guys i've got the XDA atom and have been trying to sort out my gprs access for hours now and it's driving me insane!
I've got all of the settings from this board and various other boards but none of them seem to work. it seems to connect to the gprs but then says the page cannot be found.
Im on the O2 UK contract.
Can someone please give me the full working settings for O2 UK Contract from their XDA Atom please?
anyone? please
settings mobile web o2 uk
Please note the following: As these are the settings for the mini s, there is a bit of reading between the lines, its almost 100% accurate but from memory a couple of things are slightly different but easy to find, also be sure to enter these setting and the ones on the following post
When entering 'o2' please use the letter 'o'.
Please find the settings below for 'O2 XDA Mini S Mobile Web Settings':
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Select 'Add a new modem connection'
6. Select 'New'
7. Enter name for connection of 'o2 mobile web'
Select modem type, choose 'Cellular Line (GPRS)
8. Click on 'Next'
9. Enter Access Point Name of 'mobile.o2.co.uk'
10. Click on 'Next'
11. Type username of 'o2web'
12. Type password of 'password'
13. Select 'Advanced'
14. Select 'Servers'
15. Select 'Use server-assigned IP address'
16. Tap the Servers tab (bottom left hand corner)
17. Click on 'Use specific server address'
18. Click within the 'DNS' field, and enter '193.113.200.200'
19. Click within the 'Alt DNS' field, and enter '193.113.200.201'
20. Click 'OK' (Top right hand corner)
21. Click 'Finish'
22. Tap 'ok' twice
23. Tap the 'x' (top right hand corner) to return to the main menu
And heres the 2nd lot, again info is correct, maybe in slightly different area than described, this ALSO has to be entered in full for it too work
Please find the settings below for 'O2 XDA Mini S GPRS WAP Pay Monthly Settings':
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap 'Edit'. If no connections are present tap 'New'
7. In the 'Enter a name for the connection' field enter 'GPRS WAP'
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the 'Access Point Name' field enter 'wap.o2.co.uk'
11. Tap 'Next'
12. In the 'Username' field enter 'o2wap'
13. In the 'Password' field enter 'password'
14. Leave the Domain field blank
15. Tap 'Advanced'
16. In the 'TCP/IP' tab ensure 'Use server-assigned IP address' is selected
17. Tap the 'Servers' tab
18. Ensure the 'Use server-assigned address is selected
19. Tap 'OK' in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the 'WAP' option
26. In the 'Server' field enter '193.113.200.195'
27. In the 'Port' field enter '9201'
28. Tap 'OK' four times to exit
Related
i know someone has posted what they do before, but i cant find the thread
referring to my other topic, i just want to get MMS working.
thanks
AutoRun.exe
CAB-Customization-O2UK-Wizard-01-05-05Oct05XML.CAB
CAB-Shortcut-MMS1-JAVA5XX-VOICE-O2-31Oct05.CAB
Config.txt
PhoneLight_Skin_O2_WWE_1005.CAB
Rilgsm_STK.sa.CAB
Signed_DiscoButton_16.sa.CAB
Signed_O2UK_103040101_RingTone.sa.cab
Signed_O2UK_exception.sa.CAB
Signed_O2UK_Region_Customize.sa.CAB
signed_Prodigy_o2AUI4_build26.cab
Signed_Remove_BatteryIcon.sa.CAB
Signed_UA.sa.CAB
Signed_Version.sa.CAB
Signed_WIZ_O2UK_PIE_homepage.sa.CAB
SmartDialing_enable_0915_signed.CAB
STK_Service.sa.CAB
NOT a reply to the question - but still the info you want:
**********
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Under 'My Work Network' tap 'Manage existing connections', then tap edit. (If not present then tap 'Add a new modem connection)
6. The 'Select a Mode' drop down box should be set to 'Cellular Line (GPRS, 3G)
7. Tap 'Next'
8. Enter Access Point Name of 'wap.o2.co.uk'
9. Tap 'Next'
10. Type username of 'o2wap'
11. Type password of 'password'
12. Ignore 'Domain' this should be left blank
13. Tap 'Advanced'
14. On the 'TCP/IP' tab, only 'Use Server-assigned IP address' should be selected.
15. Tap the 'Servers' tab
16. Only 'Ise Server-assigned Address' should be selected.
17. Tap 'OK'
18. Tap 'Finish'
19. Tap 'Proxy Settings'
20. Tap 'Advanced'
21. Tap the 'WAP' field
22. In the Server field enter '193.113.200.195'
23. In the Port field enter '9201'
24. Tap 'OK' 4 times and exit
The GPRS WAP settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
*************************************
Below are the O2 XDA Mini S MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
*******************
Below are the O2 XDA Mini S Mobile Web Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Select 'Add a new modem connection'
6. Select 'New'
7. Enter name for connection of 'o2 mobile web'
Select modem type, choose 'Cellular Line (GPRS)
8. Click on 'Next'
9. Enter Access Point Name of 'mobile.o2.co.uk'
10. Click on 'Next'
11. Type username of 'o2web'
12. Type password of 'password'
13. Select 'Advanced'
14. Select 'Servers'
15. Click on 'Use specific server address'
16. Click within the 'DNS' field, and enter '193.113.200.200'
17. Click within the 'Alt DNS' field, and enter '193.113.200.201'
18. Click 'OK'
19. Click 'Finish'
The Mobile Web settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services
**********
Got these by phoning O2 and having the instructions e-mailed out to me
it seems there is actually "stuff" missing rather than just mms settings, ie apps.
