Related
So, I have PocketShield installed and it's set to slide or light unlock and answer. Quite often when I get a call it takes so long to unlock and answer, the person is gone...
There are maybe a few options -
1) I've installed and uninstalled so much stuff, maybe I need to start fresh? I have noticed the HD is a little 'laggy' now. Should I hard reset and install things back on slowely, testing it's responsiveness as I go?
2) Maybe I should switch to S2U2? I used this for a long time on my Kaiser, but have been concerned by everyone saying it drains battery power.
3) Do I need a screen lock program? The device only wakes up on a phone call and now you have a slide to answer/ignore anyway. Do the hardware keys do anything at this point? Am I safe to carry it round in my case without a screen lock?
Does anyone else suffer from this, or just me?
Thanks for any help/advice in advance.
Having the same issue. Sometimes my slide option simply doesn't work first few attempts. My solution is to use the "answer call" key beneath the main screen until this gets resolved.
S2U2 works like a charm on the HD and it doesn't draw additional battery as far as I have seen over the past few days.
When u have a call, u don't need to slide so you unlock the device then accept/reject the call.
Depends on what you have set, you can either have the original accepting/rejecting HTC screen poping up to take/reject your calls,
or you can set it so u have a new slider appearing on the wallpaper of S2U2 to accept/reject the calls
Try it, you won't regret it guys.
Well, yesterday I hard reset my HD and installed just the stuff I wanted. I've gone back to S2U2 and everything seems much much better so far. The only annoying thing is sometimes the phone wakes in landscape mode still, even though it's set to not rotate in Gyrator (and doesn't when it's woken, it stays in whatever it is in.)
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Its a very well presented Screen Lock, that's why. The question is just how to go from that to answering a call...
Id I have S2U2 installed, and a call comes in on my HD, what happens? does s2u2 take over from the default "slide to answer" system?
Yes it does. I think the problem I had was it wasn't doing that properly before hand. They were obviously conflicting with each other and I was struggling to answer calls.
gt112 said:
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Click to expand...
Click to collapse
Well S2U2 will lock your phone screen and buttons so you do not start by mistake an application or a phone call when the device is in your pocket.
Even if by mistake u click on the power on button, ur device is still locked until u unlock it using a slider like on the i-phone.
It allows u to display a wallpaper of your choice, different then the one on your today screen or in TF3D. It allows u to display clock date, network signal, tasks, missed calls, SMS, etc ...
Try it, it's free and very nicely designed
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
vangrieg said:
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
Click to expand...
Click to collapse
Just tried it few seconds before posting, called myself from the office phone, answered the call using the slider is S2U2, the screen turned off, I ended the call by pressing on the end call button on my HTC touch HD, and the S2U2 screen lock was there, the device was still locked.
It works perfectly with the touch HD.
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
hi there
i got a "small" problem with my touch hd. since im carrying the phone in my pocket, i installed "slide2unlock" to prevent the screen from unlocking itself in my pocket...
thing is - i got numerous complaints from people on my contact list, that i called them (sometimes multiple times in a row) without beeing on the phone... seemed to me that the screen unlocked (by accidently touching/pressing the botton on the top in my pocket) and the now unlocked phone started to do funny stuff like calling people...
problem is, that even with s2u installed AND active, my phone keeps calling people. one time, i held the phone in my hand, started the music player, locked the screen via the top button - and the next moment the screen lit up again (without me touching anything "touchable" like the side- oder top buttons - the screen was locked anyways) and my phone started to call a contact from my contact list.
there seems to be no real schema in what people are called. seems like the phone picks randomly one of my contacts on my list and calles him right away.
how do i stop this? im out of ideas here and this thing is really getting on my (and others) nerves...
According to your through description the problem might be even an exotic thing for WM - a virus. Try Kaspersky mobile
Have you installed any custom phone/dialer applications? Also any scripting applications like mortscript and a badly written script causing it... Also are you using AEButton plus. If so then may be a bug in one of those, still difficult to understand.
Otherwise looks like a real malware something not usually known in WM world
lefteyeclosed said:
hi there
i got a "small" problem with my touch hd. since im carrying the phone in my pocket, i installed "slide2unlock" to prevent the screen from unlocking itself in my pocket...
thing is - i got numerous complaints from people on my contact list, that i called them (sometimes multiple times in a row) without beeing on the phone... seemed to me that the screen unlocked (by accidently touching/pressing the botton on the top in my pocket) and the now unlocked phone started to do funny stuff like calling people...
problem is, that even with s2u installed AND active, my phone keeps calling people. one time, i held the phone in my hand, started the music player, locked the screen via the top button - and the next moment the screen lit up again (without me touching anything "touchable" like the side- oder top buttons - the screen was locked anyways) and my phone started to call a contact from my contact list.
there seems to be no real schema in what people are called. seems like the phone picks randomly one of my contacts on my list and calles him right away.
how do i stop this? im out of ideas here and this thing is really getting on my (and others) nerves...
Click to expand...
Click to collapse
it "might" be the stylus....
the default in s2u2 is to ulnlock on stylus removal if your stylus get caught in you pocket
and pulls far enough out it'll unlock
but anyway check the unock options out in the s2u2 settings
beter yet stick a reply in the s2u2 post and see if anyone else hase a silmilar problem
TC,
Or uninstall that screen-lock application and see if the problem still occurs. If it still occurs, you now know it's nothing to do with the App and perhaps indicates a bigger issue.
Cheers.
Stupid question, but are you locking your screen by pressing and holding the Hang Up key in the bottom right corner?
I find the only way to fully lock the screen to stop the kind of activation you are talking about is to press and hold Hang Up key to lock it.
