how or what can you do to get gprs to turn off after it logs in checks pop mail . can you get it to turn off by its self when done using the connection rather then checking mail and staying on untell you manualy turn it off?
GPRS normally only charges by data throughput, so having it connected shouldn't cost you anything.
However, given the number of loose programs that like to heartbeat data, you can (if not already available) use the reg hack to show the GPRS disconnect button, press and hold the red key, or use VJVolubilis to disconnect GPRS.
V
I've got the disconnect button already but I have trouble reconnecting. I always seem to get the "cannot connect due to modem being disconnected" bubble appearing and can only go back online with a soft reset or using the flight mode off/on trick. Is there a better way?
Related
Hi !
Does anyone know how to disconnect a gprs-connection in PPC2003?
Clicking the network-sign just reveils a bubble with the status of my connection, but no sign of a "disconnect"-button.
I dont want to turn off my phone every time i want to disconnect.
Any clues?
Jabba
i have installed spb GPRS monitor it does the job and allow to check brandwidth consumption
how to disconnect
All u have to do is to press on the 'Antenna" icon then press on "turn phone off" it will disconnect gprs without turning your phone Off
Another dumb question I'm sure but heh thats what this place is for, so those who know can tell those of us who dont!
How do I turn of the GPRS element of the wireless radio but still leave the phone on. On my XDA 1 I'd dial up via gprs for emai/web then when I'd finished I'd disconnect, leaving the GSMN phone on in the background. with the II when I dial up via gprs the only way to disconnect is to turn the whole 'wireless radio' off then turn the phone back on...not ideal.
Or am I missing the point!
it's the same on XDA I with WM2003 ... you can press the red button for 3 seconds and the GPRS will be down leaving the phone running ... or you can use this nice s/w http://www.gb-soft.cz/XDAII/default.htm
Good luck ...
Turning off GPRS
To turn off GPRS Point and Hold your stylus on the O2 icon until your connection settings pop out and untick the connection.
Hope this Help.
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
1. Does it consume extra battery life if the GPRS is alawys on?
2. When I'm connected but not actively doing anything (upload/download), does the device keep communicating with the service provider? i.e. sending control information back and forth even when i am actively not using it?
3. If the GPRS connection is active, are there any chances my phone reception or the phone's ability to get a phone call/SMS/MMS is adversely affected? I dont want people not to be able to contact me or send sms/mms because my phone is always connected on GPRS.
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
1 yes like your phone use more power when you speak in your phone it use lot more power then not using it
2 a bit not too much
3 it should not
4 www.GB-SOFT.cz/xdaII should add some features
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
Mind you, I use an MDA I.
as far as I know, the only way to get off and stay off GPRS is to go to settings->system->memmory->running programs and close anything that might use it (mailbox, IE, etc...)
If the signal indicator says it's connected to GPRS, then yes, you are actively connected to the tower/cell network. Sending info constantly, I don't know?????
GPRS effecting other network connectiveity???? I've heard yay and nay and have no professional opinion. Personally, I have no problems recieving a call, sms, etc... while connected to GPRS.
As far as power consumption, I would assume yes, it sucks up power. I have noticed about a 15% increase in power consumption using the web for an hour or so per day as well as automaticly checking email once every 45 minutes.
I also recently discovered a beautiful little prog that I cooked into my MDA I OS. PocketNav. It allows you to switch programs, close certain ones with only two "clicks", or all the progs at once, etc.... Check it out!!! It will be worth your time (I don't know where to get it other than stephan's kitchen).
Good luck!
gsm and sms should disable grps while it's using the band
but not cause problems
there is also the program PHM task manager
which is pretty much a copy of the task manager in windows 2k and xp so if people know and like that then it's a good program
Dustoff said:
humayunl said:
Some questions about the "ALWAYS ON" GPRS connection in WM2003 (device = imate aka XDA II)
4. Once the GPRS connection is made, and i'm done doing my "thing", how do I disconnect? Cause currently I have no way of disconnecting.
Click to expand...
Click to collapse
Press and hold the Red Disconnect button for several seconds (Approx. 3 Sec) and it will disconnect.
Dustoff
Click to expand...
Click to collapse
He Dustoff,
Great stuff! Worked fine for me. Thanks.
Ronald
Dustoff,
Where is the Red dsiconnect button I am supposed to press and hold?
I am using WM2003 and after Iam connected, i havent been able to find any place where there is any disconnect option. in the connection bubble all i can see is that i am "connected" but there is nowhere for me to disconnect.
Can you please let me know where you find this disconnect option.
thanks
Red disconnect button
It is simply the red button of the telephone.
On another hand, if someone calls you exactly in the same moment when yours GPRS is fully active downloading something (a big picture, a long message, ...), you may appear as "unavailable"
Rudegar said:
4 www.GB-SOFT.cz/xdaII should add some features
Click to expand...
Click to collapse
Hi.
I have not tried the above software yet, but here is the problem I have...
I use Wi-Fi a lot at home and quite often keep the Wi-Fi on and use WiFiFoFum away from home. I have managed to set up my pay as you go GPRS connection. But whenever I'm away from a Wi-Fi network the GPRS connects and my applications then access the internet.
There needs to be an option of "not connecting gprs automatically when there is no Wi-Fi connection."
What I have had to do is change one of the setting for the gprs so it cant connect, and I have to change it back when I need it.
Switching from Wi-Fi to gprs can cost a lot if things connect without me knowing. It costs £3 for a months use of 1Mb.
Regards,
Ian Watson
creating a phantom connection, and "picking" it as default may be slightly quicker than changing the settings of you primary connection.
I think holding down the HANGUP/STOP button for 2-3 seconds is the fastest and easiest way.
interestingfellow said:
creating a phantom connection, and "picking" it as default may be slightly quicker than changing the settings of you primary connection.
