Ok...I set up an account with web2mail's exchange server...i upgraded to summiters 2.17 rom to enable push email.....and it all worked great up until now(a good month at least). Out of nowhere I couldn't sync with the exchange server over gprs but it would work fine when i was syncing through usb or was connected to the internet through 802.11. It says synching folders and then stops and just displays the last time it synched through other means, i click to check the status and get the error code 0x80072f17. I have checked my gprs settings and have no problem accessing the internet through internet explorer. I noticed another odd thing...I soft reset my device and my recent programs were still listed under the start menu after the reset, normally these would disappear. I though maybe i need to do a hard reset so I went ahead and upgraded to the 2.3 cingular rom on this site hoping that would fix it. But it hasn't, I have the same behavior with the exchange server and the recent programs list (not sure if they are related but..). Any help would be greatly appreciated.
Thanks
AG
DirecPush E-Mail works by maintaining a constant HTTP stream to the Exchange server. What might be messing you up is the Cingular proxy, which I believe might interfere with this HTTP stream.
If you haven't tried it yet, disable the proxy and try again. If you have, then I'm barking up the wrong tree.
Thanks for your response DonnieZ but unfortunately i have already disable the proxy and that didn't help. As an interim fix I have resorted back to XPress Mail and now I remember why I wanted Microsofts direct push to begin with....because it is terrible....
Has anyone else had this problem?? I don't know if anyone has a solution but I would feel a little better if i wasn't the only one with the problem!
AG
Update:
It appears that cingular has blocked encrypted connections on their media net plans because they want to charge you more for ecnrypted push email as they are releasing AKU2 this week.....just a heads up
had similar situation... resolved by selecting to use unsecure address for mail2web exchange in device, e.g http:// in place of https://
and unchecking "this server uses a secure connection" in activesync
hope this helps
Cingular, WM5, and SSL
I'm using SSL for my Exchange connection, using AKU 2.3 (Mr Clean), and Cingular.
Couple of points:
1. Mine works, so much for the Cingular SSL theory.
2. To use a SSL connection for Exchange, the ROOT certificate for the authority has to be in the trusted list on your device. For example, a root certificate for Equifax was in the list on the device by default, but the actual Equifax root that issued the cert for our ActiveSync site was not. I extracted that root cert and added to device before setting up sync, works like a dream.
3. WM5 does not support Wildcard certs by default. (*.mymail.pfm) To enable wildcard support, create the following value in the registry:
HKCU\Software\Microsoft\ActiveSync\Partners\{GUID OF SERVER CONNECTION}
"Secure"=Dword 0x000001)
The GUID should be easy to figure out, it will be the one with the values referring to your Exchange server.
Hope that helps.
Oops
My bad, the value for the key is "0", the "1" blocks it.
Sorry.
Might be your password! At work we have a 90 day lifetime on our domain pasword policy, when we get into the last 10-15 days of that password lifetime you get a message when logging into your PC that your password is expiring soon. When this happens, I have the same problem as the original poster, but, when I change my PW on the domain and then change it on my Wizard, I can sync just fine again. The only thing that I can think of is there is an extra bit of data coming down the pipe with the password exchange notifying of the expiration and it is messing with the sync. This has been verified twice with my account and once with a manager's xv6700.
mail2web ssl
I am using T-Mobile GPRS and free mail2web account. Direct Push and sync over GPRS had been working perfectly over the past months.
However, service quit last Friday or so (notice the date in ageezee's post!!!). Same here: Sync over 802.11 works with the very same server settings. Over GPRS only Error 0x80072f17.
Contacted mail2web service. Recommended restart, disabling of SSL and activating SSL again. Didn't work.
Got Direct Push and sync to work over GPRS after disabling SSL permanently. Might be a mail2web server problem. Still waiting for another reply from service.
Related
I can connect my device to the in-house Wlan and I get assigned an IP address like it should. I am able to browse the net (IE) using the Wlan and I can even go to the HTTP webmail site but when I set up a POP3 e-mail account I get the error message that I cannot connect with the current settings. Suggestions?
The other strange thing is that I am able to login on a local server using Terminal Services, but I can only connect to the IP address, not the hostname.
Perhaps I should mention that I have an own domain so the mailbox I'm trying to connect is a completely seperate mailbox and should work 'native' with POP3 port 25 settings. This shouldn't be a problem as far as I can see, but it still doesn't work...
