I have search all the threads I could find.....
I have installed all the possible programs to no avail (BCHS, Bluecast, Bluetunes etc)
.....and I just can't seem to find a definative answer to:
HOW DO I STREAM MUSIC/AUDIO (either from MP or TCMP) FROM MY ORANGE SPV M500 TO MY MOTOROLA H3 BT HEADSET.
Please,please, please, could some genius out there save me and give me a concise answer (please don't just point me to another thread as I have done thread trawling for a month now).
Thanks in advance to anyone who can help!!!!!!!
You have to install the A2DP patch. There's a thread dedicated for this patch plus there are so many other threads discussing similar things. Please do a search.
By the way you can rename TCMPC (betaplayer) to wmplayer & put it in windows folder , but remote controll won`t working
Zerimar, I have looked for several days and can't find the patch for a stock orange M500 (+ swiss ROM update) running MW2003.
Can you point me in the right direction? or send me the patch?
And Rustos, what do you mean by "but remote controll won`t working". What functions won't work if I rename it?
Any help greatly appreciated!
I don't think this is possible with a mono headset on the Magician, with the normal bluetooth stack. Check out the thread regarding a new bluetooth stack (it says "stock" in the thread title).
V
Thanks for that vijay555, but that thread has a file called : BCHS_FOR_POCKET_PC_OZONE[1].ARMV4.CAB
When I put this the Windows/programs folder, then execute it installs then gives me an error message saying "this program might not work properly because it was designed for an earlier version of windows"
The BCHS program seems to do nothing.
What am I doing wrong, (are there other things I have to install) or do you know of any other way I can stream audio from my M500 to H3 headset (mono). I don't care which audio player (WMP or TCMP) I have to use.........
Thanks for you help so far.
it may say that, u gotta soft reset then go into bluetooth settings again and a host of new options will be available.
managed to get the program working and all the options did appear (re-install and then soft reset) but my headset is not listed in the drop down box. I tried all the configurations but no combination will actually send the audio to my headset.:x
Can anyone verify if this patch will work with mono headsets? or better still has anyone got this working with the Motorola H3?
How about the Bluesoleil BT stacK? Anyone tried it with a MONO BT headset?
Will that one work?
I think most probably the NEW STACK is only for A2DP ....
I want to get it to work with mono BT headset too....
Nevertheless, even the O2 Atom, Wizard , Prophet, and Universal ,cannot stream audio to mono BT headset.
only my HP hx4700 can do it~ MS BT stack sucks!
Related
I have purchased an O2 XDAII in Oz which is loaded with the 1.66 ROM. I have tried connecting two headsets to the phone over bluetooth with many problems.
Both seem to bond ok and work initially but later they fail - the XDAII doesn't respond to anything I press on the headset. Or the XDAII does respond (answer or end call) but no-one can hear me either through the headset or the phone.
Deleting and re-bonding seems to temporarily solve the matter. But if the XDAII goes to sleep and comes back on it stops working. Will also just stop working for no reason after a call or two is made or received.
I have tried installing the bluetooth tools which is cool because the XDAII can recognise some of those extra headset profile functions (like redial) but I still get the same problems as above.
Tried Plantronics M3000 and Motorola HS801
What can I do? Is it this Bluetooth stack problem from MS I have read about? Do I need a ROM upgrade? Do I need Widcomm something installed on the XDA II? I don't know how to do any of these myself. Any kind advice from a pro is appreciated in advance.
When you installed bluetooth tools did you delete any bonding and pairing of devices beforehand? it can make a difference if you havent done this.
Yes. I tried it twice thinking that maybe I might guess a way to make it work.
First I deleted the bonds after installing BT Tools and then rebonded.
Then I deleted the bonds before installing BT Tools and then rebonded.
I spoke to my Telstra dealer again today and they received a list from Brightpoint (a distributor) that matches various headsets against various PDA's available in Oz.
Not all BT headsets will work competently with all PDA's. The M3000 is marked as NOT compatible with the O2 XDA II available in OZ. So was the Motorola too.
I am now using a Hello II headset which so far is fantastic (very small and comfortable to wear) and is working with no modifications to the XDA. I will post back in a week with a fuller review. I'm going to re-install BT tools and see if that make a difference with the available functions.
