Newbie Wifi Help Please? - 8125, K-JAM, P4300, MDA Vario General

Hi Everybody!
For some reason, I can connect to the internet when my pda is pluged into my computer via usb, but I cannot connect to my wifi?
I use a netgear router and WEP.
PDA is running win v.5
Thanks for any replies?
{>

scutter said:
Hi Everybody!
For some reason, I can connect to the internet when my pda is pluged into my computer via usb, but I cannot connect to my wifi?
I use a netgear router and WEP.
PDA is running win v.5
Thanks for any replies?
{>
Click to expand...
Click to collapse
When your PDA is plugged into the computer and active sync is active it will connect to the Internet using your computers connection rather than wifi. I'm not sure if there is a way to stop this, I would guess by stopping the PDA from automatically connecting to active sync on connection (I have seen threads about this around the place, I believe there is a tweak on the wizard wiki to help with this also..). Hope that answers your question.

Hi SYN and thanks for your reply!
Iunderstand now how I am gettin online, but I don't understand why I cannot connect via wifi?
I have added the Wizard to my acces list on my netgear router and I use a WEP for all machines.
{>

scutter said:
Hi SYN and thanks for your reply!
Iunderstand now how I am gettin online, but I don't understand why I cannot connect via wifi?
I have added the Wizard to my acces list on my netgear router and I use a WEP for all machines.
{>
Click to expand...
Click to collapse
So your difficulty lies when your NOT connected to the computer via usb.. Does the PDA see the wireless network? Have you tried the PDA with any other public wireless networks?

Hi Syn.
Yes it does see my WiFi.
Maybe as a newbie, I'm doing something wrong?
I haven't tried connecting to any other network as I can't see any others.
Maybe I wil try that 2morrow when I am in the city centre.
{>

scutter said:
Hi Syn.
Yes it does see my WiFi.
Maybe as a newbie, I'm doing something wrong?
I haven't tried connecting to any other network as I can't see any others.
Maybe I wil try that 2morrow when I am in the city centre.
{>
Click to expand...
Click to collapse
Have you added the WEP key to your PDA when you try and connect? When you try to connect it should provide a notification popup asking for the network key, this should be the hex WEP key, not the passphrase (the passphrase may work, but I've never had luck with using them.)..

Hullo again !
No, I didn't see that?
Is there a "THICK GUIDE TO SETTING UP TO YOUR HOME NETWORK"?
{>

scutter said:
Hullo again !
No, I didn't see that?
Is there a "THICK GUIDE TO SETTING UP TO YOUR HOME NETWORK"?
{>
Click to expand...
Click to collapse
Then thats the issue , ok, *grabs his phone and checks where else you can input the wep key*..
Start --> Settings --> Connections --> Network Cards
This should bring up a menu with the title "Configure Wireless Networks" where you should see a list of already configured networks.. these will generally be networks you have connected too (or attempted to connect to) in the past.
If you click on the SSID of your home network, you will be taken to another menu.. hit the "Network Key" tab at the bottom and add your routers security settings here! Once this is done you should have no problems connecting to the network..

I am having a wifi problem as well. My wife's MDA can connect using the wifi, we're broadcasting in mixed right now, and she doesn't have the tweak for G. I have several things installed, and am running the custom 2.17 TMO usa rom.
opennetcfv1.4
xdadevelopersregistrywizardwww.gadgetfreak.de 54mbit wlan
macromediaflashplayeractivex
loving wife extended rom unlocking wizard
djvw htc wizard 2.0 optimizer
netfront
lakeridge keyboard skin
calc98
omap overclock
dictionaryeditor
passman
sktools
wizard registry tweaks by xelencin
now i know that some of these programs do allow G type access. but maybe it's something else. last night at an apple store their hotspot wouldn't work either. in the comm manager it'll say it's connecting, but after a few moments it'll just go back to saying available

Unfortunately I do not have the G tweak installed to test if I have similar issues. I would suggest reversing the G tweak and testing to see if you still have problems connecting to wifi networks, if not then clearly the tweak is causing the problems. To be honest I don't personally see the need in pushing from 11MB to 54MB due to the lack of traffic a PDA will use.