I did some more testing, the weird thing is that I can send e-mails using the WLAN connection, but cannot receive them. The connection towards the server seems to be good (I didn't use seperate settings for SMTP) so DNS seems to be correct as well.
Right, I'm not under the impression a terribly large population of users are dying just to solve my problem, but since I located the source of the problem I thought I'd post it here for other users to find.
The problem I was faced with had actually nothing to do with the WiFi at all, it was the POP3 server that was the problem. The connection was fine, sending the mails was fine it's just that the POP3 daemon of the Direct Admin hosting control panel (vmpop3d-e) is unable to work with Windows Mobile 5 due to some kind of problem I don't even begin to understand (nor would I want to).
If you have your own domain and your hoster is running the Direct Admin control panel you won't be able to use the e-mail POP3 function. Instead, use the IMAP4 function which does work.
DA Forum PDA topic
when you set up your mailbox (menu - tools - options) go to the 3rd screen and click options. There you tell it what connection you want. I'd be willing to bet thats where your problem is.
E-mail client doesnt work on my wizard eather. I can receive mail, but sending it is impossibl. I think I tried everything.
If anyone have any suggestions what can I do please tell me.
THX
@primossz, you're pretty active on this forum :wink:
You need to first install the client software provided by your're ISP. So if you use T-mobile you can let T-mobile send the parameters via SMS to yor're cellphone. Just login to your're ISP provider for that on the WWW.
Greetz ET
My company runs an exchange server for email, and I was wondering if anyknow knows how to connect to them, using the mogul. I went through the setup on the phone, with no success...Are their any additional steps required to connect to the server when you are not on the same network as the server?
Missing Certificate ?
I think you'll have to install the certificate from your Mailserver on the phone to get it working.
Do you get any active-sync error code when you're trying to sync ?
In general you get an error-code in ActiveSync which is telling you what's wrong...
IMHO the best idea would be: aks your IT-Stuff in your company
you need to add a server in active sync with your companys exchange server addy and your username/password
To be clear you need to enter your companies OWA server address. At most small companies this is your Exchange server and at most large companies it is your ISA server.
Example:
You access OWA using https://exchange.mycompany.com/exchange
You enter: exchange.mycompany.com in the activesync settings and you use your username, password and domain to authenticate
You also need to make sure Outlook Mobile Access is enabled on the Exchange Server and on your Exchange Mailbox. You will need to contact your IT Admin to verify these settings.
I'm in the same boat as the OP. I had been trying to hit the mail server directly or via VPN, with no luck, probably due to no certificate. Never thought about OWA. I set this up as indicated in the prior post, and checked 'Tasks' only (just to run a quick test), and it sync'ed fine. I then checked email and calendar, and now it takes me to a company sign-in web page (same page I encounter when using web access to OWA). Weird thing is the page is in the ActiveSync window and does not appear to be rendering correctly or completely (e.g. no 'submit' button). Nonetheless, I sign in and click where the submit button "should be" and the page goes away and it appears to start syncing, only to take me back to the sign-in page again after 15-20 seconds. Any suggestions on how to get past this point? I've tried logging in to OWA from IE, but ActiveSync still brings up this sign-in page. And yes, I've got my userID, pswd, and domain properly set up as well. Thanks.
BTW, my company IT won't help because they only support handheld access for specific company-issued devices.
try using mail.yourcompanymailserver.com/oma
its a lightweight version that handles easy in mobile browsers (only if your IT guys have enabled it)
as for the OP your exchange settings could vary depending on how your admin set it up, ssl (requiring a certificate) or not. to get the certificate from your company you can dl it from the server mail.yourcompanymailserver.com/cersrv
you log in using your mail credentials and you select download certificate chain and select a der 64.
save it to your phone and just install.
chances are though if your company is using a lot of treo's they dont require ssl because you can't install self issued certificates on them (good work palm). so if you want to ask your IT guys their setup and post it here i can try to walk through it with you.
this is my situation and how i got it to work.
Although i tried to internal address of 1x01po2s.domain.name, that didn't work.
I thought about it for a while, and reasoned if i can access my companies exchange server outside the network through a http://mail.domain.name address, then maybe that'll work hahaha
BAM! it did and now it works perfectly fine. Conincidentally, since i started trying to get this going last week, i emailed a few guys i know and the last one who got my email (it was forwarded to try to solve the problem) said that because of security policies, i am not allowed to do this. Ooops!
Here is a quick run down of my settings:
server address: mail.domain.name
ssl is selected (checked)
username: exchange/nt workstation login name
password: user password
domain: network domain (we have different domains)
save password is selected
under advanced you can select whatever options you like
next select e-mail, and any other options you want
and you're done!
