Correct me if I'm wrong. From the readings I have made , WM5 works by not closing the programs launched and keeps on working in the background even after closing the program (tapping the x button on the right upper hand). The only way to close this program completely and to free the memory is by stopping the program using the running program window. It is then that you free the memory. Unlike 2003SE once you close the program it also frees the memory.
This makes it a problem for WM5, because I notice that if you open a lot of program, eventually you loose memory and cannot run other program , not until closing all those previously opened programs using therunning program window.
I was wondering if there are any program/registry hack/patch to go around this problem.
Thanks
There are many programs that turn the x into a permanent close, instead of just minimize. I use Wisbar Advance Desktop but that is a full Today Screen replacement program. If you press the x it minimizes, if you press x and hold, it closes.
There are tons of other programs... do some searching.
It shouldnt be a problem. Too many people think of WM5 as Windows XP. When your memory is low you need to close thigns. This is not the case.
As you quite rightly say when memory gets low WM5 should close the oldest app to free up the required memory, the reason it leaves things open is to keep things fast. When you need memory, it just closes something.
I use mine for TomTom as well as memory hungry push email and my memoy always has at least 10mb free and I have never run out. If the device is running slow its normally down to a particualr app using all the processor. Skype for example which can be closed with the exit command in its menu.
Unless your having particular problems I say let it be. Closing apps each time is a pain and a waste of time.
Actually, the problem is the same in WM 2003 and 2002.
The program you are looking for is called MagicButton and it's free.
http://www.trancreative.com/mb.aspx
thanks for your reply. I will try the magic button, will update you...
Magic button lets you to define what to close and what to keep alive. I'm set to keep alive mesaging and some other applcations to get ot on faster and to closу other.
Ok button = close app
I have tried various app but none gave me what I want: when I press the hardware button ok or for example the red button (end call) to close the active window without the use of the touchscreen. Does anybody knows an app whick behaves like this ?
spb pocketplus (not free) also has this capacity, and with it you can map the "close all" or "close" to a button. you may also define exceptions for this (applications that do not close even if you choose "close" or "close all").
Hi, See and try this.It has good capacities and work really fine in Prophet.http://insoftwarehouse.com/downloads/inclose/xe.php?l=en
Related
I am new to the whole PDA form so please forgive me if this is obvious but I have not found the answers on this site.
I have an O2 XDA mini s and am slowly getting the hang of it.
Problem: On closing all running programs in task manager I loose the use of the phone keypad, pressing the green call button brings up the phone application but minus the number keys, calls can still be made through contacts. A soft reset is required to recify.
?Related problem: In task manager, there are programs running that are not visible on the list (if I press below the last visible item something is selected and I can "goto" it.
Plus on occation the listed item takes me to a different program ie. selecting media player takes me to Word (no set pattern though).
All help would be appreciated.
Thanks in advance
StefanF: what task manager are you using?
V
Sorry, just to clarify, PDA is "as out of the box", so just the WM5 task manager.
Thanks for your interest, I have followed several of your posts and seen your site. You have some great programs I would like to use, particually like the big phone buttons and close application tool but am quite scared of this thing.
It may be a while before I mess to deeply.
Stefan: that sounds like an odd problem.
The built in task manager is useful but not very comprehensive.
If you want to view all running tasks etc, there are much better programs out there, many are freeware. If you can't find any better, check out one I've posted here:
http://forum.xda-developers.com/viewtopic.php?p=190257#190257
It's not written by me, I've just re-added some features.
Note - closing the phone (cprog.exe) is not a particularly good idea unless you really need it, because some other apps expect it to be loaded (eg contacts)
My programs
Some are ok. You might want to try my program VJOkButt if you just want to close apps to keep your memory healthy. But that's subject to taste and it's not clear how useful - although on the Wizard, it might be helpful.
The big phone buttons are actually just for the universal, it's not designed for Wizard. Basically it's for VGA phones that are using the ful VGA hack.
I've got some other stuff coming out soon. Stay tuned :wink:
V
Phone application
Thanks for the info.
I think, from what you have said, I need to know what I am doing to shut down the phone application as it is never my intention.