:?: :roll:
Totally thick here!
I see my home wifi and when I tap on it it says :
Network name :
Connects to :
() This is a device to device (ad-hoc) connection
Can't see but I don't see SSID?
I'm a plonker ain't I ? Go on say it :lol:

scutter said:
:?: :roll:
Totally thick here!
I see my home wifi and when I tap on it it says :
Network name :
Connects to :
() This is a device to device (ad-hoc) connection
Can't see but I don't see SSID?
I'm a plonker ain't I ? Go on say it :lol:
Click to expand...
Click to collapse
SSID is the Network name .. sorry technical term. Once you have clicked on your home network in the list, you should be able to follow the rest of the instructions without any problems. However, going to your other thread (the Rom update question) the instructions may differ for your rom version.. If so, it might be an idea to solve that problem first as a Rom update will erase all of this anyway ..

I think your right!
I don't have any option to input my hex key!
I called o2, but they will not let me download the new ROM as the phone is originally Tmobile!
Is there a ROM you can reccomend and then at least I might be able to input my hex key?
Thanks again
{>

scutter said:
I think your right!
I don't have any option to input my hex key!
I called o2, but they will not let me download the new ROM as the phone is originally Tmobile!
Is there a ROM you can reccomend and then at least I might be able to input my hex key?
Thanks again
{>
Click to expand...
Click to collapse
I'm not sure which would be the best rom for you as your phone is originally TMobile, I would suggest going into the "Wizard upgrading etc." forum and either asking or searching for threads made by TMobile users on the O2 network. You may find that the latest O2 XDA rom will work perfectly fine on your phone (I dont see why it wouldnt...) but I would double check with someone who knows more about the Wizard before doing anything.
All of the roms for the Wizard can be downloaded from the sites FTP which is in a sticked thread at the top of this forum .

Related

no WiFi success after ROM update on 8125 -- ideas?

updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.

Cingular 8525 Wi-Fi issues

I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..

the wifi problem always unsolved

Like already write, I'm looking to helps ref a singular problem in my ppc branded SB but with sw THC in english - I was buy it in thailand one month ago and until 20 of december everythink was ok, but...
I found that the ROM contain the: HTC TyTN 1.18.255.106 ExtROM WWE
The NETWORK MANAGER show me that the tytn is CONNECT to WIFI access point but in the CONNECTIONS always appear no any presence of WIRELESS SERVICE that I can select to use for browse my server , internet and/or skype call
If I use the usb connection there is connection, same by umts and gprs services
Really I don't unterstand what's happen!
I was already many time doing the hard reset but nothing is change!
What you think about?
May be that there are corrupted files that avoid to install few commands?
Regards Freddie
There are the other part of sw that are install in the device by the manufacturer or seller that are not include inside the rom place?
Thanks in advance for your helpings
Black Eagle
go to setting >connections>network cards>
then
you will see a bunch of access points
when you see the one that says available
hold the styles down on it
tap connect
and you should be ok
also check the drop down menu on the bottom of the page
make sure its on both access points and whatever else it says
and also disable the cingular proxy
start>settings>connections>connections>setup proxy server>uncheck the uses proxy server to connect to the internet box
Sorry may be that I was wrong explaine you:
1. in the setting>connections>network cards = no problem my tytn find the access point and after my prompt connect without problem.
2. the problem is in the setting>connections>connections>advanced>select networks>my ISP>edit ... = where there are no tracks of the wireless network available to be select, in way to use the wifi connection that in setting>connections>network cards is ON
I wait your reply thanks
Black Eagle
black eagle,
I think I've undertand your question...
If you have found the WiFi access point and have gotten conected, there is no need to set a conection for that access point;At least, for me that it's not necesary.
When I go to a public place with wifi, or in my home LAN, just let the connections settings to "My ISP" without any changes (no new modem, nothing at all) and thats all, you can surf the net.
regards;
mablan
my problem solved
hi mablan,
thanx very much, fortunately i searched the forum for wifi and got ur post.
i too had the problem of getting good wifi connectivity over my adsl router witg my prophet( O2 neo) but not able to surf net in PIE. when i selected network as "My ISP" it all gone and now i am able to surf my adsl on neo, without any prblem.
thanx once again.
now only problem arises of autometically shifting/choosing of network for wifi and gprs. i remember it is stated somwhere in forum, i will make a try.
Hello mablan,
thanks for your interesting in my singular problem.
I understand what you mean but is not my case, even if my ppc in the setting>wireless lan>advanced>status result connected to the network, I cannot surf internet.
If I go to setting>networks cards i find my home hotspot that result waiting to connecting but ... always not connected
= in the wireless lan I am connected but in the network cards my connection don't exist - also in the connections>connections there is not the choice to select wireless network, don't exist
Hi BlackEagle, now I undestand your problem.
I'm sorry, I don't know what could be the cause of your problem.
Just a dumb question: Have you try to change the settings of your wireless network? I mean, in settings>connections>networkcards tap the name of the wn you want to use and change the settings of the Network key and 802.1x tabs...
If I found arround someplace something that can help you will let you know
regards and hope you find the answer..I'm sure someone here at the forum will help you
mablan
The Wifi Problem Is Now Solved
Hi friends,
I have find the cause of my problem all was in the .NET CF too old
after install of .NET CF 2.0 my problem was end
crazy that my problem was just an old driver
In any case thanks to all that just reply my questions
BLACK EAGLE
Hello I have the same problem, my wireless connection is there, I try to connect and it goes unavailable!!!!
I changed my tytn system from japanese to english but it was working just fine before. after for the first 2 days...
Now even when I reset it to Japanese S.O. does not connect to wifi only GPRS3G!!
Maybe too many hard reset???
What is .NET CF??
Maybe I should try that?
I have a lot of network cards in the list
IEEE 802.11b/g Compatible Wi-Fi Ad...
NE2000 Compatible Ethernet Driver
Virtual Ethernet Intermediate
Remote-NDSI Host
PPTP NDISWAN Miniport
L2TP NDISWAN Miniport
Microsoft null Ethernet Miniport Driver
????????????????????????????????????
Which one shuold I choose????
????????????????????????
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Thanks Black Eagle I`ll try that!
BLACK EAGLE said:
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Click to expand...
Click to collapse
Black Eagle
This installable is for computer, its not for a mobile device. The microsoft webpage does not say this is for Windows Mobile OS.
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
ultramag69 said:
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
Click to expand...
Click to collapse
so?
i am having the same problem with windows M 6 so looking for solutions. how does it matter if someone else faced the same problem 2 years ago?
Its relevant because MS may not be offering the same software to download. I've noticed that some of the older solutions aren't any good for certain things anymore as the apps no longer work for the OS I'm using or that the app, though easily found a while ago, is no longer supported by certain sites.
2 years is forever in the computer world....

