Database Users

vpn client?

hey guys,
am trying to connect to my office's VPN with my vario II. the default software provided does not seem sufficient. for one, i have one of those security key ring things which means my password changes every time i want to connect.
my pc uses cisco's vpn client...
any ideas? right now i'm just synching my exchange server with my pda using activesync, but wouldnt' midn having it on the go! there's no "external" access as such for the exchange server - it does have a web front end but its highly customized and isn't as easy as just configuring it as an external data source on my pda...

This one works perfect for me..
http://www.ncp.de/english/download/testsoftware/index.html

We use AnthaVPN at my university and it's supposed to work quite well with Cisco concentrator gateways, but be warned, if you have the latest 3.3 aku, you might run into problems like I did regarding loosing 3g internet connectivity on your hermes. However it could have just been a fluke as I didn't bother trying a fresh install of antha after a hard reset or anything since 3g is just as fast as my universities wireless internet anyways
Hope this helps

You can also try Bluefire. They have a 30 day fully functional trial version.
Find out more Here

Applestar said:
http://www.ncp.de/english/download/testsoftware/index.html
Click to expand...
Click to collapse
I have installed this but can't see any way of configuring the VPN connection. How did you configure it?

You have to use the PC client in order to create a configuration file and then transfer the file to your device

duh!
thanks!

bluefire is amazing. i bought it.

I came close to getting bluefire to work on our Cisco network... But once connected it would not transfer data.
I read on a seperate post here that alledgely the medianet unlimited plan uses the wap.cingular access point. That point is NAT based and some vpn clients do not like that... So they refuse the connection based on changing ip addresses.
I am not a networking expert so I do not know if this is in fact the case.
I do know I tried every freakin setting for bluefile and could not get a vpn tunnel from my phone to our Cisco vpn... So I gave up!

NCP
Could I get more specific infos about bluefire? They wanted a 5 page survey before they would send me a (business) trial.
Well, NCP Secure Entry VPN Client works perfect for me with Lancom and other standard firewalls. And yes, configuration is made with a Win XP Desktop Application. Nice about this: They got a Desktop VPN client as well which will be configured exactly the same way. So if you got a working setting for your Laptop you can manually copy the settings and they will work on the PPC as well - thats what I did.

i've looked everywhere, seriously. -remote desktop

any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!

ok i got it going.
first go to the computer you want to connect to and go to control panel / system
click on remote, enable remote users
go to start menu, run. type cmd
in command write "ipconfig /all"
take note of your ip address
on your phone go to remote desktop,
computer = your ip address
username = (go to startmenu, control panel, user accounts) use one of those names.
password = blank unless you have a password.
domain = i left blank.
connect full color unless it doesnt work for you
if you can connect and you get a password error
type the error you get inot google and you should get a fix as your first link.
try that.
blam, remote desktop, it's awesome.

Nice how-to...
this is the most succinct tutorial on how to do this that I've seen. I'm still having trouble, though. I get the "Cannot connect. Likely reason are: 1 the remote comupter is not set up for this. 2. Reached the maximum number of connections. 3. A network error occurred while connecting."
I have set up the XP PC, & taken down all firewalls. I only have one user account and it has a password. I've even tried using Hamachi with one of their VPN ip addresses (awesome and free for pc2pc). I 've combed trhough my router settings too, and tried to clear everything there, too. I can RD from an XP laptop, so ti seems to be something on the unit, to me. I've also setup file sharing w/ Total Commander (it's served my purposes amply).
I really have googled & googled & googled. If anyone has any idea what is going on, I'd be grateful for some ideas.

Have you enabled the RDP on the host computer?
Right click my computer
Properties
Remote
Then enable allow user to connect remotely.

Will only work on XP Pro, or Vista if you choose to allow older clients which they scaremonger you against by saying it's less secure.

