Is any useful way to remap the Green and Red Phone button and the volume slider button? I mean for launch application or any function. Thanx.
There are some such programs for volume slider.
The most simple I prefer is attached here.
Just put it to the \Windows\Startup folder. It just "unbind" slider but not remaps it to another buttons. This will allow to use slider as F6/F7 buttons in programs able to hook them e.g. Haali Reader...
Thanx
It seems to be ok but where did you attach it? On my MDA is no offered file to download at this time. ThankU.
I've got it
Ok. Now is the sheet with uploaded file appeared. I've got it and extracted it. After i run the *.exe file it does nothing. Why?
because it should do nothing
This utility just frees slider buttons from default binding to volume control.
If you have an application that understands F6/F7 hardware key pressings (slider up/slider down) you may bind these key in the program.
As for me - I use them to scroll text up and down in Haali Reader text reader program.
But (as I said above) there are another programs to use slider up/down control. Unfortunately I don't remeber where I saw these utilities - but they really exists
And, as far as I'm back to the Andes from (Blue Angel) - I think I will write another one specially for Himalaya/Andes.
Ok, let's wait some days. If there are any results - I'll post the report here
P.S.: BlueAngel is the best HW keys equipped device i've ever saw But...
Thanx once again
Thank you 4 ur help. Now i understand that. And what about the Phone buttons? Any ideas? Ex.I want to use red button as Ok/Close simulation. Any ideas how to do that? Thanks.
Nobody unmaps phone buttons. It is possible but unresonable because of HTC is a phone device also. But I'll implement this feature too.
OK
I will wait for it.
The very first (and buggy) try of HW remapping utility is done. The application setup is available HERE
After installing .CAB file go to Start -> Settings -> Buttons and see the changes...
DO NOT INSTALL THIS APPLICATION ON BLUE ANGEL!!!
It will hide four lower hardware buttons until hard reset!
1. This app was tested on Andes with WM2003se, but should work on Himalaya/Magican with WM2003 and above
2. You will lose the possibility to use hardware key mapping in other applications forl remapped buttons. I need to re-grab buttons from time to time because the system tries to thieve them from me
3. Currently I don't now how to emulate green and reed buttons functionality after unbinding them from the system.
4. I can count any number of button pressings (3,4,5...), but -
5. WinCE reserve codes for only 15 hardware buttons (40C1..40CF)
There are some ideas for future improvement. But it would be nice to know your thoughts.
Just to "stimulate": I can create settings screen during setup to allow flexible configuration where you will
- choose which buttons to handle and how many key pressings to detect;
- choose option to unbind and/or re-map volume and phone buttons
- ???
And let me take a time-brake for 2 days before next programming session
The utility is ready. It allows you to:
remap each standard hardware button to 2 or 3 "virtual", simulated via double or triple clicks;
use volume slider to simulate Up/Down direction keys or create additional "virtual" hardware buttons;
remap Red and Green phone buttons to 1,2 or 3 hardware buttons each.
In a result you may create up to 15 hardware buttons (system limit)
Just install program and check Start -> Settings -> Buttons.
Here is Oficial AEBPlus home page, full desktop-based setup (~27K) and Direct link to CAB file (~30K)
Well done!
Excellent software! Thank you once again for your work. Works very very well!
man this is great really like it
works perfect :lol:
Seems to work great. Haven't had it running long enough to see if the camera button will get stolen back (big problem for me on XDA IIi), but being able to map the volume is great.
In the next version any chance of adding an <enter> option like Vito Button Mapper which I think just sends a <carriage return> to select whatever is highlighted.
Is "<Ok/Close>" option in button settings applet not the same?
NO, <OK/Close> generally tends to close the current window rather than selecting whatever is highlighted.
Also whatever application keeps on stealing back the camera button is still doing it. I don't know if it is part of the UK O2 customisations or the core PocketPC Rom, but eventually whatever function is mapped to the Camera button gets re-mapped back to the camera. This also happened to me with the standard button mapper and Vito button manager. It's a little annoying since the camera button is the most usefully positioned, and it is also easily knocked, starting the camera at awkward times.
