Database Users

Can we upgrade/downgrade using serial (LTP1)?

I was running ROM 3.20.06 and Radio 4.21.00.
I read everything on here about upgrading to ROM 4.00.05 and figured that I was ready to upgrade. Many others experienced no problems when upgrading from 3.20.06 to 4.00.05.
The upgrade procedure was complete and I hard reset.
The XDA turned on and a white screen with "Test Only", "Not For Sale", A Microsoft Windows Powered logo and the Platform information appears and that is all that happens. In other words, it is ****ed and won't do anything.
Does anyone know whether ROMs can be installed via, LTP1 seeing as though the USB will not communicate? Will I get the same problem?
A reply would be nice.

Forgot to mention...
I forgot to mention that I will be connecting my USB cradle to a USB-2-LTP1 cord. If that helps anyone reply then sweet.

Get yourself an sd card reader writer and an sd card of 64 meg or more. Use the tools on the forum to program the rom to sd card, then you enter bootloader mode and your phone will burn the rom from there. As for the lpt port, no way that I know of.

Bootloader mode?
:roll:
Is it possible to change the XDA into bootloader mode if the XDA is not functional? (I cannot do anything, just a white screen is what I see)

Give it 15-20 minutes
I know that this sounds stupid, but don't mess with it for about 15-20 minutes. It seems that if the radio stack is screwed, the OS takes forever to boot. I have been doing OS installs for several months, both directly and via an SD card, so I was comfortable with the process. I had NOT ever done a radio stack upgrade as I had the latest (& only one) that AT&T had released. With the "official" rollout of WM2003 by AT&T, I decided that I liked my custom 2003 ROM that I had cooked a couple of months ago, but I did want to try the newer radio stack. Well, all hell broke loose. At first, I had a PPC that would not boot. So, I did a new flash of the OS via SD chip. It seemed that it too was locked (ie the initial splash screen with OS info at bottom and then it seemed to freeze). Then I read in another thread that someone had noticed it took about 15 minutes for the thing to reboot after a failed radio stack upgrade. And so after giving it time, sure enough, my PPC did finally boot.
The bad news is that I have NOT been able to get the radio stack reinstalled. I have followed all the tips and suggestions, but no luck. If you find that yours finally does boot, then goto start, settings,system info and see if there is info about the radio stack. If it is blank, then you have not radio stack and that is why the long boot cycle.

Radio stack
Ok, when I performed the upgrade, I believe it was only the ROM that upgraded. The radio version is the orignial XDA upgrade which was released to the public as a genuine radio (B) upgrade. I'll look into the SD boot load. Will it automatically install from the SD card? Anyone got any idea?

Upgrade Wont Work

Alright so I had a working Mobile 6 ROM on my HTC 8125 it was the Touch ROM, so I tried doing a hard reset one day by pressing the send key to format and it says formatting then FAT Format Failed or what not.
So I reflashed it with a different ROM as the Touch one wouldn't work anymore saying I needed a newer Touch ROM to flash it to my phone. It's running IPL 3.08 and 3.08 SPL not sure if that means I have to downgrade back to 2.x IPL/SPL. However so I got a new ROM flashed to it and it just sits at the booting screen for that ROM even though it successfully flashed. So once again I try the format and it says failed again.

What exactly are you asking for?
I've flashed my tmobile MDA a few times, but i'm no expert.. From what i've read, I believe the SPL/IPL version has to be specific for each ROM. The older one's have to start from scratch at 1.0x SPL/IPL, while the WM6 ROMs seem to be using the 2.0x version IPL/SPL.

What I'm trying to figure out is why it wont flash it's a unlocked phone and it says it flashes just fine goes to 100% reboots and gets stuck at the IPL/SPL OS Screen then if I do the voice dial / other button where it says press send to reset it says FAT Format Failed so I assume the WM6 isn't working right ive tried a few different ones too.

what I suggest is reflashing to your original wm5 rom, and moving on from there

Do you have a Link it's the Cingular 8125 HTC

Anyone? I've tried searching for the original ROM but cant find it.

So am I to understand no one has any clue where to get the original ROM? I've seen it on here before but the search feature is quite useless.

How about going to the source??

newbie2 said:
How about going to the source??
Click to expand...
Click to collapse
Hmm well that was too convinent didn't think of that. Now to hopefully see if that works. If not anyone have sugestions on what would cause this? The device is completely unlocked. Pretty much what happens is no matter what ROM it is, it gets stuck at the IPL / SPL / OS Screen and doesn't go any further. But I'm still waiting on the origional ROM download which is going slow as hell. So hopefully that will do it.
---------------
Origional ROMS now on it
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
Cingular Screen still sits there and doesn't load, freaking crappy ass Windows product just another reason why I got a different phone.

I faced similar problem ("Format is failed") this morning:
http://forum.xda-developers.com/showthread.php?t=305453&page=3
After searching with the key words on the forum I found this very helpful to me:
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
Cheers!

