Is there a way/software that will turn on the camera light of the wizard?
It is handy in dark areas to be able to say press and hold the camera button and have the light go on...
...it will drain your batteries and decreases the lifetime of the 'lightbulb' enormously. Try attached plamp instead...
nah, the "flash" is a suface mount LED. LED's have a very long lifespan... it will long out-live the phones operating life.
Handy program, thanks!
...stupid of me, i never looked for it:
in my screen i've got 3 icons to the right: a lightning strike (i thought for autoflashing), working set and folder my pictures.
If you tap lightning strike lightning led stays on...
See, ...still learning by helping eachother...
Krinkiespijer said:
If you tap lightning strike lightning led stays on...
Click to expand...
Click to collapse
yeah but then how do you get it to flash right before it takes the picture like all cameras with a flash do? because with the lightning bolt with a line through it doesn't have a flash...
...probably i've got a flash problem. Mine doesn't flash. I only can activate the light. I never noticed this because normally i use a digital camera (4Mpix) for pictures.
I don't believe it is a flash. It is only a light.
well it is the same as a flash, but it just stays on... i guess it is to help the camera so it doesn't have to adjust so much in a little bit. But it is kinda annoying trying to take a picture of youself with the light on.
The LED for the Wizard doesn't flash, it merely stays on.
well... technically it DOES flash...
It stays on to light the area, then when you actually take the picture it gets super bright (flashes) to light up the area for the picture.
Agreed, once the light is on (no slash on the lightning) it will flash (get brighter, not like a real flash but brighter than before) when u take a picture.
A program would be useful anyway to voice-command launch this feature...
Any Ideas?? (VJCandela does not seem to work on wizard T-mo 2.26 ROM)
So....Any programmer willing to help????
Related
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
FrancoBollo said:
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
Click to expand...
Click to collapse
I may be wrong but i was under the impresion that this was a sensor rather than a LED.
No, that's entirely correct, it is the light sensor. The LED is in the power button.
the status led is on the power button on the top right hand side of the blackstone...the place u highlighted is a sensor as what scotia has point out..
I think that it is a proximity sensor used to blank screen when you put the phone on your ear to talk.
It's actually the light sensor used for when you have automatic display brightness enabled. When it's dark, it turns down the brightness... And when it's a sunny day it cracks it up. I am not sure whether it's used to blank the screen during a call... This seems to happen after a period of time has elapsed.
Gav
ok thanks for the info.
So does the power LED on the top side flash any color to show the status of the reception or does it only light up orange when it charges?
Thanks.
doesn't do anything for reception..although mine flashes green hen I have a message/email/reminder
pity though, a decent LED to show such things was probably high on everyone's wishlist
No, the HD is perfectly unobtrusive. On my last PDA the LED had to be tweaked to stop flashing.
Too bad this isnt a LED diode Since I got on my Diamond a light notification (on the bottom of device)... when I recieved new sms... now on HD there is no way I can figure do I have new sms or notification unless I turn the screen on. The only hardware flaw by mine opinion
When its lying down, I agree with you. Then I have to turn on the screen. However when its lying next to me I'm usually not in a place were I can't use my phone, so the sound is on anyway.
I actually think its quite good the LED is on the top, it's easelly visible when the phone is in my pocket. I just have to pull the phone up a little and look down to see the LED (no need to get it out and turn the screen on). I like it on the top, nice and discreet, and not anoying me when I'm looking at the device while using it.
Perhaps a combination would be nice? Front and top That would sattisfy most people I guess...
I have a CDMA Hero from sprint in the US and am wondering if it has dual LED notification lights. I have read in lots of places that it does but am wondering if it actually has dual LED since my notifications only light up the left side. From the dash 3G I remember that the LED on the left was an LED and the one on the right side that looked like an LED was actually the light sensor. I also know that the Hero is supposed to have a light sensor. Just curious, thanks for any help.