I also enabled the push email icon and get my email regularly on my phone throughout the day.
Well, i hope that this helps some of you out.
server address: mail.domain.name
Click to expand...
Click to collapse
just so folks know there is no standard for this, its whatever subdomain your company decided to put OWA on, for my company its webmail.companywebsite.com
best thing to do would be to ask someone in your company how to access email from outside the office using internet explorer, thats the address your lookign for
Sprint mogul (Titan) WM6.1 Rom update killed exchange server activesync
(Sorry in advance for the long Email) I purchased a Mogul from RS about three weeks ago. For the first week, it worked great! I logged into my company exchange server down loaded and synced email, cal,contacts,tasks ... was very excited. I also got very excited when I started t read threads in this blog .... it seems like there are some pretty smart members maybe someone can help!!
Noticed that there was a new Rom (Sprint TV and improved connection) installed the ROM.
Have spent endless hours with HTC technical support, sprint technical support (not an appropriate name). At times managed to get the email to load but never again Cal, Tasks, contacts. Always able to get sent emails to load (by checking option) . I'm left with a couple of alternatives (any others would be greatly appreciated (actually I really like this phone but I need my email,schedule,etc to work) The error is 0x8503001C there is no exact description about this from MSmobile it seesm to be an awh**** code. Searching on the web provides 1000s of hits unfortunately not just my issue.
o Go to an early Rom WM6.0. So far it seems like to do this I need to unlock the phone then flash the earlier rom?? Since no SIM card I need to hack the registry?? There are several products out there which is best (I do not mind paying for somethng that works well). I down loaded several "Oficial ROm versions ... unfortunately did not write down the number of the one the phone came with.
o Find some way of getting this thing to work well to keep the extra features
o My grace period ends in a week ... cancel with Sprint go to Att but there is not a 3G phone I like ... only Iphone ... it has issues for exchange server??
o I got my wife a Touch at the same time (it runs WM6.1) same issue. Downloaded once my corp email no cal, etc.
o I was told that this Rom was cooked up by MS & Sprint what a disaster
Please, please help ... Thanks in advance
Scurfer
Exchange email and Skype not working after Upgrading Sprint Touch to Wm6.1
The Exchange activesync died at connection and never can sync my company emails after I upgraded Touch to 6.1 Sprint/HTC ROM. Skype also does not work, no sound after first ring, even with 2.2.0.45. I like the GPS and Rev.A speed, and do not want to risk downgrading the ROM. Anybody encounter ssimilar situation?
I have searched and searched for an answer to this problem and have not been able to find anything. Hopefully someone here has run into this before and might have an idea or solutuion. Her is my problem.
I have two exchange servers (2003 SP2) on of which is a front end server handling OWA and OMA. We sync about 18 Windows Mobile 6.1 devices over the air using OMA. We are using SSL. All of our devices have random problems connecting to the server. They will sync fine most of the time but will randomly for no particular reason ask the user for their exchange password. We are not enforcing any password policies on the server and we are always checking the box to save the password. In order to get the device synching again the user has to re-enter their password multiple times and often has to kill and restart activesync on their device.
Any ideas as to what might be causing this?
Any help would be much appreciated.
You could try unchecking the box in Activesync on the phone that requires SSL. We use SSL as well, but we have to uncheck that box on the phone. Although our problem is that the phone never syncs when its checked as opposed to your problem of randomly not syncing and asking for a password.
Unfortunately that is not an option. Our SSL is required for authentication. It will not connect without it. It seems like what is happening is that the device is not always passing the credentials to the server. Usually when it asks me for the password I enter the password once making sure I check the Save Password box then when it asks me the second time I hit cancel. ActiveSync then gives me a could not authenticate error. Now if I just hit Sync again it goes through and works just fine without asking for the password. So my guess is that it is not passing the credentials until after the connection is reinitialized.
From what I understand, Push Email relies on the OMA functionality which uses IIS. The problem my lie there. Although I've never tried, you may have to uninstall/reinstall (or confirm) that the OMA part of Exchange is functioning correctly. Sorry I can't be of more help.
Do the log files on the server show anything when a phone can't log in?
No, the exchange logs don't show much. I almost think it might be something with the device configuration. At this point I just don't know. We will be migrating to Exchange 2007 sometime in the next few months. Hopefully that will resolve the problem permanently. I was just hoping maybe by some chance someone here had seen this problem before. Thanks a bunch for your help.
