Hi folks,
I just purchased a brand new QTek 2020i (It's not here yet; I just ordered it about 2 hours ago). The ROM is Spanish and I want to change it to a WWE version. I have a decent amount of experience upgrading ROMs/Modifying Extended ROM (since I also own a Universal). I'm able to read and understand most of the posts on this board. My question is this:
1) What is the problem with the camera that needed to be fixed (What did pug fix?)?
2) What WWE ROM version should I use? (I know this has been asked numerous times, but....) I'm curious because I saw that o2 has posted a ROM with BB support (version 1.11.171 I believe). Should I use this one? Is it buggy? Or, should I just grab the WWE version from the Qtek website? (I can't grab it now because I don't know the device's IMEI).
Thanks for everyone's help. The posts are extremely helpful. Looks like I need to upgrade the BT Stack for A2DP support.
Justin
It looks like I want to use Radio 1.04.
Update
First: I'd like to thank everyone's who posted most
(if not all) of this information. I'm not claiming
that I discovered any of it. Rather, I'm just trying
to post what I've found to "work". PUG and Ru Chonburi
(from pdamobiz.com) for all their help (i.e. their
posts). I hope the noobs find this information
useful. I found most of this information between
xda-developers and wiki.xda-developers.com.
Some simple modifications.
1) Registry Hack to get GPRS Button to work
a) To add a “Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
b) To add a “Disconnect” button and a timer display showing length of the GPRS session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
c) To disable both the “Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
Now when you are connected to GPRS and click on the bubble on the task bar, it
will show a disconnect button to disconnect and show duration. Or, you can
press and hold the red hang up button for a few seconds and it will disconnect as
well.
2) Goto \Windows\Startup and delete the file "CameraDetect". Otherwise, after
you perform a soft-reset whatever application you've mapped to the "Camera
Button" will be cleared and the button will activate the camera.
3) Unhide Extended ROM:
Tap \Windows\Loadvdisk.exe then you will find folder \Extended_Rom
But this folder will be disappear after a soft reset.
4) Upgrade BT. Update BT to add additional profiles (mainly a2dp). See
http://forum.xda-developers.com/download.php?id=11603
4a) ***UPDATE*** Once you've upgraded your BT stack, you may want to install an updated version of the BT Wizard. By default, Dial Up Networking (DUN) is NOT supported. If you want to utilize Dial Up Networking, please download the updated .dll here:
http://forum.xda-developers.com/download.php?id=4025
Copy the new .dll into the \Windows Directory and soft reset. You can use Dial-Up Networking (i.e. if you're trying to connect to a BT Modem (or a BT device (such as a laptop, cell phone or computer that has a DUN Profile))). I'm using it now and I haven't had any problems with it. BIG THANKS ASUKAL for the POST!
4b) Update two files so that AVRCP works properly within Windows Media Player 10. We need edit two files in the \Windows directory to get this work properly as well as apply a Registry Modification. The file names are:
landscape96.skn
portrait96.skn
You can either download the files I've posted or edit them yourself. Please use the following to properly edit these two files.
We need to edit these files in Notepad on our desktop/laptop computer, so copy these two files from your \Windows directory to your computer and rename them to _portrait96.skn and _landscape96.skn. Now open them in Notepad (make sure that “Word wrap” in Notepad is disabled). We need change two things.
First, find the line “PlayPauseStop”. To the right of the values 0, 0, 0 you will see some extra “stuff”. We need to delete everything to the right of 0,0,0 so that this line should look like all other button definitions.
Second, we need to rename “PlayPauseStop”. Change this so that it reads "PlayPause”. When you finished renaming it, make sure to re-align it so that it matches the other button definitions. Do this in both files (i.e. _portrait96.skn and _landscape96.skn).
Now that you’ve edited both files (or simply downloaded them), copy both back into the \Windows directory on your Alpine.
The last thing we need to do is modify the registry so that the Widcomm BT Drivers properly work with WMP 10. Go to the line in the registry:
[HKLM\SOFTWARE\Microsoft\Windows Media Player\Parameters]
We need to modify two lines.
First, modify the string value “DefaultLandscapeSkin” so that it points to the new files we just copied over (i.e. change it from ‘\Windows\widcommaudio.skn’ to ‘\Windows\_landscape96.skn’)
And secondly, modify the string value “DefaultPortraitSkin” so that it points to the new files we just copied over (i.e. change it from ‘\Windows\widcommaudio.skn’ to ‘\Windows\_portrait96.skn’)
Soft reset and you now have AVRCP on your Alpine! MANY THANKS TO tsd FOR THE TIP!
NOTE: If you start you a2dp session in landscape and then switch to portrait (or you start in portrait and then switch to landscape), your AVRCP controls will not work properly in the new screen orientation. To get AVRCP to work properly again you must either:
a) switch back to the original screen orientation when you started your a2dp session or
b) you must stop/disconnect your a2dp session and then restart it in the new screen orientation. When you do this, AVRCP will work properly again.
5) Stop the installation of o2 Active Interface by using corporate install code 0506
6) Disable "Receive all incoming beams". This mainly affect people who use a BT
GPS receiver. There have been some "connection" stability issues to the BT
GPS receiver (i.e. loss of signal) reported by some members. This will help
prevent that.
7) Audio Stuttering. After upgrading BT profiles (and adding a2dp from
step 4 above), users have reported that they experienced an audio stuttering
(via a2dp BT headphones) while playing games. This will fix that.
a) Changed a registry entry with resco registry editor.
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev.priority256
b) Click on the entry and change the DWORD Data entry from 256 to 128
c) Soft reset
8 ) Enter Bootloader Mode:
Power button + D-pad simultaneously +reset button with the stylus for 3 seconds
9) NOTE: DON'T UPGRADE THE RADIO IF YOU WANT TO USE BLACKBERRY! (You MUST use Radio 1.0)
RIM check the ROM version and RADIO version before they allow you to
connect to the relay. If it's not an approved mix, your device IMEI will be
BARRED from the relay.
