Can anybody help with backlight problem? - JASJAR, XDA Exec, MDA Pro General

I am on a trip and had my Universal stuck at startup and had to hardreset. Restored everything with SPB backup and all is working great besides the backlight. Whatever interval I put it just goes back to 10 seconds.
Can anybody tell me which is the setting in registry to try to fix it in that way?
Using latest iMate rom...
Thnx

Yup same thing with me, backlight switches off after a few seconds no matter what the settings. Wonder what is going on? Any solution? Thanks.
Cheers.

Is it possible that I am asking impossible? Pls, can some1 help with this?
Pls!

You can find the registry key to change the backlight duration here in the WiKi: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
I use PHM Registry Editor. Make sure after changing the registry, leave your device ON for a minute then perform the soft reset for the change to take effect.

Related

Cleartype in landscape mode reg hack problem

I did the usual reg hack hklm/system/gdi/cleartypesettings/0 switched off phone to reset & it works for a few times but then it reverts back to normal on its own accord. Checked the reg setting & it shows 1 again. Any ideas, because its driving me mad having to change it again & again.
I use Orange SPV M3100 & PHM Regedit
zen123 said:
I did the usual reg hack hklm/system/gdi/cleartypesettings/0 switched off phone to reset & it works for a few times but then it reverts back to normal on its own accord. Checked the reg setting & it shows 1 again. Any ideas, because its driving me mad having to change it again & again.
I use Orange SPV M3100 & PHM Regedit
Click to expand...
Click to collapse
same with me - when i change OffOnRotation setting to 0, reset device, then it works. but after another reset it reverts again.
Try Twkcl.exe
http://forum.xda-developers.com/viewtopic.php?t=15688
Maybe the solution, it works for my Tytn:
Make the registery change as described for the wizard.
Go to landscape (keyboard slided out) en go to start, settings, system, Screen, General (must be landscape), ClearType, enable ClearType.
Then: make a softreset not using youre stylus but trough the On/Of button, or Softreset trough other possibilties.
After a couple of resets it still works till now! Just testing right now the stylus reset: result: [email protected], so that is really the problem. Using the stylus hole softreset (what's the name for it? Resetbutton for stylus?).
So again procedure as descriped above en never use the resetbutton for stylus anymore until somebody discoverd a solution for it!
Has someone did the trick allready?
I'm going to try such trick, thanks..
I think that's an HTC issue, because it happens also on Qtek 9090...
On Motorola MPx I changed reg value one time and it always worked across lots of soft resets.
Rougenator said:
Make the registery change as described for the wizard.
Go to landscape (keyboard slided out) en go to start, settings, system, Screen, General (must be landscape), ClearType, enable ClearType.
Then: make a softreset not using youre stylus but trough the On/Of button, or Softreset trough other possibilties.
After a couple of resets it still works till now! Just testing right now the stylus reset: result: [email protected], so that is really the problem. Using the stylus hole softreset (what's the name for it? Resetbutton for stylus?).
Click to expand...
Click to collapse
i never use 'resetbutton', but always resetting device with on/off button. even with that, cleartype in landscape mode seems to be lost after couple of resets (or maybe, offs/ons).
Can anyone confirm whether or not Twkcl.exe works?
Cheers, Joe
joehood said:
Can anyone confirm whether or not Twkcl.exe works?
Cheers, Joe
Click to expand...
Click to collapse
Twkcl.exe works for me.
Rougenator said:
Maybe the solution, it works for my Tytn:
Make the registery change as described for the wizard.
Go to landscape (keyboard slided out) en go to start, settings, system, Screen, General (must be landscape), ClearType, enable ClearType.
Then: make a softreset not using youre stylus but trough the On/Of button, or Softreset trough other possibilties.
After a couple of resets it still works till now! Just testing right now the stylus reset: result: [email protected], so that is really the problem. Using the stylus hole softreset (what's the name for it? Resetbutton for stylus?).
So again procedure as descriped above en never use the resetbutton for stylus anymore until somebody discoverd a solution for it!
Has someone did the trick allready?
Click to expand...
Click to collapse
I tried it but after two or three soft resets cleartype in landscape rollbacks to off...
nicolochi said:
I tried it but after two or three soft resets cleartype in landscape rollbacks to off...
Click to expand...
Click to collapse
At least you did get it to work. I have no luck with this method at all.
As I mentioned before, Twkcl.exe works well for me. Maybe you wanna try that and forget about tweaking the registry.
I think I know ur problem, try closing the reg editor from memory running programs screen before you reset. That worked for me, but am going to try twkcl now to get it to stay.
that's odd... I followed the instructions for TwkCL but it makes no difference, the reg setting goes back to normal after the 2nd reset.
I physically copied TwkCL.exe to the extended_rom, then edited the config file, that's all I need to do right?
Nothing happened so I edited the registry as normal and it just went back as usual.
Hope someone can help,
Cheers.
joehood said:
that's odd... I followed the instructions for TwkCL but it makes no difference, the reg setting goes back to normal after the 2nd reset.
I physically copied TwkCL.exe to the extended_rom, then edited the config file, that's all I need to do right?
Nothing happened so I edited the registry as normal and it just went back as usual.
Hope someone can help,
Cheers.
Click to expand...
Click to collapse
No need such complication....simply copy Twkcl.exe into the \Windows\Startup folder will do.
I believe the instruction is for effecting automated configuration during hard-reset so that Twkcl.exe will be copied to your STARTUP folder after each hard-reset.
Marvellous.
Thanks!

