I did successfully upgrade to the UK version of the O2 ROM Ver. 2.21, but now there is a strange problem sometimes the phone just hangs after going on standby, I can see the greenlight blinking for the phone signal but it wont come back on when I press the power button. I have to remove the battery and then it restarts. Any solution to this problem or is it a bug? Thanks. :?
Found the culprit: Agile Messenger. Whereas in the earlier ROM it used to pop up an error message, not it would freeze the phone.
Related
I have problem with my XDA II which is just been upgraded to 1.66 Chinese ROM. The problem is the machine will freeze right when I turn it on. It only shows the last screen when it shuts down with the automatic shut down setting. No buttons will work at all. This happens about once per day. I was not able to softrest or hardreset. Only if I take out the battery and put it back again, the PDA will hardreset by itself. I had no such problem with the old 1.52 Chinese ROM version. Is anyone experincing the same problem as my? Does anyone know how to stop it from happenning again?
same problem system freezes
I have SX56 I have installed some wav file from net but after some when I hardreset it the system got freeze and now I am not able to start the PDA no buttons are operating please help if any one has got the same problem
Hi guys
I'm using an orange switzerland branded m5000, and I use buzz's unlocker yesterday to remove the SIM Lock on it. Appears top have worked fine, as I can use my wifes SIM card in it now(different provider).
However, I'm now trying to flash AKU 3.2 (Ivan's version) to my device. I let it connect to my PC with activesync, then start the RUU.exe. The screen that shows me the current versions, and what I'm upgrading to appears, and I click next. Then the small window with "gathering information from device" appears, and stays there. After about 30 seconds, my m5000 spontaneously reboots. Consequently, after another minute or two, I get a 101 connection error from the RUU.exe.
What am I doing wrong here?
Besides: My device currently (post-unlocking) claims to be running Radio V. 0.00.00, and the AKU3.2 upgarde screen claims it will only upgrade the CE Version, is this right? Am I now forever stuck of Radio V 0?
It worked now, please ignore
Ok, it worked. I dl'ed and flashed the 3.2 JasJar Rom first, and then Ivans beta14 worked. It's really quite a noticeable speed up. Thanks to everyone who spent their precious time developing these things.
Now all I have to do is get my providers MMS and GPRS and 3G settings back to normal.
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
I updated my rom to the 3.14 for the gps. after that I was stuck in the bootloader screen, downgraded rom to the one from htc website (2.17).
now phone works fine except when I press the power button to turn the display off you should be able to just press it again to turn it back on.Instead my green status light stays lit for like 2 seconds and then starts blinking like normal but the screen never turns on. Must remove battery and phone reboots fine just cant touch the power button same thing keeps happening. Any help or ideas on this?
Have you tried a hard reset?
yes it has me press r to confirm then after it says to reset press spacebar to boot, and still same problem.
i've even tried installing the 2.17 rom update a few times but nothing seems to help, I even thought about calling sprint to see if they could help. I'm currently running the latest rom from htc so i dont think they could say its my fault and them not fix it
irdeath said:
I updated my rom to the 3.14 for the gps. after that I was stuck in the bootloader screen, downgraded rom to the one from htc website (2.17).
now phone works fine except when I press the power button to turn the display off you should be able to just press it again to turn it back on.Instead my green status light stays lit for like 2 seconds and then starts blinking like normal but the screen never turns on. Must remove battery and phone reboots fine just cant touch the power button same thing keeps happening. Any help or ideas on this?
Click to expand...
Click to collapse
Having this exact problem with the 2.17 ROM. It's linked FROM Sprint's site so I'm sure it's an official release.
Let me know if you find out anything and I'll do the same.
I had the same problem. I tried to re-flash to an older hard-spl (I think it was olipro 1.10) and everything seemed to work again.
I'm having this same problem as well...
This is a symptom caused by running the level 1.x unlocker with the level 3.x ROM, or the level 2.x unlocker with the level 2.x ROM.
Flashing the proper bootloader (unlocker) should fix your problem. Level 1.x bootloader with level 2.x ROM and level 2.x bootloader with level 3.x ROM.
Hi all!
My Trinity does not always start up properly. I press the power button and the green light comes on but nothing else shows on the screen and it stops booting. This happens very ramdonly and mostly when it has been switched of for a while. It stops just before showing a screen with red lettering where you can read the ROM version & other stuff. Then I have to soft reset a few times and it will boot up ok.
Most of the time it starts up ok but this is really annoying, can you please help me!!!
Try a hard reset and install a stock/official ROM if the problem persists.
If it is still happenning with an official ROM, might as well send it for repair...
Thanks for your answer. I will try an official ROM and will see what happens.
Power Problem
When i am doing new rom.Somehow my boot gone.Now doesn`t work my power. Can anyone say me how i do that? or back my previous version...
I am using xda atom exec