I messed around with the Network adapters settings, while trying to get WiFi to work properly.
Now everytime I connect to ActiveSync via USB, I get the error message, "Unable to obtain Server Assigned IP address". I am sure this is because I set one of the adapters to "Automatic IP", but I don't know which one. Moreso, my Wizard does not access the internet properly when connected via USB.
Could someone please tell me which adapter I wronged, and what setting its supposed to be?
Solution
Hi, make this:
Start > settings > connections > Network cards > Remote-NDIS Host > Click Use specific IP address
Enter 169.254.2.1 for IP address
Enter 255.255.0.0 for subnet
Enter 169.254.2.2
It functions on my Wizard...
Thanx
Thanks a lot @Viking..
does the trick for me. I had actually tried that before but I had assigned the IP 169.254.2.2 (thinking that 169.254.2.1 would be the laptop) and I got a "Limited connection", so I just set it back to automatic.
Related
into teeny weeny little pieces.
I feel so much better now!!
Anyways...I have a wireless home network up and running and would like to connet the xda to it.
I can connect to the router no probs but IE cant connect to the web. it says "the page you are looking for cannot be found".
Any ideas why I can connect to the router but not to the web?
Cheers folks - thanks
I know how you feel. There are a couple things you have to do.
First check that you have selected to connect via "work".
Then ensure that the IP address shown is in the range of 192.168.0.X
had no problems with my wifi on my home network, as ale210p said, I think it's with the way your connect via "work" or "ISP" is configured
hiya folks
thanks for coming to my rescue..hopefully i can get this thing on the road.
- in connections - advanced - select networks. both selections are set to "my work network"
- in configure network adapters - network adapters. the "my network connects me to" dropdown is selected to work.
- where can i check my ip address on the device?
Alhtough I am connected to my wireless network as that what the wireless LAN manager says?
any ideas guys?
many thanks
Is your internet provider checking the MAC address? my provider checks for the MAC address and hence I had to register my MAC address first with the provider.
I'm pretty sure my ISP isnt checking my MAC address as my PC and other computer on the network work fine with regards to internet access and I never gave the MAC addresses to the ISP.
However, my modem router does have mac filtering enabled. I have copied the MAC address of the xda to the allowed list. However I've also tried to turn this filter off and the result was the same....I still could connect to my home wireless network but had the same error message when trying to surf through pocket IE.
Any other ideas on why I can connect to the network but IE wont let me surf?
thanks again
I'm having exactly the same problem as Richard. What I don't understand is, I can drive around and find free residential wireless hotspots and surf the net , but I can't do it on my own WLAN!
IP info OK?
These symptoms could indicate that vital IP info is missing on your XDA.
Does your XDA get an IP address + gateway address + DNS server address from the router's DHCP server? Use vxIPConfig to determine this http://www.cam.com/windowsce.html
I know for a fact that many times (not always) my QTEK 9090 does NOT get the required IP info from my SMC Barricade 2804WBR b/g wireless router, so I started using fixed addresses on my QTEK.
If I use DHCP, many times I can connect to the router but am unable to access the internet... Because the QTEK has not received an IP address/gateway address/DNS server address in those cases. Fixed addresses always work.
whoa
thanks for the advice. i installed the app. rubbed the sticks together and there were sparks i tell you!!! but what does it all mean?
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255
im no tekkie so am not sure what the above means? does it provide any clues?
thanks for the advice so far
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
richard321_blue said:
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
Click to expand...
Click to collapse
Fixed IP address is good, but have you also put in the gateway address and DNS server address? Normally the gateway address + DNS server address = router address.
If your routers IP address would be 192.168.1.1 (quite common address), then your IP address could be 192.168.1.2, gateway address would be 192.168.1.1 and DNS server (name server) address also 192.168.1.1.
BTW; this:
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255 <========= !!!!
means that DHCP didn't work!
I suppose that when you state "connect to the wlan" you mean that you can 'see' machines on your local network? Or what? That would make sense because you wouldn't need a gateway address and DNS server address for that normally (broadcasts).
siliconaddict....you're a genius!
finally it works, it works i say.
fantastic.
thanks to all for the advice and feedback - much appreciated.
can i stoke the fire and ask how i can sync via wifi as well?
never done it myself, but here is a guide
I have never synced over WiFi myself, but here are some guides:
http://theillustratednetwork.mvps.org/WM2003/ActiveSync/WM2003ActiveSyncConfiguration.html
http://forum.xda-developers.com/viewtopic.php?p=132820
Please note that the next version of Activesync, version 4, doesn't do syncing over Wifi anymore...
Good luck!
