Related
Hi all
Don't know how many of you guys are ipaq transferees like myself, but there is one piece of software on the ipaq that has not been adopted in the XDA series handhelds, namely REVO - the remote control tool.
Anybody into gadgets in the way that we are will have too many remote controls lying about. This tool allowed me to put them on a shelf, and use them very rarely.
So.....
Does anybody have a clue how to extract it from the ipaq ready to be placed on the XDA II. NAturally, owning both devices, one would assume that providing I use it with either one or the other, you can provide this useful information conscience clear!!!!
Look forward to any thoughts
JJ
jjcodex said:
Does anybody have a clue how to extract it from the ipaq ready to be placed on the XDA II.
Click to expand...
Click to collapse
Unfortunately, the Himalaya infrared hardware is not capable of communicating with customer devices like TV sets. There is nothing any software could do about this - only some hardware change can help.
Cheers
Daniel
Also some Ipaq's Irda are just very powerfull made..have a range of 10-15 meters.
Normally pda Irda's have a range of 2-3 meters.
not sure why the ir would be 100% incompatible with the tv
if special software written for it was used
about the range issue
http://www.smarthome.com/8220A.html
http://www.homeautomationnet.com/Shopping/remote-control-accessories.asp
http://www.pdawin.com/irtranceiver.html
suppose one of these would inc the range
i had
http://www.pdawin.com/
this software running on my xda1
too bad the range was only 30cm
Thanks for the feedback guys.
I am surprised that the range is so different between devices. I understood that the infra red transmit distance was usually further than the receive. Would this be applicable to the XDA II I wonder. I will run some experiments with a phone to see if I can assess distances.
Had a look at the PDA Win software, looks quite functional, perhaps not as slick as the built ipaq version. 30cm range... doh!
They seem to have specifically excluded the XDA II. I wonder if this is a range issue as you guys have suggested.
Hmmm......
Sounds like an excuse to spend money on a very very very posh do-all remote control!!!!!!!!! (LOL)
Thanks for your thoughts anyway.
Cheers guys
Rudegar said:
not sure why the ir would be 100% incompatible with the tv if special software written for it was used
Click to expand...
Click to collapse
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Cheers
Daniel
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Click to expand...
Click to collapse
and yet i had pdawinøs software working ok on my xda1
and also used it to comm with my laptop so some infrared classify as
both IrDA and consumer
if the range is ok then the only difference i can think of is protocol and that should be possible to work out so that software would work on the xda2
i also had my trusting old hp48 calc working as a remote at a time
prob still have the software somewhere
Well, TVs use "consumer" infrared, while PDAs use "IrDA". See here for a more detailed explanation. It has nothing to do with the power or the range of the IR LEDs and phototransistors.
Click to expand...
Click to collapse
I would have to side with Rudegar on this one, as I have not only used the Ipaq for several consumer devices but the extremely fundamental Palm III (aahhhh those were the days, when a calculator was considered to be a posh option.
I would say, however, that neither successfully worked with a sky remote, which I wonder may be due to two-way data transfer. I wonder if this is the IrDA vs Consumer difference.
I read the link to the Irda page, which as you suggest states that the two are different. I would agree that the two standards are different, but unless built-in hardware compatability is provided to the majority of pda's, there must be a way of emulating the consumer device within the IrDa protocols.
Hmmm... A little out of my depth on this one. Hopefully somebody else can explain!!
Cheers
JJ
The xda 1 I have works fine as a remote control for my tv and dvd etc, I use "learning2 mode to program the xda using the original remote handset. The xda 2 however is total crap as a remote, however if you wish to use it from one position, for instance the couch in your living room, there is a device called an infra red repeater, this allows you to operate an infra red device from a greater distance, I will see if I can find a name for manufacturer but I am sure this device exists, its selling point was enabling you to operate your cable/sattelite box from upstairs even when you had no line of sight to the box. It was a money saver because you could connect your cable/satellite to your upstairs tv instead of having to purchase a second box from the provider and be able to change channels from upstairs.
Guys,
I wouldlike to get inside the discusion because I have almost the same problem and I would like some help.
