Related
What i'd like to do is assign more than 1 binding to the outlook button.
Exactly the same as the "voice dial" one has as standard (press for voice dial, hold for voice memo)
What i want is (on the mail/outlook/text button) press to open outlook, hold to start new text message.
Is there a reg key to change to allow this dual use?
If not (and i'd rather not add more software to map buttons) what software will allow this? Multipress isn't really an option, as pressing the button again now will cycle through the different text settings (sms, mms, e-mail etc) and put you in whatever folder you were in last (inbox, outbox etc)
EDIT:
While i would still like to be able to do this, thanx to vijay555 who's phone tools 2 lets me start a blank sms from a today screen .lnk file
The only way to do it is using Vito Button mapper.
Button mapper supports macros as well.
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
carphead said:
The only way to do it is using Vito Button mapper.
Click to expand...
Click to collapse
I had to hard reset my Qtek9100 after Vito Button mapper installation, so I couldn't recommend it...
uppps another one ?¿?
Regards
vijay555 said:
Beeble
Have you read the thread about putting VJSMS on the softkeys, to start an sms straight from that key..
I'll have another related release that you'll hopefully like, coming soon.
V
Click to expand...
Click to collapse
I'll search some more later and keep an eye on your site!
Vito Button Mapper works here, but after a soft reset I get a popup message saying a certificate is missing.
Also, after installation my backlight was turned off. Went to settings and restored it and all works fine now (also after a reset... only problem is the popup)
Vito Button Mapper screwed up my softkeys.
Only in the 'Today Screen' however thats were a couple of my most used buttons were.
Now they don't work and sometimes change?
I would urge you NOT TO USE if you want to use soft keys in Today screen.
Robin
Soft keys can be configurated in the app, that is why you lost them for now...
Reconfig them:
Start -> Settings -> Buttons
Configuration drop down -> Today
Top 2 entries: Left softkey & Right softkey
Well yours must be different to mine.
When I open buttons the only choices I have are for the 5 hardware buttons.
No other choices are available????????
Robin
What is the action you usually take on your device? I guess tapping Ok/Close button.
It's smart to assign this action to an hardware button. But for almost PPC Phone Edition WM2K3, there are only 4 hardware buttons can be re-assigned by users and you dont wanna waste any button to simulate Ok/Close button.
Now, you can use the red phone button to do that beside its original function. It means: if you're having a phone call or a GPRS connection, pressing the red button will hang it up, if not, simulate Ok/Close button. I know that on some devices (e.g: XDA Mini...), the red phone button is used to quick minimize running applications also (e.g: you're opening Inbox Options, press the red button will go to Today screen directly without closing Inbox Options). I don't like this feature at all. I prefer using it to simulate Ok/Close button. So I've developed the tiny utility named "Red Button Remap". It has no GUI, no registry read/write. It has 2 files (total size ~11KB). It's just install then soft reset.
This utility is very useful for me so I posted here for someone like it.
I wrote it for my XDA Mini. I'm not sure about other device but it should work properly on WM2K3SE (phone edition only).
Red Button Remap version 0.1 beta:
- Re-map the red phone button on some WM2K3 phone edition devices to simulate Ok/Close button (REMEMBER: SIMULATION means it does nothing without the Ok/Close button appearance).
Will this work with WM5?
Can I assign a file to the red button instead of Ok/Close?
Thanks,
msafi said:
Will this work with WM5?
Can I assign a file to the red button instead of Ok/Close?
Thanks,
Click to expand...
Click to collapse
Sorry, I dont know much about WM5 and I have no WM5 to test. It may not work on WM5. However, you can test.
i installed it, hoping it might fix my PocketNester problem, but the software doesn't seem to have modified anything in my system. the Red button works as usually, i.e. it takes me back to the 'Today' screen.
msafi: what is your nester problem?
v
hi vijay555,
thanks for asking.
here's my PocketNester problem
and here i make a request in the forum and provide some additional information
msafi said:
i installed it, hoping it might fix my PocketNester problem, but the software doesn't seem to have modified anything in my system. the Red button works as usually, i.e. it takes me back to the 'Today' screen.
Click to expand...
Click to collapse
I just say: the program does not work on WM5 devices.
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Doesn't work on WM5 based HTC Wizard.
bartito said:
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Click to expand...