Just my luck I left my SD card for the phone at work (which I won't be back at for 3 weeks) bah.

hermes brick... no rom.. wont boot using PB

my friend owns an 8525 and all of a sudden it stopped working (cant make/recieve calls and text messages). i tried doing a hard reset and it didnt work. he called att and the tech guy told him that his phone needs to reinstall the rom, which also didnt work. he bought a new phone and gave me the hermes so that i can play around with it. i tried installing wm6 on it and at 15% the update stopped.. and the phone reset itself. now.. it doesnt have a rom installed and keeps on going to the tricolor screen. i tried the unbrick method (in the wiki) several times and still no luck. it keeps telling me that i dont have enough ram but the booting still wont start. what are my other options for fixing this?... my kaiser was bricked before and i did the unbrick method for that and it work.. i havent tried that yet but is there any chance that it will work..?..
he doesnt need the phone anymore but hes hoping that itll be fixed so he can use it as a backup phone.. so.. yea.. any other ideas for ressurecting an old friend?
thanks!!

Sounds like the radio rom is dead.... Whats the SPL? You have a chance if it has Hard SPL installed - should say SPL - 2.10 olipro.
If so, try flashing a stock rom first, then a radio only rom. If you get no love, flash a cooked rom on it. I'd do it using the sd card method.
It should work as a PDA if you can't flash the radio, but its a brick cos no more phone calls...
If he doesn't want that, he could sell it on ebay for spare parts...
Cheers...

I just went through a similar situation last night. I am running dvh_79's v16 (build 19965.1.2.3) Lite. I added his HTC Today Plugin from the sdauto zip file but didn't like how the Today plugin slowed down my phone, so I uninstalled it and that's when my radio took a dump.
I used the instructions in the Hard SPL forum post #116 to unbrick it using the same rom and radio .nbh files and it went off without a hitch.
The first thing anyone should flash onto their phone is Hard SPL v7. Even before any skins. It won't make you 100% safe from bricks, but I'm damn glad I had it on there this morning while I was reinstalling my phone.
BTW ultramag69, I saw a lot of posts by you in various threads talking about unbricking a phone, and correct me if I am wrong, but if I have olipro 2.10 SPL on my phone (which I do), is it possible to initiate an install of a ROM image without being able to successfully boot the OS on the phone? Does Olipro automatically look for HERMIMG.nbh on the SD card? That was a point of confusion for me at first until I ran the HARDSPPL.exe file, but then again my phone didn't brick to the point I couldn't boot the OS.
What are the choices if you cannot boot OS? Are there any that can be performed from the bootloader itself?
Thanks.

well.. i did the kaiser unbrick procedure.. the mtty thingy.. it kinda worked. after that i installed the dopod wm6 rom... it handled the wm6 well---for a while.. after booting, the phone would turn off by itself (w/ 100% battery of course) or even restart itself..
sometimes it will stay on and be "fully functional" (w/o the calling and messaging still...) but somehow freezes when i look at the device information, specifically in the page where it displays the imei (which is missing btw...)..
the "phone" function doesnt work either, as it doesnt show the dialer.. and then after a few minutes, the phone finally freezes...
idk why this happens.. i tried installing other roms but the rom update always freezes. i tried 4 different roms already... so i had to do the mtty thing again...
(i have hardspl installed)

Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
akosiryan, it sounds like you may have a corrupted radio rom. This is not gonna make you happy but this is ,at this point, almost 100% unbrickable. You could try to flash a radio only rom - no os, just the radio - but if it gets stuck and you've tried the stock rom then it looks like its a permanent brick...
You should be able to use as a PDA if you don't play with the phone functions though...
Just as a last shot, you could always use MTTY to check for bad blocks BUT this requires you to downgrade the SPL to 1.10 olipro to fix if you do. Please note though that sometimes the carrier does give you a couple of bad blocks to "brand" it as theirs...
Best of luck.

ultramag69 said:
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
Click to expand...
Click to collapse
Thanks ultramag69! I am indeed running olipro 2.10 on my phone so it makes me feel better knowing that if I can get the nbh on the card, then I can flash the ROM that way.

oh well.. me and my friend decided to sell his phone on ebay or sumthin..lol.. so its not a problem.. ill try to do one last step tho.. like flashing the radio only rom to see if itll work.. but i dont really care anymore.. lol.

No problem... If the Ebay from where you're from is like Aussie ebay, you should get approximately 1/2 to 2/3 the price that the working models go for. Generally the price goes up about 6 hours before the end of the auction with the price skyroketing in the last 10 mins... I'd probably give it a few days on Ebay to make sure people see it....
If you do get the radio rom working, Hermes (jasjam/dopod 838 pro) go for about $250 - $350Aud in Oz.
Cheers...

ok then! thanks

official at&t callerID update bricked my phone.. :(

after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!

......
noone?????

The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)

Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...

Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .

i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck

There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL

It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?

another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL

When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.

I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.

The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!

Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.

It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.

Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."

The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!

Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1

I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.

$25 reward to fix my phone. Problems for over 45 days.