10) MMS Setting for T-Mobile (My provider)
Go to Start/messaging/tools/MMS settings
settings for T-Mobile US:
Server Name: T-Mobile MMSC (or PictureMessaging )
Gateway:216.155.165.50
Port number:9201
Server Address:http://216.155.174.84/servlets/mms
Connect Via: My Work Network
Sending size Limitation: (I set it to max)
WAP Version: WAP 1.2
also:
Start/connections/connections/add new connection
name for connection: T-Mobile GPRS
Select Modem:Cellualr Line (GPRS)
Access point name: wap.voicestream.com
no user name or password or domain. click finish
Reboot
Send yourself a MMS message to initialize the system.
Extended ROM File Descriptions
Here's the files I used (and didn't use) when I cooked my ROM.
I utilized o2 ROMs, Qtek ROMs and imate ROMs to pull the various
cab files.
EXEC: \Extended_ROM\TPDisable.exe
Disables the touch screen - if you are customising your rom, DELETE THIS.
NOTE: If the cab files you add are "not designed for this version and may not
display correctly", it will halt the install process of all other files and you will
need to soft reset your 2i to continue, without being able to install any other cabs
onto your 2i.
CAB:\Extended_ROM\BA_cm_rm_map_o2_v3.CAB
O2 wap information.
DID NOT INSTALL
CAB:\Extended_ROM\BackpackDriver.sa.CAB
Driver for the backpack accessory that allows attachment of vga monitor etc.
CAB:\Extended_ROM\Caller_ID_Alpine_Generic_WWE_RC16.CAB
Caller I’D program.
CAB:\Extended_ROM\CV2.41.386_wwe.CAB
Clearvue PPT and acrobat reader.
DID NOT INSTALL (I have updated versions (i.e. 3.xxxx))
CAB:\Extended_ROM\Delete_shortcut.sa.CAB
Deletes shortcut to loadvdisk in the startup folder.
CAB:\Extended_ROM\Default_Enroller_enhance_1.CAB
Enroller Patch; Updates "Enroller.exe" under the \Windows Directory
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\SmartDialing_Alpine_Generic_WWE_RC13.CAB
Smart dialing and SMS auto fill from contacts, where you type the first few letters
of someone’s name.
CAB:\Extended_ROM\PhonePad_Alpine_Generic_WWE_RC11.CAB
Adds the nokia phonepad style input device for single handed operation.
CAB:\Extended_ROM\Default_Alpine_WIFI_v20302_05102005002.CAB
Updates WiFi Driver "tiacxwln.dll".
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\Broadcom_Corporation_Update.CAB
Updates BT Drivers (BtAvUI.dll, BtCeAvIf.dll, BtHidPlugIn.dll, BTRezAV.dll,
BTRezHID.dll, BtWizardAv.dll and BtWizardHID.dll) to support A2DP
CAB:\Extended_ROM\CAB-TaoJava-10.1.4.127-Alpine-O2Music-ENU-01Apr05-
MMP1051-v101.CAB
Installs Java music stuff.
DID NOT INSTALL; RATHER, INSTALLED
CAB:\Extended_ROM\Default_JMM101257_ENU_1004.CAB
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\BBConnect_HTC_PocketPC_BB_English_2.0.1.44-48.cab
Installs BB Client Connect
CAB:\Extended_ROM\O2UK_removeACCEPT_12212004.CAB
MMS program and templates.
DID NOT INSTALL; RATHER INSTALLED
CAB:\Extended_ROM\Default_ArcsoftMMS-2.0.0.22-AG-ENU.CAB
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\VideoMMSB22.sa.CAB
Video MMS addin.
CAB:\Extended_ROM\O2UK_PIE_homepage.sa.CAB
CAB:\Extended_ROM\O2UK_Regional_TimeZone.sa.CAB
CAB:\Extended_ROM\O2UK_RingTone.sa.CAB O2
DID NOT INSTALL
CAB:\Extended_ROM\Patch_Camera_9650.sa.CAB
DID NOT INSTALL (Makes Pictures Worse)
CAB:\Extended_ROM\Patch_Eraphone.sa.CAB (Updates audio driver (_wavedev.dll))
CAB:\Extended_ROM\Patch_Update_SIM_Mgr_2.2.1.0.sa.CAB
Leave these, they are not essential but make things work better.
CAB:\Extended_ROM\AlpineForTHBCarkit.sa.cab
A profile for "hands-free" communication if you have a THB Carkit.
DID NOT INSTALL (I don't have a THB)
CAB:\Extended_ROM\Alpine_SMS05272005.sa.CAB
SMS program.
CAB:\Extended_ROM\PressKey.sa.CAB
Updates registry with the following:
HKEY_LOCAL_MACHINE\ControlPanel\Phone
"Flags2"=dword:00000000
This removes the "GPRS Disconnect" Button from the GPRS Bubble
DID NOT INSTALL
CAB:\Extended_ROM\Alpine_UniDir_20051114001.sa.CAB
Updates driver: \Windows\AudioGW.dll
And updates the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Patch]
"UD-AudioGW"="1.00.02"
NOTE: THERE MAY BE A CONFLICT WITH THE NEW BROADCOMM
PATCH
DID NOT INSTALL
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\wap.CAB
O2 wap settings.
DID NOT INSTALL
CAB:\Extended_ROM\Certificate.CAB
Can be deleted - an O2 root certificate.