Is the FE server doing the authentication (NTLM) or is there an ISA server in the way configured with Forms Based Authentication? You should make sure the IIS virtual directory for OMA is set only for Basic Auth - and the following article might be worth a read.... http://searchexchange.techtarget.com/tip/0,289483,sid43_gci1188440,00.html
Hope that helps - good luck!!
Mark.
^^^What he said. Took the words right out of my mouth. You'll still be secured through the SSL certificate, even though you're doing "basic auth" you aren't exactly sending your password as clear text. Requiring SSL on the OMA site will automatically encrypt the connection so you have no need to worry.
Try it out and get back in here. I manage a site with about 50 WM 6.1 Black Jack II's that sync with Exchange 2007 with no issues whatsoever. Also verify that you have all your hotfixes related to OMA installed on your Exchange 2003 server.
I'm an IT guy and I just got into smartphone PPCs for the first time after a long-time hiatus from PDAs when I used to be a Palm owner. After my last palm, a LifeDrive, got stolen I moved to a Moto Q wich was a big dissapointment OS wise, and I never really got into modding it or anything, just set my POP3 e-mail server and used it like that for 2 years (draw back was that I didn't have contact sync nore internal e-mail sync that got handled by my exchange server). My contract with that Q expired and I made the move to a Sprint Mogul with WM 6.1 Pro and I'm NEVER LOOKING BACK!!!
Anyways, enough about me, this is my first contribution so I wanted to do the little intro.
I had searched around a bit about how to get ActiveSync to sync my company's Exchange server through PPTP VPN (we don't have it published with a certificate for an actual push config) but all I found was info on how to setup the VPN itself, being an IT guy that was like pointing out the obvious to me as I had already got that running and connecting but couldn't get anything but the OWA site opening in IE and Opera.
Basically what I figured out was that I had to program a work URL exception in the Connections control panel under the Advanced tab. There I added my exchange server's IP address as a URL and used that IP to program the server under ActiveSync with all the usual credentials. I can't configure it to receive as items arrive, instead I had to let the configuration run on a 10 minute schedule. Every time the schedule is up I see the VPN connecting pop up and it syncs PERFECTLY and disconnects the VPN. (It doesn't turn on my screen each time, it just pops up if I'm using it; but that pop up can be turned off if it gets to annoying).
I don't know if anyone else knew about this but I though I'd share this info as I searched for a few days and found nothing, ended up figuring this out myself. If this is new info I'll post more detailed configuration information for those who desire it.
BTW, this is working over the Data Plan and WiFi as well.
Wow. your a god...
I been trying to figure why it kept disconnecting the vpn when it synced up.
Adding the work url exception works perfect...
(Im using WM6.1 on a Samsung Omnia)
Many Many thanks!
No problem dude! I'm surprised no one else has really found this helpful. Glad I could help!
BTW, those exceptions work very well for internal web sites as well. I use it to log in to web-based management consoles such as Symantec's Mail Security for Exchange, Symantec Endpoint, basically if you got an internal website of some sort you can access it through VPN using a Work URL Exception.
I was looking for this info too, i would like more detailed configuration information about this.
Thanx in advance...
Roland hendriks
What part of the configuration are you having trouble with? Configuring the VPN, the Exchange Server or the URL Exception?
Thanks
I personally am thankful for your information. Even if none of the other 1000s of readers out there say anything...
Thank you for sharing your knowledge.
Tim
Glad I could help! I know I broke my head over this one during the first week of me having a WM phone. I figured it out thanks to the Fdc Soft Task Manager using the Netstat utility. It let me know exactly what the network stack of the phone was trying to do and the URL exclussion I just stumbled upon and reading what the page said it lead me to believe that it might be a routing table for configured "WORK" connections. And it worked.