Danke!
I've been scared away from Vista for the usual "new" OS reasons, but perhaps it's getting to be time for me to haul my old conservative back-end into the modern world.
Thanks so much for taking the time!
(and to Biohead: yes, I followed the instructions I lauded so vehemently.... ???)

you're running vista?
and you haven't been able to connect still, right?
sorry i could walk you through xp, but man vista sucks, i wouldn't touch it with a 10 foot pole.

i'm setting up remote desktop on my iphone
hahaha totally referred to this guide

and it sucks, so i'm sticking with vnc
man, i miss my exec/universal

dutchschultz said:
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
Click to expand...
Click to collapse
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524

orb3000 said:
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
Click to expand...
Click to collapse
you, my friend, are awesome

A possible solution for those of us on T-Mobile's standard web n walk
Sorry to resurrect this thread, but I thought I'd post my experiences here in case anyone else (like me) searches for a solution to enabling RDP on T-Mobile (UK at least).
I was having the same problem with remote desktop, it saying that the server was not available. I phoned up T-Mobile's helpdesk as recommended here and after getting past first line support (who didn't know what remote desktop was, and tried sending new connection settings to my phone to resolve the issue) I got through to someone who knew what they were talking about. Turns out that I'm on T-Mobile's "basic" or "handset-only" web-n-walk package, and it's not possible to use RDP on this. I assume they block the relevant ports. They told me that I could pay an extra fiver a month to upgrade to a version of web-n-walk which can handle RDP.
Well I told them I would think about it, but instead tried to find a way around it as the one or two times I need to use RDP are certainly not worth a fiver a month. My solution is probably only suitable for the more techy of us, but without much work and with no prior experience I managed to set up a SSH tunnel using FreeSSHd as a server running on my windows server (although a normal windows box should work fine - http://www.freesshd.com/) and zaTunnel as a client on my phone (http://www.zatelnet.com/zatunnel/main.php). Both programs are free.
Basically my phone takes all RDP connections and tunnels them over SSH to my windows server, which then turns them back into RDP connections. T-Mobile have no idea I'm using RDP, and if they block the SSH port in the future I can always change FreeSSHd to run on port 80 (for web). This will also work for other protocols T-Mobile might be blocking (FTP springs to mind).
Just thought I'd post this in case anyone was in my situation of needing RDP on their standard web'n'walk.
Edit Sorry posted this in the wrong thread! Will leave this post up however just in case someone finds it useful

echolock
Many thanks for the above have been searching everywhere for a fix to this. I am the same as you T Mobile (UK) and can't connect.
Could you give some additional advice as how you got the RDP to work.
For the record I can connect by Wi-Fi and by using a PAYG sim from a different carrier. However, I am on a contract with T Mobile and don't want to carry a different sim just to use the RDP.
I have installed both apps. I can make a connection from zaTunnel on Port SSH:24 to the freeSSHD server (SSH - listening on port 24). Other than adding a User and changing the default port to 24 there are no other changes I have made in freeSSHD.
Under the connections tab in zaTunnel I have left Network: Automatic with the other settings relevant to make a connection.
Under the ports tab of zaTunnel I have
LP> 3389,
IP/URL . IP of the desktop I want to connect to of 192.168.1.10
>RP 3389
When I the start the Remote Desktop app under my Windows Mobile 6.1 it indicates connecting the fails as before.
Also forgot to mention freeSSHD is running on the desktop I want to connect to.

Sure thing.
When you run Remote Desktop under Windows Mobile, make sure you connect to "localhost" NOT to the IP of the desktop you want to connect to.
Your other settings seem correct to me.
To attempt to explain a little, basically what happens is as follows. For simplicity's sake I will have three machines, your phone, your SSH server and your RDP server (although the latter two can be the same).
On your phone:
1) Remote Desktop connects to localhost on port 3389.
2) zaTunnel is listening on localhost on port 3389. It echos all commands sent to this port out on port 22 over your cellular connection to your SSH server, also providing details of your RDP server and port.
On your SSH server:
3) FreeSSHd receives the commands sent over port 22 and is told by zaTunnel to convert them to commands sent to your RDP server using port 3389.
On your RDP server:
4) Remote Desktop receives a normal RDP request over the normal port from your SSH server.
5) Responses are sent to your SSH server.
On your SSH server:
6) FreeSSHd receives the RDP responses, and sends them back to your phone over port 22.
On your phone:
7) zaTunnel converts the commands sent over port 22 back into RDP commands sent over port 3389.
8) Remote desktop receives a response from zaTunnel and thinks it's connected directly to an RDP server on localhost. In actuality it's connected to your RDP server using an SSH tunnel provided by zaTunnel and FreeSSHd.
Hope this makes sense, I'm not very good at explaining this!