Sorry to be a complete noob, but:
1. How do I find out the IP Address of the XDA (Is it in Wireless LAN Manager, under "current config" and "IP:"?)
2. My Netgear USB WLAN is showing an IP of "0.0.0.0" (on command prompt >> ipconfig) How do I change this?
Thanks
Q & A
A 1: On your PDA use Use vxIPConfig for this http://www.cam.com/windowsce.html. Unfortunately the OS doesn't have a standard utility for it, like 'ipconfig'.
A 2: Does your router hand out IP addresses at all? Or: is DHCP enabled on your router? If true, do you have the correct drivers loaded for that USB NIC? In Device Manager how does it look? Yellow exclamation mark? Can you post the output of 'ipconfig /all'.
Hope someone can help: Every time I connect my JJ to my PC, I get a popup error message "Pocket PC Networking: Unable to obtain a server-assigned IP address. Try again later or enter an IP address in Network Settings"
This only happens when I connect to my PC via AS, and clearly it's because my JJ is not finding an IP address for via-PC networking - only I CAN access the internet this way! So, it seems that some OTHER adaptor is trying to get an IP address and is failing
I've gone thro all my PPC's network adaptor settings - all set to obtain IP address automatically - but I do believe this problem started when I first looked at these settings.
Is DHCP server enabled on your PC/router/whichever?
No, my PC is not acting as a DHCP server, and my router is an adsl router that serves my PC - which it is doing fine.
I didn't change anything on my PC nor router, just browsed network ADAPTORS on my PPC and next thing I knew I was getting this message. :?
Further, my PPC IS getting an IP address on one of the adaptors, which I can ping from my PC, and it does connect to the internet via my PC without problems (it's 169.254.2.1 on the "remote-NDIS Host" adaptor - which you will show too). Thus, I surmise that the adaptor that is supposed to connect to my PC is working, and it's another network adaptor that's decided it wants an IP for some reason... :? :? :?
Not a critical error, but I hate not being able to solve my JJ problems
I had this problem too.
It's because the Remote-NDIS Host adapter is set to DHCP.
The "catch 22" is this.... If you set it to an IP, the ActiveSync won't connect, but your only other option is to set it to DHCP, then you get this problem.
The solution...
Set Remote-DNIS Host to DHCP via Settings->Connections->Network Cards
Now edit the registry...
HKLM\Comm\RNDISFN1\Params\TcpIp
Edit the key "EnableDHCP" = 0
Problem solved !... No IP set and no DHCP either.
Basically, RNDIS shouldn't have an IP set, but it shouldn't be DHCP either... but as soon as you view RDNIS via the usual network adapters setting then you are forced to have one of the other, which will cause the problem described in this thread or will cause ActiveSync not to work.
Thanks arthurfuxake!!!
You also solved my problem!!!
Good Fix! arthurfuxake
8) Thanks man that fixed that irritating "unable to obtain IP Address" message for me
Cingular/Siemens SX66
WM2005
Activesync v4.1
arthurfuxake said:
I had this problem too.
It's because the Remote-NDIS Host adapter is set to DHCP.
The "catch 22" is this.... If you set it to an IP, the ActiveSync won't connect, but your only other option is to set it to DHCP, then you get this problem.
The solution...
Set Remote-DNIS Host to DHCP via Settings->Connections->Network Cards
Now edit the registry...
HKLM\Comm\RNDISFN1\Params\TcpIp
Edit the key "EnableDHCP" = 0
Problem solved !... No IP set and no DHCP either.
Basically, RNDIS shouldn't have an IP set, but it shouldn't be DHCP either... but as soon as you view RDNIS via the usual network adapters setting then you are forced to have one of the other, which will cause the problem described in this thread or will cause ActiveSync not to work.
Click to expand...
Click to collapse
This should be more prominent than the other search results!
Thatz one awesome soltion arthurfuxake! Thanx man! It seems to have fixed that nagging "Unable to obtain server-assigned IP" error that used to keep popping up on my screen. There is only one other problem... my Atom still can't connect to the Internet through ActiveSync! Any suggestions?!
I have opened WIFI and connected to my NETGEAR AP, my pda appears in AP's connecting list. But while I open PIE I can't access any website. It always says "Locating", and "The page can not be found" after a while.
Below is my configuration, any problem?
1. Connections -> advanced -> Select Networks -> both are set to "MY WORK NETWORK" -> Edit... -> Proxy Settings -> check the option "This network connects to the Internet".
2. Network cards -> wireless -> in the found AP SSID, set connects to "Internet"
Network cards -> Network Adapters -> My network card connects to "The internet"
I have tried several different configs, but none works.
I am really crazy about it!!
Sounds like a DNS problem....
How are you assigning IP and DNS settings to your phone? Manually, or DHCP from the Netgear?
I just leave it "Use server-assigned IP address". When wifi connected, i can see my pda address is "192.168.1.2" and the AP is "192.168.1.1"
confused...
