Database Users

How to add a standard part to a group of phone numbers?

Hi!
I'm thinking about using my M1000 with my company's Sim.
Problem is that to dial personal numbers I would need to add "46" before the number I am dialing (this is for cost control... the company pays for phone call of collegues and clients, I pay for my personal ones).
Now, I am afraid that due to this restriction I would not be able to tap a personal contact number and have it dialed and also that I would need to delete the whole number from the phone display in order to add the 46 at the beginning.
Is there any application that would allow me to easily add the 46 in front of personal numbers before they get dialed?
THANKS!!!
Chris

Are you saying that you can't simply add the "46" to your personal phone numbers in your Contacts list? I just added "46" in front of a number in my contacts list and dialed it. It did not work on my network, but it did dial it.

I could but...
I could add the 46 in front but...
0) do it for all of my contacts its a long work...
1) It would be difficoult to revert should I change sim
2) I would get all my contact screwed if I try for example to dial from my PC or share them with someone
3) I don't need the "46" for SMS... so if I put it for SMS they would not go...
4) Incoming calls would not be recognized becouse the caller Id could not match the caller with the 46...
So it would be best if I could just add the "46" with a botton to the end of a number I would like to dial, just before I dial it...
Thanks anyway!
Chris

Duplicate contacts in Call history; How to delete/fix them?

I found it very annyoing; so please someone help:
First of all: in call history; it alway sets to all calls; that means showing missed/incoming/outgoing everything; Even if you put filter to missed calls only; next time you open history; it again reverts back to All calls filter; So QUES IS: how do you make HTC remember call history filter which you set up earlier (like show call history only)
2ND QUES:
even dumbest fone of Moto's shows this; when you call xyz from your ph.book, and called again, its shows 1 entry in call history (not every time you call it), but in HTC it shows 10 entry if you try to call 1 number and it's busy or not connecting; so how do i get rid of these duplications?
Help appericiated; ques sounds dumb but i'm rookie using PPC 1st time in life

same issues as above is there a fix? also is there a way to save text messages or lock them?

Strange problem with SPV M3100

Hello everybody,
I have a strange problem with my PDA. I'm using WM6 Black Satin ROM. My contact list contains over 400 contacts (and over 500 phone numbers). Each phone number is saved in format +xx xxxxxxxxx, cause in that format it comes from Outlook. Most phone numbers have +48 as country prefix and 9 digits with phone number (cause in Poland cellular phone numbers have 9 digits). I have set Call Id match value to 9.
Everything worked fine, but from a few days i noticed, that some (about 10% of all) contacts are not recognizedy by phone when someone calls. PDA displays only phone number (the same which is stored in my contact list), but cannot find contact name. Similar - when SMS arrives, I can see only phone number, name is not recognized. When I open SMS and tap sender's phone number, PDA asks if he should store that number in contact list (that number is already there). Storing doesn't help - I tried to create new contact, store in existing.
I tried to delete problem contacts and recreate them - it helped in 2-3 contacts, rest still is not working properly. I tried to change Call ID match value - tried values between 3 and 12, doesn't change anything. In some cases, phone recognizes phone numbers after removing '+' from phone number, but without '+' I'm unable to make calls. I can remove whole '+48' (and phone recognition still works), but I need country prefix, cause I often have to make calls using roaming.
Please HELP !!!!!!!!!

Have you tried 0048 instead of +48 for the problem numbers? I noticed when my Hermes had its original WM5 ROM, some numbers were sometimes presented by the other mobile network as "07" instead of "+447", so I had that problem. I just had to make extra entries in my contacts lists...
It's not done that though for a long time now (I've changed ROMs a couple of times too), sorry I can't help more.

Thanx for replying. I tried to replace '+' with '00', but PDA still doesn't recognize that number. I think that in some cases '+' makes, that phone number cannot be found.
Maybe there is another setting in registry, which defines length of phone number compared to number from incoming call? I found this setting in HKCU\ControlPanel\Phone\CallIDMatch. It looks like sometimes PDA doesn't use that setting, cause my numers ale longer than 9 characters (usually 12 including '+'), and adding '+' as first character makes them unrecognizable.

Please please help - Caller ID/Incoming Call Prob

Guys,
I've posted this before but nobody has helped me yet.
Basically put I have a couple of contacts for which I have more than one contact number (home, Mobile etc..)
Anyway, when i receive a call from one of these contacts, the name is not resolved, the picture is not shown and the custom ringtone I have chosen (all by vanilla stock rom means) does not ring!!
I have seen this happen with "Exact" matches to contacts in my Contacts list and also if I have entered the number as "+447760....." instead of using the default "07760...." prefix for UK mobile numbers (as I'm abroad a lot so need to use that to dial them) it also refuses to recognise that they are in fact the same number - something my Artemis did without an issue.
Please help me resolve this - it's ruining my HD experience!
Thanks

21 views and no replies - come on guys please - going on a trip tomorrow and I need this to be sorted if poss - doing my head in!!