Ah found another problem. The IP of your desktop you say is 192.168.1.10 - this is a local IP address so will only work on your local network.
Go to a website like http://whatismyipaddress.com/ from the machine you run SSHd on to find out what your current "external" IP address is. Bear in mind that most home broadband connections have a "dynamic" address which is allocated to you and might change from time to time - you can always use something like http://www.dyndns.com/services/dns/dyndns/ to set yourself up with a static hostname, and run a program on your machine which updates your hostname with the correct IP address every time it changes. Some routers have this functionality built in.

Thanks for the quick response and explanation.
Between posting and reading your reply I had worked out the RDP app needs the localhost or the IP 127.0.0.1.
I had come back here to post, so others would know in future.
Your other point you raised about the desktop IP. I have used this only in the ports tab on zaTunnel. The connection tab has a proper mydomainname.com address. (Provides email and a webmail interface).
Anyway, can connect now and thank you again in solving this for me. (If your in Leeds I will buy you a beer).

Ah yeah the 192.* address would work on the ports tab, fair enough. Might be worth pointing out if others read this that this is only the case if the machine you're trying to RDP to is on the same local network (or the same machine) as the machine you have FreeSSHd running on.
But good to hear you got it working Now hopefully T-Mobile won't cotton-on and decide to block port 22 too...

newbie remote desktop user

hello everyone, im a newbie to remote desktop and want to setup my u1000 to conect to my workstaion via wifi and internet as well. i just recently upgraded my u1000s rom ap3.
i could realy use your help pros..
u guys can also direct me to some link to useful info on settngs..
or any other replacement for remote desktop..
im sorry if thess silly questions doesnt needed a thread...
but i desperatly need the settings, as buy u1000 was one of my main praioriities
pls do help me frnds...
thanx in advance..

im no pro but i have it working here!
First off,to use it over the internet you need to make some adjustments on the pc end unless you have a static ip.
got to somewhere like no-ip.com register and d/l the software so you have a way of naming your dynamic ip.
Then you need to ensure that the allow remote connections is enabled on the pc and that your routers ports are forwarded if they need to be(mine did).
Then you should be able to enter the name of your ip (from no-ip.com) and password to logn from the rdp program on your dopod!
It should be similar over wifi on a LAN but instead of the no-ip name you just enter the computer name and password.
Forgive my terrible explanation of the setup but i can never quite explain myself properly.
Their are loads of tutorials on the net for setting up rdp and other tunnelling software like vnc.

have you tried ... ??
Sorry if this doesn't answer your question. However, I wonder if this might help. Check out www.logmein.com. I use it to connect with my desktop and it's free. You can remote adjust the settings to 640x480 and it works well -- even at 800 x 600. It's free!! (you can pay to upgrade to different features, but I never have.)
You might also look at orb.com. I can't get the video streaming to work well at all, but you can (also) connect with files on your computer and download them to your athena. It's also free.
As far as vpn tunneling, I haven't had much luck getting it to work. There's a company called hotspotvpn. Their service is cheap and works great with a regular laptop. They advertise compatibility with windows mobile, but I could never get it to work. I'd love to know if anyone else was able to do vpn tunneling and how.
Hope this helps somehow.