Click to collapse
Pls read the program introduce again.
Pressing Red button will simulate Ok/Close button like tapping Ok/Close button (at top-right conner) by stylus. So Red Button Remap does not concern "real close" or "minimize" running apps.
I don't think that Red Button Remap conflicts with Pocket Plus. Could you explain in detail?
dasdoenertier said:
Doesn't work on WM5 based HTC Wizard.
Click to expand...
Click to collapse
OK, now, I'm sure that WM5 is not support.
Pocket Me said:
bartito said:
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Click to expand...
Click to collapse
Pls read the program introduce again.
Pressing Red button will simulate Ok/Close button like tapping Ok/Close button (at top-right conner) by stylus. So Red Button Remap does not concern "real close" or "minimize" running apps.
I don't think that Red Button Remap conflicts with Pocket Plus. Could you explain in detail?
Click to expand...
Click to collapse
ah ! ok
is possible forze the application close (when i press the red button) or that is impossible?
in my opinion this capability is more useful...
thank's
bartito said:
is possible forze the application close (when i press the red button) or that is impossible?
in my opinion this capability is more useful...
Click to expand...
Click to collapse
That's possible. I'm trying develop the next updated allowing "single press" to simulate Ok/Close, "press n hold" (or "double press") to stop running app.
hi,
i have try to install and use your app another try...
but i not sure what's the difference of the redbtn function.
in ocasions the redbtn click minimizes the app's (example: calculator, configuration plug-ins...), but in other ocasions, the application is not minimized (example: message boxes or superalert config app).
the same occurs if your application is running or not...
my phone is s100 and i use with pocket plus (with the x button click configured to close apps)...
thank's
On my Magican it closes two windows (if there are opened 4 windows after RedButton remains only 2) :-(
With the Wizard I used VJOKButt with the IE-button so that I could close programs and dialogs without using the stylus.
The TyTN/Hermes has it's own OK button(s), and I was wondering if anyone knows a way these buttons can actually close (or be reconfigured to launch VJOKButt) programs?
I've already tried AE Button Plus but couldn't set a custom action for the OK button (allthough this might be because I didn't register the program)...
Any tips would be apreciated!
Moskus, if I ever get my computer working again,
http://forum.xda-developers.com/viewtopic.php?p=345461#345461
I may try to build such a feature in to VJOkButt, but I'd rather people be able to use their own button mappers. However, if AE Button plus doesn't do it, then I may try to build in this feature.
V
AEB Plus
Actually it does work, you just have to add it as a new button (menu | add button). I've got my OK hardware button mapped to ok/close for one press and close front application for a long press.
Steven
I certainly would love it if is was build in to VJOKButt, Vijay!
I guess I'll try AEButton again (for now). Didn't see that "Add button" feature.. :wink:
EDIT: The AEButton finds the hardware OK button, but the combination of VJOKButt and AEButton won't close the application, just minimize it. :?
With AE Button Plus 2.4.3 beta and upwards, you can capture and map the "ok" and "windows" buttons. Have set mine to close apps with 2 depresses of the "ok" button.
can it be done by tweaking some of the registry rather to instsall some of the 3rd party program?
Hmmm... I should have investigated some more. Now it works!
PQzII let's you map any button on the hermes (and universal) to anything you want...it is really great. It has an option to make the ok button a 'really close button' and much more.
http://www.nicque.com/PQz/PQzII.htm
You can find out a lot about it in this forum by searching for pqzII.
Hi All,
I'm trying AEBPlus and I tried to map the OK button the side to be "OK/Close" for one press and "Close active application" for two presses. however, the single press doesn't seem to work. Pressing it once no longer minimizes applications or funciton as the OK/Close button. In fact it does nothing. I'm using a CHT9000 with the Dopod English Rom. Anyone know how to fix this? Thanks!
Moskus said:
Any tips would be apreciated!
Click to expand...
Click to collapse
how about good old smartskey? it works in my Hermes, press&hold right softkey removes active window from memory.
Aye, but until it supports OK button it's less intuitive. The newest version support the OK button on the Prophet but this operates the PIE button on the Hermes. I've PM'd Water about it but no response
OK buttons NOT mappable under WM5..not through menus anyway!
bydandie said:
Aye, but until it supports OK button it's less intuitive. The newest version support the OK button on the Prophet but this operates the PIE button on the Hermes. I've PM'd Water about it but no response
Click to expand...
