Database Users

Bluetooth settings

Hi
I have discovered this site just now as a was searching for information on how to updrade by qtek9100 for a2dp and use a bluetooth stereoheadset with it.
I found some leads but they all ended in my not being allowed to change the registry settings for
"local machine"\drivers\BuiltIn\"
I can not add BuiltIn\BtA2dpSnd and therefore not conclude the setup.
Is there anyone who can give me some advice on how to go about this ?
I have updgraded to the latest official ROM for sweden.
Lars

Try the CAB file attached

You might have to unlock your phone before you try and change the registry settings.

lars_s_e said:
Hi
I have discovered this site just now as a was searching for information on how to updrade by qtek9100 for a2dp and use a bluetooth stereoheadset with it.
I found some leads but they all ended in my not being allowed to change the registry settings for
"local machine"\drivers\BuiltIn\"
I can not add BuiltIn\BtA2dpSnd and therefore not conclude the setup.
Is there anyone who can give me some advice on how to go about this ?
I have updgraded to the latest official ROM for sweden.
Lars
Click to expand...
Click to collapse
The cause for the problem may be one of the following:
1, you used a desktop ActiveSync-based registry editor.
Don't use desktop tools to chage the Registry. As is pointed out in my Registry Editor Bible, it won't work. Use a PPC-only registry editor.
2, you didn't shut down the PPC entirely after this (or waited long enough for the changes to be written to the Flash ROM as is explained in many of my WM5 & registry & flash ROM-related articles); this is why the changes haven't been stored.
Note that this has NOTHING to do with your phone's being locked. You do NOT need to unlock your device.

Hide SIM contacts on Touch Plus

Hi all,
My other half bought a Touch Plus yesterday and I've been adding software to it to make all that much better.
The contacts are stored on the SIM and I've copied them all into Pocket Outlook. I then made the reg tweak to hide the SIM contacts which worked immediately, hiding all the SIM contacts. However, when I soft reset the device (via software or holding down the power button and then re-powering on) the registry value goes back to what it was - showing the SIM contacts!
Is there any way that reg value can be kept to 0?
Cheers
ND

Hi
I have the exact same problem and asked this question previously here, never got a answer
http://forum.xda-developers.com/showthread.php?t=359152
The first thing after a reboot is to hide my SIM contacts... If anyone have a solution it would be very nice.
Kind Regards

I have found a solution...
Download dotfred's excellent TaskManager/Registry Editor from: http://www.dotfred.net/TaskMgr.htm
Copy the exe to wherever you want on your device,
Use the registry editor in there to set the ShowSIM value to 0.
Export that registry value... to \My Documents\HideSIMContacts.reg (for example)
Create a shortcut to the task manager exe in Windows\StartUp.
Edit the properties of that shortcut (I use Resco Explorer) and set the Target as follows:
"<path to task manager>" \My Documents\HideSIMContacts.reg /silent
Make sure you have "'s around the Task Manager path BUT NOT around the path for the reg file.
Reboot...
Bob's your uncle.

I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick

AWESOME...thanks, I have a locked rogers HTC Touch and have tried many different Reg tweaks that would not stick to hide the SIMs in my Contacts, but the NIKI Sim fix above finally got it. Thanks, thank you, thanx again.

nikisimfix
hello !!
Thank you very much for this soft

Thanks guys for the wonderful solution.. I was going bonkers having to delete and add in all my contacts everytime I factory set my Niki. Cheers..

Other solution is RilhasHideSIM, for more see: http://forum.xda-developers.com/showthread.php?t=467147

thanks gfreek this thing worked fine...

Thanks for sharing
Well done and thanks a lot for sharing!

gfreek said:
I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick
Click to expand...
Click to collapse
I downloaded and installed this but it didn't work. What did I do wrong??

tks,works well

XT9 Fix released on HTC asia :-D

Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!

can't find this, can you send the link?

this is fantastic!
what ROM are you using ? will this work with any ROM (and ROM language) ?
i would appreciate the link also!

here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!

oh my god it works !!!!
i cant believe how simple that was !!! thank you so much for the registry entry, i can use my phone to text again !!!

it's great!
this was the most anoying thing on my new dual.
tx a lot,
pirlone

Doesn't work for me
in fact it screws my device up!.. it shows the ABC being as the default input, but I can only type the first letter in each key, multiple presses just repeats the same letter
I guess I will have to reflash the OS.. otherwise I now cant use the text input on the keypad anymore!

works on mine. thanks, dtm for letting me know about this.

Maybe doesnt work on mine becos Im running the WM6.1 Nikki project OS ??
Anyone else that has installed this using this Version?

Can you help me? I am begiiner having Dual 2 days. XT9 is really anoying esp for NON english users.But I cannot fix it as it is described. Can you show me step by step what to do? Thanks

It does not work for me!
muzikfreakah said:
Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!
Click to expand...
Click to collapse
Please help me. I am a new user having Dual 2nd day. I was trying to install it but it does not work. Can you describe step by step for the beginner what to do? XT9 is realy anoying esp for NON english users.

Hi, just copy the cab to the phone and install it. Maybe you need to softreset your Niki. (open the battery case, the reset button is left to the USB connector).
Cheers
Michael

I love this and it is working well for me. My only issue is when using the touch keypad software, when you type it highlights the letters and take a few micro seconds to move to the next so if I am typing a sentence, and press space,it deletes that entire word or atleast the last few letters that I typed :-( So the only way to solve this is not text that fast or use the hardware keypad.