During the past month or two of using my exchange like this and switching around ROMs and cooking my own ones now I've noticed that having TCP Data Reconnect and Transmission Retry settings in your registry set to high will cause Active Sync to take a long ass time for it to actually route communications through the VPN connection. I noticed this after using custom ROMs wich some have these settings increased to ensure communications go through but they raise connection timeouts way to much. On my own custom ROM I've set these to defaults (2 and 4 respectively) and Active Sync only takes about 1 minute to start syncing onces you hit sync while you wait for it to dial the cellular line and the VPN.
you talk about the vpn..
i think you are in the very small percentage of ppl who can get that to work.
i have the activesync set to manual and have tried the vpn type to both IPSec/L2TP and PPTP
w/o success..i always get a UN PW error which i know cant be so..
i set the host ip to what was shown from "whatsmyip"..
searching for quite awhile, i see thousands of ppl who cant get it to work and have
never found a reliable method that works for anyone but the person who posted it.
if you could back track a little and post how to do it, there are probly
thousands of ppl who would find it very useful and really appreciate it.
thanx
Well one thing is how to setup a WM device's VPN client to connect to your VPN server and another is actually configuring your VPN server. Do you have a working VPN setup in your corporate network already? This usually is setup by having a static IP assigned to your corporate internet connection and a firewall configured to allow VPN access with all the necessary traffic and authentication routes.
If you don't have a static IP in your office and use a lower cost DSL or Cable connection you aren't SOL, for these types of connections you can use a service like dyndns.org to dynamically upadate your dynamic IP into a static dns name like: mycompany.dyndns.org for example. This requires you to setup your firewall or ISP modem to communicate with dyndns.org to report the changes. Most firewalls come with this funcionality already built-in, but most of them also call them by different names so you'd have to look up your equipment's documentation on how to report a dynamic dns service.
I would be happy to help you setup your VPN correctly but its more practicall for me to help you setup a checklist on which type of VPN you want to setup (IPSec or PPTP) and what your corporate network's infrastructure looks like and let you know what to look for in google; there is PLENTY of very helpful information on the web on how to setup VPN but first you have to know what you need and how you are going to achieve it and then you'll know what to look for.
Each setup is very particular to the customer's needs and the network infrastructure that is setup and how much security you want to use (IPSec is a naturally secured VPN tunnel protocol while PPTP is not secured by nature but can be secured with a Radius server in your DMZ validating authentication in an encruypted manner to your Active Directory service).
What I posted above will work for an already existing and working PPTP VPN connection wich I already had running for years in my office and I regularly use with my laptop to connect to my exchange server while on the road or at home. What I posted above is what is need to get your WM device to connect to an already functioning PPTP VPN server.
Hope this helps. And if I'm to help you make a checklist I need a lot of information:
Type of ISP (static IP or dynamic IP)
Type/Brand of firewall device
How the devices are connected together (dumb modem or internet router from your ISP to your firewall's WAN port or a full blown router provided by your ISP wich is patched into your firewall's WAN port)
Internal network configuration (both AD and Exchange on same server (SBS) or separated)
What amount of security you are looking for.
Send me some PMs and maybe I could at least point you in the right direction.
nttdemented: I'm doing the PPTP shuffle at the moment, and wanted to pick your brains..
The basic connection is running fine - e.g. when I add 192.168.0.1 as an Exception and go to http://192.168.0.1 in Pocket IE the VPN fires up and I see the page just fine.
I've also added '10.6.1.8' as an exception, but if I go to that address in PIE, I don't see any network activity (using ethereal/tcpdump) on the 'ppp0' server interface (I use Ubuntu server's pptpd) ...
Can I assume that your Exchange server is hosted on the same machine as your PPTP server? Some MS SBS or similar?
Even if I configure an http proxy (on the 192.168.0.1 IP) I see no activity when I try the 10.6.1.8 address. :/
thanks so much!!
that i didn't find/read about the "exceptions" option in WM before...
Somehow, when i got my phone, i got it to work without this workaround, it just worked, out of the box, no exception setting required. (VPN settings + exchange server location were enough)
But yesterday, from the one moment to the next, it suddenly stopped working.
In my efforts to get it to work again i deleted the exchange settings, but doing that, I deleted all my contacts and my agenda! I was in big trouble because I really needed those , but after reading your post, i got it working again! my phone is synching "as we speak" and i'm very happy!
don't know how it worked before, don't know why it stopped working, all I know is, it's working now!
you made my day
Good to know!
Cheers!
I've since stopped using this method as we got around to publishing our Exchange server with an SSL certificate so I'm actually using SSL enabled ActiveSync push on my phone now.
Excuse me but perhaps you can help me too.
My problem is that I can get/sync my mails using WIFI.
If I connect thru GPRS, y go to send/receive and I get all the mails. If I'm on my office and connect thru WIFI to the work net I also get all the mails from the exchange server.
The problem is when I'm outside my office and connect to other wifi net and try to sync my mails. I have an HTC TOUCH CRUISE with WM 6.1 original from HTC without any flash.
Thanks in advance.
VPN connection doesn't always connect for ActiveSync synchronization?