My laptop works well with WIFI at the same time.
Ive had this with a few DHCP servers in routers, half of the ones I use allocate IP fine but fail to send DNS server details.
Leave IP address allocation as Auto and manually enter your DNS servers. That should fix it.
if you've got an ip address in the phone, try typing the IP address of a server, eg. microsoft, in the browser....if it connects, then it proves it's a DNS problem.....then, as suggested....add the DNS settings manually...
Thanks Britman and Vap. It works now after I fill in the DNS server in wireless adapter. I should have remembered this.
omg...im having the same problem now. i know i had my wifi working because it worked out of the box and i was using agile messenger earlier today.
my settings are the same. what happened? i tried putting the DNS server in with no luck.
WiFi on Wizard
Try set "Power Mode" in "WiFi Settings" on Best Performance". To me WORK.
Re: WiFi on Wizard
pinelesss said:
Try set "Power Mode" in "WiFi Settings" on Best Performance". To me WORK.
Click to expand...
Click to collapse
wow, you are good. heres a virtual pat on the back
Indeed, although I'm very happy with the wifi in the Wizard in general (considering size and power limitations), it's certainly a long way shy of the signal strength of the internal broadcom adapter in my laptop.
Same problem
I am also having this same problem, but all this DNS stuff is a bit over my head. On the settings on my wizard I see the ip address, and the mac address ( under wi-fi settings -> advanced tab). I logged into my router and went to the DHCP page. On that page, it shows that DHCP is enabled and if I click on the Clients button, it shows my device with the coresponding ip and mac. On the DHCP page, I can enter DNS numbers, but where do I get these numbers?
The DNS settings (servers) are provided by your ISP
Depending on the router, if you look at the general or status pages, you should see the DNS ip addresses. Or, if you already have a windows pc connected on the same router, simply type 'ipconfig /all' at a coomand prompt - this will show you the addresses.
So what happens when you're at an airport or somewhere public with wifi? How do you know what the DNS settings are to enter them?
Most airport/public access locations with wifi setups normally have their DHCP servers configured with the DNS settings all in place (ie....nothing for you to do)....
However, some places will require the user to enter some information (for example, dns settings, WEP key, etc)
Similar issue
Can you disable the attempt by the phone to go to Cigular GPRS when you try to use a browser?
hi, i also have a p3600 and i want to upgrade the rom to wm6. everytime when i connect my trinity to my pc the same msg keeps popping up from time to time, namely that my trinty can't get an ip adress. so far i've only reinstalled activesync but it didn't change the problem. i dont want to flash the rom when this msg pops up all the time
sounds like a pc net work setup issue rather then a pda issue is your dhcp service running on the computer=?
yes dhcp is running, but i actually alrdy corrected the problem. searched through the forums here and someone had the same problem. all you have to do is change something in the IP settings from the ppc:
Start > settings > connections > Network cards > Remote-NDIS Host > Click Use specific IP address
Enter 169.254.2.1 for IP address
Enter 255.255.0.0 for subnet
Enter 169.254.2.2
and that resolves the problem
Hey everyone. Well the title says it all. Is it possible to manually type in an IP address to a specific router instead of the phone actually automatically giving me one?? If not, are there any programs that can accomplish this?
thanks
Easy there, you want to enter a fixed IP in your router in the computer? Or you want to select IP in the case of its type in the IP network on your phone?
Depending on the router, it works with DHCP, Auto IP, this is more of the router for WLAN network, it is configured with an IP again, to not be that your network is DHCP, it?
Computer (fixed) -> Router (fixed) + Router (DHCP wlan)
Any wishes?
thanks
If you have the IP of your wireless network, and only enter the track in his case:
Ex: 192.168.0.x
Ja, if your network is DHCP, assigns an IP Auto, and so leave them the phone!
Do not confuse this: If the connection of your home is wireless (radio) you will configure your phone to use the same sign, so you need a wi-fi router
Yes, there is a way to set a static ip on your WM device. All you have to do is go to Settings, Select the Connections tab at the bottom, select WI-FI, Select Network Adapters tab, Make sure "The Internet" is selected from the drop down menu, Select IEEE 802.11b/g Compatible WI-FI Adapter, select Use specific IP Address and fill in the requested info.
I never really thought about it until you asked. i knew there was a way to do it i just never took the time to look at the options.
I hope this helps, if not let me know.
I'm having trouble understanding your question. the phone doesnt specify the IP, if the router has DHCP enabled, then it'll automatically assign the phone the IP. You want it so that when you're on your WLAN, the IP address is fixed? If that's the case, then go into your router's setting and reserve a specific IP that you want your phone to have. All you have to do is input your phone's MAC address into the router's setting with the desirable IP address. The next time you're on WIFI, your phone will have the IP that you assigned.