I've deleted all notifications in notification queue (repllog.exe, connmgr.exe, calnot.exe, clocknot.exe).
It was a big mistake :shock: (ou pour les francais: un gros crétins des alpes que je suis)
Activesync connection does not working anymore ..
So i've recreated notifications with memmaid :
- calnot (AppRunAfterTimeChange and AppRunAfterRestore)
- clocknot (AppRunAfterTimeChange and AppRunAfterRestore)
- connmgr (AppRunAfterTimeChange and AppRunAtRs232Detect)
- PMNotify (AppRunAfterWakeup)
- Replog (AppRunAtRs232Detect)
Soft-reset, and no change .....
Do yu have any ideas ??
Thanks for your help.
Spv m3000
French
Repllog.exe doesn't not launch where usb cable is connected ....
Dont' know why, i've added a new notification AppRunAtRs232Detect
If i launch it manually, there's no sync anymore ...
Ok i've found what is missing :
A repllog.exe notification which event : AppRunAfterRndisFnDetected !
The pb is i don't know how to create it : this event is not displayed is memmaid.
Any ideas ? :?: :?:
Well you have to laugh :wink:
repllog.exe also needs AppRunAfterRndisFnDetected and AppRunAfterTimeChange
clocknot.exe and calnot.exe also needs AppRunAtTime
\windows\calupd.exe needs AppRunAtTime
all taken from my qtek 9100 AKU2 WWE
Personally, I don't think ActiveSyn needs notification queue to be active. I think, if you were to try starting the active sync manually, and select Connect , you should still be able to ActiveSync. Just the automated one may not work if you have deleted them from the queue.
I think so, but when i launch repllog.exe or activesync manually, no sync was possible.
I need a program that talked to the CEDB to write the AppRunAfterRndisFnDetected notification.
I don't beleave that removing a simple hardware notification can be unsolve. The last chance is a cold reset, but i don't want to lost everything
Solution
Same happened to my universal.
Have a look on this webpage and you should be OK.
http://www.cs.pitt.edu/~jmisurda/ppc/blog/index.php?entry=entry051203-201515
James
Tnaks James, but the link doesn't work ...
Simply a timeout connection, ok i'll read the post.
SBP Backup
It's too late now, but a backup program like sbp backup would have saved your bacon, methinks...
So Great James
It works, the notification AppRunAfterRndisFnDetected has been added to notification Queue.
Thanks a lot.
Now activesync is connecting normaly. No need to cold reset.
Related
I had this problem discussed here:
http://forum.xda-developers.com/viewtopic.php?t=30295
So I installed today the new I-mate rom without problems.
As software I use
-Listpro (Ewallet from them I did not install as it was suspect)
-Pbreeze with pocket weather
-SPB GPRS monitor
Now what did I do, not standard, and that may be the reason:
As I wanted to use my own sounds for the calendar...
1. I dragged two soundfiles to the windows folder itselve because I found there also the other sound and warning files.
2. I told Sound and notifications to let Reminder use one of those two files to use as its sound.
(Is that where it could have been started?.. a bug in the sounds manager?)
3. I programmed a calendar appointment to test the sound.
4 It worked, but after a soft reset I got the calendar warning back with sound and pop up. Only once. After a new soft reset it did not come back.
5.From now on the calendar gives no more warning, also no screen text.
I only have 4 dups in the notification Queue.
When I had this problem before the ROM upgrade I did about the same.
Huib
Edited: So a question from me is: Are there any people that changed the standard sound in a private one, without calendar problems?
I solved it!
I think, at least.
I deleted three calendar.EXE entries in my Notification queue, and it starts working again. That means my calendar alarms are being heard and shown.
So I am close in believing it was the soft resetting that caused the problems twice. It disturbs the notification queue anyway by adding dups.
On the other hand: There must be more people doing soft resets frequently, and I seem to be the only one having problems.
Huib
Hello every body
I write here because i unlock my phone to use with my "Bouygues Telecom SIMCard" and it work very well now i have good configure his GPRS
I can receive my Mails without any bug by the Outlook system !
But in this phone, in france, there is the "Orange Mail" application instaled when you buy it, and i don't understand how to kill it and uninstall if it is possible ?
Because it is i think the "BlackBerry service" and it don't work with bouyg !
And because it bug me to can't connect his serveur
Help me please ....
I have a solution lol
It is not the TOP but it works ... go to Windows/Startup and DELETTE the Shortcut
Reboot, and the OrangeMail will never ask you to synchro again
on my XDA Exec (O2 ROM 1.30.162 WWE for last 2 months) these stopped working about 2wks ago....
Yes, in settings>personal>sounds and notification I have set for playing sounds etc etc etc...and yes, I set reminder when creating new appointments /tasks...
So...any idea why no longer working?????
It's a known "feature" of this OS. Use search for this problem with suggested solutions. None of these solutions worked for me (on my T-Mobile USA MDA).
I had to Hard Reset to get my notifications back. But I lost them again within 2 weeks. I will hard reset again whenever I get some free time.
