Need better "BT manager" like widcomms. Help! - JAMin, XDA Neo, S200 General

HI!
Is very satisfied with my prophet BUT where is all nice BT profiles from 2003SE?
Widcomms "Bluetooth Wizard" was way better , especially the Obex FTP profile so you could browse/send/recieve files from another phone or your computer.
Have searched everywhere. Tried all hacks and BT stacks. Like Toshiba Bcsh, Widcomms, AVE, Brainboxes etc ending up with nasty errors.
The only thing I really want is the Obex FTP stuff.
Have also searched for a Obex file browser like "Bluetooth Commander" (PalmOS) but have not found similar software for PPC
Anyone who knows what to do?
And yes, I have went through every page on XDA-developers.com!
Heeelp
Thanks in advance
/MrX

hi rastamanne, i'm finding that my file transferring needs are being handled fine by the beam file menu in WM5.
You gotta use the crappy included file explorer however, i imagine most people use Rescos.
Anyway, tap and hold on file, and click beam. Working for me fine so far.

Related

Bluetooth sending of files ??

I know the xda II is not capable of this out of the box... Are there any third party apps that would allow me to do this??
The problem is that the XDA II uses the limited Microsoft Bluetooth stack that came with Windows Mobile 2003 instead of the full-featured Widcomm Bluetooth stack used in iPAQs. The Microsoft Bluetooth stack doesn't support the File Transfer profile nor the Network Access profile. Someone has taken the Widcomm stack from the iPAQ and adapted it for the XDA II. Just search this forum for "BluetoothGPS.zip" and you'll see lots of discussions concerning this. But note that this is a hack.
Hi Jargon, Thanks for the reply.. Would it do my xda II any harm if I download it? or would it mess it up? .. If I download the bluetoth gps thru what software can I tranfser files via bluetooth? Thanks
sleekool said:
Hi Jargon, Thanks for the reply.. Would it do my xda II any harm if I download it? or would it mess it up? .. If I download the bluetoth gps thru what software can I tranfser files via bluetooth? Thanks
Click to expand...
Click to collapse
I haven't used the hack myself (I didn't want to void my warranty). So I can't speak from experience. But you can find the info you need by searching the forum for "BluetoothGPS.zip".
Nah, If it voids the warranty... Jargon, Thanks for the reply again, would you happen to know how to remove application icon/shortcut on the program menu that has already been removed from the system? another thing, I also accidentally auto-configured the phone to the 1010 settings, how can I remove the settings and the app icon/shortcut on the program menu? thanks
sleekool said:
Nah, If it voids the warranty... Jargon, Thanks for the reply again, would you happen to know how to remove application icon/shortcut on the program menu that has already been removed from the system?
Click to expand...
Click to collapse
Yeah, just launch File Explorer and go to the "WINDOWS\Start Menu" folder. Look for the unwanted shortcut in that folder and in all its subfolders. Then delete the unwanted shortcut and you're done.
sleekool said:
another thing, I also accidentally auto-configured the phone to the 1010 settings, how can I remove the settings and the app icon/shortcut on the program menu? thanks
Click to expand...
Click to collapse
You're not alone. I once made the same mistake. To fix it, I used PHM Registry Editor to search and delete the "1010" settings in the Pocket PC registry. Then I manually reconfigured all the connection settings (Settings->Connections->Connections->Advanced and MMS Composer options). After that, I removed the AutoConfig icon from the Start->Programs list to make sure I don't make the same mistake again.
I hope this helps.
you bet it helps.. I did it !! I removed the application icons at last. Thanks Jargon. :lol:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Is this a software? or something that might void my warranty?
it says on the update improvements that it still cant send files thru bluetooth until the future versions.. can it?
sleekool said:
Is this a software? or something that might void my warranty?
it says on the update improvements that it still cant send files thru bluetooth until the future versions.. can it?
Click to expand...
Click to collapse
You can send file using bluetooth, just launch File Explorer (don't use Resco Explorer, it doesn't work with Bluetooth file transfer), tap and hold the file you wish to beam, then select Beam File... from the popup menu, just wait for your available bluetooth devices to be listed, then just tap to send the file...
I'm glad to be wrong on this one. I've just successfully transferred a file from my desktop PC to my XDA II via Bluetooth (Microsoft stack). However, I still can't figure a way to transfer a file from my XDA II to my desktop PC. My XDA II can detect my desktop PC but the file transfer always fails.
horsy said:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Click to expand...
Click to collapse
I have NEVER been able to log on tyo that link, I have tried lots of times, any solution?
cruisin-thru said:
horsy said:
http://bluetooth.i-networx.de/index_e.html
the bluetooth tool in here, use for xda2
Click to expand...
Click to collapse
I have NEVER been able to log on tyo that link, I have tried lots of times, any solution?
Click to expand...
Click to collapse
try this link http://www.angeltowns.com/town/bluetooth/
I managed to get that file, however I am no nearer getting my pc and xda2 to sync, or send/receive files. I noticed that once the patch was loaded that "bluetooth" option in activesync vanished. My pc can see my xda, however it cannot browse the files or vice versa. Simple tasks should not be this difficult, I have spent a whole day on this, I even used the latest and greatest widcomm software to no avail.
As an addition to the above, I thought I would try to see if I could have better results using an ipaq 3870, within 10 minutes I had Obex file transfer and activesync through bluetooth working. All I managed on the xda2 was to send files to the desktop using right click/beam command. The ipaq software is far better and does almost all the work for the user.