WM6 not connecting to Wireless N Router

Guys, am facing a very weird issue.
i have changed my wirless router from G to a new linksys N router, now my mobile fails to connect to the wirless, though the device sees the connection, once you hit connect-next - next the connection becomes unavailable.
i have searched here and there, and found out that there MIGHT be a cab or a registery fix, anyone can help???
am running TNT.SE
Router Settings
Have you checked the router settings and make sure that it is set up for A/G/N? I have a Linksys N gigabit router and there is an option for N only and other variants. See if that works.
Hi , thanks for your reply as i thought no one will answer me.
the option should be on as i am connected on my Notebook and its a G, same goes for my brother's iPhone, its connected.
i have tried giving an IP,it didnt work out, disabled security, also didnt work out, any other idea's? what Rom are u using?
try setting your wifi power mode to "best performance"
XtreMe_G said:
try setting your wifi power mode to "best performance"
Click to expand...
Click to collapse
did that too, didnt workout , any ideas? there should be some 1 out there who has a solution guys!!!
You have got imate jasjam. I had same problem once with WM5 about an year and half ago. The solution was to do a hard reset to it. Please do back up your stuff before doing so.
beastfellow said:
You have got imate jasjam. I had same problem once with WM5 about an year and half ago. The solution was to do a hard reset to it. Please do back up your stuff before doing so.
Click to expand...
Click to collapse
even this didnt work out
am being such a pain in the ass, but i need a solution and here is the only place that can give me that
Anyone?????????
No idea mate...
Been having the same problem and its P*£$ING me RIGHT OFF too!!!
I got a Buffalo WZR2-G300N Router and it dont wanna connect to it no-matter wat!!!
Do you have set:
An encryption key (WEP or WPA)?
MAC address filtering?
Also, is the router set to allow N/G/B/A (or whatever it supports)? Tried setting it to operate in G only mode?
Checked for firmware updates to the router and made sure you are using the latest?

Cant connect to WIFI on college.

