
Rn
[changed title to solved, @claros]
raving_nanza said:
its ok claros, f*ck it dude, its the second time this problem has happened to me, it happened on my first rom too.. (2months ago.lol)
Click to expand...
Click to collapse
This happened to me at least 20 times, or more
Let's check together what happen at first boot, if I'm wrong anybody else will correct me.
1) files are moved from \windows to other directory according to your app.dat / initflashfiles.dat.
2) .provxml files are parsed to change config values or filesystem
3) welcome is executed, but this command don't stop startup so:
3a) autorun.exe or runcc is executed too to customize rom: these package runs according to the commands inside various config*.txt files in oem packages or sometimes in ext packages
4) user configuration, usually included as a call inside one of conf*.txt files is executed. If you don't use xda_uc, user customization should follow the same syntax as autorun/runcc
5) Last conf*.txt file should include at least a
LOCK: Disabled and a reset
At this point you should have completed the welcome wizard. If not, and your calibration data is not in registry, your are prompted again with welcome wizard at second boot.
Common errors during boot sequence are:
- wince.nls is missing
- app.dat / initflashfiles.dat error, such as creating subfolders inside non existent folders or statements not in unicode format
- registry / provxml errors during setup of welcome.exe itself, for example you disable the whole welcome wizard but don't write calibration data into registry
- chain error inside conf*.txt files, such as config.txt calls config_operator.txt which call config.txt, generating a loop
- a cab or command inside a config*.txt files cannot be installed, for example for lack of space or a missing certificate
What I usually do in these cases is:
- check platformrebuild log file for errors
- save my last tmp/dump folder to check what is really inside the rom and what is really overwritten by what
- If you can connect by activesync to device before reboot, explore the device itself, it's processes and registry
- recompile the rom putting semaphores inside app.reg files, .provxml files, config*.txt file. I usually add an ext package to be included as the last one (ZZZ_Claros_Fix) where I put a special app.reg, a .provxml and a modified copy of config.txt, config_operator.txt, config_end.txt etc etc.. If you don't have a diamond, you can boot without sdcard to avoid any sd_config.txt error
Starting a new kitchen from scratch for me is at least 20 days of work, I'd spend a day more finding a solution
Ciao
claros said:
This happened to me at least 20 times, or more
Click to expand...
Click to collapse
A Mortscript called Autorun.exe
V2 working again, Cheers!
*i started setting up a new kitchen then thought f*ck that!
Rn
Are you saying that you were cooking in mortscript, and the autorun.exe file from the mortscript package over-wrote the one from your OEM package? I think that happened to me once a while ago. I just left out the one from mortscript; I've never needed it before, anyway.
...
yeah a mortscript called Autorun.exe over-wrote my OEM Autorun.exe
i deleted it the mortscript, everythings sound now