Anyone else wanting to test these out in Perth, WA, (Australia) - they are available from Communications Plus.
Help
I can stop the sleep mode ... I have a MOTOROLA HS-801 Bluetooth Headset
Help
how can I stop the sleep mode ... I have a MOTOROLA HS-801 Bluetooth Headset
I had a problem with my Plantronics M3000 too so I called Plantronics themselves who said that the problem is with the phone, not the headset. It's a compatibility issue with the software.
Unlikely to be any fix, at least not in the near future.
UPDATED 11/12/05
Just to clarify. This patch enables you to launch Voice Command (or any other app) by pressing your bluetooth headset button. It DOES NOT transfer sytem audio to the headset OR allow you to issues Voice commands via the headset. Its still a top peice of work tho ;-)
Some people also have an issue where the BT headset audio receiver will stay on indefinitely using up its battery unless you place a call or turn it off.
I dont get this issue. YMMV!
--
rmg.
UPDATED 24/11/05
There is now a working patch to enable BT Audio streaming to STEREO BT headsets only.
http://forum.xda-developers.com/viewtopic.php?t=33532
This works fine with VCABT patch
--
rmg.
UPDATED 20/08/05
You need to be logged in to download the zip file!
--
rmg.
UPDATED 14/08/08
Dear all.
There is now a working hack to allow voice dial activation from a bluetooth headset.
NOTES
1. This hack DOES NOT transfer system audio to the headset via bluetooth. That is still being worked on.
2. This hack only works on the HTC Magician.
To date it has worked on all Magician types including:
iMate Jam
Qtek S100 S110
MDA Compact
Orange M500
VPA Compact
XDA MINI
Instructions:
Download the zip and install the cab file to enable the hack. Thats it!
Note:
The cab file will place a copy of voicecmd.exe in /windows and rename it to Voice Signal Launcher.exe
If you use another voice activation program you will have to copy the .exe, put it in /windows and rename it to Voice Signal Launcher.exe
If you have any questions not covered here please ask them in the thread and somewill help
Credits:
Hack created by Psneddon
Cab created by adamz
Scroll down to the bottom of the post to grab the file!
--
rmg.
Original post below:
Hi,
I am making a new thread for all discussion related to getting voice command working over bluetooth, i.e you push the button on your headset and the Voice Command activates.
This functionality has been achieved on the Eten M500, which uses the M$ bluetooth stack
See
http://translate.google.com/transla...&hl=en&ie=UTF-8&oe=UTF-8&prev=/language_tools
Stack the Bluetooth implemented in the Eten M500 has been realized from the same Eten on the base of stack the Microsoft.
The society has enriched it, and this is now in a position to offering the following profiles: Service Discovery, Headset and Hands-free, Dial-up, Object Exchange, Generic Access, Serial Port and Gateway-audio.
This last one is of great importance, since beyond guaranteeing I listen of the sounds of system or the reproduced MP3 in cap (optional), allows the operation of the application Voice Commander (about which we will speak in the next page), concurring to directly command the device from a Bluetooth earpiece.
E' instead absent profile PAN (Person Network Area), that it would have allowed the device to approach Internet in presneza of points of Bluetooth access.
Click to expand...
Click to collapse
We need a dump of the Eten M500 rom, and then we need someone with more braincells than me ;-) to extract the Bluetooth stack....
Is this possible / doable?
Click to expand...
Click to collapse
Yess please!!! That's what we've been waiting for the whole time!!!
Let's make it work, ppl!
Did you notice if your JAM is in sleep mode pusing button on the headset actually wakes it up? At least, that what happenes with my Bluespoon AX, also it supports last number dialing by pressing volume buttom fro more that 2 sec. It prooves that JAM understands keypresses on the headset! Even on pre-production MPX unit it worked with MS stack!
Did the MPX have the M$ stack?
It may be easier to get a rom dump of that rather than the ETEN,
IIRC it was only the pre production MPX's that enabled VC over BT?
Does anyone here own a Pre ProMPX or an Eten 500?
There are many people on HowardForums that have both phones.
