Database Users

Need cprog.exe file - please help

Hi,
is there anybody who could help me in getting cprog.exe file. I need to copy the file from \Windows to my computer, or exists some place where can I download the file?
Thanks,
Michal

extract the file from your ROM file...
Use dumprom, its good..

ezzkht said:
extract the file from your ROM file...
Use dumprom, its good..
Click to expand...
Click to collapse
Sure Thank you, but I have got the problem to find out the rom file and figer out where in the memory is placed cprog.exe. The problem is, how to write the command to read cprog.exe from the image. I have tried it 100 times and always getting the same error, that the image file cannot be found. I would like to see cprog.exe to try found out how signal strength is cooperate with cprog.exe. It's just for this reason, so if you have an idea what functions are called to refresh the signal stretgth I would be greatful.
Thanks a lot.
Michal.

Oh. I see what's the problem. I can't find the dumprom tool, just the dump tool. Where can I find dumprom.exe file, please ?
Thank you.

Michal said:
Oh. I see what's the problem. I can't find the dumprom tool, just the dump tool. Where can I find dumprom.exe file, please ?
Thank you.
Click to expand...
Click to collapse
Take a look at this site:
http://forum.xda-developers.com/viewtopic.php?t=4867
HTH
Stefan

Can we create the ultimate ROM???

We have the technology we can rebuilt it.
It occured to me that we should be able to build the ultimte "base" rom to use in the kitchen.
I would propose that it be based on the TMO 4.01.16 but make the installation of all the additional apps such as TMO toolbar, myemail, pdf and ppt viewers optional. I would also propose that sample windows media files and be removed.
Such a rom would give us the maximum space into which to add the appilications we chose but still allow us the flexibility to add some of the apps and settings that service providers supply. (much as the old Devlopers ROM did)
Just a thought
maudc
PS 3 cheers for Lumpistefan and Makis!!! :!: :!: :!:

That is a good idea. I think we can do it with mkrom.zip. We will need a linux op. but I think it will do the job under windows with cygwin.
I started to see the txt files, ini files etc, but I am at the beginning.
I want to make a good rom, like you. With no helps, no unneccesarry files, custom files (my ringtones for example) in the rom.
I only need time.

how
can you actually remove files from ROM ?
I couldn`t do it.
It will be great indeed.

Re: how
decebal said:
can you actually remove files from ROM ?
We want to build a ROM without some files. Not to remove files from a working ROM in the devices flash memory.
There is a file in the mkrom/cfg folder:
initobj.txt
It contains a filelist. I think there is a place to delete the files. But I have not tried. I have not time now.
Gabor
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Re: how
decebal said:
can you actually remove files from ROM ?
Click to expand...
Click to collapse
I think this is the big problem.....
Until now it´s not possible to remove Files from the rom....
What should be able is overwriting files from the ROm. But i think this doesn´t make much sense....
Stefan

Re: how
LumpiStefan said:
decebal said:
can you actually remove files from ROM ?
Click to expand...
Click to collapse
I think this is the big problem.....
Until now it´s not possible to remove Files from the rom....
What should be able is overwriting files from the ROm. But i think this doesn´t make much sense....
Stefan
Click to expand...
Click to collapse
So what do we do in that case?

Re: how
Sallala said:
There is a file in the mkrom/cfg folder:
initobj.txt
It contains a filelist. I think there is a place to delete the files. But I have not tried. I have not time now.
Click to expand...
Click to collapse
You're wrong.the initobj.txt file just conatins a list where to copy some files out of the rom. All Files are located in \Windows. The initobj.txt files contains the list, which file should be moved to wihich directory.
90% of this are the files in "Start Menu" and Help ....
So i see now chance to delete files out of the rom....
Stefan

Re: how
LumpiStefan said:
Sallala said:
There is a file in the mkrom/cfg folder:
initobj.txt
It contains a filelist. I think there is a place to delete the files. But I have not tried. I have not time now.
Click to expand...
Click to collapse
You're wrong.the initobj.txt file just conatins a list where to copy some files out of the rom. All Files are located in \Windows. The initobj.txt files contains the list, which file should be moved to wihich directory.
90% of this are the files in "Start Menu" and Help ....
So i see now chance to delete files out of the rom....
Stefan
Click to expand...
Click to collapse
Stefan I can get from you this file is like the Config.txt in the Extended_Rom in Himalaya. I can understand now how you could remove the Msn messenger shortcut into \WINDOWS\START MENU\PROGRAMS\INTERNET\CHAT & IM ????

CAB file, A nightmare !