I also found the hard way that the XDA II does not work as a remote control, then I found this Total Remote software and module that really got myself impressed, I bought it and also the adaptor for the audio output.
Now I am able to output the signals without problem, the software works very fine and control the eletronic equipments without any problem.
But then I got to test the learning mode and then my problems started. The XDA II canot learn nothing! It wont recognize any kind of command that comes from any remote controler. To make sure it was not a problem of the software I tested to more diferent remote controler softwares and they also does not learn. What really make me disapointed is that even touching the controler IR led with the XDAII IRda port, the XDA II can´t learn anything.
I already tried to disable the "receive all incoming beans" and do a soft reset, but this also does not worked.
I am writing this in the hope I am forgetting something and one of you give me any more idea.
OR
To also ask for the more experts, if it is possible to substitute the IRda port with a common IR led found on any remote controler (of course doing some soldering). If there is compactibility between them, I think I will give it a go, since I really whant a remote control on my XDA II.
Thanks a lot
Felipe
thats what i've been saying all along
the xda2's ir modules is not the default ir module which all the remote software is written for
the remote applications would have to be written directly for the modules ir in the xda2 for it to work
i've come across no such applications as of yet
does anyone use noviiremote?
i receive an internar drive error....
noviiremote doesn't know what to do
is agician incompatible?
any advice?
which device u r using and which app ver u r using i have o2 mini its working fine in that
imate jam
rom 1.12.04 ita radio 1.12.10
extr. 1.12.154 ita
novii tried 2.2 and 2.3
stratoboom said:
does anyone use noviiremote?
i receive an internar drive error....
noviiremote doesn't know what to do
is agician incompatible?
any advice?
Click to expand...
Click to collapse
I use NoviiRemote Deluxe 3.2 any way check your "beem"
I've used Novi Remote on mine but the IR is pretty feeble. You need to be quite close to the TV/VCR etc in order to operate it.
I must try it...
I tried this, the software works fine but the IR on the mini/JAM is so weak you need to be less than a metre from the device you are controlling, in which case you may as well just push the buttons on the device
Perhaps some bright spark could come up with a remote extender that you could sit your phone in?
I use noiiremote 3.1.05 on my Qtek S100(magician) and i have no problem! The strange thing is that some times i can use my ppc as a remote control from 2 meters and some other times from 5-6 meters.I think that there is a way to have permanent "strong beam" on my ppc but i don`t know how...
I also noticed that when i have weak beam and i uncheck the "Recieve all wireless sends" and then check it again, the beam goes to strong again...
Any ideas?
wow that is great news.....am considering getting one but it's pricey and considered a luxury app :wink:
SSkorpionSS said:
I use noiiremote 3.1.05 on my Qtek S100(magician) and i have no problem! The strange thing is that some times i can use my ppc as a remote control from 2 meters and some other times from 5-6 meters.I think that there is a way to have permanent "strong beam" on my ppc but i don`t know how...
I also noticed that when i have weak beam and i uncheck the "Recieve all wireless sends" and then check it again, the beam goes to strong again...
Any ideas?
Click to expand...
Click to collapse
Hey i did try out the idea given by SSkorpionSS and i dono how it did but it did work..i did verify it...if u uncheck recieve all incoming beams and again check it..the beam goes strong again......
Thanks SSkorpionSS for the idea....
SSkorpionSS, you're the man!!!
If you guys have balls of steel, disassemble your device and check what kind of IR transmitter is in there. I am sure the electronic part market has other transmitters to offer, which are more powerful in the same size factor. Anyone experienced in electronics should be able to find out. And do the solder job if he is properly equipped. I remember to have read about someone who pimped his Wallaby doing this. Don't know about the Magician though. Maybe it is SMD part which makes soldering way more complicated.
psych0t1c said:
If you guys have balls of steel, disassemble your device and check what kind of IR transmitter is in there. I am sure the electronic part market has other transmitters to offer, which are more powerful in the same size factor. Anyone experienced in electronics should be able to find out. And do the solder job if he is properly equipped. I remember to have read about someone who pimped his Wallaby doing this. Don't know about the Magician though. Maybe it is SMD part which makes soldering way more complicated.