DID NOT INSTALL
CAB:\Extended_ROM\IPV4_132.sa.CAB
Wap push settings. Makes the following Registry change:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings
] "CacheTime"=dword:00000078
And some XML script
- <wap-provisioningdoc>
- <!--
Fix #17753, WAP Push to be activated
-->
- <characteristic type="BOOTSTRAP">
<parm name="NAME" value="" />
<parm name="PROVURL" value="" />
</characteristic>
- <characteristic type="PXLOGICAL">
<parm name="NAME" value="" />
<parm name="PROXY-ID" value="" />
- <!--
Proxy ID can be anything
-->
<parm name="TRUST" />
- <!--
TMO TEST SERVER SETTINGS a
-->
- <characteristic type="PXPHYSICAL">
<parm name="PHYSICAL-PROXY-ID" value="" />
<parm name="PXADDR" value="" />
<parm name="PXADDRTYPE" value="IPV4" />
<parm name="PUSHENABLED" value="" />
<parm name="TO-NAPID" value="" />
</characteristic>
</characteristic>
- <characteristic type="NAPDEF">
<parm name="NAPID" value="" />
<parm name="NAME" value="" />
<parm name="NAP-ADDRESS" value="" />
<parm name="BEARER" value="" />
</characteristic>
- <!--
End of Fix #17753, WAP Push to be activated
-->
- <!--
Fix #18923, Security settings not set up correctly
-->
- <characteristic type="SecurityPolicy">
<parm name="4108" value="0" />
<parm name="4109" value="64" />
<parm name="4110" value="64" />
<parm name="4107" value="3204" />
<parm name="4111" value="3732" />
<parm name="4119" value="132" />
<parm name="4120" value="16" />
</characteristic>
- <!--
End of Fix #18923, Security settings not set up correctly
-->
</wap-provisioningdoc>
CAB:\Extended_ROM\Default_KSE_Fax_v2.09_ENU_0720.CAB
KSE Fax Viewer
(Found on the iMate PDA2 ROM update)
CAB: \Extended_ROM\Default_Zip_Alpine_Generic_WWE_RC11.CAB
Zip Utility
(Found on the iMate PDA2 ROM update)
CAB:\Extended_ROM\O2BatteryInfo.CAB
Installs Battery Meters as a today plug-in (Thanks PUG)
CAB:\Extended_ROM\version.CAB
Sets the Extended rom version in device info.
EXEC:\Extended_ROM\TPEnable.exe
DELETE THIS AND TPDISABLE. Enables the touch screen.
Very important if TPDisable has been fired!
CAB:\Extended_ROM\v36024_install.ARM.CAB
I have removed this since I do not want the O2 settings
installed. If you remove this then you should bear in mind
that the device will not soft reset at the end of the
install ("RST: Reset" can achieve this though). You should
also bear in mind that the connection settings will almost
certainly need sorting out if this line is omitted.
DID NOT INSTALL - o2 Active UI installer
A useful log, thanks
Edits
I've updated my list above to talk about a solution for utilizing/installing the Dial-Up Network (DUN) profile onto the Alpine (an update to the BT Stack). See step 4a.
Also, I've noticed that when listening to music with WMP and my BT Stereo Headset, the music was REALLY choppy. I tried playing some music using TCPMP (The Core Pocket Media Player (freeware!)) and I had no problems. It was crystal clear! (It sounded better than my a2dp profile on my Universal). I'll test it out for a few days and report my findings.
Justin
thanks
Well I personally got a problem with TCPMP and bluetooth stereo headset. Sometimes (randomly) TCPMP terminate bluetooth connection so I have to restore that manually. That drives me crazy.
At the beginning I assumed that it's Wi-Fi interferense and so it is radio problem. But then I changed player to WMP and had absolutly no problem exept really MAD logic in making playlists :evil:
BTW WMP 10's sound on my Qtek 2020i and Jabra BT620 is superb :wink:
Thanks...
tsd,
Thanks for the information. Are you able to use all the AVRCP (spelling?) capabilities in WMP 10? I've heard that volume and the "next/previous" track buttons work, but not the "Play/Pause" button. Is this what you're experiencing?
I'm still getting a lot of "choppy-ness" using my GlobalSat Bluetooth Headset (BTH-820). I just ordered the iTech R35 to try.
Justin.
welcome
weatheryoko,
by default AVRCP does not work in WMP 10, but I have seen somewhere around here this instruction:
The buttons do not work because BtCeAvIf.dll contains some tricky code to control WMP. It looks for the skin file to parse it for the button positions and then send messages to WMP window. But the place in registry and the skin files themselves changes from wmp 9. So we need to fix both.
The idea is to make new skin files and force widcomm code to use them. WMP 10 should use the new ones of course.
Look in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Skins] în your device
There must be several string variables, we need “DefaultPortraitSkin” and “DefaultLandscapeSkin”, there the paths to skin files, portrait192.skn and landscape192.skn (or 96 for non VGA devices)
Find the files in \\Windows folder and copy them on PC. Rename them in e.g. _portrait192.skn
and _landscape192.skn
Then open them in notepad (turn word wrap off in it).
Find “PlayPauseStop” and delete all in and later columns (remove everything after 0,0,0). This line should look like all other buttons defininitions. Rename “PlayPauseStop” in “PlayPause” and align all.
Copy the new renamed files back to device.
Create new registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Media Player\Parameters]
“DefaultLandscapeSkin”=”\\Windows\\_landscape192.skn”
“DefaultPortraitSkin”=”\\Windows\\_portrait192.skn”
MANY MANY THANKS
tsd,
Thanks for the AWESOME tip. It works great! I've updated my post to reflect this (I've also uploaded the _landscape96.skn and _portrait96.skn to make it easier for noobs to use).
I've found out some interesting things about why my a2dp profile is skipping/stuttering A LOT. It looks like my GlobalSat BTH-820 are a poor choice for BT a2dp. I'm listening to a2dp on my iTech s35 (not the R35 which is being shipped to me this week), and I'm not having any problems at all. My advice to noobs or people looking to buy a headset that supports a2dp - ask fellow members for their recommendations for a good quality headset. I'll post my thoughts when my r35 headset arrives.
Justin
thanks weatheryoko n tsd
getting interesting....
Re: MANY MANY THANKS
weatheryoko said:
tsd,
Thanks for the AWESOME tip.
Click to expand...
Click to collapse
You're welcome. But it's not my text, it was found on this forum. So, thanks for the forum :lol:
Need help
@ Weatheryoko:
Hello, would you like to upload these files (only these files please) coz i interested to install it, but i have difficulties ti extract from i-mate & qtek ROM because i can't download those ROM. Why coz i we have extra slow connection... I have to wait about 30 minutes to download 5Mb files.
Thanks before...