hence if i could find which cab it is, it would help greatly.
although, thanks for ya post :mrgreen:
bttt
hi, and thatnks for looking i really need help!
ive only had this i-mate for a few days and its a cracking little bit of kit but im haveing trobble with setting up the gprs im on o2 contract ive rung o2 and thay dont even know what a i-mate is!! so could you please help? ive tried to down load the CAB files on this forum for stting the gprs but i cant run it on my i-mate and when i have treied all the o2 settings by putting them in my self, i just get 'modem was not forund at mobile.o2.co.uk its soooo anoying!
Thanks :evil:
Its ok now, ive sorted it, if you ring o2 and tell them you have a i-mate jam or a mda thay wont have any idear what your on but, if you tell them you have a XDA minis (there version of the i-mate) then there brain lights turn on, anyways these are the settings thay gave me and thay work 100% These are for o2 contract not pay as you go:
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Select 'Add a new modem connection'
6. Select 'New'
7. Enter name for connection of 'o2 mobile web'
Select modem type, choose 'Cellular Line (GPRS)
8. Click on 'Next'
9. Enter Access Point Name of 'mobile.o2..co.uk'
10. Click on 'Next'
11. Type username of 'o2web'
12. Type password of 'password'
13. Select 'Advanced'
14. Select 'Servers'
15. Select 'Use server-assigned IP address'
16. Tap the Servers tab (bottom left hand corner)
17. Click on 'Use specific server address'
18. Click within the 'DNS' field, and enter '193.113..200.200'
19. Click within the 'Alt DNS' field, and enter '193.113.200.201'
20. Click 'OK' (Top right hand corner)
21. Click 'Finish'
22. Tap 'ok' twice
23. Tap the 'x' (top right hand corner) to return to the main menu
Settings for mms:
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
Settings for GPRS Wap:
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
Someone might come accross these on there journey to find GPRS inlightenment.
I hope thay help
Airhead
Oh yeah and i forgot to add, you need to do a soft reset arfter you have added the new gprs, mms, wap, settings. :idea:
Hey could anyone please tell me how to send mms on the o2 xda mini s. I think iv got the settings correct but every time I try to send it just saves to the out box
Talk to your customer services people... its possible mms is not active for your number...
You might try talking to the tech support team if possible.... they might check the settings on your xda
Thanks bud. il give them a ring.
all the settings can be found on filesaveas.com
depends whether you are contract or payg. I think all new sims accounts are mms enabled. It took me a little while to get my payg sim to send mms in the mini s but found a walkthru on the expansys board in the end
http://www.expansys.com/forumthread.asp?code=129999&thread=27
the problem is you need to set up your gprs wap connection 1st then point the mms connection to use this wap connection to send/receive. I think thats the case anyway. If you have any probs let me know and i'll try to take you thru all my settings.
Im having the same problems.
I have phoned them 3 times asking what the problem was and they kept trying to tell me it was my settings, until one day they said they hadnt set itup on my account. They trhen said it would take 24hours .... that was 3 days ago !!!
Anyhoo, they sent me these emails wit hthe settings required for the CONTRACT settings :
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
Code:
Below are the O2 XDA Mini S MMS Pay Monthly Settings
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
Code:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
HTH
cool! thanks for the help!
right guys ive got the gprs working but now the mms wont work where the hell is it wrong......
GPRS WAP,MMS Setting
Below are the O2 XDA Exec GPRS WAP pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Under My Work Network tap 'Add a new modem connection'
6. The 'Select a Mode' set to Cellular Line (GPRS, 3G)
7. Tap 'next'
8. Enter Access Point Name of 'payandgo.o2.co.uk'
9. Tap 'next'
10. Type usename of 'payandgo'
11. Type password of 'password'
12. Ignore 'Domain' this should be left blank
13. Tap 'Advanced'
14. On the 'TCP/IP' tab, only 'use server-assigned IP address' should be selected.
15. Tap the 'Servers' tab
16. Only 'Use Server-assigned Address' should be selected
17. Tap 'OK'
18.Tap 'Finish'
19. Tap 'Proxy Settings'
20. Tap 'Advanced'
21. Tap the 'WAP' field
22. In the Server field enter '193.113.200.195'
23. In the Port field enter '9201'
24. Tap 'OK' 4 times and exit
Now MMS Pay as you go Settings
1. Selct 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'Options' Choose and Tap Account for Settings
5. Select 'Servers'
6. Select 'New'
7. Type in Servers name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'connect via' and select 'My Work Network'
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set AS Default'
Hope this helps you
Thanks so much! My MMS now works!
woooo hoooo
yesss thanks for that !! i put in these settings and mms is now working on my xda!!
unless i am doing it completely wrong the mms tabs are different in WM6.1 witch has trown me, so if you could update the mms section at around step5 or can offer any help thanks
I've moved provider to O2, though i'm using the T-Mobile Vario II handset, however I can't seem to get all the things working.