When I ran into this same problem I also tried a couple solutions, MemMaid didn't work for me and I screwed up my device (lost the ability to ActiveSync) when I ignorantly deleted all sorts of stuff using the Scarey Bear Check Notifications tool. What did work for me was the trial version of SKTools, it has a delete duplicate notifications type tool. If the problem shows up again I'll just purchase SKTools.
I was the same problem a fem weeks ago, and my solutions was program Check Notifications. When I dowloaded this program a readed only about support for WM2003SE, but work on WM05 well.
I deleted automaticky every bad notifications in first time, but nothings happened a and my Qtek was still NO-SOUNDS :-(
I tried delete every RED notifications in check list, and I deleted every old notifications in this list in second time. I was delete this manually! After soft reset my QTEK 'again start talking '
here you have cab file for tring my solution
dort said:
I was the same problem a fem weeks ago, and my solutions was program Check Notifications. When I dowloaded this program a readed only about support for WM2003SE, but work on WM05 well.
I deleted automaticky every bad notifications in first time, but nothings happened a and my Qtek was still NO-SOUNDS :-(
I tried delete every RED notifications in check list, and I deleted every old notifications in this list in second time. I was delete this manually! After soft reset my QTEK 'again start talking '
here you have cab file for tring my solution
Click to expand...
Click to collapse
Great..........worked for me - I just deleted the red reminders twice (for some reason) and it started working again. Must be a corrupt remider or something.
Thanks for the pointers
Just some additional info for future reference.. I downloaded the CheckNotifications.CAB file (thanks for posting!) and removed all duplicates.. but still no reminders..
Eventually, I did the following, and I don't what fixed it but it may help others!
* Using CheckNotifications, deleted all duplicates
* Using CheckNotifications, deleted all references using Calendar.EXE
* Soft Reset
* Deleted Duplicates (again!)
Sync'd via ActiveSync, then whilst connected did the following:
* Removed ALL Calendar entries for the current month
* Entered a test notification
* Waited for the Notify to fire...
Success.
I think it was something to do with corrupt Calendar entry or some sort in my case; either way using the above fixed it for me, so may help someone else reading this in the future. (probably me, when it goes wrong 6 months down the line..!!)
Hello I have a M3100 (HTC HERMES) running Windows Mobile 6 Pro
Specs:
CE OS 5.2.1413 (Build 17913.0.3.0)
I really can't understand why every 4/5 days or (maybe) after having installed some program (like spb shell) my notifications for SMS and e-mails disappears.
(1) I tried to look in Settings/Sounds but everything looks fine.
(2) In the registry under the ControlPanel folder the keys look to be ok.
When I receive and SMS or an e-mail I only get the writing "1 Message to read" (or similar) with no sound nor popup nor vibration....
Is there a way to control this notification system? How does it work?
It's really frustrating because I continuosly have to look at the today tab to see if I got a message... grrrr.
The only solution I found to this problem was to hard reset the device
You probably need pmclean, available for free here:
http://www.pocketmax.net/redial.html
Hope it helps.
With a brandnew HTC 3470 aka Pharos, I'm facing a Problem, that regardless in which way I'm sending an sms, an error-message pop's up.
This message say's " The receiver is NOT known, sending anyway ?"
This happens
1. when I'm replying a received sms
2. when I use contacts
3. when I send it manually in all kind of formats
Nevertheless, the sms is sent. Just this error-msg drives me crazy.
Anybody an idea ?
cheers
cimber
PS : I'm using outlook 2002, maybe a compatiblity problem with WM 6
hmmm, i thought about this one a bit.
but the only thing i can think of is disabling the "confirm received" or something to that effect ( i have the dutch version so i dont know what the english version would be)
go to sms (tap it) then to menu, extra,then tap on the sms /mms to change the settings of that account. then uncheck the topmost box. (the one that says confirmation of receipt or something to that effect)
i dont know if that would solve your problem, so keep me posted please.
Thanks for your thoughts ! But no change at all. I think I'll have to make a hardreset and add one prog. after the other. Let's see what it will bring.
Regards
cimber
it's NOT comming from outlook 2000
avathar behemoth said:
hmmm, i thought about this one a bit.
but the only thing i can think of is disabling the "confirm received" or something to that effect ( i have the dutch version so i dont know what the english version would be)
go to sms (tap it) then to menu, extra,then tap on the sms /mms to change the settings of that account. then uncheck the topmost box. (the one that says confirmation of receipt or something to that effect)
i dont know if that would solve your problem, so keep me posted please.
Click to expand...
Click to collapse
Now I've made hardreset and installed "contacts" only via "active sync" and everything works fine. But after installing all my progs with sprite backup, same story again.So I'll install now prog by prog in order to find out, which prog creates this bloody error.
Regards
cimber
ah so one of the progs that are in the backup causes the errors..
very strange that if you import your contact via activesync it works....and if you restore form backup it gos down the drain ....maybe its a setting that imported as well through sprite??!!??
dunno
Problem solved
Reason for this strange behavior was a program called "Batti 2.1".
This Program only shows a barline indicating the battery status.
With the version 2.2 the problem is solved.
Best regards
cimber
hell there.