I would ask for:
Default_Enroller_enhance_1.CAB
Default_Alpine_WIFI_v20302_05102005002.CAB
Default_ArcsoftMMS-2.0.0.22-AG-ENU.CAB
Here are the files....
cornelis,
sorry for the delay. I've uploaded the files you asked for. Go to:
ftp://xda:[email protected]
Then go to the "Uploads" directory, then the "Alpine" directory and then to the "Extended ROMs" directory and finally to the "iMate" directory. You'll find the files that you need there. Please just "copy and paste" (i.e. do not delete the files).
To any of the Moderators,
Can you move the files/directories I uploaded to a "permanent" section in the Alpine Directory (So they don't get deleted). Thanks.
Justin
Big thank you from me
@ Weatheryoko:
Thank you a lot.......
it's so helpful...
Related
Hi,
ok, this is most probably the most simple, stupid, unfinished piece of software you have ever seen. I agree. On the other hand, it should do what it is originally meant for. Setup a VOIP configuration on a Smartphone running WM6 without having to play with XML files and stuff.
So, this release, which is not even Beta or Alpha (whatever may be before that) does the job to load a VOIP config based on what you type in. It works on my HTC S620, should work on any VOIP enabled WM6 Smartphone.
For the coding curious, It's being coded (far from being finished) in pure C, without any Framework and MS developers suites. Only freeware stuff is being used for this development.
You'll see menu entries that will bring up only message boxes. Functions are not yet implemented but I'm working on it.
Once you typed in your configuration, press the key linked to "Save" (Left key), this will copy your config to the phone. A Messagebox will tell you the result of the operation and application will exit.
The config you typed in is saved as _setup.xml as well in the \Temp folder.
A file named Voipiser.cfg is saved as well in the \Temp folder, just forget about it atm.
Please, please, take this as hobby development. This is my first Smartphone app and I release it before being fully finished & tested only because I think it could be nice, if it works for you as well, to have it as soon as possible.
View attachment 38358
Hi to Shaun who is developing a much nicer version for PPC.
Cheers,
Ka.
This sounds interesting. I would definitely give it a try.
Doesn't work under wm6 t-mobile rom on dash
Good job!
Hi Kast,
i tried enabling VoIP Support on my HTC S710 by using your small app. As long as i let the example values untouched everything works fine and the app tells me, that the settings were succesfully saved. But when i type in the configvalues of my sipaccount, it says "XML Input malformed" when pressing "Safe". I think the problem is something about the proxyname. If i type in the values but let the proxyfield untouched, the app saves the settings...
Any suggestions here?
Greetz,
Fussel
Doesn't work under wm6 t-mobile rom on dash
Click to expand...
Click to collapse
Uhm, strange, developed it originally and tested on TMo Dash WM6... Would you mind giving me details of the way it crashes?
I think the problem is something about the proxyname.
Click to expand...
Click to collapse
You could send me the proxy name and I'll try to debug it with it.
Thanks all,
Ka.
Fussel1979 said:
Hi Kast,
i tried enabling VoIP Support on my HTC S710 by using your small app. As long as i let the example values untouched everything works fine and the app tells me, that the settings were succesfully saved. But when i type in the configvalues of my sipaccount, it says "XML Input malformed" when pressing "Safe". I think the problem is something about the proxyname. If i type in the values but let the proxyfield untouched, the app saves the settings...
Any suggestions here?
Greetz,
Fussel
Click to expand...
Click to collapse
Just put http:// in front of the proxy server adress and it will save it!
good luck
Hello, i had an "unknown error" when i save config
Hi gregdu13250,
mind telling me what phone you have and the provider you use?
Thanks,
Ka.
I have a s710 htc and the SIP¨provider is Ippi
Hi. Here is all errors which are done by KaSt VoIpiser program in a _setup.xml file.
Code:
1:<wap-provisioningdoc>
2: <characteristic type="VoIP">
3: <parm name="SIPSettings"
[COLOR=Red] 4:[/COLOR] value="<provision key='1232ab01' name='Sipnet'[COLOR=Red]>[/COLOR]
5: <provider name='Sipnet' />
6: <user account='1234567' password='7654321'
[COLOR=Red] 7:[/COLOR] uri='[COLOR=Red]sip:[/COLOR][email protected]'
8: allowedauth='digest'/>
[COLOR=Red]9:[/COLOR] <sipsrv addr='sipnet.ru[COLOR=Red]:5060[/COLOR]' protocol='UDP' role='proxy'>
10: <session party='First' type='pc2pc' />
11: <session party='First' type='pc2ph' />
12: </sipsrv>[COLOR=Red]
13:[/COLOR] <sipsrv addr='sipnet.ru[COLOR=Red]:5060[/COLOR]' protocol='UDP' role='registrar'/>
14: </provision>" />
15: </characteristic>
16: </wap-provisioningdoc>
-------------------------------------------------------------------------
1: <wap-provisioningdoc>
2: <characteristic type= "VoIP">
3: <parm name="SIPSettings"
[COLOR=Red] 4:[/COLOR] value="<provision key='1232ab01' name='Sipnet'[COLOR=Red]>[/COLOR]
5: <provider name='Sipnet' />
6: <user account='1234567' password='7654321'
[COLOR=Red] 7:[/COLOR] uri='[email protected]'
8: allowedauth='digest'/>
[COLOR=Red]9:[/COLOR] <sipsrv addr='sipnet.ru' protocol='UDP' role='proxy'>
10: <session party='First' type='pc2pc' />
11: <session party='First' type='pc2ph' />
12: </sipsrv>
13: <sipsrv addr='sipnet.ru' protocol='UDP' role='registrar'/>
14: </provision>" />
15:</characteristic>
16:</wap-provisioningdoc>
Upper is a genuine _setup.xml file, and lower is a file generated by KaSt VoIpiser program.
I think it it will be easy to correct.
Hi,
thanks for spotting the errors houser21! Great help!
Just one thing... I can't stick 5060 in the config as not all of the proxies are using that port. I know at least one using 5061. Prefer that the user specifies the port when different than 5060 or just by always entering proxyort.
Actually made this tool to ease the setup of the provider I use normally, which accepts the syntax the way it is. Prolly not all of them are so "open".
