May sound like a strange request but i want to use an fm transmitter so i can listen to stuff through my car stereo but also want to be able to use my bluetooth car kit, question is if i plug in the headset and adaptor which i plan to make will this then be seen as a handsfree kit and stop the bluetooth kit working
Anyone know before i buy the bits
Thanks
Chris
Just tried it out, bluetooth car kit works for all telephone calls and all music and device sounds come through the headphones, when the phone rings the music mutes and the call comes through the car kit, very clever until you hang up the call, then the music does not come back through the head phones, you have to unplug them and plug them back in again, very strange
Chris
Related
Is there any bluetooh headset on the market that can support A2DP (or work as a speaker), but is look like a normal headset, I do not mind it's mono.
The closest to what I want is the itech R35, but i do not want to have to plug in the headphone, I just one those headset that hang on the ear.
CAn any one help please?
I would want/need an application w/c has a profile capability that will allow audios(call, microphone, mp3) to be redirected to both the wired earphone and at the same time spearphone or the phone itself, while the wired earphone is still plugged in. The audio needs to come out or the sound should come out on both the wired earphone and phone or speakerphone. I need this while driving and my wife needs to hear the message from the party being called or called upon. Or if I'm listening to a good music on my wired headset only, but later on would like to share it to everybody while driving again. I need to be able to toggle it easily. I've seen phoneweaver and phonealarm but these two does not fit the need describe above. If there is none existing, can somebody create this very simple app for my need? I'm willing to donate if ever. Btw, my unit is an O2 Xda Atom and I got this idea from the build in FM radio build in application that has this button w/c allows audio on both wired headset and phone. It does not work on calls and turning the radio always on drains the battery. And the wired headset acts as the antenna. Thanks in advance.
Hey guys
I know this will sound as a silly question, but is there a way for me to enjoy listening to my music through my bluetooth headset?
Thanks
What do u mean?! HD supports A2DP, so yes technically u should be able to...
how do I do that then ?
thanks for your help
Turn on bluetooth and pair it with your headset. Also, make sure you have beam activated
You have to have a Stereo Bluetooth Headset. Google it if you don't know what one is.
Search for "BT Audio". works on the HD.
use acbtoogglebt
use ACBtoogleBT
http://www.acbpocketsoft.com/Products/acbToggleBT/acbToggleBT-Free--3.html
works great even if u do not have stereo bluetooth. It sends all speaker sounds to headphone.
Be aware tough that this mode switches off once call is received and BT headset becomes normal so U have to toggle it again. If you are in the middle of watching movie you have to restart the movie programme to get the sound over headset.
But works great. I use it to watch TV serial and podcast while walking my DOG everynight
Blutooth Sterio Headphone
There are many Blutooth head sets which are large. If you want a regular sleek Blutooth handsfree you may try Plantronics Voyager 855. It is a small Blutooth handsfree with an ear stud which can be converted into a blutooth sterio head set by attaching a small chord with ear stud to the other ear. It works well. Steri quality is good.
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-855
Not sure if this is the correct place to post this
I have just upgraded from a kaiser to the HD2. I have a Bury take and talk car kit installed so have replace the Kaiser cradle with the Universal Bluetooth cradle. The phone pairs ok, the volume is low over the car speakers but this was the same for the kaiser and I have found that bury sell an amplifier to boost the volume. So far so good.
My question now is is there any way for routing music and gps instructions over the bluetooth connection. Registry hack, app or whatever. I cant see that it cant be done. I have read bits on other threads / forums about routing to Bluetooth headsets, and im thinking this is similar.
Anyone got any good ideas? I havent installed or messed with much yet so am willing to try stuff and hard reset if required
If the carkit doubles as a bluetooth headset and no more, it will only support the protocol which enables you to place calls with the carkit, and route the audio and mic for the call over bluetooth. If you want an audio connection, be sure your carkit allows for an A2DP connection - then you will get music and possibly also voice streams via bluetooth out of your car speakers.
Sorry if this has been asked before, but i had a look and couldn't find what i'm after.
Basically, my HD2 connects automatically to my car's bluetooth handsfree kit. My handsfree kit doesn't support A2DP so I still need to use the headphone socket to listen to music from the phone through the stereo. However, if the phone has paired with the car, the headphone socket doesn't work and the stereo thinks I'm getting a call when i try and play music.
Is there any way I can enable music through the headphone socket while the phone is paired to the handsfree kit?
Thanks!
anyone? it's really annoying!
This may not be the answer your looking for but have you tried cutting out the middle man i.e. the BT handsfree kit. Just use your phone and it'll patch a call thru the headphones and cancel the music.
Saves removing the headphones each time you get a call.
In BT manager, when you select your car device, what services do you have? If there's a stereo one, untick it.
Nope, just the headset profile. I've also tried turning on/off the option to send system sounds over bluetooth, but no joy. It just seems that as soon as it connects to the car, the headphone socket is disabled.....
OK, so I think the problem was either the tape adapter I was trying to use was playing up or during my messing about with settings I changed something.... either way it appears to be ok with headphones so should be fine with a line in