Hi !
I've just upgrade my 9000 with Rom 1.30.89 ITA
With the previous Rom I can move shortcuts in Start>Programs in sub-folders created by me (for example: PIE in a folder called Web)
But now i see the shortcuts (of the pre-installed applications in Rom as Word, Excel, Agenda....) in Programs are hidden files and I can't move to my customized folders, i get an error !
I have an italian OS and the error is "Accesso negato" (probably in English is "Access denied")
Same error when i try to modify the registry from PC with Mobile Registry Editor or Smartione.
What's up ? :shock:
Is not my first Pocket PC and with all my past device i always was able to move folders in Programs and edit the registry from PC, but now I don't know what can I do...
Anyone with this issue ?
Thanks :wink:
answer
cut and paste the shortcut icons. you will have to have any start menu aplications closed to do this. It will give you an error if you try to move those icons if you don't close those programs also clear out all the checkmarks under start-settings-menu. this should help
I had this issue as well on my Dopod 900. These files seem to be classified as System Files now and are hidden.
I was using Resco File Explorer and it could not see these files. But checking the box "Show All Files", the files could be seen and moved.
Using File Explorer though, I am pretty sure that it sees the files with no problems. You can move them but you get a prompt saying that this might cause some problems with other software. Just have to click OK and it moves it.
Hope this helps.
Re: answer
sandrobber said:
cut and paste the shortcut icons. you will have to have any start menu aplications closed to do this. It will give you an error if you try to move those icons if you don't close those programs also clear out all the checkmarks under start-settings-menu. this should help
Click to expand...
Click to collapse
Thanks sandrobber, I always close all the running application before moving the shortcuts and I clear all the checkmarks
@capkapak
You're right when you say "These files seem to be classified as System Files now and are hidden."
Anyway thanks for your suggestion, I can move files with TotalCommander also (not only Resco) and modify the registry with PHM RegEditor
Obviously both installed in my 9000
But i would like move files and modify registry from my PC....
Ps: This is strange for me, I always was able to move files with ActiveSync and modify registry with Smartione without any problems.....
Thanks guys for your replies :wink:
My unit has been freezing up after some use. When that happens, my TenGO input method reverts back to the default tiny keyboard, which of course is unuseable in true VGA mode. I traced the problem to the fact that my browser had stored lots of files within the device and caused the memory availability to fall, depriving it from the programs.
I changed these browser files location to the SD card, and my TenGo input method right away came back by itself. The system also revert back to the normal quick speed.
None of these ideas originated from myself. There are many websites giving these tips.
Changing the IE brower cache, cookies, and history location:
---------------------------------------------------------
The IE working files are by default located at :
\windows\profiles\guest\temporory internet files
\windows\profiles\guest\Cookies
\windows\profiles\guest\history
First, use Files Explorer to create these directories at storage card:
\windows\profiles\guest\temporory internet files
\windows\profiles\guest\Cookies
\windows\profiles\guest\history
Then Use a registry edit tool,go to
\HKCU\Software\Microsfot\Windows\CurrentVersion\Explorer\Shell Folders and change the Cache,Cookies, and History value to \Storage Card\Windows\Profiles\Guest\Temporary Internet Files,..... etc
If you prefer not to edit the registry directly youself, you could alternatively, use SKtools (I use version 3.1.5) to do the following:
Start SKTool, then click Tuning
The first tab shows the current location of the above. Change it to the new locations: ie
Storage Card\windows\profiles\guest\temporory internet files
Storage Card\windows\profiles\guest\Cookies
Storage Card\windows\profiles\guest\history
Exit SKtools
Switch off the device for about 20 seconds before doing a reset. It is important that you do not do reset right away else the registry entry may not be effected. The switching off will cause the system to write out the new registry entries.
With that, its done for Internet Explorer.
Changing the Cache, cookies, and history location for Opera Mobile
----------------------------------------------------------------
Ensure Opera is not running before you begin.
First,create these directories using file explorer:
\Storage Card\Application Data\Opera
\Microdrive\My Documents
Then, copy Cache4, cacheOp Help imgcss skin strtpage style directories to \storage card\Application Data\Opera.