Will post tomorrow a new version with the changes you highlighted.
Thanks again,
Ka.
I downloaded you're program and everything looks really nice but...
I cant seem to get it working when i config it for voipbuster.
The idea is to set it that if there is Wlan available that the call goes through the internet, is this possible with this program and if so what do i do wrong ??
domain name is missin
Hello Kast
it seems one parameter is missing in the CAB file - the domain name.
the VOIP provider supplied me with 4 parameters:
user anem
password
SIP IP address
domain name.
where so i put the domain name in your application ?
this should fo into the URI field in the setup.xml file
thanks.
Kast, your program works great but I still cant get VoIP to work at all on the S620, calls still go over mobile even when connected to wifi and s620 shows internet calling available. Is there anothe cab file you used to get VoIP working ?
Thanks.
kast said:
Hi,
ok, this is most probably the most simple, stupid, unfinished piece of software you have ever seen. I agree. On the other hand, it should do what it is originally meant for. Setup a VOIP configuration on a Smartphone running WM6 without having to play with XML files and stuff.
So, this release, which is not even Beta or Alpha (whatever may be before that) does the job to load a VOIP config based on what you type in. It works on my HTC S620, should work on any VOIP enabled WM6 Smartphone.
For the coding curious, It's being coded (far from being finished) in pure C, without any Framework and MS developers suites. Only freeware stuff is being used for this development.
You'll see menu entries that will bring up only message boxes. Functions are not yet implemented but I'm working on it.
Once you typed in your configuration, press the key linked to "Save" (Left key), this will copy your config to the phone. A Messagebox will tell you the result of the operation and application will exit.
The config you typed in is saved as _setup.xml as well in the \Temp folder.
A file named Voipiser.cfg is saved as well in the \Temp folder, just forget about it atm.
Please, please, take this as hobby development. This is my first Smartphone app and I release it before being fully finished & tested only because I think it could be nice, if it works for you as well, to have it as soon as possible.
View attachment 38358
Hi to Shaun who is developing a much nicer version for PPC.
Cheers,
Ka.
Click to expand...
Click to collapse
tjmvdz said:
Just put http:// in front of the proxy server adress and it will save it!
good luck
Click to expand...
Click to collapse
I think it doesn't need the http://, when I add the http://, My Voip doesn't work. My phone cann't register and make call.
Blackjack II SGH-i617
Thanks for the effort, though when trying to use this program to save a config, all it does is say unknown error.
Has anyone got a smartphone voip config program working at all?
Here you will find a little tool to change your Device's Bluetooth name without going to the registry yourself.
http://gbit.ath.cx
It's free and more apps will be released.
Thanks. This is exactly the type of thing I could use.
Would it be possible to make a program to toggle on/off the "Wireless Stereo" and/or "Hands Free" services for a particular Bluetooth device automatically.
I created the attached Mortscript file to do it, but it is very slow and cumbersome. I use this to allow me to switch from my Plantronics headset to my JVC radio when I am in my car. The SendKeys("Settings","2") line in the mortscript code is used to pick the headset named 260Plantronics in my bluetooth devices list. I thought you could make it use a parameter to pass the device name to the program, so any device may be chosen. I use the registry reading part of Battery Status to show me if the headset service is enabled or not.
The registry keys for the devices is under HKLM\Software\Microsoft\Bluetooth\Device\???????????\Services\????????\enabled, where the first set of ?s is the device and the second set of ?s is the service. I tried changing the registry keys with mortscript but it doesn't affect the actual settings in the setting menu and the Plantronics is still connected. Even after a soft reset the Plantronics will still be connected even though the registry keys show 0 and the settings items are unchecked.
Code:
iscar=RegRead("HKLM","\Software\Microsoft\Bluetooth\Device\000389c44266\Services\0000111e-0000-1000-8000-00805f9b34fb\","enabled")
Run("\Windows\Start Menu\Programs\Tools\BlueSet.lnk")
WaitFor("Settings",10)
SendKeys("Settings","2")
Sleep(500)
SendCR("Settings")
Sleep(500)
MouseClick("Settings",17,109)
MouseClick("Settings",17,127)
Sleep(500)
MouseClick("Settings",195,308)
Sleep(500)
Close("Settings")
Exit
installation folder
i have eten glofiish m700 with WM6.1
i installed the CAB & it created a new folder on the main memory called \pogram files%provider% with the BlueName folder inside it
i believe it should have created the BlueName folder inside the original main program files folder, so i did a copy & paste of the BlueName there
It works fine & nice & light software..does exactly what it should do ... but i wanted to mention the "folder" destination error to you
Thanks again for the nice cab
ok, thanks i will check the installation and upp a correct one.
elkneo said:
ok, thanks i will check the installation and upp a correct one.
Click to expand...
Click to collapse
great
please update us here & post something to let us know that the new one is there so we go get it
again good work
corrected version is online now. visit my page for more software...
Thanks for the update.
Hi ,
URL http://gbit.ath.cx is not working . I was looking for the solution to change the bluetooth radio name . any ideas ?
anil_k_22 said:
Hi ,
URL http://gbit.ath.cx is not working . I was looking for the solution to change the bluetooth radio name . any ideas ?
Click to expand...
Click to collapse
Here you go.
I hope he doesn't mind me posting his cab here since his site seems to be down.
Check out Smart Mobile Tools for a free tool to automatically start an application when a configured bluetooth device is discovered.
Features:
Starts an application on bluetooth device discovery
Easy Bluetooth device selection
Optional application start arguments
Low power consumption (no background service running)
Test option using the test button
2 search modes; on a timed event or on wake up (power button pressed)
Usage examples:
Start you GPS navigaton software when GPS mouse is switched on
Start Activesync when PC bluetooth device is discovered
Start your own application at Bluetooth device discovery
22/2/09: version 1.0.1 released solving issue with program arguments
23/8/11: version 2.0.0 released (finally), change list:
Widcomm Bluetooth stack support!