[Universal Owners] Please upload Comm Manager For Wiz Users

The wireless manager in the universal seems to have the Phone Off,BT,Wifi and all off.
While the Manager in the wizard has Vibrate,Ring,Wifi,BT and activesync.
Can we get the universals manager on the wizard?
vbguru613: I doubt there's any reason why you couldn't do a rom rip and move it across. But why Universal to Wizard? Wizard's sounds better.
I kinda made a command line utility to replace the manager, given VGA difficulties of the manager on the Uni. But Wizard's could be much more interesting.
V
can you send me the CommManager from the universal?
I'll try to get to it, but I'm not near my home PC until later today. If anyone else has got a copy, jump in!
If you've got it at hand, wanna trade me your Wizard's manager
V
I need the Universal comm manager too. I dont see the point of turning on vibration in an application called COMM manager!!
Comm Manager Wizard
Here it is.
If you have a universal please do the same.
To developer guru's I suggest:
ON/OFF:
- Phone
- WiFi
- BT
- IR
- Proxy
and maybe: - sound ON/OFF (Ring/Vibrate)
I think will be a good APP.
arp - I've got a new app I'm working on, VJBlooToof (temporary name, maybe). A couple of guys are trying it out right now, but it's basically going to be an interface to most comms stuff.
I haven't added proxy and vibra, but I'll look into it. Also some other hacks not mentioned on your list :wink:
V
VJ,
I think You can do it! :wink: Will be a great program!
Names: VJComm; VJCManager; VJAllComm (I like first!)
Do you develop in VB? What toll?
Thanks
Arp - I develop in c++ unfortunately. It's not for people who want to keep their hair until they are 30 :evil: It can be very frustrating, but I'm getting used to it slowly. (on the PC I develop in VB, if I need to write any quick programs.)
Hmm, the names are too obvious :wink: I'm thinking of VJVolubilis.
It started out as a small app I made to test VJElectrify (programs to test bluetooth/voice command on the Universal). I put some other functions into it, but I will use the code in some other apps that control communications. But for me, at least, it's useful to have access and control over all communications functions in one place.
V
[Universal Owners] Please upload here
Just tried to copy Comm Manager from my Exec but it won't let me (Access denied). How can I get past this?
can you explore your universal from active sync and in the windows folder can you "Copy" it to your desktop and then upload from your desktop.
No, that's what I tried to do - it won't let me copy anything from the Windowsdirectory - either through Active Sync or on my device Any ideas would be great!
can you copy from your device to somewhere other then the windows directory internally using REsco or file explorer.
Or maybe the file is running. you have to end the process to copy it use the attached file (copy to device and run it) and end the process tree of commngr.exe and then copy it.
Tried resco, tried the task manager, tried renaming the file, all with no success. There has to be a way!
did you end the task (process tree)?
yeah, still wont copy
Uni WirelessMgr
Here you go guys.
Not sure if it'll work due to ripping procedure, but let me know.
V
VB: CommManager.exe doesn't seem to work. Does it have associated dlls?
V