1.) goto www.whatismyipaddress.com that will tell you what your ip address is
2.) if you have a router you need to find out (follow me) you desktop ip not the ip address that the website gave you but the ip address your router gives you.... (you can find this by going to start --> run --> type in cmd hit ok --> then type this in with no quotes "ipconfig /all" hit enter it should be somthing like 192.168.1.1XX or 192.168.0.1XX
3.) goto start menu right --> click on my computer --> click on properties --> click on the remote tab --> half way down click the box under remote desktop
4.) goto router and tell it to open port 3390 to your local ip found in part 2
5.) open rdp on pda and type in ip from part 1

irus said:
4.) goto router and tell it to open port 3390 to your local ip found in part 2
Click to expand...
Click to collapse
I believe the correct port for RDP is 3389
PDAMerlin

thanx 2 al of u for ur solutions. i will tryout all the options and let u guys know..
i have edge on my phone and edge at my offce too, i guess this kind of network would be not be bad for rdp work...

PDAMerlin said:
I believe the correct port for RDP is 3389
PDAMerlin
Click to expand...
Click to collapse
your right, i have two computers i got

Remote desktop

Hi,
I'd like to connect my X1 to my office (Vista PC). I've downloaded WM6 Remote Desktop. I've entered Compouter adress with port, user name and pass, but when i want to connect I've the message 'Cannot connect. Likely reasons are : Specified computer name or IP does not exist or A network error occured while etablish the connection'.
In fact, the X1 does not open the connection in 3G.
Thanks for help
Fred
http://www.e-mmobilier.com

Iirc, remote desktop only works on Wifi. Though I can't tell for sure. Can anyone confirm?

Angelusz said:
Iirc, remote desktop only works on Wifi. Though I can't tell for sure. Can anyone confirm?
Click to expand...
Click to collapse
Remote desktop works on 3G and HSDPA too, but it won't connect on its own.
You have to activate the "Data Connection" (for example via CommManager) before starting the Remote Destop app.

Actually Remote Desktop will only work on 3G and HSDPA if the 3389 port is not filtered by your carrier.
In my case...only the http (80) ,smtp (25), imap (143) and pop3 (110) ports are not filtered...

You will probably need to set your router up to forward the port to your vista pc.
I have RDP setup and can connect by connecting to my routers external ip (or you can set up a dyndns account and go to the domain name like I did)
You just specify the vista pc ip (if it has a static ip) in your router config and direct all incoming RDP requests to the specified ip.

I tried and forwarded 3389 from my router to my pc to which I tried to connect. It worked indeed. Slow as hell (too slow to work with), but proof of concept.

Angelusz said:
I tried and forwarded 3389 from my router to my pc to which I tried to connect. It worked indeed. Slow as hell (too slow to work with), but proof of concept.
Click to expand...
Click to collapse
I use it over Vodafone HSDPA and it is quite useable. Not sure why you are having issues though.

rob_h said:
I use it over Vodafone HSDPA and it is quite useable. Not sure why you are having issues though.
Click to expand...
Click to collapse
Same here. Not slow or anything. Ok for viewing documents or performance graphs.
For first-time users I recommend, in order to get the best experience:
In "Options" set it to "High color (16bit)", "Full screen" and "Fit remote desktop to screen".
PS! I'm not sure how much more bandwith is used when setting it to use "High color", so if you don't have unlimited data plan or are not using wifi - watch your data counters.

Somehow it doesn't work for me. I'm connected over wifi, I set address, name, login .. it blinks .. and nothing happens. No error. Any idea ?

You have to open the rdp-port in the computers firewall too. And vista has be to setup for accepting rdp-connections.

i am no power user.. so i use logmein.. its easy !