I have had ActiveSync working with an Exchange server over a PPTP VPN connection for years now, but there has been one nagging issue I can't figure out. For the most part it works, but sometimes when ActiveSync tries to sync it will not make the VPN connection. There is only one connection listed when I tap on the icon on the notification bar - the phone's data connection. So in activesync, the icon with the arrows spins for a while but nothing synchronizes. I think it ends up saying "waiting for network" or something like that. It seems to always work when I manually hit "sync", but sometimes it fails on scheduled synchronizations.
Any idea why this happens sometimes?
oh...cheers...got my brain back...
The exceptions rule has almost fixed mine now. I'm getting mail but not through Activesync (just sits waiting for network).
Morning - looks like I am one of the few in the Uk to have got my Nexus - arrived yesterday morning complete with engraving on the back.
As an aside the DHL tracking on the web still shows as only "shipment details received"!
The reason for my post is getting email from my Exchange server - it all works fine with my iPhone and Hero, but when ever I try to connect with the Nexus I keep getting "Setup could not finish - Unable to open connection to the server"
I have tried Touchdown and it is also upable to get the activesync profile from my server! gets a Error 500:
Is there something simple I am missing? I am able to browse the wen and get my gmail on the device but no exchange!
Any help would be great
Thanks
John
I have been able to use both the Android mail connection & Touchdown to connect to my hosted Exchange server (2007) using SSL, I guess as you have connected from other devices you must know the settings of the server.
Are you connecting via Wifi or 3G ?
Shouldn't make a difference, but which carrier are you on & did you get the 3G correct ?
Can you connect to the server on OWA via the browser ?
Good luck
Working fine for me, have you tried playing around with the settings? E.g. mine doesn't work unless I've checked the SLL box (but not the accept SLL certificates box), and make sure you precede the username with domain\
tried on both 3g and wifi - both no joy
just been looking for roadsync on the market and I don't appear to have any paid apps either...
been using an O2 sim just putting my orange sim to see if it makes a difference but doubt it will as wifi doesn't work...
stumpted!
I originally had a problem connecting with the native activesync with a similar error, however touchdown worked fine. I would try touchdown quick config and see if it can figure it out. You also might need to look at the certificate options under touchdown. Forcing that might help.
I have tried again with Touchdown - and managed to capture these results from the log:
I have reset my hero and reconnected to my exchange server and it connects fine...
I have called HTC to arrange a hardware replacement but the guy on the phone didn't seem to know what he was doing.
Checking Certificate...
Checking ActiveSync with SSL...
ActiveSync location returned HTTP code 500 : ( The request was rejected by the HTTP filter. Contact the server administrator. )
ActiveSync Version :ActiveSync ERROR :500
Trying activesync protocol 121...
ActiveSync provisioning returns HTTP:400
Error provisioning ActiveSync: Policy status is 0
Trying activesync protocol 2.5...
ActiveSync provisioning returns HTTP:200
ActiveSync provisioning success
The following policies have been requested :
- Allow Simple password
Refreshing AS folders
Error refreshing folders
Socket is not connected:Exception performing request
ActiveSync version check returned negative, but still trying for 12.1
Checking 2007 with SSL...
attr value delimiter missing! (position:START_TAG <HTML dir='null'>@2:11 in [email protected]) for operation: Subscribe-> Error renewing a subscription
Socket is not connected for operation: Subscribe-> Error renewing a subscription
Checking 2003 with SSL...
Checking 2003 without SSL...
Socket is not connected:Exception performing request
Would welcome any help from someone wiser than me
Cheers
John
How did you capture the log from Touchdown?
I'm using Touchdown here as well and have no issues to speak of. From what it looks like it might be something server-side?
Quick connect in touchdown captures the log as it tries to connect.
I agree it all points towards a server issue, but what is different between the nexus and the hero? I have reset my hero and reconnected with the standard android active sync connnector and it works fine. I use a neuxs with the exact same settings on either touchdown or the android connector and it fails!
It is driving me mad - I have synced my outlook contacts with my gmail account so I at least have numbers etc. but without email this phone is going to end up on ebay real fast
John
Not sure, but have you set the simple password in Touchdown? It looks like that is a required policy and if touchdown doesn't report back that it is set you won't be able to configure.
because the hero doesn't support the simple pin I got my exchange admin to remove this requirement for me
An even bigger thing for me was the lack of Exchange Calendar Sync on the N1. Seems a terrible omission when the Droid/Milestone supports it without trouble.