Click to collapse
I agree. On my HTC Prophet using Wisbar Advanced 2, I am able to map the 'OK' button to 'Close/OK' option of the Wisbar application, which did close all my programs etc. On my VarioII the 'OK' buttons are not mappable. Bummer!!
Try PQZII for me is fantastic, not only to close programs, you can map everithing...
How d'u use it this PQZII? Help!!
MAKBET said:
Try PQZII for me is fantastic, not only to close programs, you can map everithing...
Click to expand...
Click to collapse
Forgive my stupidity, but I'm currently using it, but haven't a clue how to get it to that for sure. It seems to work for some applications, but not for others. Any tips or guides for dummies like me :lol:
I'll join the dummies club too!
PQzII would be perfect if we could attach key presses of the same key to different apps like in AE button plus.
unfortunately, once PQzII captures the button, it overides AE button plus, meaning the 2 can't work together on the same button.
also found out that AE button plus 2.5 doesn't capture the windows button at all. Investigated back and found that only 2.4.3 beta did.
I dont know AEbutton so I dont understand why you want use both the programs. (note: also PQZ dose not configure well the win button) but you can configure any other button, eg: alt+left to close program (I put alt in internet button so if I want to close a program I press "internet program" and "left".
I've mapped my 'Button 5' (under settings/Buttons...) to 'Close/ok' of the Wisbar Advanced settings, which does close everything. Just until, as bydandie said, a more intuitive method can be achieved by using the 'ok' button.
in PQZII there is an option to make ok button to close, I dont use that option because I want to have some programs running down, you can try
MAKBET said:
in PQZII there is an option to make ok button to close, I dont use that option because I want to have some programs running down, you can try
Click to expand...
Click to collapse
How do you do that MAKBET? Please share. Details please. :wink:
My Atom Life has a Windows/Start button that by default points to the start menu. I, however, do not use the start menu that much. As a result, I tried to use AE Button to change the start button to no avail. Detail as below:
When I use AE button to add button the first time, it shows 00FC. If I map anything to this code, it runs well but the start menu also pops up.
When I use AE button add button the second time (still pressing the start button), it shows 405B. Mapping anything to this button (like task, note, etc.) works perfectly, except that the other buttons mapped by AE button does not work (damn).
I tried almost every combination of binding/unbinding but to no avail.
Is there a way to do it? I would greatly appreciate your help. Thanks a ton.
I got it
I tried the only thing I have not tried. I used AE Button Plus in addition to Vito Buttonmapper 4.0
1. Bind 00FC to another function (e.g. Ok/close)
2. Unbind 405B
3. Use Vito Buttonmapper to remap other keys.
Is there another way? Cuz both these things are kinda expansive.
testdasi said:
I tried the only thing I have not tried. I used AE Button Plus in addition to Vito Buttonmapper 4.0
1. Bind 00FC to another function (e.g. Ok/close)
2. Unbind 405B
3. Use Vito Buttonmapper to remap other keys.
Is there another way? Cuz both these things are kinda expansive.
Click to expand...
Click to collapse
try PQzII, is free. it's intended for keyboard type devices but also work on non-keyboard type machine. I recently helped a friend to install it on his Atom Exec. Now, he use the win button to launch task manager (from PQzII) & the mail button for ok/close.
http://www.nicque.com/PQz/PQzII.htm
I tried but did not work Cannot find the start button in the list. Thanks anyway. At least you tried to help.
testdasi said:
I tried but did not work Cannot find the start button in the list. Thanks anyway. At least you tried to help.
Click to expand...
Click to collapse
do you mean the button with the window logo that bring up the start menu? If yes, that would be "WIN" under the code list.
deadeyed said:
do you mean the button with the window logo that bring up the start menu? If yes, that would be "WIN" under the code list.
Click to expand...
Click to collapse
this tool should be mandatory in all ROMs omg.
Okay, I can see that I can assign long-press Send and End keys, but I want to assign a function to the Back key (short press) - can it be done?
since i come from trinity - which had the scrolling wheel - I'd like to replace the volume buttons with "almost equivalent" functionality....possible at all? don't know...