Hello Everybody. I'm in the situation that i live at college. To connect to the internet, we have to write a username and password in a webbrowser, and then we are online. If i do not log in, i will only have permission to my own little network.
My problem is now:
When i try to log on to my access point through WIFI on my LEO(hd2), its like rejecting the connection and says the password is wrong. But it works fine with my laptap and even with my old iPhone 3g... So wtf is wrong with the HTC phones? Actually i also tried to use my brothers HTC DIAMOND 2 which is also running with windows mobile 6.5, and he had the same problem. "No access to my WIFI " I have tried to change my AP hardware to some other brand, but still same problem.
Another thing is that the HD2's wifi works fine at places where i dont have to log in first to get online. (Example at my parents)
So what can be wrong? The fact is that my laptap and old iphone works fine on my wifi network. They will log on to the network(without being on the internet) and after i have opened the browser and entered the username and password, im online.
I'm a bit screwed, because i want it to work, but i have no solution.. :S Why can i log on to the wifi with my laptap and iphone but not the HD2?
Please help.
Best regards.
One more thing.
1 more thing..
If here are any danes. i get this error in danish if i wait along time:
"Der kan ikke hentes en servertildelt IP-adresse. Prøv igen senere, eller angiv en IP-adresse i Netværksindstillinger".
In english:
"There can not be downloaded a server assigned IP address. Please try again later or enter an IP address in Network Settings."
have you tried skyfire or opera instead of IE
Well...
Well, its not the browser which is the problem.. I cant connect to the WIFI... so i never come to that point to write username and password.
and im already using opera
Alfetch said:
Hello Everybody. I'm in the situation that i live at college. To connect to the internet, we have to write a username and password in a webbrowser, and then we are online. If i do not log in, i will only have permission to my own little network.
My problem is now:
When i try to log on to my access point through WIFI on my LEO(hd2), its like rejecting the connection and says the password is wrong. But it works fine with my laptap and even with my old iPhone 3g... So wtf is wrong with the HTC phones? Actually i also tried to use my brothers HTC DIAMOND 2 which is also running with windows mobile 6.5, and he had the same problem. "No access to my WIFI " I have tried to change my AP hardware to some other brand, but still same problem.
Another thing is that the HD2's wifi works fine at places where i dont have to log in first to get online. (Example at my parents)
So what can be wrong? The fact is that my laptap and old iphone works fine on my wifi network. They will log on to the network(without being on the internet) and after i have opened the browser and entered the username and password, im online.
I'm a bit screwed, because i want it to work, but i have no solution.. :S Why can i log on to the wifi with my laptap and iphone but not the HD2?
Please help.
Best regards.
Click to expand...
Click to collapse
Do you know what security is used at ur college wifi ?
At our office we used highest wpa2 enterprise security which needs username\password to log on to network. So please check settings in ur laptop and iphone ... u may need to disable certificate check in registry.
After couple of days troublshooting what worked in my Touch Viva windows 6.1 , Try this
1, Add Dword with some registry editor (search forum for how to edit registry)
HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
2, I went into Settings > Connections (tab) > Wi-Fi > Network Adapters (Tab)
> and selected "NE2000 Compatible Ethernet Driver" and I had to set a static IP configuration in the NE2000 Compatible Ethernet Driver's settings before it would work, Dont worry it will assign ip address by DHCP even then
ok
Okay, i will try that later thanks.
to rathule
its not my college wifi, its my own AP and wifi, which is connceted with a cable in the wall.
Alfetch said:
its not my college wifi, its my own AP and wifi, which is connceted with a cable in the wall.
Click to expand...
Click to collapse
ok but u mentioned 'Cant connect to WIFI on college' . So i believe the accesspoint is managed by sombody else. Even then try the above settings.
Well
Well, i live at a college which access me internet through a cable in the wall. I have then connected my own wifi to it. But hmm, im not pretty sure what you meant i should do. i got a registy program on it now.
Alfetch said:
Well, i live at a college which access me internet through a cable in the wall. I have then connected my own wifi to it. But hmm, im not pretty sure what you meant i should do. i got a registy program on it now.
Click to expand...
Click to collapse
ohh ok then do the following.
1-set manual ip address of ur network in NE2000 Compatible Ethernet Driver. then try to connect.
2-set ur wifi from saving to best performance in HD2 (u can change later on)
3-Identify what settings have u set on ur wifi router ? if it something like wpa then change add dwod in registry as sid above.
4-Create a wifi profile manually in ur Hd2
what i do in my college here is go to the help desck or IT office in your college and regester your HD2 " ID" or i think it called IMEI
because what i think is your college blocked you

Categories

Resources