The hard part is to get them to do it.
i can hang up a call with my scala500 bluetooth headset, it just will not answer.....
From what I can see on this translated page, ETEN has a bit more advanced bt stack than JAM. I am not sure, if that is MS newer stack or ETEN's customized stack. Either way, I want it.
as far as I know.. the BT stack used by E-Ten 500 is made by the same company that made the device....
I hope we can get this to work.... :wink: it's very nice to have something more advanced the stupid M$ BT stack...
Hello guys.I have an .exe file that is a firmware upgrade for Eten P700 that probably have the same bt stak that M500,because it is using voice command 1.5 from Cyberon.
If any one want to try to play with that .exe i can upload it to somewhere.
Can you upload it please to XDA-DEV ftp site?
Cyberon's Voice Commander is different from Microsoft Voice Command. Can anyone confirm that it's Voice Command from Microsoft that even supports this feature at all?
contribuition
I have a QTEK9090 but i think this happens in all models, so it could work on all models:
with the bluetooth headset ON, if you press ANSWER on the headset, if wakes the phone and you hear kind of a phoneline noise. I know the QTEK can't send/receive sound to/from bluetooth if its is not in a call (BT3900). What we have to try, is to build a program that accepts signal from the phoneline, like it would try to make a phone call so that bluetooth comunication is ON, and then listen to the micro to get the voice dialer message. Instead of trying to make the QTEK send/receive normal audio thruw BT, why not make a program that access the phone line to send/receive audio? the quality is not the same, but we could shurelly could voice dial at least.
I'm not a PPC programmer, but i've done some programs in other languages, so I have a programmer mind Hope this helps someone who knows how to program for this device.
byMaC
Here we go lads.It is english languaje. P700_V44 .zip 17711KB
ftp://xdaupload:[email protected]/P700_V44 .ZIP
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
User22 said:
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
Click to expand...
Click to collapse
I only have the 1.2 version
jackleung said:
User22 said:
BTW if any one can extract the cab´s files of cyberon voice command and post it i will apreciate it,because i still looking for version 1.5 to install it on my Qtek S100.
Click to expand...
Click to collapse
I only have the 1.2 version
Click to expand...
Click to collapse
Well,i mince stracting from the firmware that i allready uploaded.
Any news about extracting something from that file ???
Please Please Please Please can any developer who is willing to help with this head over to HoFo and this thread:
http://www.howardforums.com/showthread.php?t=655524
Where there are several ETEN 500 owners ready to help.
To reiterate, the plan is to find a way to dump the ETEN ROM, and then have a look and try to work out how they enriched the M$ BT stack to allow Voice Command to work over Bluetooth.
Many thanks.
--
rmg.
I have n eten M500. Jus tell me what exactly i haveta do and i will do all that i can.
Can you dump out a copy of the bluetooth stack?
I'm not an expert...mm...hope some one can give you the right advice!
I dunno if there is a way to put in a cab the installation..however do exist something like an upgrade? I mean on the Eten cd there is something like a bluetooth upgrade or something helpfull?
Hoping someone can direct this hack.
Come on, we've got a chance! There's a user who want to help us...
Hi All. i've got a qtek 9000 and i can't use my bt headphones.
I bought this one with the ipaq and than i succed using it also with my qtek 9090
right now i can't with the new 9000 and i have no idea how to do it
please can someone help me?
Please be more specific as to where the problem is. You say you got it working on the 9090 but not on the 9000. Exactly what part of the pairing process does the difference come out?
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Barinight.com said:
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Click to expand...
Click to collapse
You mean it cannot be paired without running a particular software? Yikes... So when you put the Bluetooth headset to discoverable mode, then try detecting it from the Universal, it sees it but there are just no services available, am I right?
So it seems that the one at fault is the Bluetooth stack installed in the Universal... In that case, I cannot help you... SOrry
The Universal does not support A2DP or what HP calls High Quality Stereo, as such it does not support your headphones. A2DP is suppose to be part of what is included in the MSFP update but i-mate has chosen not to include it. Until someone releases A2DP support your headphones will not work. Now if you happen to read German I understand their is a German ROM that supports this feature.