Support for up to 5 different profiles; check for different devices
Improved UI
Interval config issue fixed
please let me now your feedback or make a small donation via
Smart Mobile Tools kind regards,
Paul
Mod Edit : 2nd Post Deleted, please keep the discussion in a single Post
This is a nice app. I have one key idea for you to add to this that would make a bunch of users very happy:
The issue is that when using a stereo blue tooth device, one has to always manually activate it to make the stereo connection work.
All that is needed is to detect that the device being connect has stereo capability and force that connection to activate correctly. I have to do this manually either via A2DP toggle or HTC BT Quicklink - a royal pain.
Thanks,
Barry
Bluetooth Stereo Connection
bsw11 said:
This is a nice app. I have one key idea for you to add to this that would make a bunch of users very happy:
The issue is that when using a stereo blue tooth device, one has to always manually activate it to make the stereo connection work.
All that is needed is to detect that the device being connect has stereo capability and force that connection to activate correctly. I have to do this manually either via A2DP toggle or HTC BT Quicklink - a royal pain.
Thanks,
Barry
Click to expand...
Click to collapse
Phone: HTC Touch Elfin
Headset: Motorola S9 HD
MP3 Player: S2P by A_C
Whenever i turn on my headset, it automatically fires up my mp3 player in stereo mode. And when i turn off my headset, the player also quits.
Never had a problem with it,
I suggest you check your settings.
You could use this app to run teksoft's A2DP toggle.
Surur
All I'm getting is:
BlueStarter.exe
ArgumentNullException
An error message cannot be displayed because an optional resource assembly containing it cannot be found
at ObjectCollection.Add()
at BlueStarter.BlueStarter..ctor()
at BlueStarter.Program.Main()
justDave said:
All I'm getting is:
BlueStarter.exe
ArgumentNullException
An error message cannot be displayed because an optional resource assembly containing it cannot be found
at ObjectCollection.Add()
at BlueStarter.BlueStarter..ctor()
at BlueStarter.Program.Main()
Click to expand...
Click to collapse
Looks like the 'settings.ini' configuration file is corrupt try to delete this file.
www.smartmobiletools.com
paulwal said:
Looks like the 'settings.ini' configuration file is corrupt try to delete this file.
www.smartmobiletools.com
Click to expand...
Click to collapse
Where would I find this settings.ini? It's not in the program directory.
justDave said:
Where would I find this settings.ini? It's not in the program directory.
Click to expand...
Click to collapse
It should be located in the root of your device
bsw11 said:
This is a nice app. I have one key idea for you to add to this that would make a bunch of users very happy:
The issue is that when using a stereo blue tooth device, one has to always manually activate it to make the stereo connection work.
All that is needed is to detect that the device being connect has stereo capability and force that connection to activate correctly. I have to do this manually either via A2DP toggle or HTC BT Quicklink - a royal pain.
Thanks,
Barry
Click to expand...
Click to collapse
+1, would like this as well. had to press a button on my o2 a2dp to have it stereo
paulwal said:
It should be located in the root of your device
Click to expand...
Click to collapse
Nothing there, so I tried putting an empty file there. I got a different error so you could be on the right track. Or maybe it just errored out earlier.
Any other ideas?
BTW, putting a file called settings.ini in the root directory isn't a great idea anyway.
Touch Pro
Anyone know what the command line is to Toggle Bluetooth on or off in the presence of a know BT device? Right now I run the phone with BT turned off and have to remember to turn it on when I get in my car.
justDave said:
Nothing there, so I tried putting an empty file there. I got a different error so you could be on the right track. Or maybe it just errored out earlier.
Any other ideas?
BTW, putting a file called settings.ini in the root directory isn't a great idea anyway.
Click to expand...
Click to collapse
An settings.ini should be created when you start BlueStarter, press Save and then Exit, the file should then look like:
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<!--ini file-->
<AppSettings>
<add Name="Program" Value="" />
<add Name="DeviceName" Value="empty" />
<add Name="ProgramArgument" Value="" />
</AppSettings>
You are right for version 1.1 this settings.ini file would be moved.
paulwal said:
An settings.ini should be created when you start BlueStarter, press Save and then Exit, the file should then look like:
...
You are right for version 1.1 this settings.ini file would be moved.
Click to expand...
Click to collapse
I just tried creating that file with the contents you suggested and I'm back to the original error. It looks like the error happens after the settings file is read.
How do I set this up to automatically sync via bluetooth once in range of my PC?
How do i get this to automatically connect with bluetooth over activesync to a device?
also
How do I get this to auto connect as a hand free head set for headset?
smotrs said:
Anyone know what the command line is to Toggle Bluetooth on or off in the presence of a know BT device? Right now I run the phone with BT turned off and have to remember to turn it on when I get in my car.
Click to expand...
Click to collapse
How is your phone supposed to know it's in the presence of a known BT device if bluetooth is turned off ?!? DOH!
NRGZ28 said:
How is your phone supposed to know it's in the presence of a known BT device if bluetooth is turned off ?!? DOH!
Click to expand...
Click to collapse
Beats me, that's why I was asking, the description sounded vague so I wasn't entirely sure what it could or couldn't do.
Hi!
Take a look at WifiLocations at http://forum.xda-developers.com/showthread.php?t=448783&page=2.
It is able to switch on/off different things depending on the radio broadcasting cell you are in. So you could switch on Wifi when arriving at home or switch Bluetooth on when leavin home ....
This one in combination with Blustarter should do the trick ....
Greetz Bax
PS: haven't tried WifiLocation up to now, so don't beat me if it doesn't work...
.HaVoC. said:
How do I set this up to automatically sync via bluetooth once in range of my PC?
Click to expand...
Click to collapse
the activesync application you should configure is \\windows\\repllog.exe
I found the following parameters:
/remote which appears just to start the Activesync application and
brings it to the foreground
/remote /all which starts the Activesync application, brings it to the
foreground and starts synchronising
/remote /all /h which starts the Activesync application and starts
synchronising without bringing it to the foreground
www.smartmobiletools.com
** Don't ask/pm me for files or where to d/l **
Since someone PM me for iGO 8 config, I just share my exp & config in case anyone find it useful.