After the copying is verified to be accurate, clean the content in the above directories in the device, but leave the directory structure there (with empty content) just in case.
Then, transfer these files from device to storage card by cutting these file from device and pasting to storage card
-browser
-chartables
-cookies4
-global
-htm40_entities
-opcacrt6
-opera.dir
-operand
-opssl6
-vlink4
Leave these in device directory :
-brwoser
-de
-englihs
-html40.entities
-input
-ja
-nl
-opera.ini
-opera6.adr
-pl
-ru
-zh-cn
-zh-tw Note: I think this list of languages differ from country to country. Notice that I've replicated browser and html40.entities in both location because none of the websites I read mentioned them. I leave them at both location to ensure it will still work, but I'd later on tried removing them from one location at a time to establish where Opera would look for these files.
Make changes to Opera.ini file
----------------------------
Initially, I tried to use Note application to open Opera.ini, but found out that it can't seem to "see" the file. Same goes for Pocket Word. I could'nt find the solution from other website, so I decided to use the desktop notepad text editor to edit it.
a) Establish activesync, on PC, use explore button to copy from device\Application Data\Opera to say the desktop.
b) Use the desktop notepad to open the Opera.ini file, and make the following changes to these entries:
- Opera Directory=\Storage Card\Application Data\Opera
- Help Directory=\Storage Card\Application Data\Opera\Help
- Button Set=\Storage Card\Application Data\Opera\skin\windows_skin.zip
- Download Directory=\Microdrive\My Documents
- Home URL=\Storage Card\Application Data\Opera\startpage\home.html
c) Then save the document as Opera.ini, and make sure encoding is UTF-8
d) Copy back the edited Opera.ini from desktop to the Device's main memory. i.e \Application Data\Opera
Its done.
I'll continue to monitor the device performance over the next few weeks and see if the freezing still happens.
Isn'teasier just to use the .cabs available for free from MoDaCo?
Confucious said:
Isn'teasier just to use the .cabs available for free from MoDaCo?
Click to expand...
Click to collapse
Hi confucious,
I'm not aware of a CAB that automates this. Could you post the link for the CAB?
Anything that makes life simpler is welcome.
PIE in this thread -> http://www.modaco.com/Pauland39s-must-have-FREE-Hermes-software-t243906.html
Opera here -> http://www.modaco.com/index.php?showtopic=253909&hl=opera
HTH
Hi
The attached file makes necessary registry changes to move Mail and Atachement storage to SD Card.
There have been a few cab installers available to perform a registry change, enabling storage of both Mail as well as Attachments on the Storage Card. However these solutions have the "Storage Card" hard coded as destination, which means if more than one partitions exist on Storage Card, manual changes would be required to the registry to use another partition. Another way is to have separate cabs created for each partition. Another problem is that on some devices the Storage Card is named as "Memory Card" (I've seen this on on my O2 Atom Exec), hence again manual registry changes are required or a custom cab needs to be created for these devices.
The attached cab installer tries to overcome above mentioned limitations. During the installation "Device" and all the available Storage Card Partitions are listed and user is asked to select the destination. The registry changes are performed accordingly to enable Mail and Attachment storage on the selected partition or Device.
The cab creates following registry entries under "HKLM\System\Inbox\Settings" :
- PropertyPath = <destination>\Mail
- AttachPath = <destination>\Mail\Attachment
where <destination> is the option selected as destination while installing the cab.
Uninstalling the application from Add/Remove programs should restore the old values (if any) of the above registry keys.
The cab file has been tested to be working fine on WM6.1 and should work fine on WM6 also. WM5 requires different registry entries and the attached cab does not work for WM5.