EDIT Help please... Bluetooth half-gone

Here goes.
I bought a Magician a few months back. Hated the lack of space but liked the Bluetooth functionality. I could connect wirelessly around the house no problem. Sending/receiving files to/from anyone with a Bluetooth device.
Decided to proceed with BigStorage ROM Flash. Flash succesful. Enjoyed adequate space. Hated Bluetooth. I tried to get some help in this forum but the help extended wasn't exactly too successful. I was missing the [`Bluetooth] option in ActiveSync [a registry key I believe], and I couldn't send/receive files. I decided to give up on it until I had enough time to retrieve the registry key by reflashing with shipped ROM and flashing back to BigStorage.
I found the time to do it last week. Flashed and reflashed several times [every single attempt was successful], checking and rechecking for the Bluetooth registry keys. Yet I couldn't find them.
My Magician can still detect Bluetooth devices so I'm sure the hardware isn't busted. But I can't even transfer files using Bluetooth. Tried installing that Bluetooth Stack from http://forum.xda-developers.com/viewtopic.php?t=33532. Added some new features, but functionality is as stated in this paragraph.
Help? ::crycry:: hahahaha
I am now totally clueless as to how to go about this predicament..
EDIT
I've recently did the BigStorage ROM on my Magician. And everything was just peachy. Up until I tried to sync my Magician to the PC via Bluetooth.
Before I did the ROM patch, I was able to sync my unit through Bluetooth after some few hours of tweaking my system. But after I did the patch, I tried to sync it again through Bluetooth. My PC was waiting for the Magician but the unit kept disconnecting itself.
I ran Activesync on the Magician, went to its settings, and the Bluetooth option was gone. Only `USB was left along with some numbers (baud rates?), when previously it had `Bluetooth as well.
I'm sure Bluetooth works (as I've installed the CAB associated with it from the ExtRom) on the unit since it can make a device pairing and ask for a passkey and all that, but syncing through Bluetooth doesn't work anymore.
Could anyone shed some light on this for me?
Click to expand...
Click to collapse
try pairing your device to the pc! make sure that ur pc is not listed on the magician paired devices, activate the pairing from the magician through bluetooth under settings system tab through "Bluetooth ActiveSync Setup" and go from there.
let me know how you go!
errr.. ok i tried what you suggested. and i'm starting to wonder..
now my device can't see and can't be seen. i can't make a pair anymore even from the pc. my unit says 'no new devices found' yet my pc is discoverable.
broken bluetooth radio maybe (but it was working before the patch...)? or could it be a cab file i missed?
Hi i'm only new myself but you could try a soft reset then retry pairing your device, or a hard reset and see if the bluetooth works then? or maybe even try the cab file on
http://forum.xda-developers.com/viewtopic.php?t=33532
I have found that worst case senario a hard reset and look for the right bluetooth cab to install from the ext rom.
run a search on this site for ext rom and look for the post with details about each of the seperate files and what they do!
*Edit* i did a quick search and i wasnt able to find anything in the ext rom that applies to bluetooth setup or settings! so i guess a hard reset maybe the best way to find out whether is software or hardware?!!
Maybe one of the more experienced guys on this site might be able to help you further.
Hope this helps a little
thanks for your time boh113. i can still sync through the USB port so i guess bluetooth will have to wait. i just use it for wireless internet around the house when i'm not at the pc anyway.
i might try the hard reset when i have more time to tinker with the magician. but in any case, i'd like to thank you for trying to help
just an update in case somebody can help
i managed to pair my device with the pc already. but i still can't connect via bluetooth in the magician's async.
ok i found something in my registry pertaining to my problem. although i'm not sure how to fix it.
in the magician's async, under tools -> options -> PC -> options, there's a drop-down list for PC synchronization options:
`115200 Default
`19200 Default
`38400 Default
`57600 Default
`USB
there was a `Bluetooth option included at the end of the list before i did the bigstorage ROM.
going back to the registry, i found the keys to this list (although i'm not entirely sure if these are correct, but these are the only ones on my list)
HKEY_CURRENT_USER\Comm\RasBook\`115200 Default
HKEY_CURRENT_USER\Comm\RasBook\`19200 Default
HKEY_CURRENT_USER\Comm\RasBook\`38400 Default
HKEY_CURRENT_USER\Comm\RasBook\`57600 Default
HKEY_CURRENT_USER\Comm\RasBook\`USB
and to what i can see, HKEY_CURRENT_USER\Comm\RasBook\`Bluetooth doesn't exist. there are a whole lot of hex values under these keys and i'm not sure what they are for.
although if somebody could post/upload the `Bluetooth key from their device, i'd be grateful.
i'm aware that the hex values are also based upon hardware but i'm willing to try it out.
Ok i can find what your talking about but i dont have the ability to copy and paste the registry entry anywhere?!
if you can tell me how to get hold of this for you i'd be happy to help anyway i can!
most registry editors have the capability for exporting specific keys up to whole trees. perhaps if you have resco explorer and the registry add-on. or some other software similar to it. tap-hold and export?
thanks
I have resco explorer and the registry add-on but i cant find anyway to export the registry file?!
There's an option for import but thats it, also there's an option to copy but all it allows you to do is copy and past within the registry itself!
unfortunately i dont have the technical experience to do much ore tha n this, a quick guide as to which program to use and how to do it and i would be more than happy to help!
oh ok. open up resco explorer or the registry add-on. then navigate your way to this folder:
HKEY_CURRENT_USER\Comm\RasBook
there should be a \`Bluetooth\ folder within \RasBook\ what you do is tap-and-hold on that (`Bluetooth) folder until you see the drop down text list. "Export..." should be one of the options then you can specify where to put it. by default resco places it in the main memory
will wait thanks boh113
No worries found it and exported for your satisfaction!
Had to zip it ;D
hope this can help you further!
Goodluck
Much appreciated!!
Will try it out in a bit. I'll post my results after
Thanks boh113!
well, i got back the `Bluetooth option in async. but still doesn't want to connect to the pc. the hex values probably don't match the hardware in my unit. oh well. i'll test it out a couple more hours. and if i still don't get it to work, a hard reset might be my only solution. or re-flash with my original rom and start all over again. hahahaha
thanks for your help and time boh113. forgive me for having taken too much of it
No worries, sorry i couldnt have been of more help!
Good luck with it all!
*bump*