**TTS is very sensitive to Virtual Memory. (Please noted it's not the available memory you see at Settings > memory. So you may see 90mb+ available memory there but still not able to get TTS) and resource at IGO "startup" time (but doesn't matter after it started and working).
1. Make sure the rom use the slots wisely and give you enough VM (22mb+), U should ask your cook for detail.
2. Make sure you don't have **** load of craps at startup (/Windows/startup. HKLM/init, HKEY_CURRENT_USER\Software\HTC\BootLauncher, etc)
3. Make a full backup and disable unnecessary services/devices with Dotfred task manager. Personally, I don't need USSD, IPV6, Ipsec, ...etc)
4. Soft-reset maybe a good idea if you already run X1 for a long time.
5. "No Today Plugin" w/ AE Button Plus is very handy to deactivate/activate TF3D and free up some resource. There are mortscript to automate this in some thread.
My Steps:
1. optional: start BT and connect your A2DP audio system (JVC BT-1 in my case) in case you want the TTS and phone call goes to yr audio system.
2. run Igo8
3. After Igo8 is started and TTS is working. Minimize Igo8 by "End Call" button. Then start your fav music program (Core Player 1.24 in my case).
4. run Igo8 again to bring up iGO8 from minimize. And my music play (Play/pause/FF/RW) is controlled by AVRCP
My current config: X1i/a running my custom 3.2Full ML rom
iGO8: 8.3.2.90500(PNA version, the ONLY version works for both PDA contact and TTS).
Skin: Trimmed (since I don't need squared screen suppport) & modified (laneinfo_signpost.ini for bigger freeway sign post) v10 from LZF.
My sys.txt
Code:
[project]
;No need the name for the latest version
;name="igo8_pda"
;name="ui_igo8"
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
mapfontscale=250
recalc_voice=0
;uncomment for PDA version
;Skin="ui_igo8"
[rawdisplay]
highres=0
[poi]
enable_pois_before_080217=1
;multipoi=1
[debug]
skip_eula=1
enable_roadshadow=1
sound_q_length=250
show_device_type=0
show_rawdisplay_info=0
enable_3D_buildings=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_gps_pos=1
showcenter=1
show_speed_limit=1
show_icons=1
show_arrows_on_route=1
follow_gps=1
earth=1
autosave=0
[device]
type="ALIAS_XPERIA"
[tts]
;tts_buffer=65536 ; this could be important for preventing voice interruption
priority="HIGH"
Thanks for sharing this, I can do it myself but I'm sure it helps a lot of people.
However I'm concerned about the eprformance, so here are two suggestions:
1) set this
Code:
enable_3D_buildings=0
instead of enable_3D_buildings=1 , to disable 3d buildings since it's slow.
2) use speedbooster 2.0, and increase the priority of iGo8.exe . It seems to load maps and search faster and the interface drawing is smoother.
More on performance here: http://forum.xda-developers.com/showthread.php?t=503250
Need some help
Hi i have install igo8 in my xperia but when i open the file it stated
Fated error
Initialization error: no voice files were found.
Can someone pls guide me Thx
guys what about german devices ? its not %SDCARD% i got SPEICHERKARTE/IGO8
is this true config ?
after this i changed, my device is starting IGO8 for the first time, but after it breaks imidiantley up.. like an error !
THE START SCREEN APPEARS AND I GOT ON THE RIGHT UNDER CORNER INIT API MSG !
somebody knows some more ? or could help me ?
Very nice iGo8 config. Thanks for that.
Btw is there any way to keep the current map zoom when locating my GPS position. I mean when I scroll and zoom, and than I want to find my current GPS position, click on the button for that, I loose my current zoom, and go to a much lower one, where I can't see the streets.
Anyone any idea?
Funshion said:
Hi i have install igo8 in my xperia but when i open the file it stated
Fated error
Initialization error: no voice files were found.
Can someone pls guide me Thx
Click to expand...
Click to collapse
check in Igo/IGO8/CONTENT/LANG if you have any files in there.
jackleung said:
** Don't ask/pm me for files or where to d/l **
Since someone PM me for iGO 8 config, I just share my exp & config in case anyone find it useful.
**TTS is very sensitive to available ram (70mb+) and resource at IGO "startup" time (but doesn't matter after it started and working). Soft-reset maybe a good idea if you already run X1 for a long time. Make sure you don't have **** load of craps at startup. "No Today Plugin" w/ AE Button Plus is very handy to deactivate/activate TF3D and free 15-20mb ram.
1. optional: start BT and connect your A2DP audio system (JVC BT-1 in my case) in case you want the TTS and phone call goes to yr audio system.
2. run Igo8
3. After Igo8 is started and TTS is working. Minimize Igo8 by "End Call" button. Then start your fav music program (Core Player 1.24 in my case).
4. run Igo8 again to bring up iGO8 from minimize. And my music play (Play/pause/FF/RW) is controlled by AVRCP
My current config: X1i/a running my custom 3.2Full ML rom
iGO8: 8.3.2.80621 (PNA version), and the EXE of v8.3.2.73871 (PDA version) on the same directory just for import Outlook contacts addresses for PNA version.
Skin: Trimmed (since I don't need squared screen suppport) & modified (laneinfo_signpost.ini for bigger freeway sign post) v10 from LZF.
Click to expand...
Click to collapse
Can you please tell me what you did to make the signposts bigger?
On my device (Touch pro 2) the signposts are about 3/4 of the screen and I just cannot find any solution to make them smaller!
Bright.Light said:
Can you please tell me what you did to make the signposts bigger?
On my device (Touch pro 2) the signposts are about 3/4 of the screen and I just cannot find any solution to make them smaller!
Click to expand...
Click to collapse
I change to signpost_font_size=30. U can play around w/ the padding setting as well
Great post, these settings fixed things for me and gave me some ideas - thanks
I'll start this thread to share my knowledge aquired after many hours of testing regarding the registry settings of Microsoft Voice Command on Topaz with WM6.5 ROM from HTC although the settings may be applicable to other cooked ROM's and phone models.
