Ok I am trying to get TomTom running on my 8125. It seems as though I have everything set up right, but when it takes me to the choose a map page, it just hangs there. I have tried US maps, and a Great Britan map, but nothing happens. Anyone know what the problem could be? IT is really driving me insane. Also, I dont see anywhere where to set up GPS unit.
setup.dat?
Do you have a file called setup.dat in \storagecard\my documents\tomtom? You need this file for TomTom to work.
I have to check, I uninstalled it the other day, because i was getting very frustrated. You wouldnt have an installer, or know where to find one at would you?
What kind of TOMTOM are you using?
The maps are in specific format and secondly it depends what kind of tomtom you are using. I mean original or cracked. Post it and i can let you know how to set it up. It's not hard. Works fine on mine 8125 with Holux GpSlim 236.
Take care.
Hummer, I been trying to post my program here but it is too big. Are you running a cracked or a clean version? I have been trying to use a cracked one i found somewhere, but having trouble installing it.
How to...
I am using 5.21 cracked. got it from emule. What you need to do is copy the file on your sd card and then execute it in the pocket pc. then do not open it. Copy the cracked folder in my documents and then replace tomtom.exe file with the cracked exe file, which is inside the crack folder. You can find the original one in program--Navigator. Replace it and install whatever voice you want and then run it. You will be able to bypass activation. Copy the maps in the sd card and your software will detect the maps and you will be good to go.
let me know if it works.
take care.
TomTom 5.21 Success on 8125
The key to TomTom 5.21 is that most of the maps running around (at least for the US) are too old to be recognized by 5.21. The maps need to be 567 (that's V5.67) or greater.
Get everything you need right here:
http://www.gsmhosting.com/vbb/archive/index.php/t-270346.html
:wink:
Initially I had problems with getting tom tom 5.21 to recognize the maps I copied over to the sd card. I actually had to install the maps from the setup cd from an earlier version. Everything is working smooth now.
Latest USA maps????
I have USA and Canda maps and they work fine with my 8125 but the only problem i have is that these maps are old and don't show my neighbourhood and many other places even though all these places are there for the past 3 years.
Can anyone tell me where can i get the latest maps or may be the recent one that will work.
Any help will be appreciated.
thanks
Latest USA maps????
I need latest US maps for my 8125. Please help! The version of TomTom is 5.21
Thanks!
Here you go - all the US maps can be downloaded from here : http://www.tomtom.com/plus/services/mds.php
in My documents >>> tomtom folder....
do you have a file called CurrentMap.Dat
it needs this file to recognise maps. the file does nothing but needs to be there.
you can make a file in notepad and send it to your ppc, just make sure the file name is correct
Related
Ok - got TomTom on my XDA mini s.
Now - maps.
Added maps as stated here:-
http://www.beyondthetech.com/blogs/kjam/2005/10/surefire-method-of-installing-tomtom.html
do I just add another line to the Current Map file to point to another map directory?
And does then TomTom auto add the maps, if not - how do I choose a different map.
and finally - voices. Can I store these on SD card and if so - where do I amke any config changes
Thanks
Scott
OK, so just how did you get TomTom on there? Did you have to use Activesync? If so, what happens when the thing goes T.U. and you don't have the software on your memory card ? :?:
Used the 5.21 upgrade as that installed via the pc through active sync as not supports WM05, and then followed instructions on the screen. Then patched it.
Used the link above to setup the bluetooth gps and get the map directory setup, and it just seemed to work. I have a BT GPS - BT-77 model.
No issues so far.
Just sussed the voices, there has a to be a voice folder in the root.
Now - just want to know how to add more maps, and how I alter the CurrentMap file
Scott
I have downloaded the TOMTOM Version 5.21 that is compatible with windwos mobile 5.
I installed it and everything is ok.
When I try to install maps with TOMTOM 5 the software on the pc stops and does not install.
With 5.21 there is no menue point to install maps.
How can I install maps ?
Thank you
http://www.tomtom.com/support/
Only of course if you bought a LEGIT copy.
allyourbasekris said:
http://www.tomtom.com/support/
Only of course if you bought a LEGIT copy.
Click to expand...
Click to collapse
Ha ha , genius!
But they'll never listen!
The threads spring up here, there and everywhere asking for how to install cracked apps.