Exec bluetooth sending file ?!

Hi guys (first post yay )
ive tried to use the search funtion but its a vbulletin forum which means search is pants lol!
just got me an exec ive been playing with it for a few days now but went to bluetooth a file today and noticed i couldnt?
ive checked the mannual and it says
click and hold then click beam file then select?
but when i clicked beam file it just brings up the 'beam' option (infrared beaming)
so im lost lol
i went to the my-xda site to do sum searching and found out there was an upgraded rom so i upgraded it (thinking it was added and i hadnt got the lasted software) but no luck so im still stuck
but it looks a little nicer now lol :/
Many Help is great help
Cheers.
JollySonX.
it isn't very intuitive.
you have to wait for the destination device to come up under the IR bit (i think you have to pair first?), then tap it to send. there's no progress bar either, which is annoying
well thats annoying isnt it
Cheers.!
When you try to send the file are you using the built in file browser (file explorer)?
and is you bluetooth switched on?????
I am using Resco File Explorer to send files from my Jasjar to my PC.
First of all my PC is paired to my Jasjar. Now when I need to send a file all I need to do is to switch ON the bluetooth on the PC, navigate to the file with Resco which is to be beamed from the Jasjar to the PC, press and hold on the file which brings the context menu, "send to..." "Bluetooth Receipent...", select the name of my PC and the file is transferred. I do not even have to swich ON the bluetooth on the Jasjar. Resco automatically switches bluetooth ON and once the file transfer is complete bluetooth is automatically switched OFF.
Regards

How do i use Bluetooth Explorer to transfer files with a mac?

I've tried searching and all i can come up with is "i use bluetooth explorer to transfer files with my mac."
I cant seem to get it to work myself. I do have bluetooth explorer. I would apreciate it if someone could either give me directions on how to set up and use this or point me to a post thats allready done it.
Thank you in advance
Dan
I've never played with it but I think you first might have to configure your Mac. IMHO it's made a bit too tricky by Apple.
Go to the Bluetooth settings panel "Sharing", configure the bluetooth sharing point for the "BT file transfer" option. That's the folder that should be made searchable by your device. Then start the BT file transfer service with the Start-button and try to browse the files of your Mac.
i tried that. It just searches indefinitely...
i tried it a few minutes later and now it strangely works....
hmmm thanks
unfortunately it constantly locks up my phone when switching between folders and when i try to copy stuff

Categories

Resources