Brightness Changes After Soft Reset

Maybe I missed the fix under the Wiki section or maybe nobody has complained, but I want the screen brightness to resume the level that I set it at, after a soft reset.
Can anybody help with a registry tweak or an idea? Thanks

Disable New SMS Auto Wake Up and Turn On Screen?

Hi,
I've owned the Xperia for a week and it's a great WinMo device. However unlike Touch Pro or Diamond, there's no registry tweak available to turn off the auto wake up on new sms feature.
I found it really annoying. Everytime a new SMS arrived when the phone was in my pocket the screen automatically turned on, and as I was walking my jeans' pocket continuously "touched" on the phone screen and accidentally opened bunches of programs and scroll up and down until it hanged.
It will be perfect to just make sound + vibrate, but keep the screen off, as I could do on Touch Pro.
Anyone knows of such a solution please do help!
I need to bump on that...
hmmmmmmmmmmmmmm
aint advanced config 3.3 working for that?
I was having this problem too... the only thing I changed to attempt to fix this was instead of pressing the power button to sleep the phone before I put it into my pocket, I press and hold the end key so that it locks the phone and dims the screen. The screen eventually turns off and it requires you to unlock the phone when you power it back on. When you receive an SMS or Email, the screen still lights up, but you have to press unlock, then tap unlock to start using it.
Yes, I have the same problem too and hope we can have the option to turn it off so that the screen will not lighted up when there is new sms or call.
Can someone work on this?
The registry key used for the tweak that works on Touch Pro does not exist, which is HKLM\Drivers\BuiltIn\RIL
smaberg said:
aint advanced config 3.3 working for that?
Click to expand...
Click to collapse
That option is for Touch Diamond and Touch Pro only, and it does not show on Xperia when you use Advanced Config. It's obviously related to the registry key mentioned above.
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Has anyone tried this out to see if it works...???
Cheers
SE-Naz said:
Has anyone tried this out to see if it works...???
Cheers
Click to expand...
Click to collapse
I have tried it myself and it works, I don't have to worry that I might press anything on the screen when there is incoming SMS.
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
SE-Naz said:
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
Click to expand...
Click to collapse
Not sure about yours but I do not have this key so I have to create a new one and it is working.
I need to create it...
Does it need to be where the
HKCR
HKCU
HKLM
are???
Cheers
Sorted now and working well...
Thanks again
Put it in HKLM.
However Resco registry give me an error and doesn't create this dword. Very very strange...
chongbh said:
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Click to expand...
Click to collapse
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Just added this feature in my application XperiaTweak!
hutch said:
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Click to expand...
Click to collapse
Using your Registry Explorer an go to the below location :
Location in Registry : HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Select "New" D_Word and you will be asked to enter the details :
Top portion just enter : DisableSMSWakeUpEvent
and bottom portion just enter the value : 1
Save it and you should find the details there :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
For easier way, you can download the latest Xperia Tweak and it include the option to turn off the screen for any incoming sms.
http://forum.xda-developers.com/showthread.php?t=440035
Confirmed Work!
I can confirm this solution works perfectly! I thought if the value does not exist means the device does not support it. Thanks chongbh!