Idiots
simply install appliaction and drag the maps on to your sd cards root directory.
they should pick up staight away. As for legit whoppee Tomtom taske ages providing support I gave up on them and use a duff copy works first and everyt time. No hang ups and no crashes, no fuss. AI do actually own 3 copies of tomtom 5 and have the enitre map collection all legit and paid for.
Hi,
Going to the states next week so i wanted to add new york and nevada maps for tomtom. I have placed the maps onto my mini sd card but tomtom can only find my original great britain map that i use daily. How can i use these usa maps? I think it's something to do with the current map file but i aint sure what i'm doing. Any ideas.
cheers
just stating the obvious, but have you tried changing map???
yes gone into preferences in tomtom to change maps but only map visable is great britain map?
I'm assuming you're running the updated tomtom version 5.21 and trying to install version 5.0/5.1 maps. These will not work, and you will not be able to see them in the map selection screen. I believe maps from version 5.0 are labeled as 566, while maps for tt 5.21 are 567. In the folder of the map you are trying to load look for a file named (statename).pna, if you open this with wordpad on your pc you will see which version map it is (probably 566).
I don't believe tomtom has released single US maps for version 5.21 yet (maps version 567). To get the 566 maps to work you will probably have to downgrade your tomtom navigator .exe to 5.0, however if you're using a bluetooth gps reciever it will probably stop working since this version does not accept ports 6/7. I'm in that boat right now
yeah that right just checked and the maps are for tomtom 5 not 5.21!!! dam needed them asap aswell. nevermind
im running tomtom 5.210 and in the verion info it states GB map ver562 and both the map and blutooth on port 7 works fine for me.
us maps
How did you get the USA maps to work on version 5.21.??? I have tried everything that I can to get it to work with no joy....
I am just hoping that new maps are release before I go to the states later in the year.
I am open to any suggestions / advice on how to get them to work...
Hi,
I too am using the 5.21 upgrade and all my maps still work, GB Map v562, France Plus v571 and Australia v568, application version 5.210 gps driver v1.20.
no problems with maps at all, have you tried downloading them again......
Limewire has them
cheers
ferritt said:
Hi,
Going to the states next week so i wanted to add new york and nevada maps for tomtom. I have placed the maps onto my mini sd card but tomtom can only find my original great britain map that i use daily. How can i use these usa maps? I think it's something to do with the current map file but i aint sure what i'm doing. Any ideas.
cheers
Click to expand...
Click to collapse
I would ask TomTom tech support or get a refund if I were you .....
You can just use the old 5.0 exe.
Replace the 5.21 "tomtom navigator.exe" in program files\navigator with the old 5.0 one.
Just remember to first back up your 521 exe!
I do this all the time as in the States a lot.
If you just own 5.21 and don't have the old exe the suggest you download it from a torrent - you've paid for version "5" afterall.
anyone tried tt7n on the titan? i cant get it to installed.
http://forum.xda-developers.com/showthread.php?t=401619
I also get an error when installing. A few folks have extracted the files from the cab, renamed the files according to the xml included, and are able to use it. Now just waiting on someone to kindly post those files, but it seems like it should work soon enough.
i used wince cab manager to extract the files to the appropriate folders. still no go. when launch, it still says that the app is not compatible with the device.
here is a cab file that will work on the titan.... don't ask where to find maps you're on your own
http://rapidshare.com/files/124030856/tomtom7a.rar.html
Map won't work
I have TomTom 6 with all my maps, but they won't work with this TomTom 7. Anyone knows what I can do? Maybe where to place the files?
What is the difference in TT6 and TT7?
works
Just installed Tom Tom 7.450.9028 with USA_and_Canada 720.1803 map and it works just fine.
Be sure to put the Map and Voices in their own folder on the storage card
I have Garmin XT 50 and Tom Tom 7 on my device - both work fine. Waiting to try IGO8 whenever they finally release the version 8 maps. Come on NAV-N-GO !!!
I still prefer using my bluetooth GPS versus the onboard GPS
Mule
Muledeer said:
Just installed Tom Tom 7.450.9028 with USA_and_Canada 720.1803 map and it works just fine.
Be sure to put the Map and Voices in their own folder on the storage card
I have Garmin XT 50 and Tom Tom 7 on my device - both work fine. Waiting to try IGO8 whenever they finally release the version 8 maps. Come on NAV-N-GO !!!
I still prefer using my bluetooth GPS versus the onboard GPS
Mule
Click to expand...