Hello,
How do we run CAB file, i want to install a software which is in CAB files and when i click on it, i am getting this message " there is no application associated with (file name). Run the application first, then open this file from within the application"
Any Idea ?
Thanks[/b]

woolies said:
Hello,
How do we run CAB file, i want to install a software which is in CAB files and when i click on it, i am getting this message " there is no application associated with (file name). Run the application first, then open this file from within the application"
Any Idea ?
Thanks[/b]
Click to expand...
Click to collapse
A CAB-file can only run on your device...You have to copy/paste it into your device as is ( my documents or so ) find it using your file-explorer, tap it, and it will install... :wink: hope this helps...
BTW it is not a zip-file. though it looks as if it is on your PC, just FYI...

I have tried tihs and this message i am getting " there is no application associated with (file name). Run the application first, then open this file from within the application"
Help !!
Thanks

woolies said:
I have tried tihs and this message i am getting " there is no application associated with (file name). Run the application first, then open this file from within the application"
Help !!
Thanks
Click to expand...
Click to collapse
Is this on your device ?...hm if it is, you may have to nename the file, "...".cab

Tried this one as well, Same message, i am kinda down
Help me
Thanks

Tried this one as well, same message
Help me
Thanks

woolies said:
Tried this one as well, same message
Help me
Thanks
Click to expand...
Click to collapse
What OS are you running ?

Windows mobile 2003 second edition version 4.21.1088, i have MDA Compact

woolies said:
Windows mobile 2003 second edition version 4.21.1088, i have MDA Compact
Click to expand...
Click to collapse
may I ask which cab. it is, could maybe take a look at it

Ohh sure, that will solve my problem, have you seen other post regarding the today screen, its only that, the program we need to modify the today screen its in cab file, and as you said i did but same message coming up .
i am gonna paste the link here, and you can have a look please
http://forum.xda-developers.com/viewtopic.php?t=27331
000CAB3C.001
000CAB3D.002
000CAB3E.003
TOGGLE~1.000
These files i have downloaded, it says 000CAB3C so i think its CAB file,
You can have a look aat here as well
http://forum.xda-developers.com/viewtopic.php?t=26468
If you find something please let me know
Thanks m8

woolies said:
Ohh sure, that will solve my problem, have you seen other post regarding the today screen, its only that, the program we need to modify the today screen its in cab file, and as you said i did but same message coming up .
i am gonna paste the link here, and you can have a look please
http://forum.xda-developers.com/viewtopic.php?t=27331
000CAB3C.001
000CAB3D.002
000CAB3E.003
TOGGLE~1.000
These files i have downloaded, it says 000CAB3C so i think its CAB file,
You can have a look aat here as well
http://forum.xda-developers.com/viewtopic.php?t=26468
If you find something please let me know
Thanks m8
Click to expand...
Click to collapse
Ohh I know that one, that's Vijay's nice little thingy, well you want them all I assume, so be sure to empty your browser cache, then download this one... http://www.vijay555.com/vj/ToggleToday/VJToggleStuff.cab
Then sync with your device....copy and paste the file as is into your device, in "my documents", disconnect your device from sync, then use your file-explorer ( the default one ) to find the cab file, tap it, and it installs...have just checked it, it works just fine... :wink:

Hello
I am really sorry to say that i am getting same message "there is no application associated with (file name). Run the application first, then open this file from within the application" I think i have to istall a software which can help me to run these files ? because it says "NO APPLICATION ASSOCIATION WITH " and i see these files like open with icon in computer (see Attactment) now i dont really understand what should i do ,
Please
Thanks[/b]

woolies said:
Hello
I am really sorry to say that i am getting same message "there is no application associated with (file name). Run the application first, then open this file from within the application" I think i have to istall a software which can help me to run these files ? because it says "NO APPLICATION ASSOCIATION WITH " and i see these files like open with icon in computer (see Attactment) now i dont really understand what should i do ,
Please
Thanks[/b]
Click to expand...
Click to collapse
Are you absolutely sure that you copy this file as it is to your device ? and you have not made an attachment to cab. extentions on your desktop, so that it renames the file in transfer ? The only time you will need to click the file, is when it is in your mini, "my documents" folder, not before...!
If you are sure about the above, I mean sure..!!! Then maybe it's time for you to do something serious about your OS, 'cause then you have a problem..

...use cab installer and associate files with it!
...then try to disable the setting and see if system setting is restored

Its now fine, i was doing mistake ....Actually i was unzip the file first then i transfered the file, you mentioned AS IT IS helped me alot.
I really appriciate your help...and THANK YOU VERY MUCH !!!!!!!

With this small tools,you can specify the folder you want the CAB to be installed to.
Just copy it to you PPC,and run it.You can associate this tools with CAB file so that next time you click a cab on your PPC,the cabinst will take over the rest work in your will.

Thanks alot mate, its really helpful !

woolies said:
Its now fine, i was doing mistake ....Actually i was unzip the file first then i transfered the file, you mentioned AS IT IS helped me alot.
I really appriciate your help...and THANK YOU VERY MUCH !!!!!!!
Click to expand...
Click to collapse
I kinda figured that, but you kept insisting that you did'nt... :wink:
and you're most welcome..