First of all, I don't know why but different versions of MSVC are installed with different registry settings so I will only talk of the final result. These characters "" do not need to be completed.
Here comes the tricky part. To make MSVC work you need to alter the following registry settings:
HKLM\Software\OEM\VoiceCommand
Type: String
"Path" = "\Windows\VoiceCmd.exe"
HKCU\ControlPanel\SoundCategories\Ring
Type: Dword
(BE CAREFUL HERE, IF IT'S A STRING, YOU NEED TO FIRST DELETE THE STRING AND CREATE A DWORD WITH THE FOLLOWING VALUES)
"AttenuationCategory" = "2" (it's the setting I'm using)
(This value can be changed. It tells how much the ringtone is reduced for the voice to be heard)
The rest of the values here do not need to be altered.
Next is:
HKCU\ControlPanel\SoundCategories\VoiceCommand1
Type: Dword
(SAME HERE, IF IT'S A STRING, YOU NEED TO FIRST DELETE THE STRING AND CREATE A DWORD WITH THE FOLLOWING VALUES)
"AttenuationCategory" = "5" (it's the setting I'm using)
(This value can be changed. It tells how loud the voice in call announcements can be 1 TO 5 1=low 5=high)
The rest of the values here do not need to be altered.
Make sure that the following location's are set to:
HKCU\ControlPanel\Sounds\RingTone0
Type:String
"Category" = "Ring"
and:
HKCU\ControlPanel\Sounds\TTSAnnounce
Type:String
"Category" = "VoiceCommand1"
Type: String
"Sound" = "\Application Data\Volatile\\TTSCallerID.wav
The rest of the values here do not need to be altered.
Do not forget to set your MSVC to announce incoming calls and to announce notifications using Bluetooth hands free if available.
If you want to assign the long call button from the phone to launch MSVC without a third party software then assign it from the personal folder in settings then edit the following registry key:
HKLM\Software\Microsoft\Shell\Keys\40C6
Type: String
"" = "\windows\voicecmd.exe\" (THE LAST SLASH IS CRITICAL, SO USE IT)
Leave the rest the way they are.
This are the settings for which dll should be used to initiate bluetooth communication: BTAGTEXT.DLL , VCBTHAG.DLL (it's installed by MSVC and this is the one you should use) and OEMAGW.DLL.
You should have something like this:
ex:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Type: String
"BTAGExtModule" = "\windows\vcbthag.dll"
If you want to use your wired headset to launch your MSVC then you need to long press the hang up button.
This setting were tested on the updated WM6.5 ROM from HTC website with MSVC version 1.6.21040 which works perfectly and 1.6.21725 which also works fine except for bluetooth voice command initialization from hands-free which does not work because I don't know why this version of MSVC closes the communication between phone and hands-free.
And last you should set you phone to not use single volume, if you do, the volume of the voice will be reduced with the ringtone, if you set them separately the voice will be spoken out loud even if you reduce the ringtone volume or system volume.
I hope this helps most of you out there who are desperatly trying to use MSVC and don't know how to set it to work the way it was supposed to.
P.S. For those who are trying to get the WWE eastern european 6.5 ROM (ex. Hungaria, Romania, etc), you can get it from HTC selecting in the country selection Ceska Republic. I don't know why but seems that other countries are not updated in the ROM section.
Hi,
I will add this to the MS Voice configger app i have set up.
Thanks for this!
You're welcome
It was my pleasure, I'm glad that someone will be able to use it and not to go through the same hardship as I did.
Dword v.s. String
HKCU\ControlPanel\Sounds\TTSAnnounce
Type: Dword
"Category" = "VoiceCommand1"
In the HKCU key you mentoned above, My type in the phone showed a string, not Dword. And it seems I can't add new Dword "string" after deleting the string type.
Anything I missed?
Sorry, my mistake, I will edit it, it should be a string there.
Hi guys,
For the longest time after I upgraded my ROM, MSVC has stopped making incoming caller announcements. Everything else works, it just wouldn't make call announcement when a call comes in. Not on speaker, not on BT. I tried everything and it still didn't work.
I came across this thread and I tweaked the registry. As soon as I changed
HKCU\ControlPanel\Sounds\RingTone0\Category from "VoiceCommand1" to "Ring", then incoming call announcement worked for me!!
So i was pretty happy about it, except it only worked for a few days. The last couple days it's stopped working again.
Taking a closer look at the registry I realize what I have is identical to what's posted here, except for -
HKCY/Control Panel/Sounds/TTSAnnounce/Sound
Instead of "\Application data\Volatile\\TTSCallerID.wav" I have "\Internal Storage\Backup and Restore\Application data\Volatile\\TTSCallerID.wav"
I guess it's a case where my ROM moves all volatile files from main memory to internal storage (like a SD card ... I use TouchDiamond1 which uses internal storage instead of SD card).
When I look at that folder, a TTSCallerID.wav file IS indeed generated everytime I make a call to my phone! It is just for whatever reason it fails to play that file!!
Has anybody experienced this? Can anyone help?
Voice Command Problem
Do you use some tweaking programs which could move the temporary folders from the main memory to the storage card or a custom rom which could be tweaked that way? As long as I now, you cannot move the location in which voice command writes his voice file as it is generated within the program.
Strange enough, call announce works after I made the following changes:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
Change from "VoiceCommand1" to "Ring"
That's different from what's reported on the 1st post, but it seems to work for my phone .... ??!?!
As for moving the volatile folder to internal storage ... it's a feature of my ROM (DiaDuit 1.6.7) ... the ROM automatically does that, even if I put files inside \Application\Volatile\ it moves them to the storage automatically. But everything seems to work fine, including MSVC after I made the above registry tweaks ... so I guess that wasn't the culprit.
Hi,
So I update the config app to version 1.2.
The above mentioned registry fix was already in the config app.
Last post for Topaz test:
http://forum.xda-developers.com/showpost.php?p=5485644&postcount=44
Can someone make a cab of this. thanks
Cab file
shayan.k said:
Can someone make a cab of this. thanks
Click to expand...
Click to collapse
It seems someone already has, check the link above