::crosses fingers and hopes for Dual LED::
I think (I don't have a Hero yet, I'm just going off the online documentation for it), that the trackball acts as the second indicator "LED", but there isn't one on the right side of the earpiece, only the left. The trackball flashes when you have an incoming call or a notification.
sounds like it's the other way round from the GSM one then...the GSM has the LED on the right and the light sensor on the left.
no Dual LED's
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
the one on the right is the light sensor.. cover it and it goes dim.
dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
The LED on the left will change color and flashing pattern depending on your battery life and whether you have notifications or not. No notifications, no light (at least from what I've seen). If you're low on battery, the light goes yellow, and if you're within the 10-15 min boundary or less for battery life, light blinks red.
Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.
dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text
erasmogjr said:
Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.
Click to expand...
Click to collapse
I meant to say it does not change colors for notifications lol....but good info though.
ratchetjaw said:
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text
Click to expand...
Click to collapse
I read somewhere the flashing trackball doesn't work on our CDMA Hero
That would make sense since I can't seem to get my trackball to flash, what a bummer. Hopefully we can get root or a software fix soon.
T-Mobile DASH 3G Led Indicator Lights
I have a T-Mobile Dash 3G. The left LED light is NOT flashing, and I would prefer that it does. I upgraded to WM 6.5 and I think that is what disabled the LED since I have seen videos on youtube where the indicator does flash.
The LED does glow orange and green when i am charging though.
Err I think you may have the wrong forum. This is for the HTC Hero, which runs Android not WM. Why not try starting your own thread in the correct Forum as you are more likely to get an answer there?
When Focus is charging, there is no LED light to indicate this.
Is this just an issue with my Focus, or is this happening to other people?
Yep, same issue here with no LED notifications of any kind.
is there even supposed to be a LED?I think I only see a proximity sensor and a light sensor
There is no LED, you just look at the upper right and see the power status as it has a 'power plug' logo inside the battery meter.
Reports are same with the Dell Venue Pro.
Also, people have mentioned that the iPhone 4 has no led either and people seem to make due with it.
I think the idea it to try to forget about the battery so much and just use your phone.
on wm6.5 I spent alot of time worrying about stuff like battery life, and what was using up my battery.. and what program was running when the amp usage was high.. and make sure I turn off push email when I am home..
but with windows 7.. I am trying to not worry about those things. I plug it in at night.. and no LED is better for sleep.. then I use the phone all day and never worry about if a program is eating up memory.. or other bugs that made me crazy with wm6.5
and the absolute best thing about the phone is that it is NOT an IPHONE!!!
ok so this phone is supposed to not have a led right? i was at a party last night and in a pretty dim lit room.. made a phone call and there was a faint red light that you could see just left of the upper spreaker grill... so if you go into a dimmly lit room and wanna make a call you can see a light there.. i dont know if this is just something from inside the phone making the color or if it is a led that will be accessible with a future update.. just wanted to share that.. loving this phone!!!
I upgraded to the latest ROM version 3.14.831.3 couple of weeks ago, after that I found the camera flash light does not work when switch to always on mode. The flash light would be not on until I take a photo which acts the same as the auto mode.
I have tried the factory reset, which seems it only restore back to the latest ROM with clean settings, but the problem is still there.
Any one has same issue?
Yes, it's the new software version that does that.
I was thinking if we could take the files from the old camera software and put them in this version.
It's annoying not just if you want to use the phone as a flashlight (solved with torch app, but not that handy) but the picture quality in low light conditions totally sucks, because it won't focus when the flash is on.
This is by design... it's SUPPOSED to behave like that! The way the flash illuminated constantly like a torch/flashlight in the old ROM was very annoying... it wasted battery power, blinded your subjects and was distracting for everyone else around. You won't find a conventional 'proper' camera exhibiting this behaviour (actually, they can't anyway due to the way xenon flash tubes work).
The new flash behaviour in the new ROM mirrors how a conventional camera would behave and, IMO, is a big improvement.
As for focusing, I've never had much of a problem and think the HD2 does a very good job in low light most of the time. The only real solution to accurate low-light focusing is an IR focus-assist lamp.
ian_uk1975 said:
it wasted battery power
Click to expand...
Click to collapse
+1
Battery Power..
ian_uk1975 said:
This is by design... it's SUPPOSED to behave like that! The way the flash illuminated constantly like a torch/flashlight in the old ROM was very annoying... it wasted battery power, blinded your subjects and was distracting for everyone else around. You won't find a conventional 'proper' camera exhibiting this behaviour (actually, they can't anyway due to the way xenon flash tubes work).