Ok, I'll add this option for camera button (a bit later, in a case other suggestions arrives).
As for the re-hooking button by camera application: AEBPlus initializes all of the buttons from time to time. Currently this take place every 30 seconds. So if you will wait a bit - all buttons should be re-grabbed again
This does not seem to help because whatever application that is resetting the camera does it in the same place as you are storing the button mappings. When I go into the Buttons Setup it will now say that the Camera button is mapped to the Camera.
Yes,I see... It looks like Camera application is a pushy application . The solution is to remap "normal" Camera HW button to 3 press instead of one, but I don't like this.
Anyway - utility was released.
New features: added option to emulate Enter key with Camera button.
Hi AE, your utility is great. It is very useful but SIMPLE and SMALL.
I used it instead of other button mapper software.
There're some issues need tobe improved:
1) Mapping "Green" and "Red" button:
Enable mapping when they're iddle only (phone function does not work).
E.g: I'd like using Red button to close running app. But in phone function, Red button is still used to hang-up the phone as original its function. Anytime I have a phone call, I can use Red button to cancel a outgoing/incoming call.
You can refer the program of mamaich in this web site.
2) Single press is too low:
I press a key one time and wait 5 secs or more until it works. It's too slow. Can you improve? Double-press is OK.
3) Press n hold:
Can you add "single press n hold" for all hardware-keys? I think "single press n hold (after 3-3.5 secs)" is more convenient than "double press" or "tribble press". Do you think so?
Hi AE, very usefull application! Is there any way that we can have an options screen, where we can change the key options we get after installing the app? That would be easier to edit our preferences if we want to make changes to our initial choices. Furthermore I added a Mortbutton to one of your simulated hard keys. Each Mortbutton can show a list of 12 apps for a buttonpress. That means That I can now bind more than 60 apps to the buttons in total! Very good for one-handed use of my Magician, thanks!
Does anybody know how to change the new keys on the TyTn - the start menu key and the ok key?
heya,
at the moment, am using a 3rd party app called ae button plus to capture and remap, note only 2.4.3 beta onwards can perform this remapping.
There are some anomalies though, ie, though my resco explorer's mapped to 2 key presses of the windows key, i'll have to depress it 4 times for it to work.
Does any1 know how to remap the 'ok' hardware button?
Thank.
hi,
you can use a 3rd party software to capture then reconfigure the "ok" even the "windows" button, like AE Button plus (ver 2.4.3 beta onwards).
However, its not really perfect. The "windows" key especially. i.e. have mine set to open resco file explorer which 2 depresses of the "windows" key. However, it'll only work after 4 depresses.
On my previous O2 devices, i used the messaging button to launch Voice Command, however i can't see any default way of re-mapping the bottom right "ok" button on my new 3600i.
I've read many posts about button re-mapping software, however would apprecaite any thoughts you might have for this device & WM6.
Thanks!
AS or as I know, AEButton Plus is the only way to remap these buttons.
http://ae.inc.ru/aebplus.php
I have a MAPL100 and downscrolling on the trackball has stopped working. It works sometimes, but usually it takes me 4 or 5 flicks to get it to scroll once.
That said, is there a way to remap one of the keys in the bottom right (Camera button, mail button, and inner circle key) to perform as a downscroll? Like a virtual directional pad.
Or remap a volume key?
More thoughts: the inner circle key can be customized via settings to launch a program. Is there a program that does nothing except send a scroll down signal?
Likely not. How hard is it to make one? I've hardly programmed for WM but I know .NET well so if you have any pointers towards such a program I would much appreciate them.
Thanks
Bumping this. I can't scroll down OR left!
Hi, why don't you try to flash a 3VOLUTION SERIES ROM, they have a button configuration functionally which gives you the option to configurate for long press and short press several buttons, otherwise you could try by installing SmartToolKit or AEB Plus button configurator, however in my experience these apps don't work well with stock roms as they can't seem to register the key remapping; unless of course the issue was with the sd certificates, now I couldn't tell as I'm already on the latest 3VOLUTION SERIES ROM.