Guys, if you're using ToggleToday, it works fine on WM2003 in Portrait at QVGA.
I'm currently working on the "proper" version which is WM5 and VGA and landscape friendly as well... stay tuned.
V

ROM upgrade headaches

Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Ive also tried the awizard tool but my jammin never seems to reset?
Any ideas would be great.
Thanks in advance

Ive managed to get the awizard tool to work and does reset the jammin but when i go then to install the dopod rom update in bootloader mode it comes up with ivalid provider id error ...... :? :? :? :?

Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.

27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
I try to update I-mate with the last Dopod ROM using this method and it doesn't work. I get invalid vender ID error.

OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811

27 said:
OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811
Click to expand...
Click to collapse
Oh, thank you... I was trying to use romupdateutility from I-mate pack. Now it works.

27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
Brilliant thanks alot thats where i was going wrong i wernt extracting both folders into the 1 ...Updating now
Thanks alot been pulling me hair out all day

You should expect the process to pause at 80% and 95%. Fear not, it will run its couse to 100%.
The new ROM is a lot faster. Try starting and stopping Blutooth. You'll notice the change in speed.

hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?

J273 said:
hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?
Click to expand...
Click to collapse
Hmm.
Are you using the ROM and Utility I told you to?

Im just downloading them agai nmate and ill post back.....ive just read the info that comes with it and error 302 is pretty serious i think and may need to send it to imate...hope not

so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie

J273 said:
so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie
Click to expand...
Click to collapse
Yes, you'll take them all and put in one folder.
You'll replace the utility from the ROM with the one in my link above.
It doesn't matter what the folder is called.

ok mate yea done that and its still doing the same hopefully ill figure it out

J273 said:
ok mate yea done that and its still doing the same hopefully ill figure it out
Click to expand...
Click to collapse
VNC?

Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?

J273 said:
Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?
Click to expand...
Click to collapse
Login to the forum and check your messages.

I have a JAMin with a DOPOD AKU2 image on it.
I want to put an imate ROM back on it.
I extracted the JAMin files into one folder, replaced ROMupdateutility.exe with the one in the link but it fails at 95% with this error:-
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.

yea im tryin to get back to imates rom and have exactly the same problem get to 95% then get the above error

[APP] ReCOOKstruct - "all pkg in one" cooked ROM reconstructor

Hi!
This tool tries reconstruct cooked ROMs, that have been cooked using the "all packages in one" feature. It does this using a scaffold ROM, that should be as identical to the cooked one as possible for maximum recookstruction.
How does it work?
In theory
It loads the filenames and registry entries from the mock-up ROM and from the dumped ROM (using rgucomp to get the registry informations), then it tries to set up the same file and registry structure that the scaffold ROM had, but with the files and registry entries from the dumped ROM.
In practice
Copy the "oem", "sys" and "packages" directory from a non-cooked ROM in a directory. This will be the scaffold. The more identical this is to the cooked ROM the better. You can of course use a kitchenized official ROM too.
Next extract the contents of the cooked ROM. (using imgfstodump or something similar). Put the contents of the ROM in a "dump" directory besides the "oem", "sys" and "packages" directory.
Delete the dsm file from the dump, you won't need it. If it has an rgu file, delete it too.
Next copy reCOOKstruct into this directory, and run it (you should do it in a console, so you can see what it is doing). After a while it should create an "_output" directory, with the "oem", "sys" and "packages" directories recookstructed. All files and registry entries it couldn't handle using the scaffold will be put in the "Unknown packages" package in the "packages" directory.
Recooking
If you want to cook the recookstructed dump, then move everything from the "packages" directory to the "OEM" directory (they won't have an option.xml so buildos won't recognize them is they are there). Add ".ROM" and ".VM" to the "sys" directory from the dump (because they weren't copied). Next load up buildos, and cook. Be careful though! You will need the same (extracted) XIP in your kitchen as the dumped ROM had! Copying and porting XIP's in not in the scope of this topic...
Legal
If you recookstruct a ROM and use information from it to create your ROM, then add credit to the original author even if he didn't release his rom in kitchen form
Download
see attachments
EDIT: forgot to include rgucomp.exe, added

Awesome concept if it works. Ill give it a shot later when I get by a real computer thanks

hey sztupy great tool bro im gonna take a look at it (sector)!

thanks
will try tis ... really getting tired of the all in one package ... when wanna recook
kudos

rjmjr69 said:
Awesome concept if it works. Ill give it a shot later when I get by a real computer thanks
Click to expand...
Click to collapse
I've tried with two of my favorite ROM's (that have no kitchens) and it worked fine. Just don't forget to use the XIP/os.nb/"etc stuff not related to the imgfs section" from the cooked rom.