The new flash behaviour in the new ROM mirrors how a conventional camera would behave and, IMO, is a big improvement.
As for focusing, I've never had much of a problem and think the HD2 does a very good job in low light most of the time. The only real solution to accurate low-light focusing is an IR focus-assist lamp.
Click to expand...
Click to collapse
If it is by design, HTC should disable the option in the camera mode to have the flash light always on. And also disable the flash light in the Camcorder too, it works totally fine in the Camcorder mode.
Plus they do not mention this change in the ROM description.
xiaohan said:
If it is by design, HTC should disable the option in the camera mode to have the flash light always on. And also disable the flash light in the Camcorder too, it works totally fine in the Camcorder mode.
Plus they do not mention this change in the ROM description.
Click to expand...
Click to collapse
I think you're misunderstanding how the camera app is designed to work... when you select the option to force the flash on, you're telling the camera app to always fire the flash, regardless of the ambient light level. The flash LED is not supposed to stay lit the whole time that 'force flash on' is enabled and using the flash LED as a flashlight to see where you're going has got nothing to do with the camera app. By modifying the behaviour of the flash LED in the new ROM, HTC have replicated the behaviour of a regular camera and have enhanced the camera app in doing so. Having the flash LED constantly on has got nothing to do with taking better pictures.
When in video mode, of course the LED should be constantly on as its purpose in that mode is that of a video light. This is correct functionality.
ian_uk1975 said:
I think you're misunderstanding how the camera app is designed to work... when you select the option to force the flash on, you're telling the camera app to always fire the flash, regardless of the ambient light level. The flash LED is not supposed to stay lit the whole time that 'force flash on' is enabled and using the flash LED as a flashlight to see where you're going has got nothing to do with the camera app. By modifying the behaviour of the flash LED in the new ROM, HTC have replicated the behaviour of a regular camera and have enhanced the camera app in doing so. Having the flash LED constantly on has got nothing to do with taking better pictures.
When in video mode, of course the LED should be constantly on as its purpose in that mode is that of a video light. This is correct functionality.
Click to expand...
Click to collapse
I think you're right about this. What would be nice is if there was a way to have a little more control over it. For example - if you're in reaaally low light and want to take a picture you can't even see what it is you're trying to take a picture of unless the flash LED is on - so I understand the op's frustration. What would be ideal is if there was a way to tell the HD2 to activate the LED flash X seconds prior to taking the picture. That way you could make it come on for a second or two before it takes the pic so you can actually see what you're takin a pic of.
or, for those rare times when the light must be on when taking pics, you could always turn on the torch and then start the camera.
Any recommended torch app for HD2?
samsamuel said:
or, for those rare times when the light must be on when taking pics, you could always turn on the torch and then start the camera.
Click to expand...
Click to collapse
on my device that results in overexposure
I've had a problem off and on, sometimes the camera stops working and flashes pink and white instead of showing the preview image. (flash & other icons still remain on the screen--if you try to snap a photo it sometimes turns on the flash and keeps it on--sometimes a bright light such as light bulb or sun will sort of show up--restarting often does not help)
here is the problem: the shutter is not opening. It might be opening a little, but not all the way. You might hear it click.
Here is the (a) fix: smack your camera. Forwards or backwards, using the palm of your hand. Moderate strength.
If there is a more elegant fix, I'd like to hear.
150kwh said:
I've had a problem off and on, sometimes the camera stops working and flashes pink and white instead of showing the preview image. (flash & other icons still remain on the screen--if you try to snap a photo it sometimes turns on the flash and keeps it on--sometimes a bright light such as light bulb or sun will sort of show up--restarting often does not help)
here is the problem: the shutter is not opening. It might be opening a little, but not all the way. You might hear it click.
Here is the (a) fix: smack your camera. Forwards or backwards, using the palm of your hand. Moderate strength.
If there is a more elegant fix, I'd like to hear.
Click to expand...
Click to collapse
might need to replace the camera it self. sounds like a hardware failure. :'(