Click to expand...
Click to collapse
I realy have no problem with the hardware of my magician`s ir but with the software, because it weakens the signal for some reason. Maybe to search for other ir recievers. Anyway, I am just fine with this "trick"!
SSkorpionSS said:
I also noticed that when i have weak beam and i uncheck the "Recieve all wireless sends" and then check it again, the beam goes to strong again...
Any ideas?
Click to expand...
Click to collapse
Maybe vijay can program some hack that repeatedly enabled and disables this setting. Or maybe he can find out what the reason for this power decrease is and eliminate this...
Hey everyone! After searching on the forums and other sites for a long time i have came to a holt!
I'm looking for a IR remote control program for my T-Mobile MDA USA WM5 (WIZA200), and I have tried alot of programs... Lets see, so far no luck at all, most of the programs I downloaded install fine and I can run them but no IR ANYTHING! They can't seem to send or 'Learn' any of the IR signals.... So it makes me really frustrated, and I am wanting a program to control my home intertainment center..
If anyone could help with maybe supplying me with a download link or maybe one of the programs that have been 'modded' to run with theWizard then that would be awesome!
Thanks in advance, hope to hear a reply!
i dont think the hardware on the fone is capable to support the function you want....but im not 100% sure
hmm, can anybody confirm this, the wizard does have a IR port, and most of the programs installed and runned fine(other then it couldn't send or receive IR....)
Hi, I just remeber when I was reading some reviews about the wizard that a review had confirmed that:
The reviewer said that he could use the kjam as a remote controller for his TV and DVD player from almost any distance within his room.
I was happy, but I have some doubt with regard to (any distance), since I think that IR range is not enough to send for a 4 meters distance!
I really dont remember where I have read this but I am sure that I have read it, so I think that the wizard is capable of using IR as a remote control, but there is somehow a lack of software support for this issue.
good luck all
Hi, just a corrrection, may be I have mixed things up.
I searched for the topic on the internet and I found that it was talking about JASJAR, here what was exactly written:
"Originally Posted by Tekflow at http://forum.xda-developers.com/viewtopic.php?t=30449
This is one good surprise. I have been using Pocket PC Phones since the first O2 XDA, then XDA II, then i-mate PDA2, and none was really compatible with any TV remote control software (unless you sit at a distance of 1 meter from your TV!). But now everything changed with the Jasjar. The IRDA is so powerful: I am using it as a TV/DVD/VCR... remote control nearly from any distance (even with small obstacles between the TV and the Jasjar). I tried NoviiRemote and Total Remote: they both worked perfectly.
Good news!"
Click to expand...
Click to collapse
the link is: http://forum2.mobile-review.com//archive/index.php/t-35506.html
but do you think that the IrDA port of the kjam is very different from JASJAR's?? I really need to know! tell us guys!!
As far as I know Novii is currently looking at the specifications of TI chip so that they could customise their famous Novii TV Remote to work with Wizard.
PPB
So I desided to write a little dilly about what remote programs don't work for the MDA! ( AKA: WIZA200 )!!
So it starts here!
#1 Vito Remote - Will not reconize the IR port! ( What a supprise! lol )
#2 Novii Remote - Don't even start with this one, nice interface though!
#3 Windows remote II ( I think...)
Feel free to add to this list! And if you find a IR remote program for the MDA then please fill us in!
Right now i'm testing Total Remote, but don't get your hopes up, it seems to lock-up when trying to train, but I'm not giving up yet because I might have some settings wrong!
BTW Bust I can't wait for Novii to get that done!
I only have a wallaby, but the hardware is just about the same, as far as the IR is concerned.
I'm not familiar enough with the newer devices, but I do know that the ir components in the wallaby/BA, and many other pda devices from that time period, are capable of being used as remotes, with the only real drawback being transmit distance (the hardware is not the same as a real remote controller).