Pitty about the big button program. Why is there not full customisation of the screen (as in desktop PC's, can change the size of buttons, scroll bars... both of which are to small for finger use on this)
As a side note, when I am in an application the menus and any selections within make a click upon pressing ie. in word, Menu>Cut each selection makes a click. I have all tap sounds off but the only way I can stop it is to turn the master volume all the way down. Any ideas?
Once again, thanks.
You have to overwrite some of the default sounds with empy sounds to disable all click sounds. At least that's what I did, but that was a long time ago..basically you use your pc, make an empty .wav file, and overwrite the necessary files in your \windows\ folder. If you're interested in doing this and need more help, shout out!
Closing the phone - yes, you would probably not close it without knowing what you're doing. I presume when you're not using the task manager you're not having the phone problems?
Try a program called CETuner to help play around with your scrollbars etc. It's good for modifying colour themes and various settings on the go. Another program worth looking at is Tweak 2k .net.
V
Many thanks.
Personally i'm currently using Magic Button to close apps and act as a task manager. http://www.freewareppc.com/utilities/magicbutton.shtml
It allows you to close or minimise apps, and by clicking the "house" icon on the windows bar you can also close all, soft reset etc. Final point on it is that you can see X number of running apps and touch to swap to them, or "hide when inactive" and "keep alive" so you dont close (or even see) some apps - i keep messages & phone in this state to improve response times but close use close all to kill everything else.
Danger using Task Manager
Stefan,
I had the same problem. Ideally you should use Start/Settings/System/Memory/Running Programs to close down active tasks. Yes, the Task Manager does it and you can launch it from the menu, but it is a bit dangerous (as I found out). The Phone app appears in Task Manager as an unnamed icon and its icon looks like the Windows Media Player one (at least it does on my XDA Mini S). Shutting this down will do exactly what you describe (I started a thread called 'Help I'm stuck in Contact History on this).
By all means use Task Manager if you want to, just don't shut all apps, leave the unnamed 'media player lookalike' icon.
Cheers. :wink:
To the original poster:
I had this problem when i got my XDA at first. To be honest, i think its the o2 active stuff that messes up the phone app.
My suggestion is this: back up any important data, then do a hard rerset of your phone. When the screen comes up about Standard, Corporate or Basic install choose the Corporate option and use the passcode 0506. this will allow you to use the phone without any of the o2 crap and since i done it i've had no problems with the phone.
just to let you know, this will stop the phone setting up its own GRPS and MMS settings, but if you phone o2 ar go into a shop then they will happily send them to you.
Hope this helps.
Task Manager or Active ?
I suspect that it is shutting down the phone app that's causing the issue not Active. I agree, get rid of Active if you don't like it (I use Basic so I still get the MMS settings), but I don't think Active is the cause.
Just my humble opinion of course.
I'd completely overlooked that StefanF was using o2. I'm an O2 and Orange user, but O2 active has never touched my system. Sounds like that's quite an oversight by them if the O2 Task Manager allows you to close the phone app... not recommended!
V
Oooer indeed
My friend has an XDA Exec (Universal) and he had lots of problems with the phone app which I strongly suspect were much the same thing. (although his apps in task manager were not unnamed, he had multiple phone apps running). I didn't know the Task Manager was an O2 add-on, I assumed it was a WM5 feature.
I have been using ISH InClose Mobile for a month or so now. It seems to work ok, but a lot of the times it leaves apps open- calandar, messages, etc. Not all the time, just sometimes. So I end up having to do a close all and then all is good. Wondering if anyone has found a better "close" app, thats all I want, I know it is built into some other apps, but I just want something small, lightweight and integrated, I don't want a bloated program just to get the close features.
Try Magic Button
Use smclose - unzip and place in windows\startup folder. It always closes reliably.
SmartsKey has a "close" function built-in. If you're running that (and why aren't you?!) then you don't need anything else...
I have a problem with my new O2 XDA Mini S - it seems every time I check Settings > System > Memory > Running Programs, there's a lot of progs in there, bascially every one I've been using since the phone was turned on.
I always exit program just using the normal X in the top right (I wouldn't know any other way), yet every time I check Running Programs, they're all in there.
This is especially annoying while listening to a music clip in WMP - when I close WMP with the little X the song keeps playing.
Any ideas?
WM5's Windows Media Player has a settable option to prevent it from playing media in the background.