Please let me know if anyone find this useful
I just installed this on my Verizon XV6900 with Windows Mobile 6.1. All I can say is, Awesome! Thanks for this. I love the automation of it. Seamless. And providing the uninstall is also nice. Just installed, powered off, then back on, and all is well. Do you think you might also be interested in doing the same thing for Internet explorer temp files, favs, cookies. Maybe make the folder it creates be called "Internet". I had a file before for my Moto Q9m that made a bunch of things store on my storage card and I loved it. It really kept my phone running very fast, as it didn't use up main storage. With my old phone, I had 5000+ emails, alot of favs and such. I loved the fact that I could wipe my phone out any time, and then re-import the reg changes to point back to the storage card for all my stuff, and I was right back up and ready to go with all my files.
Thanks Again!
ABOUT
The purpose of this CAB is to reach a sort of UC way but with a very easy & friendly approach
HISTORY
I come from Diamond world, so because this CAB can be adapted for other platform/devices why not preparing a separate sUC.cab to use for enabling ALL the stuff (ramdisk, pimbackup,ram recovery,etc...) included in Dia Duit rom series?
what have I to do with this cab?? simply it will apply these features:
Latest stable MortScript is inscluded & ready to go, so no more needs to install as separate cab
Choose between 3 speed profiles: 1. fast (takes more ram & battery), 2. balanced (not heavy tweaked but not funny) & 3. untouched (default WM6 settings)
GPS profile: TomTom, iGO, Navigator or default WM6
Everyday auto recover RAM feature (at 4.30AM) + automatic sms/contacts/calls backup/fav manila people (trough pre-configured pimbackup app, PimBackup included)
Ramdisk (2Mb) feature (optional)
A new way for a fully automated CAB/REG/EXE/CPY installation/copy after every hard-reset/rom upgrade
UPX executable, compress (fully automated) exe files from fresh installed cabs, this saves space & gives faster app load times
Easy & fast tweaking method without 3rd part software: tweak registry scripts (with comments)
Tips enabled by default to preserve a bit more battery life (for ex 3 secs of led blinking instead 5, increased battery life counter,etc) + increased speaker sound volume + many example for setting automatic alarms, rings, etc...
Moved MAIL + Attachments folders from main memory (My Device) to external one (Storage Card)
3 / 4 rows configuration
This should work on every WM based rom, also because I added the auto recognition of "Storage" name... so should work without troubles also on NON WWE roms (except for CABi installation)
DOWNLOAD sUC.cab HERE
DOWNLOAD sUC_source.zip HERE
BEFORE INSTALL (mandatory)
create in your "Storage" (the BIG one) a folder called "Backup and Restore", then inside it a folder CAB (inside this another folder called CABi), then at the same level of CAB folder create a folder called CPY, then REG, then EXE
so practically your basic structure should be like:
Code:
Storage Card (or whatever name)
=> Backup and Restore (folder)
=> CAB (folder, put here all the cabs you want install on main memory)
=> CABi (folder inside CAB folder, specific for "must go into Storage", see notes)
=> REG (if present all reg files here will be joined to default WM registry)
=> CPY (if present all files here will be copied under their correspondent folders)
=> EXE (if present all .exe & .mscr files will be launched)
all files in the CAB folder will be installed (automatically) into "device", the ones in the CABi folder will be installed into "Internal Storage" (or whatever you have, always automatically), from REG folder all *.reg/*.rgu files will be loaded on the fly, from CPY all files will be copied (with overwrite) into correspondent folders (for ex useful for copying personal dlls, wav/wma/mp3 files or background, etc...), for finish from EXE folder will be launched your executables (personally never needed, but who knows?) & if present all *.mscr scripts... pay attention to exe files that needs user interaction
INSIDE THE CAB (a deeper explanation)
when your sUC cab is installed it simply creates a registry entry under [HKLM\init\]"Launch69"="2ndboot.exe", this permits the script 2ndboot.mscr (launched by 2ndboot.exe) to be loaded upon system reboot (just one time)
this script, if the structure mentioned above isn't found, it will create automatically all the folder & default reg files needed under your storage card, the name isn't important because it should guess itself its correct name, so don't care if your storage is called something like "MyBigStorageCard"
then it will ask you some questions... such as if you use ActiveSync, which GPS performance adopt, etc... all this info, which at 1st you'll pay high attention, will be stored under your storage card in a file called config.txt ...why?? simple... because next time you will flash or hard-reset your phone you wont have to push a button the script will found that previous stored config file & it will take all the info needed for final rom configuration to skip all annoying questions after every upgrade/HR
note: there is also an hidden option that should be used only by experts, to enable this option simply add by hand to your config.txt file the line: FastInstall=1
this will skip all countdown menu & messages... personally I use this option because flashing a lot this saves much time more
next it will look in the CAB folder for installing your CABs into "device" or main memory
next in the CABi folder for installing CABs into your storage card (you need to do this just 1st time, I'll explain later...)