Auto Lock when backlight is off

I tried changing the value on touch 3G but it doesnt work, even after rebooting it, what gives?
Automatically lock --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
dont work on my htc jade
Anyone knows why? I don't want to install any software for the autolock. Changing registry seems to be the best fit for me. Anyone who can help? Many thanks.
Didn't work with me as well...
I was thinking maybe it has something to do with HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel\LockLevel being 0? Anybody tried changing this key to 1?
bump thread
Try CSDEVCTRL (search here in XDA) for your autolocking needs... Works like a charm!
You can try S2U2. This is a utility that will help you customize how to lock your phone while on battery and while on power.
It also allows you to set customized pictures as screensaver much like the ipod.
PM me for links

How to lock also the Hardwarebuttons with the Default Sliderlock

Hello,
How to lock also the Hardwarebuttons with the Default Sliderlock.
I don't want to use a other Sreenlock Program.
I just like to lock the Buttons also when the Screen is loecked.
any Solutions?
Thanks
Are the buttons active at all? During screen lock, I guess only the endcall button is active, waking up your phone.
alex fung ,
you are wrong.
All hard ware buttons except vol buttons can walk the phone/ turn on the screen.
ah you are right. They wake up the screen, but the touch panel is still locked. Try TouchLockPro.
any simple solution please, touch lock pro is soo confusing...
and is there is some solution to lock phone on backlight off, i mean dim is activated not locking when the screen goes off
tnx in advance
Hope this helps
To lock the hardware buttons with the phone in lock mode try modifing the registry.( it is simple but do this at you own risk)
Install a free registry explorer like PHM RegitEdit im sure you will find here it on this site (regedit.Mrln_ARM.cab ) Donate if you like
When installed open and navigate to: "HKEY_CURRENT_USER",Then "ControlPanel",Then highlight "Keybd".
Change "DefaultKeyLock" value data to "1"
Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work!
[/QUOTE] Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work![/QUOTE]
...that part is not mworking on my HTC LEO withh updated offical ROM WWE.
I changed the registry , restarted and still the screen dims but noit locking ..after siome seconds screen goes off. my idea was to have screen locked on dim and stays like this for about 30-40 secs and then to go off.
any suggestion pls.
tnx in advance
HKCU->Control->Keyboard->DefaultKeyLock=1
and
HKCU->ControlPanel->Backlight->AutoDeviceLockEnable=1
is all i need.
It works like i would like to have it.
Thank you.
Touch lock pro is a realy nice program and i appreciate his work, but to me it has to many features.
I've been after this answer for a little while now, and was pleased to find this thread. But... when I looked at my registry settings they were already as you suggest, but all of the buttons along the bottom of the phone still wake it up. Is there another step that I don't know about? (I have tried soft-reset).
I'm running SPB Mobile Shell - perhaps that's getting in the way?
I'll keep looking for a solution and post here is I find anything.
Anyone else have any more ideas?
Thats a shame it wont work for you,It may be spb mobile shell, Rom related or an old locking program you had installed.
Shot in the dark but have you tried changing the values back, soft reseting and then changing them forward again and soft reseting?
registry not working on my HTC LEO too..
dang.. registry doesn't work on my Leo too..
any other way to solve this??
Try soft reseting.
only open your registry editor and make changes then ,wait for 2-3 minutes ( wont matter if your device goes off )
(If off wake device up)Then soft reset again.
otherwise use a different reg editor or flash another rom.
N.B or just use this, it is small and cool:http://forum.xda-developers.com/showthread.php?t=505032
any recommended reg editor??
I never have a problem with PHM but resco is good.
http://www.resco.net/pocketpc/explorer/
Remember you will need to wait some time before windows stores the new settings properly. Soft reseting straight away probabley wont work.

Categories

Resources