To close programs instead of "hiding" them, you can use a program like Magic Button.
The standard software that coms with the phone means that the 'x' does NOT actually close the program, it merely minimizes it to the background, meaning loads of running programs and a dead slow device. (the software manufacturers call it 'smart minimize'!)
Using programs like 'magic button', 'spb pocket+', or 'wisbar advance 2' (and many others I'm sure) will turn your 'x' into a button that really does close the application.
Hope this helps.
Matt
p.s let me know if it is helpful... it'll be the first time I've put something back into this site (and the first time I've been helpfull!!)
I have a TMobile MDA that has the newest Tmobile rom installed. I have tried GSPmagic and Magic Button and both suck. GSPmagic cant close the phone or active sync, and locks the system sometimes if you dont use close All which closes everything , what a buggy piece of crap. Magic Button seemed to hog my resources and it had problem closing things as well. Is this a commmon problem or does anyone here have a solid task manager and it would be a plus to put the device lock on the task bar too. I DONT ASK FOR MUCH JUST SIMPLE AND SOLID.
thanks
Charles :x
Try InClose
Much better
Thanks Mark, that is ALOT better. uses half the system memory as well. Now I just need to figure out how to get the phone lock in my launcher or on the task bar.
Task Manager
I haven't tried InClose, but I use Truetoolbar and SmartSkey.
After having used allmost all available taskmanagers, i just assigned "Running Programs" to a hardware button. One click and u can manage your tasks. No loss in memmory or performance.
:lol:
If you want to put the phonelock in the tray, you can use VJTrayLaunch with VJDeviceLock.
For a task closer, I use VJOkButt. But it purposely doesn't close the Phone or ActiveSync since they could be necessary files. To close those, use VJTaskKiller or VJPhoneToggle.
V
Phone can *not* be closed by *any* task manager. The phone all can only be closed by killing the cprog.exe process but that results a) instant soft reset b) freezed device c) flight mode turns on (depends of the device which happens, but one will surely do).
KTamas: I don't think closing cprog.exe will always have that effect.
I've done it quite safely on my Magician, except for one bug: trying to dial a contact from Contacts causes a crash.
On my Mio A701, closing cprog.exe will put the phone into flight mode.
V
mach2005 said:
After having used allmost all available taskmanagers, i just assigned "Running Programs" to a hardware button. One click and u can manage your tasks. No loss in memmory or performance.
:lol:
Click to expand...
Click to collapse
how do you do that? I can't figure it out.
ILauncher v3.0 has a task manager that will close the phone pad which frees up program memory. It also has a traylauch. Ilauncher uses less memory than pocket plus.
Anyways here is another free taskmanager, install to phone the execute. It will allow you to see the process riunning and allows you to kill any process you want.
Inclose
Just downloaded and using Inclose. Magic Button was fine unti I upgraded the ROM. Then it went berserk. Never closed the phone pad had to soft reset. Let us see how Inclose behaves.... until now it is.
I use SmartTask with the Cingular 8125 and it is absolutely perfect:
http://www.freewareppc.com/utilities/smarttask.shtml
(ok, a few exceptions, like you can't quit the Phone application or else the phone resets. but otherwise perfect.)
mach2005 said:
After having used allmost all available taskmanagers, i just assigned "Running Programs" to a hardware button. One click and u can manage your tasks. No loss in memmory or performance.
:lol:
Click to expand...
Click to collapse
Umm... How do I do this? Can't see that option in "Buttons" in settings.
Magic Button hogging memory?
Sorry, but you don't know what you're talking about...
Magic Button's exe only uses 4kb of memory! :shock:
If you wanna talk about a memory hog, we can talk about Voice Command porking up a whopping 4477kb of memory :shock:
As for a good task manager style app though (like the windows task manager), I suggest ITaskMgr:
http://www.iaccarino.de/silvio/ppcstuff.htm
Excellant task manager and it is free! It also minimizes to the phone's tray. Very cool app.
http://buzzdev.net/content/view/86/1/ I currently use that one and I'm liking it.
masr1979 said:
http://buzzdev.net/content/view/86/1/ I currently use that one and I'm liking it.
Click to expand...