Click to collapse
I had them placed in their folders on the memory card and still no luck. Please can you give a step by step guide on how to do this? It would be much appreciated
Thanx
Damionix said:
I have TomTom 6 with all my maps, but they won't work with this TomTom 7. Anyone knows what I can do? Maybe where to place the files?
Click to expand...
Click to collapse
there aren't any files you can just replace....
you are going to need to find new maps... here are the maps i need the internet is a great big place im sure you can fine it some where "USA_and_Canada_720.1803"
chong67 said:
What is the difference in TT6 and TT7?
Click to expand...
Click to collapse
there is a lot... just install the app and find out for urself
out of curiousity.. has anyone been able to get this to work without first priming the gps? i have it installed and maps working fine, but even with the settings for the built-in device, i still have to run a separate program to initiate the gps lock...
Damionix said:
I had them placed in their folders on the memory card and still no luck. Please can you give a step by step guide on how to do this? It would be much appreciated
Thanx
Click to expand...
Click to collapse
1. drop the tt7 cab file on the storage card
2. run the cab file from the PPC
3. install to storage drive - delete cab file
4. get latest map and activate it for your device
5. copy \Voices, \your map to the root directory of storage card
6. run tom tom 7
Mule
anyone got tomtom home and mapshare to work with the titan? a couple of ppl got it to work with the kaiser.
Interesting...
I currently have the latest TT6 with latest 675.xx U.S. maps. What actual changes/improvements can we expect in TT7?
I was also wondering if they have fixed an annoying bug in TT6. Any time you launch TT6 it ALWAYS defaults to disabling Audio and you have to manually go into preferences and enable it _twice_ before you get sound. This is a documented, well known issue and it deals with how TT6 detects the radio as an active data connection and thus mutes audio since it thinks a communication is open (or something like that, may have it wrong). I believe it is designed to work like this as its present in all builds but it is a bit annoying.
Alpine- said:
Interesting...
I currently have the latest TT6 with latest 675.xx U.S. maps. What actual changes/improvements can we expect in TT7?
I was also wondering if they have fixed an annoying bug in TT6. Any time you launch TT6 it ALWAYS defaults to disabling Audio and you have to manually go into preferences and enable it _twice_ before you get sound. This is a documented, well known issue and it deals with how TT6 detects the radio as an active data connection and thus mutes audio since it thinks a communication is open (or something like that, may have it wrong). I believe it is designed to work like this as its present in all builds but it is a bit annoying.
Click to expand...
Click to collapse
ttn7 interface had some touch up, but remain pretty much the same as tt6. however, there are several big improvements, including the ability to use newer map and the ability of mapshare/map correction, and stronger and better routing engine. newer map is always better. all of the verson tt 6 maps were missing my cousin new area and my girlfriend's neighborhood. version 7 map has them. i havent got a chance to get mapshare working with my titan yet, but hope it would work one day. i tested the routing with tt7 by entering several destinations that im familiar with, such as my brothers and my sisters's places, parents and friends home, and tt7 gives me the best route that i would likely take. with the destinations that i have tried, i can say that routing of tt7 is much better than, iguidance, garmin xt, and tt6.
the voice/audio bug that you mentioned with tt6 6.032 is not there in tt7. for the same reason, i used tt6 6.02 instead of 6.032. tt6.02 doesnt have this issue. for some reasons, tt6.032 doesnt see your voice file at launch.
Just got this going right now after an interesting install. Works great, love having the newest map and engine. If anyone needs a walkthrough PM me and I will help as much as I can.
How do you install the maps I have the USA_and_ Canada_720.1803. Its over 800 MBs, that wont fit on my phone. Do i need just certain files out of the map folder?
ws6kid said:
How do you install the maps I have the USA_and_ Canada_720.1803. Its over 800 MBs, that wont fit on my phone. Do i need just certain files out of the map folder?
Click to expand...
Click to collapse
You will need to put the map and voices folders on the root of the sd card. The program cab should be run and they will find each other.
Is there another mirror for the app (not the maps, the app)? The one posted earlier in this thread was removed from rapidshare, and this one doesn't seem to work on the titan.
Hordee said:
out of curiousity.. has anyone been able to get this to work without first priming the gps? i have it installed and maps working fine, but even with the settings for the built-in device, i still have to run a separate program to initiate the gps lock...