next it will look at a file called upxlist.txt (must filled before), where simply you will specify all the *.exe file you want to compress after every cab installation... for example your upxlist.txt could look like:
Code:
\Program Files\Navigator\TomTom Navigator.exe
\Program Files\9.5 Beta\Opera9.exe
\Internal Storage\Program Files\Binaryfish\All Mobile Mines\All Mobile Mines.exe
note: every line for every EXE file, pay attention that you can compress just EXE files coming from extra CABs, because EXE files present in the rom are read-only
next it will copy a set of basic reg files with many tips/tricks/examples inside, useful for making many customizations
note: of course if you have previously prepared the folder structure & you have copied your REGs files under the REG folder they will be processed together the files above
next it will look in the CPY folder and will replicate the found folder structure (with files too), for example create inside it a folder \windows with some file inside & it will copy all found files under \windows on your device, or create \program files\myapp & it will create that folder structure in your device, of course it works also for Internal Storage even if it has no sense, anyway just a note it doesn't create empty folder, to create an empty folder just use a single .mscr script (something like: MkDir("\mydir") ) & copy it in your EXE folder
next it will look in the EXE folder & will launch all the exe files inside it, if found it will launch also all *.mscr scripts
next if found (you'll understand better upon an HR), it will ask you to restore your backed-up start menu, so you don't have to re-arrange your icons again
next if found, it will ask you to restore your last PIM backup & will reboot
notes:
right now CABi procedure works only on WWE roms (due to translations work to be finished), anyway there is a trick to skip CABi installation, or better make by hand just once (read few lines below)
installing cabs into Storage Card sometimes will fail, this simply because some cabs need confirmation/accept license & so on, so don't expect will work 100%, also many cabs require to be installed into main memory so NOT into Storage Card, for ex I use to install into Storage Card simple cabs such as games
sometimes pim backup restore can fail, try to restore by hand after installation; backup are divided into week days (monday, sunday, etc... "Last" is the last saved backup)
if you put sUC.cab in your CAB folder wont re-processed of course, useful if using sUC together with UC/UC2 installation method (see at bottom)
if you still use the 1st sUC release way your personal scripts still work like before, simply move them under EXE folder, or transport as reg entries directly into your personal reg file & copy it under REG folder, you can find on the same folder some examples (to clean all your old stuff simply empty the REG folder, modded REG files wont be touched on future upgrades)
you don't need to re-install every time your CABi, just install them once, then on next upgrade answer No or simply edit your config.txt & change the correspondent value; after CABi installation on a clean boot go with your explorer under "\windows\start menu" folder & re-organize your start menu structure (cut/past links, create/delete folders, etc...), remember to don't delete "Settings" folder even if empty, then go under sUC menu & backup your StartMenu, on next upgrade sUC will detect start menu backup & it will reinstall automatically... because the content of your storage card isn't erased after a rom upgrade/hard-reset your installed CABs will stay there untouched, so backed-up start menu has inside correct links
is possible to move TomTom, iGO, Navigon, etc... definitively into your storage card, so you don't need to install them every time: copy entire nav software folders from \program files to \internal storage\program folders, re-create icon shortcuts (copy/past as shortcut in your start menu), for iGO you have to edit sys.txt (under iGO folder) & change the path of base installation
in the same way is possible to skip for example FingerKeyboard installation from related cab, simply take a look at this short guide
INSTALLATION
note: to migrate in every new sUC version simply move your reg mods in your Personal.reg file, erase all the rest of reg files because they will be re-generated with the new ones, remember that on upgrades reg files wont be touched so pay attention on what you mod
if the rom is UC compliant simply create a called SDConfig.txt file in the root folder of your Storage Card, for example your SDConfig.txt could look like (pay attention to upper-lower case & no empty lines):
Code:
LOCK:Enabled
CAB :\Internal Storage\Backup and Restore\CAB\sUC.cab
LOCK:Disabled
RST: Reset
in this way at reboot will start standard sUC procedure (remember MortScript is included & also that sUC cab wont be re-processed even if present in CAB folder), instead if the rom isn't UC compliant simply install sUC as any normal cab, then it will ask to restart (or restart manually) & automated procedure will begin on reboot[/b]
bye,
davide
OK, that's all very nice, but WTF is it?