I've followed all their instructions for the settings and it doesn't seem to work. I'm also fed up of phoning their foreign call centre where they make me feel like I'm speaking swahili other than english. They don't seem to be able to cope with someone not using one of their own handsets.
These are the instructions I've followed. Can anyone think of other reasons why I can't get things working
Mobile Web Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'.
2. Select 'Settings'.
3. Select 'Connections' tab.
4. Select 'Connections'.
5. Select 'Add a new modem connection'.
6. Enter name for connection of 'o2 mobile web'.
7. Select modem type, choose 'Cellular Line (GPRS , 3G).
8. Select 'Next'.
9. Enter Access Point Name of 'mobile.o2.co.uk'.
10. Select 'Next'.
11. Type username of 'o2web'.
12. Type password of 'password'.
13. Select 'Advanced'.
14. Select 'TCP/IP' tab.
15. Select 'Use server-assigned IP address'
16. Select 'Servers' tab.
17. Tap on 'Use specific server address'.
18. Tap within the 'DNS' field, and enter '193.113.200.200'
19. Tap within the 'Alt DNS' field, and enter '193.113.200.201'
20. Tap 'OK' (Top right hand corner)
21. Tap 'Finish'
22. Tap 'ok' twice
23. Tap the 'x' (top right hand corner) to return to the main menu.
The Mobile Web settings are now complete.
GPRS WAP (Wireless Application Protocol) Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the 'Connections' tab
4. Tap the 'Connections' icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap 'Edit'. If no connections are present tap 'New'
7. In the 'Enter a name for the connection' field enter 'GPRS WAP'
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS, 3G)'
9. Tap 'Next'
10. In the 'Access Point Name' field enter 'wap.o2.co.uk'
11. Tap 'Next'
12. In the 'Username' field enter 'o2wap'
13. In the 'Password' field enter 'password'
14. Leave the Domain field blank
15. Tap 'Advanced'
16. In the 'TCP/IP' tab ensure 'Use server-assigned IP address' is selected
17. Tap the 'Servers' tab
18. Ensure the 'Use server-assigned address is selected
19. Tap 'OK' in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the 'WAP' option
26. In the 'Server' field enter '193.113.200.195'
27. In the 'Port' field enter '9201'
28. Tap 'OK' four times to exit
The GPRS WAP settings are now complete.
MMS Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap 'Start'
2. Tap 'Messaging'
3. Tap 'SMS \ MMS'
4. Tap 'Menu'
5. Tap 'MMS Options'
6. On the 'Preferences' Tab 'Save sent messages' should be ticked, other tick boxes do not need to be ticked.
7. On the 'Retrieval mode' drop down, select 'Auto in Home Network'
8. On the 'Attempts before giving up' drop down, select '3'.
9. On the 'Photo resolution' drop down, select 'Original'
10. Tap on the 'Servers' Tab
11. Select 'New' or Tap ok O2UK to edit.
12. Type in Server name 'O2UK'
13. Select 'Gateway' and type in '193.113.200.195'
14. Select 'Port number' and type in '8080'
15. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
16. Select 'Connect via' and select 'My Work Network'
17. Select 'Send limit' set to 300k
18. Select 'Wap Vesrion' to 'WAP 2.0'
19. Tap 'Done'
20. Highlight 'O2UK' and click on 'Set As Default' then Tap 'OK' twice to return.
The MMS settings are now complete.
I used the following settings when I switched.
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Pocket PC manual set up instructions.pdf
The only difference I can see is the username used.
May be worth a shot.
Thanks.
I've managed to get the internet working. However the MMS is still not working.
Any suggestions?
Okay I'm still trying to sort this.
I can use my handset for internet. Though it won't let me send email from either my Yahoo or my O2 email accounts. However it does download the yahoo mail.
I still can't get the mms working.
I read through the instructions linked and they seem to be for a slightly different windows setup.
I get the Start - Settings - Connections - connections tab then when adding new it doesn't give you the option of Generic IR Modem. you have the option of Generic IrDA but then it prompts you "Enter the number exactly as it should be dialed. Include any extra numbers such as an outside line or credit card"
I have previously chosen "Cellular Line (GPRS, 3G)" Then filled in the service settings as close as possible.
The APN, - Next
username, password,- Advanced - TCP/IP -Use server-assigned IP address
servers - use specific server address
DNS, Alt DNS - OK
Finish.
There appears to be an awful lot of other things I should be able to fill in, but can't find.
It is windows mobile 5 I'm using.
Anyone got any suggestions. I know there was a weird quirk with some setups so that you had to mms yourself a pic before you could send to anyone else, but this doesn't seem to be the case here as I've tried that too.