ugotta try this. thanks

Hi,
i have tested your tool, but comes error:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\BlackStoneKitchen>recookstruct
ReCOOKstruct
Cooked ROM reconstructor
by SztupY (http://winmo.sztupy.hu)
Reading data from dump
Reading dumped filelist
Reading registry hives
dumping dump/boot.hv
C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\app\recookstruct.rb:85:in ``': No su
ch file or directory - rgucomp -o "dump/boot.hv" -nologo (Errno::ENOENT)
from C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\app\recookstruct.rb:85
from C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\app\recookstruct.rb:83:
in `each'
from C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\app\recookstruct.rb:83
from C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\bootstrap.rb:77:in `loa
d'
from C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\bootstrap.rb:77
C:\BlackStoneKitchen>
Click to expand...
Click to collapse
C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\ what is it???
solution?
Folderstructure:
BlackStoneKitchen
-Dump
-OEM
-SYS
cheers

*_Touch_HD_* said:
Hi,
i have tested your tool, but comes error:
C:\DOKUME~1\alle\eee\eee.recookstruct.exe.2\ what is it???
solution?
Folderstructure:
BlackStoneKitchen
-Dump
-OEM
-SYS
cheers
Click to expand...
Click to collapse
it couldn't find rgucomp.exe. Did you copy that there too?
EDIT: I forgot to include rgucomp.exe in the zip. Redownload please.

nice, now works.
cheers

yes yes sztupy...
always re-inventing the wheel. Gonna use this methinks....
Thanks as always bro. Hope you keeping well!!

Ok so if I read this right what needs to happen is you have to find the DONOR rom which is most likely a stock or leaked rom and then the actual rom your want to depackage and follow the rest of the directions?
Can someone please verify this for me before I screw something up. Thanks
Would someone be willing to do a rom for me I think this is above my skills but I have a base rom I'm dieing to add too

rjmjr69 said:
Ok so if I read this right what needs to happen is you have to find the DONOR rom which is most likely a stock or leaked rom and then the actual rom your want to depackage and follow the rest of the directions?
Can someone please verify this for me before I screw something up. Thanks
Would someone be willing to do a rom for me I think this is above my skills but I have a base rom I'm dieing to add too
Click to expand...
Click to collapse
Yes, you're right. You'll need a donor that will be used as a pattern for the recookstruction. You can use anything ranging from official ROM's to kitchens with extracted ROM's

sztupy said:
Yes, you're right. You'll need a donor that will be used as a pattern for the recookstruction. You can use anything ranging from official ROM's to kitchens with extracted ROM's
Click to expand...
Click to collapse
Thank you sir for such a speedy reply. I've given it a shot but I dont know what the heck is going wrong I think its Vista even though I have full admin "hidden admin" user rights.
I'm going to have to fire up the xp machine see what happens there. But I would still love if someone could do it for me hehehe

rjmjr69 said:
Thank you sir for such a speedy reply. I've given it a shot but I dont know what the heck is going wrong I think its Vista even though I have full admin "hidden admin" user rights.
I'm going to have to fire up the xp machine see what happens there. But I would still love if someone could do it for me hehehe
Click to expand...
Click to collapse
vista shoudln't be a problem, I'm using Win7/vista miyself

Another fine thread added to my list of subscriptions ...
Cheers!

hilaireg said:
Another fine thread added to my list of subscriptions ...
Cheers!
Click to expand...
Click to collapse
This thread wouldn't be possible without your cooking tutorial
SztupY

can i reconstruct a rom that was made by another chef? if so how because i read everything and i am still clueless on what to do

Wooooooowwwwwwwwwww! Works great!! PROPS man!!
Oh wait, then it failed in SYS at sys/Redist_Lang_0409
Says: (** are username, disregard please)
C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:215:in `conv': "\343o Tom\351 and Pr\355n"... (Iconv::IllegalSequence)
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:215
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:214:in `open'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:214
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:185:in `each'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:185
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\bootstrap.rb:77:in `load'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\bootstrap.rb:77
Any ideas??

Very much appreciated. I was in the process of developing the same exact thing. But you seem to have beat me to the punch. At least you made my job easier. lol

ookba said:
Wooooooowwwwwwwwwww! Works great!! PROPS man!!
Oh wait, then it failed in SYS at sys/Redist_Lang_0409
Says: (** are username, disregard please)
C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:215:in `conv': "\343o Tom\351 and Pr\355n"... (Iconv::IllegalSequence)
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:215
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:214:in `open'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:214
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:185:in `each'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\app\recookstruct.rb:185
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\bootstrap.rb:77:in `load'
from C:\DOCUME~1\**\eee\eee.recookstruct.exe.3\bootstrap.rb:77
Any ideas??
Click to expand...
Click to collapse
Iconv crashed because it expected an UTF-8 string but got something else. What locale are you in?