Hi all!
While trying to download MMS while connected to Active Sync via USB, I get the question if i want to terminate the connection, and press "ok" but it doesnt disconnect. Seems like the Active Sync connection blocks the MMS download.
When i disconnect the USB cable i can download the MMS without problem.
Is it supposed to be like that?
Same **** too. It's OK I think
Related
Before I set up push email my phone synced to the exchange server fine via USB, but whenever I sync my phone to my pc via USB now it syncs to the exchange server via GPRS not USB and I get an error on both pc and phone saying it is unable to sync to the server, I have tried disabling push and GPRS but still my phone won't sync to the exchange server via USB, this is reall annoying I can sync via GPRS but not USB, I don't mind this but the error message on the pc and phone I get each time just bugs me, anyone else have this problem and know how to sort it out...?..
check to see if you have the ce tificate installed. For the push to work you need exchange sp2 installed and security feature pack installed on PDA
what certificate adn where do you get it from, the PUSH is workign fine have AKU2 and SP2 i'm talking about syncing via USB are you like blind?, re-read my first post..
browse?
Can your PPC browse Internet sites while connected to your PC via USB?
I was experiencing this very issue for the longest time and the thing that worked for me was changing the connection settings in Activesync on the computer. Here is what I did:
File => Connection Settings => This computer is connected to: The Internet
For some reason, when it was set to Automatic the USB sync would work for a while and then stop altogether. Good luck.
Hi everyone,
When I sync my 8125 phone's email (corporate exchange server) it syncs fine when not connected to the usb cable, meaning wirelessly over the air OTA through the Cingular GPRS network.
When I connect it to the usb cable, it tries to sync, then a window pops up on the phone saying "Cannot connect with current connection settings, tap here to change your settings"
I'm not sure anything has really changed. I then upgraded to active sync 4.5 but message still pops up on the phone & I get an active sync error saying it couldnt connect to the server.
it used to sync fine through my pc when plugged in, now all of a sudden i get this message.
Any ideas?
Thanks a ton!
You must have installed a personal firewall or something.
That happened to me as well ( or you upgraded Activesync beyond 4.0, that's when AS is regarding your USB connection to be an ethernet port with IP on it.
hi guys,
i have a big big problem - i cant sync normally my prophet. As I sync it via bluetooth oftenly it connects to the PC but there is no internet and browsing the phone options. The other and most bad problem is that the same is with the usb cable. even when I disconnect it it crashes the internet connection of the PC and I have to reset the network adapter everytime I disconect my phone. Oftenly I have to plug and unplug the cable to establish normal connection. I have the problem with different roms, using Vista 32x.. Please help .. I cant use my prohpet as it is supposed to
That's not really a problem its natural I have that same problem the PC is just trying to use your phone as a modem for internet access that's all. When connected to PC with your USB cable do you get internet access on your phone? if not you should configure manualy the phones network adapter when connected to active sync. It could work and we both got Vista 32 bit edition on Xp I don't get this disconnecting problem but if u wana sync only then uncheck the option in active sync Alow Data communications I think uncheck that option and your problem will go away ok but doing that ur PC won't share internet access with your Device ok hope you understand
Is there a way to stop automatic send/recieve of email when connecting the HD2 to the PC via sync center? I only ever want to check for emails manually when travelling. When I connect my HD2 to the PC via sync it always pops up a message to enter the username and password for the email account (I don't store my password in case my phone is lost). I have set it to only manually send/recieve email in the options but this only seems to be for it connecting over 3G and doesn't stop it connecting when connected to my PC. Is there a way to disable it? It's very annoying.
Cheers,
Richard.
Same problem here.
Did you find a solution meantime ?
Hello,
I searched the forum but found nothing...
is there a way that active sync downloads automatically new exchange stuff ONLY from a wireless connection (I disabled data) ?
no, not possible. Activesync only works with a direct cable connection, serial or TCP-IP, or bluetooth. The software is old and cranky and Microsoft has essentially not updated it in years and is stuck in a 2002 timewarp. They do not have anyone actively working on it, now Windows 7 connection manager may allow wi-fi, but I have not seen that to work either, as it is configured to work on with serial ports, USB or bluetooth serial. I have not seen wi-fi able to emulate a serial connection and that is what is required.
Maybe someday, but not soon, I am afraid.
More thoughts, if you mean getting email from your server, through activesync, yes that is possible, as you only need to open activesync connection settings and check the box to allow wireless connection while the device is connected. If this is what you mean, then yes you can.
Sorry, I think you misunderstood me, let me explain more clearly :
I'm speaking from my touch pro 2 mobile device, not from my PC
What I mean is when you have a working data 3G (or whatever) connection on your WM device, you activate push mail and tell active sync in the schedule options to retrieve emails, calendar, contacts whenever "item arrives".
Now, from what I know and from what I was been able to discover, this only works if, like I said, you have a working data connection.
Since I don't have any data connection, i would like to keep the same behavior but with my WM connected to a Wifi, in order that he retrieves stuff only when connected to a Wifi
ms0529 said:
More thoughts, if you mean getting email from your server, through activesync, yes that is possible, as you only need to open activesync connection settings and check the box to allow wireless connection while the device is connected. If this is what you mean, then yes you can.
Click to expand...
Click to collapse
I didn't find that setting (while im connected to a Wifi)
In active sync when I tip "Menu", I get :
Options -> there i can delete the sync profile or edit it
Schedule -> there i can say when to sync stuff
Status -> the status
Configure server -> same menu than "Options", but directly in the edit mode
Connections -> there it says :
When cradled
Synchronize all PCs using this connection:
'BlueToothActiveSync
'USB
Connect via Bluetooth -> bluetooth stuff
so please let me know what you mean with "allow wireless connections"
ho, btw i'm running wm 6.5 (energy rom)
Edit : I forgot to add that what's weird is that if i synchronize manually (also trough wifi) it works..so why isn't there some option to made it work automatically ?
I've seen that happen too - connect via cable with the wifi active and it will start synching, then disconnect the cable and viola - the tilt2 stays connected via wifi. but how to initiate the same connection without the cable, that's the great mystery.
auto connect with wifi?