I use pdawin's tv remote 5.5, and it works about 8 feet or so (about 3 meters). it learns and what not.....
another post I have read says that netremote from proximus also works..... good luck
i'm not sure about the jasjar, but keep in mind that consumer ir is what has a much longer distance
my clie worked really far away
i tried the jam's ir and it was 2 meters ish
haven't tried the wizard's ir for remote though
Hmm, see the thing with the Wizard is that I can't find a program that will reconize the IR port, it's not a distance problem.... So if anyone knows of a remote program for the Wizard, then that would be awesome!
don't bother
It's not worth your time. Both the jasjar and the wizard have FIR or Fast infared which means it will only transmit about 2.5 feet (if your lucky)away from the reciever. You need to find devices that use CIR or commercial infared. I'm pretty sure they don't make one in a minisd format so you will have to play the waiting game. Another way aroung this is to get a remote repeater and have your infred port right next ot it but that sucks also
It's not worth your time. Both the jasjar and the wizard have FIR or Fast infared which means it will only transmit about 2.5 feet (if your lucky)away from the reciever.
Click to expand...
Click to collapse
It seems that JASJAR users are more lucky than u think, they got their remote control functioning from 'nearly any distance'
See my upper post and good luck
novii remote works fine
see this threwad for a similar discussion:
http://forum.xda-developers.com/viewtopic.php?t=43678&highlight=
just installed the novi 4.0 beta trial version and it works with my wiza200.
distance varies:
TV aprox. 3m
DVD (is on floor): 1.5 m
but TV is fine for me since the original remote broke into pieces and is just hold together with tesa.
Tried noviiremote and it will not work at all.
All the reviews say it does have irda but the HTC site is not clear.
Any ideas?
If it does can anyone recommend remote control software?
Thanks
someone must know if it has Irda!!
trinity have irda. I have novi remote deluxe and works fine.. but you have to stay near the receiver 1 or 2 m (TV or other...)
wishmaster82 said:
trinity have irda. I have novi remote deluxe and works fine.. but you have to stay near the receiver 1 or 2 m (TV or other...)
Click to expand...
Click to collapse
I tried also with the NOVII remote deluxe, and the maxium range is 2m. Which is no point to use this as "remote" right??
It's definately there...
...but it's really only designed for device to device data transfer, not for use as a TV remote control, etc. The IRDA "eye" is also annoyingly place on the bottom of the device, meaning you generally have to turn it upside down to transfer stuff!
Lee.
leecotton said:
...but it's really only designed for device to device data transfer, not for use as a TV remote control, etc. The IRDA "eye" is also annoyingly place on the bottom of the device, meaning you generally have to turn it upside down to transfer stuff!
Lee.
Click to expand...
Click to collapse
Sure, its designed for data transfer but many other PPC have an IRDA port which with enough power to control a tv in a range of 4-6 meters.
The place of the IRDA eye is not a problem. There are some programs which can flip the screen upside down. I often do that because i have an IRDA Keyboard.
Greetings,
Borbosch
novii remote will invert screen but I could not get it to work at all. Maybe I was not close enough
wingnutLP said:
novii remote will invert screen but I could not get it to work at all. Maybe I was not close enough
Click to expand...
Click to collapse
Do you mean it won't invert by itself when you launch noviiremote on your handheld? I'm asking because this application will do it by itself on my PDA
mrsmart said:
I tried also with the NOVII remote deluxe, and the maxium range is 2m. Which is no point to use this as "remote" right??
Click to expand...
Click to collapse
Well, at least you can use your handheld as a wake-up remote:
novii have just surprised me - they released the WAWA alarm software (http://novii.tv/pocketpc/wawa), that will let your handheld turn on your TV (or whatever) to wake you up in the morning. I liked it so much!
Moreover, it can be used as a conventional alarm software with all functions that any alarm software will have.
Hello, I have got two PDA, HP HX4700 and HTC P3600. Novii remote with the HP 4700 has a range of 15mt the P3600 only 1 mt. The internal codes of noviremote works fine with the HP HX4700 but doesn't works with P3600. The only way to use noviremote with P3600 is use the learning mode for every device, I don't know why.
tuttoilmondo said:
Hello, I have got two PDA, HP HX4700 and HTC P3600. Novii remote with the HP 4700 has a range of 15mt the P3600 only 1 mt. The internal codes of noviremote works fine with the HP HX4700 but doesn't works with P3600. The only way to use noviremote with P3600 is use the learning mode for every device, I don't know why.