Click to expand...
Click to collapse
I have found where I can stop it from connecting the GPRS if it cant get a wi-fi conncetion. Connections icon on the connections tab, then the advanced tab, then the select networks button - "programs that automaticall connect to the internet..........". I have changed this from gprs to my isp.
Ian
Anyone know how I can force my mini s to disconnect from GPRS after it has checked my email?
Si.
press and hold the red phone button (hang up) for about 5 seconds - you should see it switch from GPRS (small [G] icon) to 'GPRS Available' (large [G] icon)
I'd rather it did it automatically - so I can leave it alone all day and it will connect to check now and again then disconnect.
same problem here. is there a fix?
also when i have forgot to disconnect am i paying for gprs? or is it just any content i download?
cheers.
GPRS is paid for by data usage, not connection... so you can leave it connected (so long as nothing is downloading in the background!)
V
cheers vijay, but have you got a workaround for original question?
on my old c500 when i had finished getting mail it automatically switched itself off.are we missing something?
vijay... unfortunately, at least on my Qtek 9100, there's always some data sent.. very infrequently, but over a day of no activity, the GPRS Monitor application that came with it reported 200KB traffic. So I always make sure to disconnect regardless
ZeBoxx: it doesn't surprise me. At least in theory, you only pay for data transfer on GPRS, not time connected like on dialup. However, I think activesync is an unpredictable beast at bet. I never use GPRS - so for me, to ensure I'm completely disconnected I use a dummy grps account.
futuresbright: I'm working on a set of such tools, but I believe there's already a command line tool to disconnect GPRS. I haven't made one yet that will automatically disconnect after checking email. I have to work on a related app, so I will try to look into the question, but I can't promise any time frame I'm afraid
V
Yeah, the monitor comes with a little icon on the Today Screen with which you can explicitly enable/disable GPRS as well. So obviously it can be done by external software
GPRS disconnect on O2 XDA mini S
If I tap the GPRS icon on the top bar when I have a GPRS connection up, I get an option to disconnect it (and it works!). I too don't like the thought of racking up data calls even though it is supposed to be packets switched not circuit switched.
no worries vijay,thanks for your time.
will just have to remember to switch off manually for now.
I am not sure if this is even a problem, but before today my data connection to t-mobile would only connect when needed. For instance, if I was home then I would be connected to wifi and my data connection would turn off by itself, but would still connect if needed by a program, or whatever, that can't use wifi but needed the data connection instead. Like when I sent a MMS message for example. Then after the message was sent or whenever the program was done with the data connection then it would automatically disconnect where I would continue to use the wifi connection. Also, if I left the house then I would automatically be switched to the data connection as the wifi signal went out of range.
This is the way I liked it. Today it had changed the way it behaves. Now, the data connection stays on no matter what and I have to manually turn it off in the comm manager. Also, everytime the screen turns off and the device goes into sleep mode, or whatever you call it, the data connection automatically turns backs on while it is sleeping. For example, when I go to sleep I press the red hang up button to put it in sleep mode then I go to sleep. When I wake up in the morning the data connection is on and when I go to turn it off it shows it has been connected for however long I was asleep for.
Like I said I am not sure if this is a big deal or not, I just don't want to be charged for going over the data cap for some reason. And I am not sure if maybe there is a program in the background that might not be showing up in the task manager and is downloading data that will eventually cost me when it goes over the cap.
Now I know that certain things automatically connect to download data like mail, weather, stocks, twitter, etc., but I always thought that they could use a wifi connection if available. And if not then I know for sure that it used to at least disconnect the data connection after it was done.
I am basically asking if this is normal because it used to not be like this on my phone and if it is something I need to.be worried about? Also, if anyone knows how to change it back to the way it used to be? I would greatly appreciate it if you let me know how to do it.
Thanks,
Michael
Anyone?
All I want to know is if it is normal to always have the data connection on. So does anyone else experience this? The data connection seems to reconnect by itself everytime the phone goes in standby and stays connected until I manually disconnect it.
Thanks,
Michael
Hey I just happen to have similar problem with the data connection turning on by itself when I check email on my wifi.
If you goto comm manager - menu - connections - advanced
Under "select which networks are automatically" - select networks
Change the connection type under "programs that automatically connect to the internet..." to your wifi connection from "t-mobile data."
Seems to work for me at the moment anyways. It's not connecting automatically to data connection when I check my emails.
Hi Michael.
It's actually the default behavior for the data connection to stay on once it's activated, until it's switched off manually. You won't pass significantly more data that way than if you just turned it off right after whatever app(s) are doing using it...the only downside to leaving it on is the speed at which it drains the battery.
There are some users who choose to leave it on, just to avoid the delay when they want to use it, and there's probably tons more who don't even have any idea you might want to turn it off when not in use.
Now I could swear there's a cab floating around here somewhere that will shut off the data connection once it sits idle for 60 seconds, but I didn't turn it up in a casual search the other day, so I can't point you to it right now
As for the apps using wifi when it's available instead of calling up a data connection, every one you mentioned should do that, and those all behave that way for me...so maybe there's something else you haven't thought of yet that ignores wifi when it connects to update or whatever. I would start by turning off auto updating for any and all of those services you listed, and see if the issue persists. If so, you'll need to dig deeper to find the culprit. Do you have microsoft myphone connecting to backup maybe? That seems to ignore wifi on my phone, I'm sure there's other apps that do as well.
Today it actually quit doing it for some reason. So I have no idea why it did that for awhile. Now I read that some people were having the opposite problem, which was that they couldn't get their connection to stay on. Now, this is actually the way I want it. Oh well, I hope it stays this way now.
Thanks for your help,
Michael