Click to expand...
Click to collapse
I was wondering this as well.
I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!
TomTom 7.915 installed and working fine here with Western European maps.
andrewrees said:
TomTom 7.915 installed and working fine here with Western European maps.
Click to expand...
Click to collapse
I've got USA & Canada maps. Any way to tell the version of the maps you're using?
Nevermind. I found out how to make my TT6 maps work. This guy is golden!!!
http://belthur.blogspot.com/2009/08/getting-tomtom7-software-work-with.html
shawndh said:
I've got USA & Canada maps. Any way to tell the version of the maps you're using?
Click to expand...
Click to collapse
in the main screen -> click signal bar -> click version -> look for "Map"
Thanx for all the info guys. I'll def use it in the future, but I was able to get US & Canada maps, vers 660 recognizable with TT7.450 by changing the vers#, build#, and ID#. I also had to reregister my maps using my product code. I didn't have any problems after that.
FYI, I could not get some versions of TT7.910 to install as a CAB. Those had to be unbacked first. I did get TT7.450 to install with no problems, but I had to:
1) install it to the SD card first
2) hard reset my device (because the install screws up your BT stack on TP2)
3) then make my short cuts from the storage card
Now all is working fine. I just don't get update features and the better looking maps.
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
shawndh said:
I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!
Click to expand...
Click to collapse
also had issues w/ bluetooth after installing it, so i hard booted, currently using Garmin Mobile XT and it works great on my TP2
shawndh said:
I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!
Click to expand...
Click to collapse
I have TT7 working on my tmo tp2 but no voices, everything else works great.
Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I could never find those dll files, so I just hard reset it.
Nice first post.
Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I don't have those files... is that good or bad?
Gman65 said:
I have TT7 working on my tmo tp2 but no voices, everything else works great.
Click to expand...
Click to collapse
You should have a "voices" folder on the root of your storage card. If you can connect to TomTom Home on your desktop, you can down load them to your phone. Or you can find them on the net. They're not hard to come by. But you should check to see if your voices folder is on your storage card somewhere.
error, sorry
201reyes said:
also had issues w/ bluetooth after installing it, so i hard booted, currently using Garmin Mobile XT and it works great on my TP2
Click to expand...
Click to collapse
Were you able to copy the Garmin maps to another storage card or did you have to keep it on the storage card that came with the software? I was looking at buying the Garmin software but that uncertainty made me hesitant.
shawndh said:
I could never find those dll files, so I just hard reset it.
Nice first post.
Click to expand...
Click to collapse
Ow yes, you'd need something like Total Commander to view/remove .dll files in the /Windows directory. Neither the default WM Explorer or the W7 explorer when USB-linked could do that here.
TT7 works fine here, just some GPS lag and hardware keyboard adds some weird 'a' character after each normal character.
Had BT troubles with some older version, downloaded the latest I could find and had no troubles at all.
shawndh said:
You should have a "voices" folder on the root of your storage card. If you can connect to TomTom Home on your desktop, you can down load them to your phone. Or you can find them on the net. They're not hard to come by. But you should check to see if your voices folder is on your storage card somewhere.
Click to expand...
Click to collapse
No luck connecting with home, and i do have the voices folder in the root of the mem card. I also tried placing the voices folder on the device in the navigator folder... still no luck, but thanks for the help
Got TomTom 7.915 working fine on TP2, with no issues with BT. Australian and US/Canada maps installed. Installed onto device, with maps on SD card. With voice working.
i have tt7 working for me, here is what I did.
installed tt7 to my sd card then hard reset (because i have all sorts of problems with the bluetooth)
copy my voices files to sd card\program files\navigator\voices
my maps are in the root of the sd card
then use total commander to create a short cut to the program.
I havent had anymore problems at all and it works first time I have flashed my phone 6 times so far and I dont have to reinstall it.
I hope this helps someone here
I read the issues with TT7 so tried to do Garmin XT - City Navigator 2010.10 install. I have it working successfully with Voice, Traffic and Fuel prices.
BTW, I am newbie unlike most people here
=ShyGuyCalif
Worked !!! Great !!! Just renaming BtSdkCE30.dll, BtCoreIf.dll and all is back again
Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I'm tne next guy!!! Thanks !!! Worked !!! Great !!! Just renaming BtSdkCE30.dll, BtCoreIf.dll and all is back to normal again