I'm not sure that Volume slider has been mappable on any of these devices. Previously I used SPB PocketPlus to map buttons, but on the HD the poplists in the setup don't work so I can't try it...
I am currently using AEBPlus to assign the buttons.I was able to map volume up, volume down and ok buttons to various functions.But unfortunately I am unable to map the HOme button.Can anyone let me know how to assign some functions for HOme button using AEBPlus please?
regards
vijay
Brilliant! AE Button Plus works perfectly, OK=Back. I love this site...
any way to get volume to be shutter release in camera mode?
truthseekers said:
any way to get volume to be shutter release in camera mode?
Click to expand...
Click to collapse
You don't need to ask the same question wherever you go and also create a thread for that!
ok
i see what you mean. I just figured it might not get read if here at the end of an older thread... hehe you mods notice everything ;-)
Can someone tell me if AEBPlus could reassign the phone on and off buttons too? I would like to use these buttons for other purposes and just use the screen to operate the phone, if possible.
eaglesteve said:
Can someone tell me if AEBPlus could reassign the phone on and off buttons too? I would like to use these buttons for other purposes and just use the screen to operate the phone, if possible.
Click to expand...
Click to collapse
Yes you can.
panosha said:
Yes you can.
Click to expand...
Click to collapse
Beauty!
Then I have no more issue with the lack of D-pad now.
panosha said:
Yes you can.
Click to expand...
Click to collapse
Could you explain how to configure to apply to on off button.
Aside from that, does someone know how to get "long" working?
It tried to give the "Back arrow" additional functions.
1,2,3 times work fine, but long does not.
Also what is the default action of "Back arrow"
I do not find it on the list? Which number
So I could configure 1 times with default action
and 2 and 3 with something else.
Home button on AE plus
Has anyone found the home button "name" in AU Button plus yet?
This thread mentioned the name for the "back"-button is "OK" in AE button plus and that does work. (except foor the long press option, that I could not get to work, but double tap works fine)
pzucchel said:
since i come from trinity - which had the scrolling wheel - I'd like to replace the volume buttons with "almost equivalent" functionality....possible at all? don't know...
Click to expand...
Click to collapse
pzucchel, I'm with you! I've realised that I actually used the scroll wheel on the Trinity much more than the D-pad, so AE buttons is a godsend!
I've got volume up/down to become arrow up/down, but how about the Trinity press-to-select on the scroll wheel? I can't get the long press on the vol buttons to work otherwise it'd be perfect...
What version of AEBPlus are you using?
I installed AEBPlus 2.6.3 to enable turning the screen while pressing the volume up button.
This version is a 14 day trail version, there is however a freeware 1.0.1 version but that one is not officialy supporting the Blackstone.
Which version are you using? I find $14 a lot for changing the behaviour of one key...
AEButton will NOT stop working after 14 days, and all the functions you really want will still be there
What is the difference between trial and registered version?
Two things only:
1. Splash screen appears during device starting up.
2. "Action list" is blocked in trial mode
Click to expand...
Click to collapse
http://ae.inc.ru/aebplusfaq.php
Good to know! Didn't see that when reading the website...
Anyway - is there an easy trick to assign the "volume up" pressed for >1 sec to rotating the screen to landscape (270 deg) and portrait?
/me is thinking of a registry tweak...
I just got a Touch HD and installed AE Button Plus and it works great for assigning different tasks for the button below the screen.
However I have not been able to find a which button in AE Button (if any) that corresponds to the Home button. Has anyone else here been able to assign any tasks to double-clicking the Home button?
tomasn said:
I just got a Touch HD and installed AE Button Plus and it works great for assigning different tasks for the button below the screen.
However I have not been able to find a which button in AE Button (if any) that corresponds to the Home button. Has anyone else here been able to assign any tasks to double-clicking the Home button?
Click to expand...
Click to collapse
There is an alternative: MobileMagic
http://forum.xda-developers.com/showthread.php?t=449654
Yerry said:
There is an alternative: MobileMagic
http://forum.xda-developers.com/showthread.php?t=449654
Click to expand...
Click to collapse
OK, I can see that you want to push your own solution but as far as I can see it does not support the Home button either. Also it supports a lot fewer actions than AE Button Plus does.