[HOWTO] Use VPN with your Android & Home Router

This is a simple tutorial to allow you to connect to the internet using VPN through your home router.
:NOTE: At present, the steps here are sparse. They assume some technical capability to set things up yourself, this is just kindof a guide as to WHAT you'll need to setup.
Why, you ask? Security. Using a VPN will essentially encrypt your communications though a tunnel back to your home computer. Not going into all that here, basically a simple guide. I assume we're all smart here, so the basics.
Prerequisites
1. DD-WRT V24 Capable router. If you don't have this, then you will need to instead use a different method involving installing software on your PC that I won't cover here. The advantage of the DD-WRT router is ease of setup on the router, and not having to have your computer turned on.
2) Capable Android Phone & Provider. I can't troubleshoot your ROM or provider. Some Android Roms don't support VPN, and it's broken in some. Some providers apparently block it. If your Rom is good and your provider doesn't block it, you're golden. In some cases (such as on the G2X) custom kernels (such as Faux123's) will add the necessary TUN support. Or you may need to add a TUN.KO file if it doesn't... again, device specific, refer to appropriate device forums.
3) If you don't have a static IP (I assume you don't) you'll need a dynamic DNS provider compatible with DD-WRT. I prefer freedns.afraid.org, but you can use any o these: dyndns.org, zoneedit.com, No-Ip.com, 3322.org, easydns.com tzo.com or dynsip.org.
Got all that? Great!
Okay, here's the fun bit.
STEP 1
First, you need to hack your router. It's a LOT like rooting your Android phone. How to do it is BEYOND the scope of what I can write here, but what you need to do is visit http://www.dd-wrt.com and have a look around. Or, you can actually purchase routers with DD-WRT pre-installed. Basically you have to flash a custom ROM onto your router. It needs to support VPN, and be at least version "v24 SP1". Older versions may have a DIFFERENT VPN setup that's not as easy. Don't say I didn't warn you. I flashed the full-featured VOIP version to my router, a Buffalo WHR-G54S.
Unlocking (if necessary) and flashing your router with DD-WRT is a topic as broad as rooting/flashing Android - so I can't help you here. But once it is done, you are ready for....
STEP 2
Setup your dynamic DNS provider. I used http://freedns.afraid.org/ to do this. Basically you go to the site and sign up for the free "subdomain" services. You can pick a name that will be on a number of different domains, such as "us.to", where you could maybe pick something like "kick.us.to" if it isn't taken yet. All that matters is you remember the name.
Next, in DD-WRT, go to the Setup->DDNS tab and select the proper DDNS service and enter the information it asks for -- your service used, username, password and hostname usually. You can usually leave update interval at the default, and normally you don't need to use external IP check.
NOTE: You need to make sure you are not "Double NAT-ed".. this means two routers stacked is a nono. If you have a router connected to a cable/dsl router (instead of a cable/dsl modem), then it needs to be set to BRIDGE mode. Again.. complicated and really a topic best dealt with on its own.
Once you've setup your Dynamic DNS, you're well on your way. You can actually use that hostname for all sorts of things, such as always being able to get Audiogalaxy to connect to the right host without having to know a numeric IP that could change.
STEP 3
You're on a roll... Now, time to setup the VPN in the router. This is done under the Services->VPN tab. If that tab doesn't exist, then you got the wrong version of DD-WRT and need to go back to Step 1.
Enable PPTP Server, Broadcast Support, MPPE Encryption. Under Server IP enter your ROUTER's IP address (usually 192.168.1.1, or whatever you use to connect to your router). Under Client IP's, enter the range of clients on your local network in the format: 192.168.1.100-149 (where 100-149 represents possible IP addresses I've set in DD-WRT for my LAN)... this doesn't seem as important since we'll be connecting from outside.. Just do it.
Under CHAP-Secrets enter in your preferred username and password in the format:
username * password *
that is, the username, a space, *, a space, the password, a space and then *
Save and apply settings. (You need to click both SAVE and APPLY, DD-WRT is weird like this)
STEP 4
Back to Android! Yay! This part of the procedure may vary by phone, but this is how it is on my Gingerbread T-Mobile G2X with faux123's kernel.
Goto Settings->Wireless & Networks->VPN Settings->Add VPN->Add PPTP VPN
VPN Name=whatever you want
VPN server= your dynamic IP name you selected in Step 2
Enable encryption = Yes
now, hit Menu->Save
You should now see your VPN listed under VPNs. Click on it, and select CONNECT. Type in your username and password you selected at the end of Step 3.
It should connect. CONGRATULATIONS!
You should also have a notification in your taskbar that will now let you disconnect from the VPN.
STEP 5
Enjoy! .. wait, what? It didn't work? It did for me!!!
I guess.... ask questions here, or if it appears to be a phone issue, ask in your device's appropriate forum (and link to this thread so people know what guide you're following)
And, if anybody reading this is a better expert in setting this stuff up than I am, feel free to critique/laugh/criticize/constructively comment on this little howto and I'll correct anything I Rick Perry'd.