Click to collapse
Yes, this Task Manager is great. Improved functionality on v1.5 - check the above link. And it appears to be very stable, I haven't had any issues with it at all.
herzzreh said:
mach2005 said:
After having used allmost all available taskmanagers, i just assigned "Running Programs" to a hardware button. One click and u can manage your tasks. No loss in memmory or performance.
:lol:
Click to expand...
Click to collapse
Umm... How do I do this? Can't see that option in "Buttons" in settings.
Click to expand...
Click to collapse
Sorry, I forgot to mention that you need a lttle program to make it work.
Just install the cab and you have got the option in the 'buttons"menu.
^that's wonderful, I've been looking for that all along, nothing fancy, does what i want perfectly I can't stand all those task manager progs, thank you.
markmcrobie said:
Try InClose
Click to expand...
Click to collapse
Thanks for your suggestion. I have this installed and it works sooooo much better than magic button.
It has a lot of useful features, like to rotate the screen. I can now rotate my screen to landscape when I'm using PIE without opening my keyboard. Also, if you want to minimize instead of close, you just press and hold the close icon and select minimize from the drop-down menu.
GldRush98 said:
Magic Button hogging memory?
Sorry, but you don't know what you're talking about...
Magic Button's exe only uses 4kb of memory! :shock:
Click to expand...
Click to collapse
It DOES cause some CPU usage. I'll publish some more exact CPU usage benchmarks; when I tested, it caused some 1-2% CPU usage, unlike most other (decent) task manager tools. This doesn't mean, however, that it'll always cause that much CPU usage. Will definitely publish a big roundup of all these apps, along with their CPU and memory usage.
I have seen lots of posts that explain how to close running programs,
and how to get memory back.
But I would like to know how I can let software run continuously
in the background.
I put the exe. of the program it in my start-up folder, and after a reset the program runs.
But sometimes during the day I close all other running software, to get
back memory. But when I do, I forget to startup the one that needs to
run in the background continuously.
Can someone please explain how to let it run continuously, without
accidentally closing it ?
tnx.
Is there really no-one here that knows how to do it ?
winny said:
Is there really no-one here that knows how to do it ?
Click to expand...
Click to collapse
It depends which soft you're using to close the whole set of running applications. Some of those applications managers have an option where you can put exceptions, so when you call the close all functionality, all the excluded apps won't be closed.
Cheers,
.Fred
or if u use vbar make ur program active and use the "close all axcept active" option...
How are you closing these apps?
As by default Windows Mobile keeps every app running in the backround (and is why you see so much talk about how to <i>really</i> close applications).
frazell said:
How are you closing these apps?
As by default Windows Mobile keeps every app running in the backround (and is why you see so much talk about how to <i>really</i> close applications).
Click to expand...
Click to collapse
Windows mobile just minimize them. In order to close them, you have to post a WM_CLOSE to the main window of an application. This should in most cases be enough to close an app.
Cheers,
.Fred
tnx guys for your help.
I use Wisbar, but I am not sure if there is an option in it to exclude
a program. I will look into it and see if it works.
I was also thinking about making a change in the registry to
keep the software moving.
As I am not a tech-guy, I do not know if this makes sense.
So forgive me, if this sounds stupid.
Having quite the same problem, just another exe - the CardAutoRun.exe, just another device, a Prophet; see my thread here:
http://forum.xda-developers.com/showthread.php?t=278672
I also have a TaskMangager, but there CardAutoRun is not visible at all - and I very seldomly use it to close *all* applications.
Yesterday I did a soft reset, after which the CardAutoRun worked for two tests with two different cards - then I simply switched off my Prophet (sent it to sleep), switched on again - and the next SDcard inserted didn't autostart (as it _did_ just before off/on).
Obviously CheckAutoRun gets kicked out by that automatic task managing of Windows ...?
I found out that Wisbar does a good job.
In Wisbar/Settings/Task Management you can clearly define which
programs need to keep running in the background continuously,
even if you close all at the same time.
It does not work
Now, I thought that Wisbar (or taskmanagers in general)
would do a good job. There still is a problem.
Yes, wisbar (or some other task manager) will keep software
running in the background at startup.
But as soon as I start Internet Explorer, the software that
should keep on running in de background is closed.
No matter how I configure the Taskmanager, as soon as I
start Explorer ALL programs are closed automatically.
Does someone know what is happening here ?