Then pull out the stylus to unlock, or press the Answer Key followed by the then-displayed unlock key.
Hi,
I have exactly the same issue.
My version of s2u2 is 1.62.
I just changed the option in s2u2 to avoid the phone to turn on when removing the stilus...I will wait and see
Hi,
Even after I have changed the option in s2u2 to avoid the phone to turn on when removing the stilus it seams my phone is still makes some unwanted callings...
Any idea???
ARGH! Any way to disable the Start Menu's "Lock" button or make it not appear?
I had an interesting problem that basically results in all data loss if it happens. On a particular Blue Angel I was working on, the touch screen somehow lost its calibration. In attempting to get to the calibration menu, the wonky screen somehow hit "Lock" on the bottom left corner of the Start Menu, and the device locked. Since the touchscreen became uncalibrated there was NO WAY for me to touch the tiny area and slide it properly. Thus I could not unlock the device even though LOCK is something that I NEVER EVER USE. I had to hard reset and lost all data. In WM2003, this would never have been a problem! I imagine if someone does use device lock, a screen decalibration incident would result in all data loss too which is unacceptable!
I tried the classic style lock screen which requires less precision but it still involves the need to touch a specific screen area in order to unlock it.
Is there any way to get rid of the Lock option in the Start Menu competely? A registry key perhaps? I want NOTHING to do with the device lock feature, it just seems to cause more problems and data loss than anything else. Any suggestions?
I believe that I have seen a post or two regarding the soft keys for the Start Menu. I'll see if I can find them.
On a side note, please refrain from opening new threads with questions. There is a Q&A thread at the top of this section for this kind of inquiries. I will transfer your question over there. Thanks.
anybody figure this out? i really would like to know
Lock sucks. If you have the phone locked, and get an incoming call - it doesn't unlock automatically, and there is no way to unlock it on the 'answer phone' screen.
So - you cannot get an incoming call if you use lock.
i dont even use it. i use pocketshield but i dont want the lock button to turn on PS, i want it either gone or to have it set up as a "back" button.
Has anybody managed to get rid of that damn button ? I have been looking around the forum for ages and still can't find a way to get rid of it.
Hi,
I love my new HD2, but i've got the following problem:
The proximity sensor works doesn't work 10% of the time and because the touchscreen is so sensitive, i end up pressing random buttons with my ear or face. I've been manually locking the screen during calls which:
- is really annoying
- doesn't really solve the problem, screen lock during calls does not require slider to unlock, just a regular button and also has a hang up button on it, so it's pretty much back to the original problem.
I know that there's many custom apps out there that can circumvent this issue but i like the stock lock screen (with slider), i don't need another one.
What i need is an app that automatically locks my screen using htc's "slide to unlock" screen after i accept incoming call or after my outgoing call is connected.
If anyone can help me with this i would apreciate it.
why not try s2u2
it has ability to lock after call is connected
do u have something in way of proximity sensor? case or screen protector? i had similar problem but after making bigger hole in screen protector it works 100%
@brkix: i would like a solution that uses the stock lock screen if possible
@lake: i have nothing of the sort, but i confirmed in several forums including this one that the proximity sensor is not 100% reliable
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
schlox said:
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
Click to expand...
Click to collapse
man said everything
+1
SmartLock, offers incall and outcall lock. This may be your best option.
This CAB will lock the hardware buttons when you are in a call if that helps
http://www.cabcache.com/cabs.asp?cab=29
Do you have hair covering your ear?
Without wearing any head wear my sensor works 100% perfect.
Per advice in the second post, I've yesterday installed s2u2. Mates, this program works really good and answers my necessities. All I had to do was to put a short cut of the application to my main screen. Then, I just lock the device by tapping the lock button during a call.
There's even an option existing to lock the phone automatically when the backlight is off and/or during a call directly.
wingm4n said:
Hi,
... I've been manually locking the screen during calls ...
Click to expand...
Click to collapse
Oh well! Please, tell me how you do it!
I'd pleased if at least I could manually deactivate the screen in order to avoid touching button with my cheek!
I've been trying to find an option to lock screen during a call without succeed.
Thanks,
Cheers!
I have the same problem. This part fails.
Sorry, but I insist... wingm4n: how do you lock the screen during calls?
I still haven't been able to find such option
Cheers,
Up....
Hit start then lock(at bottom left side of screen) after dialing or answering a call.
i have same issue...not with keylocks but with the screen!!!almost every time i make or receive a call with my phone in my pocket or by ear hd2 make itself an other call or push lots of function..and this is very annoying!!!i don't like s2u2...really doesn't any solution exist for solve this problem???
thank you!
Cheers!!
Smartlock
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=505032
It locks the screen during calls, and has some other settings as well. I've been using it for a while and it seems to work just fine. And best of all, its free.
in s2u2 settings, just set: "lock on talk" and deselect "lock device". in this way...lock screen will work only in a call. that's it
I used to have such problem during my first uses with the HD2, I would realize because all of a sudden I heard keypad tones (and so did the other person ) while hitting the dialer with my cheek.
After that, I started noticing IF the proximity sensor triggered or not.
It's not really "idle", it's just very "picky", you actually need your ear to cover it, and not just your head being in its way... I took te habit of checking the phone display with the back of my eye to see if it's on while I answer a call, and if it is all I need to do is to move it on my ear so I touch the area with the proximity sensor the display turns off again. Works for me practically 100% of the times now.
How to turn this off
I have a HD2 running the energy rom and when a call is connected it locks the screen. But I use google voice and need to be able to enter my pin. Anyone know how to get the screen not to lock during a call.