Wow I noticed so many people reposting this when this was posted a long time ago.
Anyway, just wanted to confirm this is working on my wifes elf also

Finally there's something to kill XT9

Change Mode from ABC to XT9 or XT9 to ABC.
Hey everyone!
First, I wanted to start out thanking muzikfreakah for the link to the .cab file and the posting the Registry path that needs to be modified. I used these as a base reference for the work I completed on my phone. Instead of wanting to go from XT9 to ABC, I wanted to change my phone from ABC to XT9.
Initially I used PHM Registry Editor to make the necessary change to the Registry value you noted. Shortly thereafter, I updated my ROM to WM 6.1 so I had to reapply the settings manually. This got me thinking. Why not just create a quick .cab file for myself, saving me time in the future. This is exactly what I did!
Attached are two .cab's I created a while back (just never got around to uploading them). The first .cab (SP_Default_ABC_To_XT9.cab) modifies the appropriate Registry Key, setting it to 1 (defaulting to XT9). The second .cab (SP_Default_XT9_To_ABC.cab) does just the opposite, changing the value to 0 (defaulting to ABC).
Final notes before I part -
File Sizes: The file size of each of my .cab's is 1.07 KB, as it only contains the necessary Registry Key change. The link muzikfreakah provided brings you to "HTC+Touch+Dual-default-ABC.cab". This file size is 20.76 KB, as it appears to use a more complex method of making the necessary Registry changes.​Company and Application Name: After my .cab is installed, it will display in the Installed Programs list as "Seth_Polley Default_XT9_To_ABC" (or vice versa depending on .cab used). After installing the other .cab (HTC+Touch+Dual-default-ABC.cab), the following is displayed in the Programs list: "Customization Customize_Tool".​
In summary, either file will work for changing from XT9 to ABC. While 20.76 KB is nothing by today's standards, you can go smaller yet by using my .cab's (about 1/20th of the file size). Additionally, my .cab's provide a more descriptive name in the Programs list. Pick your poison! To 'install' the Registry modification, simply move the .cab to your phone, execute it, and follow the prompts.
Feel free to PM me if you have difficulties accessing/downloading the files. If you are concerned about using my files, feel free to open the .cab (can use an application like WinRAR) and review the contained "_setup.xml" file to verify this .cab will only make the changes I noted above.
Best Regards,
Seth
[Verizon HTC Touch (xv6900), currently running WM 6.1]
-=-=-
muzikfreakah said:
here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!
Click to expand...
Click to collapse

Thanks ))

Thanx Man, I´ve searched this simple thing so long time...

Cheers Mate!!
I can now send SMS's again after unlocking!!
Simon

Registry Registration Settings? (Resco?)

For the longest time I've tried to get the information where Resco stores the registration codes in the Registry but never been able to find it. Contacted Resco and never received an answer.
In other words I've bought their product and have the code. But I dont want to enter it everytime I install a new Rom. I want to back up the registry setting without backing up the whole registry since ill be installing it over newer roms..
I've sucessfull found and backed up the keys for thumbcal and SPB Shell and TV. (just searched in the registry for my code and backed up those keys)
But Resco cant seem to work. Does anyone have any clue where those keys would be located under?
Thank you .

Forever022 said:
For the longest time I've tried to get the information where Resco stores the registration codes in the Registry but never been able to find it.
...
Does anyone have any clue where those keys would be located under?
Thank you .
Click to expand...
Click to collapse
I'm not sure what Resco software you're using, however, for Resco Explorer the registration information is in the file \Windows\wmtrigger.dat. I can only guess that other Resco registration information may also be in that file. I restore that file after every flash and have never had to enter my registration information in Resco Explorer after doing so.
Settings for Resco Explorer and Registry Editor are stored in the registry in several keys all within the
[HKEY_LOCAL_MACHINE\Software\Resco] branch.
Hope that helps -

Thanks.
That did the trick

Forever022 said:
For the longest time I've tried to get the information where Resco stores the registration codes in the Registry but never been able to find it. Contacted Resco and never received an answer.
In other words I've bought their product and have the code. But I dont want to enter it everytime I install a new Rom. I want to back up the registry setting without backing up the whole registry since ill be installing it over newer roms..
I've sucessfull found and backed up the keys for thumbcal and SPB Shell and TV. (just searched in the registry for my code and backed up those keys)
But Resco cant seem to work. Does anyone have any clue where those keys would be located under?
Thank you .
Click to expand...
Click to collapse
after you payment is successful, resco retailer will sent a email to you, it contains registry ID and password
remember, registry ID must matches to your phone ID
you can change phone ID by edit "my contact card" in contact list

i asked the same question a while ago at the resco forum and they developers said they can't release that info so they're apps aren't easily cracked/key'd/hacked etc... after searching like a mad man all over the registry, i couldn't find it so thanks adoute for pointing out \Windows\wmtrigger.dat!

wifi on in standby

Guys,
I'm new in this forum so I wish say hi to everybody...
Then, I have an HTC diamond 2 (original rom) I've searched for the topic in the forum and I found just a solution working in my phone.
http://forum.xda-developers.com/showthread.php?t=515808&page=3
I've downloaded the cab and everything is working fine, but, because on soft reset all the values return to the original one I'm forced to install the cab everytime, so it should be easier to create a button that is going to modify the following parameter in the registry:
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
Is it possible? There is someone helping me?
I have to keep on the wifi in order to use my voip...
Thanks in advance,
Markuz

You can export that registry key and just insttall the registry instead of the cab if the settings aren't sticking.