Wouldn't hurt to have an "about" section in the post for ppl who see this thing the first time in their life.
GENIAL !!!!!!
aiiro said:
OK, that's all very nice, but WTF is it?
Wouldn't hurt to have an "about" section in the post for ppl who see this thing the first time in their life.
Click to expand...
Click to collapse
yep... you right sorry, I'll correct soon...
suiller
OMG~ You finally made it available!!! I'm going to test it with my HD and will report back once everything is organised
I didn't mean to sound rude, sorry... Anyway, thanks for the addition, but still - what is UC? User Configuration? Could You post some screenshots too to make it more comprehensible for dumbusers like me?
jackkkkk said:
suiller
OMG~ You finally made it available!!! I'm going to test it with my HD and will report back once everything is organised
Click to expand...
Click to collapse
oh FRIEND! I found you
yep, I'm looking here around to see if my mad projects can be useful
the cab isn't still perfect but should work, of course I haven't a different device from diamond so all you will be a sort of beta tester
I've removed all specific diamond stuff, so it should work
Of course this is just a starting point, I'm dedicating much time to develop this small piece of "software", thx also to many other friends
You know as it works, so you should feel a bit like at home
aiiro said:
I didn't mean to sound rude, sorry... Anyway, thanks for the addition, but still - what is UC? User Configuration? Could You post some screenshots too to make it more comprehensible for dumbusers like me?
Click to expand...
Click to collapse
yep you are right... UserConfiguration, the only difference is that you don't need to write any config file, at least not as "normal" user, it's enough to copy under correct folders the CAB plus other stuff you want installed/loaded after every flash/hard-reset
I'll porvide soon a video-guide, so it will be for sure more clear
OK, OK, nuff with making fun of me Or were You seriuous with video guide?
Cos I just had a brilliant idea - I'll install the damn thing and look for myself
I think I should have done that in the first place. But still, I believe screenshots would save some time understanding what's it really about.
Yeah Screwed Up Click for life
no no I'm serious friend... but I'll suggest to wait a couple of days because I'm working on a new version where is possible to cut-off all the specific HTC/manila stuff & above all I'm re-commenting all the registry entries that interact with OS
no no I'm serious friend... but I'll suggest to wait a couple of days because I'm working on a new version where is possible to cut-off all the specific HTC/manila stuff & above all I'm re-commenting all the registry entries that interact with OS
Hi,
really don't want to be rude or offence, but ... isn't this something like SASHIMI????
If so ... where are sUC's pros?
kind regards
fwt
almost... but it's very very simple... I'm testing an heavy modified version able to run on almost every WM6.x base device
OK the CAB is ready for testing purposes... please re-read 1st post because I'm making a better, I hope easier, description of features... thx
bye,
davide
Mate, this piece of software is plain GENIUS!
So much easier than the UC thing, with all the boring scripting. This way you just place in folders, and you are (mostly) done! Amazing stuff!
I have some questions/requests for you though...
Is there a way to repeat the procedure (restore at 1/2 start up), at a later time? This could be useful, for example, if some files get corrupted, or you just want to revert back to default cabs/settings, etc. So I guess what is needed is a way to manually activate the procedure.
Second thing is regarding mail settings. Is there a way to back this up? My hotmail settings get destroyed after every HR.