Click to expand...
Click to collapse
Hmmm... This never happened to me. Noviiremote should work finr with your P3600. I think you should contact NoviiMedia support team, they are quick to respond and usually resolve any issue. Good luck!
hi every one. first post here.
i have tried to get my vario2 to act as a universal remote and as of yet not much luck. i have tried using winpda remote software and nevo software but it just doesnt work. has any body had any success with this type of application?
cheers
sam
sam_roberts30 said:
hi every one. first post here.
i have tried to get my vario2 to act as a universal remote and as of yet not much luck. i have tried using winpda remote software and nevo software but it just doesnt work. has any body had any success with this type of application?
cheers
sam
Click to expand...
Click to collapse
I used to use some similar software with my P900......unfortunatly the IRDA port on the Hermes isnt particularly powerful so you really dont get much range out of it
Try next to the device, then try a typical distance away...say 10 feet (i think that would be a realistic distance to use a remote??).
mrvanx said:
I used to use some similar software with my P900......unfortunatly the IRDA port on the Hermes isnt particularly powerful so you really dont get much range out of it
Try next to the device, then try a typical distance away...say 10 feet (i think that would be a realistic distance to use a remote??).
Click to expand...
Click to collapse
LOL I tried it to some time ago, it has a range of 15 cm LOOOL IRDA just sucks, I dont understand why HTC even put this crab in there models..
Bram87 said:
LOL I tried it to some time ago, it has a range of 15 cm LOOOL IRDA just sucks, I dont understand why HTC even put this crab in there models..
Click to expand...
Click to collapse
For that exact purpose, IRDA! The infra red port is not intended to be used as a universal remote controller
The IRDA port on the P900 was also crappy but i got about a 5 foot range LOL!
thats what i never understood, i liked the idea first off of doing a remote using the phone but having to walk upto the TV or DVD sorta makes it pointless.
novii remote works great on my 8525..it works better on my daughters ****ty little 13" better then my plasma haha
i read about a software package that worked on wifi for media centres. does any one know the name of it?
I have used VITO Remote on my 6700, and it worked great. I have also had no luck with any remote control software on the 8525, VITO, Nevo, etc. I will tell you this much, my attempts had NOTHING come from the IRDA port. I took my 6700's camera to watch for the light and there was nothing. To make sure my IRDA port worked, I went to explorer and had it send a file, that showed activity on the port, so I know it works, just not with the RC programs I've tried. I'm going to try the NoviiRemote and see if I can get that to work and report back.
Just downloaded and tried NoviiRemote Deluxe. Nope, didn't work. I got errors straight away. I am however running a cooked WM6 ROM, so it might be a compatability issued with WM6. My previous attempts with VITO and Nevo were with the most recent HTC rom running WM5, so I know it wasn't an issue with WM6
Ok, call me stuborn. I got NoviiRemote to work. Infared is on COM3, and so I naturally used that and it didn't work. I noticed IRDA is on COM1 and tried that. VOILA! Using my webcam, I see blinkies!! So I put it in learn mode, program in my controls for my plasma and it works. Not the best mind you, I have to be under 4' from it, but it does work.
Because I'm on a roll, I try VITO and Nevo. Nevo I can't configure it to a specific port, so that isn't gonna work, and VITO pops up saying it's not compatible with my processor. No matter, I like that NoviiRemot flips the screen for orientation with the infrared port on the bottom of my 8525.
LMAO just walk over and change channels
remote
I use novii no problem on my herms
range is average, but go the custom set-up and works a treat on my Sony amp, tv/dvd/settop box, and xbox.
my 2cents
cheers
Novii Remote works great on my Hermes - not a glitch!
I have a dell axim x5 also.. I do remember a 3rd party IR upgrade kit was available, making the range nice and long.
Has anyone seen such a thing for the hermes ?