Nice tutorial! Would have been better if you also included more details in hacking our router

DroidVPN said:
Nice tutorial! Would have been better if you also included more details in hacking our router
Click to expand...
Click to collapse
I would have, but like I said, that's a topic as big as phone hacking itself. Every model of router is going to be different! There may be models that support VPN in the router as well without DD-WRT, but I'm not familiar with that setup.
DD-WRT's website has a pretty huge forum on what routers are compatible and how to set it all up.

The optimal speed can be achieved by the compression of traffic and by minimizing server loads. Web acceleration will enable you bring about a drastic improvement in the web page response time. This kind of acceleration usually come in lesser costs and offers the best web application performance.

So Wat does this do? Keeps u secured from the eyes of the ISP?.. harder for others to hack u?...
Sent from my HTC Desire using xda premium

evilgenius00 said:
So Wat does this do? Keeps u secured from the eyes of the ISP?.. harder for others to hack u?...
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
lotherius said:
Security. Using a VPN will essentially encrypt your communications though a tunnel back to your home computer.
Click to expand...
Click to collapse
Yeah, that.
...
10char.

Nice TUT, VPN working

Thanks. I mostly appreciated the idea of using afraid.org.
For some reason, Dyndns and no-ip wouldn't work with ICS as client.

thanks for this tut, keep it up

nice.. thanks for sharing

The cool thing is, once you start hacking your router, you open up all sorts of fun. Like using a virtual wireless network to bridge the open wifi network that gets 1 bar of signal in one little corner of your apartment to be a full strength WPA protected network with your own SSID and subnet that all of your devices can use ... not like I would do such a thing. Now, I *am* a bit afraid to try to set up a VPN on the bridged virtual network..... that could get complicated.

Will this also work with OpenDNS?
Already running DDWRT v24 on WRT600N, and trying to figure this VPN stuff to connect my Atrix running CM10. Thanks for any help

katinatez said:
Will this also work with OpenDNS?
Already running DDWRT v24 on WRT600N, and trying to figure this VPN stuff to connect my Atrix running CM10. Thanks for any help
Click to expand...
Click to collapse
Any service which gives you a stable hostname to the outside network should work.

If you have a higher end router that supports the mega builds (8MB flash), then you can opt for OpenVPN which is more secure than PPTP. Setup is more complicated though.

australix said:
If you have a higher end router that supports the mega builds (8MB flash), then you can opt for OpenVPN which is more secure than PPTP. Setup is more complicated though.
Click to expand...
Click to collapse
Still using a (now antiquated) Buffalo WHR-G54S which has 4MB flash and 16MB Ram... so while it has a lot of features, OpenVPN is lacking... so I can't test that method personally.
This Buffalo is the best router I've ever owned, though. I still can do without gigabit or N networking, so I'm not upgrading. I went through 5 or 6 bad routers (even a Linksys WRT-54G that crashed constantly) before I got this one.

Thanks for all the info here. I've deleted the post because I think my issue is with something else.
Thanks..
p

very...helpfull..!!!

Very easy guide! Thanks!

455
nice cool...

bumpin this because i have a question regarding this, i just set this up and it works great
there are mainly two types of auth vpn servers use, certificate authentication and username/password
i tried to set up password one, and you still need the server public certificate along with username/password, but you don't need client public and private keys unlike with cert auth.
now, i placed the server key, ca.crt, on my internal storage and together with username/password, works great, my concern is security of this file. this file needs to be accessible right, so you can't put it in /etc or /system, having it in internal storage, any app with storage permission can read it... isn't this a security risk? how is this solved? where do i put the file?
thanks
edit: also, how do i *prevent* network traffic without vpn? i know there is always on option and start on boot, but i did, and when the boot finnishes there is a brief moment when the phone connects on mobile network just before initializing vpn and in that brief moment android probably sends all sorts of passwords and data through the network ... how do i delay this until vpn is initialized?