Cheers.
Forgot to mention, a manual activation of this procedure would also help if (for example) you want to make multiple program installations. This way you could just use the folder CAB, without wasting time on every single program you are installing/testing...
Cheers
krale said:
Forgot to mention, a manual activation of this procedure would also help if (for example) you want to make multiple program installations. This way you could just use the folder CAB, without wasting time on every single program you are installing/testing...
Cheers
Click to expand...
Click to collapse
hmm... it could be a good idea... even if some phases can't be reverted, or better it's very complicated to "go back"... such as for ramdisk
anyway many phases are yet accessible as indipendant scripts just take a look under "\Backup and Restore\scripts" folder, of course other script could be extrapolated but I'll do probably on next version... let's say this is a testing purpose version because I have to "think" that this app must work on many (almost all I hope) wm6.x based devices
As one of the end (l)users who first saw this in Suiller's Dia Duit rom series, I can attest to this resolving one of the major grievances of Windows Mobile rom-upgrades. With some "smart" planning ahead, getting everything back can now be mostly scripted by simply placing the install file in the correct directory. Same with restoring data from your pimbackup, or adding registry settings. Once again we have a case where the xda-developers have surpassed the "offficial" roms in user friendliness.
I have since moved on to WM6.5 (still on my Diamond), but I sorely miss sUC from my later roms.
//Svein
updated sUC, corrected some small issues
I corrected some default/samples reg files, so I suggest to erase all default *.reg files under REG folder to update correctly
move your personalization to something like "MyRegPers.reg"
please reports here bugs/issues/suggestions or whatever... thx
hi
I am sorry if this has been asked before (but I did search)
Is there any way to add suggest word(s) when typing in text, I have to type the same sentence over and over again every day and on my old phones/PDA this was not to bad as you could set the suggest word(s) to give you the next 4 works, I can't find this in the HD2 is there any way to add it
Thanks for any help
according to hint 19 in this thread:
19. Improve Suggested T9 Dictionary With Custom Words
The Leo has a very useful hidden application in the Windows directory. You need to unhide hidden system and Rom files in order to find it. Find the file "eT9MyWords.exe" in the Windows directory and add a shortcut to this file in your Windows/Start Menu folder.
When in the application, add the most common words you use when using the keypad such as names, locations, user names, email addresses and other words not common in the standard T9 dictionary. For example if you are based in London, UK you could add the following locations:
Leicester, Piccadilly, Tottenham, Soho, Charring, Euston, Trafalgar, Clapham,
and words such as BRB, DVD, coz, lol, xoxo, [email protected], ciao, etc.
Click to expand...
Click to collapse
I have read these tips and know about adding custom words.
What I want is for three to four words to come up to complete a sentence.
This has been in the input tap on old PDAs suggest word(s)
Hi
Is there no one Who can help with this?
Really with all the clever people on this site can no one help me
Please someone help me
Hi, i did a few tests and found...
et9mywords wont accept spaces, and although you can sneakily paste sentences into the input box, it wont save them, so that method is out.
Custom words are also found in HTCMDB.txt, and the good news is it works!
(See image)
The line 'this is a test' i hard coded into the file using my kitchen, then the 'this is a second test' i added as follows....
(I use resco explorer, i suspect the normal file manager wont do what is required, total commander probably will)
find /windows/HTCMDB.txt (it will be hidden, so show all files)
copy it to your sd card, and from there to your desktop.
(I tried editing it on the phone using windows mobile notepad, but it didnt work right)
On the PC, right click the file, properties, and untick 'read only', apply.
Open it and edit it as required.
Save it, and again right click, re apply 'read only'
Copy back to your sd card, and from teh phone use commander or resco to move it to /windows/
You will probably get a warning about rom files and what not, thats ok.
Reboot, and you should now be able to see your sentences.
PLease let me know how you get on.
EDIT - just for clarity, every entry inside HTCMDB.txt must be on its own line.
thanks for your help with this I have done as you posted and it works, it's a bit long winded but it works
thanks jason