I had exactly the same problem on my X1, which I have now sold so I could get a HD. I was on o2 uk using itje's 5.061 rom. What network are you on and which rom and what software have you installed? maybe something we both installed is causing the problem

Right, I'm on a stock rom on an unbranded Touch HHD on the Vodafone network. Programs I've installed are as follows:
Changscreen,
HDTweak
Advanced Config
S K Tools
Battlog
Fingerkeyboard
Resco file Explorer
Very strange - it might have happened since I restored a backup but I doubt it.

Try reducing Phone>Call ID match number in Advanced Config.

I have similar problem... Just installed dutty 3.0X and when i sinchronized all my contacts become duplicated, so i deleted manual only the first ones. And now when someone from the contacts is ringing i dont get picture or his name and I am sure that i have the same number in the contact list. Odd

Anyone have any other ideas about this? Still causing me some considerable pain - I seem to recall it started after I started to reconcile the outlook contacts with my PC - this may have caused a different contact ID (or something?)

same problem and no solutoin... :-(

i managed to fix this by reassigning the phone numbers to the contacts page. It seems to occur when you use 3rd party contact management apps before you have assigned numbers.
Works fine now

mslookout inserts spaces into phone number, and prolly phone cannot recognise incoming number having spaces in phonebook?

I also cant fix it by changing CallIDMatch in the registry. It's bizarre as I have 2 contacts in my favourites: both are now set to No's starting with '0' yet when one texts me, their name shows and when the other does, their number shows. hard and soft resets have also failed to resolve this, HTC helpdesk no use at all, also logged with Windows helpdesk in case it is a microsoft, not htc, problem.
Am keen for other things to try, open to suggestions....
Am disappinted and amazed that what is otherwise a great phone, can't do what cheap cr*ppy phones, can , ie show the name of the person calling or texting.

Have you tried using Advanced Config and increasing Call ID match to 9 or 10?

No caller name when receiving Incoming Call
This may be an old thread, but sometimes the newer ROMs also have the same problem.
This happened to me after updating my from from WM 6.1 to WEH 6.5.3. So, I am updating this thread on how I resolved my problem.
Step 1. Edit the Registry and change the CallIDMatch value to 7 (the original value was 10).
Code:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:00000007
Step 2. Soft Reset (power off and restart)
Before I did this, I needed to copy my contacts from SIM to the Outlook Contacts list, so in my Contacts list, I have "double view" of both lists on the same screen - frustrating.
After this change of the Registry key value, I erased all my contacts from the Outlook Contacts list (use the Hide Sim Contacts function) because I prefer to have my default contacts to be from the SIM card instead of the Outlook Contacts. This way, I can be assured that all newer contacts will be stored on the SIM card and I do not have to worry about losing contacts if I change phones.

[Q] Wildcard Contacts Grouping

I'm trying to group together phone numbers whose first 6 numbers are identical into one contact to have them go straight to the voicemail.
For example xxx-xxx-1000 xxx-xxx-1001 xxx-xxx-1002
Is there a wildcard I can use instead of putting them in one by one?
I tried xxx-xxx-1*** but it doesn't seem to work. Is there any way I can do this without resorting to an app?

Wildcard Contact for Grouping SMS Conversations
Zupp34 said:
I'm trying to group together phone numbers whose first 6 numbers are identical into one contact to have them go straight to the voicemail.
For example xxx-xxx-1000 xxx-xxx-1001 xxx-xxx-1002
Is there a wildcard I can use instead of putting them in one by one?
I tried xxx-xxx-1*** but it doesn't seem to work. Is there any way I can do this without resorting to an app?
Click to expand...
Click to collapse
I'm interested in the same thing if anyone comes across a solution. My issue is more for contact management and SMS conversation grouping than it is for white/blacklisting. I get SMS notifications from a few different services which show up as a sequentially suffixed number for the sender. This results in dozens or hundreds of SMS conversations, making it difficult manage/delete SMS messages. For example, facebook notifications that get sent via SMS show up as 930010XX, where XX is incremented with each new message receieved. Rather than having a single SMS conversation with potentially hundreds of messages I have hundreds of SMS conversations, each with 1 message (or more than 1 if the SMS was delivered in multiple parts).
Any thoughts?

Sorry to resurrect an old thread, but I still think this would be a useful feature of contacts or people. I would love to put all of my work phone numbers (about 500) in there so I can block them when i am off for the day

Well at least for blocking specific numbers there's an option for using wildcards;
Go to Settings > Call > Call Rejection > Auto Reject List > Create and type in the part of the number that is always the same and then choose "Begins with..." below.
But I don't think there's a possibility for creating contacts with wildcards; even though it'd make sense so you can see who's call is going in and if you call that number you just would have to type the last numbers, depending on which one do you want to call.