I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.

the problem appears to be that you have slightly different hardware to every one else.
didnt realise you were having issues with sspl, that at least should work ok. by time out do you mean there sspl boot screen appears burt nothing else?
if so what happens if you disconnect the usb cable and plug it back in?
if it changes to usb then rerun the sspl without changing anything on the hd2
you could also try - and uninstall the windows drivers for the qualcomm cdma drivers or whatever they are called on you pc. and reconnect in boot loader to let them reinstall.

SSPL used to work, it stopped working after I flashed a newer rom to play with. When I use the SSPL it goes into the bootloader screen just fine, then I hear the USB disconnect sound and the SSPL program times out quickly with the exit button citing no connection.
I have 2 x Windows 7 64 bit computers, 1 x Windows 7 32 bit and one XP 32 bit computer. I get the same results on any of them. All after the most recent ROM upgrade.
I have not tried running SSPL from boot loader screen, did not know that was possible. Trying that now. Just need to download a known working ROM.
If that works I'll be back in the same boat as before, stuck with 2.0 SPL and 2.06 radio. I want that SPL 2.0 off my phone badly.

OK, trying SSPL from the bootloader screen got me a little further towards ROM flashing. I can see the htc on the black screen with the progress bar. It now sits at 0% with no movement indefinitely.
Going to try another ROM and see if I can get the ROM installation to actually begin.

If you still haven't tried it do this: start SSPL when you hear the USB disconnect sound remove the USB cable (either from device or PC) and then connect it again! this should allow the SSPL to enter USB mode! I've had similar problems long ago and this trick was doing the job! Not sure that it will help you but just a thought!

Newb here:
I had something similar. I installed HSPL and everything was fine thereafter. The radio wouldn't flash any other way, in fact it would disconnect like you said, or if I manualy took the phone to boot loader, it would stick at 0%.
There is a HSPL thread stickied in the ROM section and I believe it explains how to remove it if you need to "re" validate your warranty. Although reading once more it does say you need SPL 1.42 to get it to install.
Have you tried installing an official HTC ROM downlaoded from their site? This will take you back to the original SPL version 1.42...

I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (

Have you tried to hard spl it? If I missed it in your post, I apologize.

Not in a long while, I should try again I guess but I was totally under the impression that HSPL will error all the time unless you have SPL 1.42 installed on the phone.
Edit: Just tried and it errors because SPL 1.42 is not on the phone, it's the only SPL that HSPL works on as far as I know.

balane have you tried installing a stock rom from your SD card? this would revert the spl back to 1.42 and allow you to then flash HSPL (I think, almost certain) but you said you cant do anything with the sd card, have you tried that? have you tried with different SD cards? also have you made sure that it is formatted to FAT32?
Another thing you could try if all else fails: MTTY, look at the MTTY thread by MystikGenius, its stickied in the rom development section, this will format your phone from which you can then try to flash from usb or sd. I would recomend trying to flash from SD which then again may revert your spl.
Im going to school now so I wont be able to help you anymore 8 or so hours, but PM me later if your still stuck.

I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.

Yes, I've tried dozens of stock roms from the sdcard, every one I could find in fact and they all hang at the Loading... screen. As stated in the op, I used two different cards both formatted to fat32. I guess I could try a third card, not sure if it's worth a try or not.
I looked at MTTY but that doesn't do a thing with SPL and my SPL is the root of my issues.
Update: I finally did find a ROM I could get flashed via SSPL. It took like 3 tries to get the progress bar going but it did get installed. I can't even recall what series of events got it to go but at least my phone turns on and works.
Still the same SPL and radio though. No change there.

bobsbbq said:
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Click to expand...
Click to collapse
I could have swore I read some people who were able to get the SPL 2.0 off their phones but I could be mistaken. I'm actually ok with any SPL as long as I can sspl different ROMs. I just want to get the radio current so I can run the latest TmoUS ROM, I would totally and 100% pleased with being able to update the radio. I have found now way to flash a more current radio.

balane said:
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
Click to expand...
Click to collapse
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English

balane said:
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Click to expand...
Click to collapse
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Otherwise, pester bepe for when the HSPL comes out that is compatible ywith SPL 2!

ancola66 said:
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
Click to expand...
Click to collapse
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???

mwillems2 said:
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Click to expand...
Click to collapse
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?

balane said:
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
Click to expand...
Click to collapse
YES ! You can use any Goldcard. I write instructions for you but my very bad English

balane said:
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
Click to expand...
Click to collapse
When you say oem, do you mean just the nbh with which you have tried to install using tools or the self extracting exe that HTC provide? I'm just asking cos to me, oem means it comes without all the manufacturers extras.

I've always been under the impression that the only way to downgrade an SPL was to install a complete OEM package ROM/Splash/Radio/SPL as a LEOIMG.nbh from the root of the SD card. I've tried dozens of these both from US based ROMs and abroad. None of gone past the Loading.... screen. I've tried 1.42 and above ROMs, no luck with any.