Otherwise it just a question of waiting till someone releases this update, if they do.
i think that is the stack but the question is:
the 9090 doesn't support the high quality too but installing the driver things changes so i won't belive that thare isn't a driver for the 9000
i tried to find something from Widcom (i hope is the right way to write!) nut i dind't find anythink
so i hope that someone can help me because i've payed 120€ the headset and i will love to continue using it!
Hi, i'm looking for a way to connect my Nokia 6230 to my Wizard so that the Wizard is recognized by the Nokia as headset. Does anyone know if this is possible?
I've been looking at the widcom/broadcom stack but i couldn't get it to work yet. Insufficient memory error.
Does anyone know if this is somehow possible?
I dont think this works. However I have done the reverse using my Laptop. I used my laptop to take calls and answer them, while my PDA is in the other room! w00t
And do you think it would be possible if we get the broadcom/widcom stack running on the Wizard?
No. I dont think that has the correct services/profiles. And is it possible to get the widcomm stack on the Wizard? Doesn't it already have the microsoft stack on it?
Thanks
how did u answer the calls on your lap top??? thats awesome wanna share? thank you!
my email address is [email protected]
To be a "headset" for another device, you need the "Audio Gateway" profile.
Most desktop adapters support this profile (the Widcom stack does), so your desktop or laptop PC can be a headset for your phone. I've used this as a speakerphone when we were doing something in a class. It's pretty slick.
The Wizard does NOT have the Audio Gateway profile, so it cannot be the speakers or mic for another device.
However, SOME of the Ipaq PDA's can do this. I've done it with a Bluetooth-Equipped Ipaq, so I know that, at least in theory, it IS possible.
TomXP411 thanks. You basically explained it for beckhams777...
PDAs that are not a phone themselves are usually the ones that have this profile. If you find a device that has this profile AND uses the Widcomm stack, I may be able to extract this profile and use it on other devices also. It also depends on what version of widcomm stack they use... But, it could well be possible now that I know some other devices can do it
Thanks
I'll go searching 8)
got it! thanks anyways!
T-mobile MDA (USA version) and Bt
Ok, read all the posts, so there isn't a way to use my bt earbud with music on my MDA?
it worls great for phone, but MDA does NOT have audio gateway software
Al
When I pair with my Mac (OS X 10.4), the mac does discover bluetooth audio as a service on the wizard... however when i try to send sound, OS X states that it could not connect to the BT Audio device... So in theory it should be possible, if the service is discovered. We perhaps just need an app on the wizard that responds to the connection request...
Do anyone have working widcom stack for artemis? I read in helmi's universal forum that it could be done via some reg changes. Made it anyone working. I'm gonna give it a try. Keep fingers crossed
didn't have time to try everything.
download
KING HELMI_C's widcomm stack
install
ad following registry entries:
Code:
unfortunately too long post :mad: so check the .reg included
I just finished so far I tried
filetransfer Orbit <> Universal works
AD2P (or whats name bt stereo) Orbit<> Moto HT820
AVPRC (or whats name remote control - next,previous,pause,play) Orbit<> Moto HT 820 (using m$hit media player) works
PAN not yet
Headset not yet.
regfile included.
to Helmi: I posted this in artemis upgrade forum as well
please feel free to post or PM or mail me any bugs.....
BTW: I'm using O2 Orbit - Arte200
Sorry for noob question ... but what is the difference betwin Original one and Widcom?
Cheers ...
check menneisys (soory for misspelling) posts somewhere in General/networking
it has more bt profiles at least
pnsnake:
Are you with helmi also working on this hack?
Your widcom stack made for universal works on artemis as well?
Do I simpy follow the same procedure described by you on the link specified by you?
Apps such as Sniper, which require widcom/broadcom stack, will work on Artemis, as with MS stack it is not?
For newbies here is the article from pocketpcmag.com blog about the difference:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1649&more=1&c=1&tb=1&pb=1#more1649
dont know, i'm just trying to port it for arte, my Universal is running with Widcomm, so i decided to port it to my Orbit.
So far A2DP,AVCPR is working, file transfer, serial port are working. Headset profile not yet. I'm still trying to figure it out. Maybe Helmi will help.
so far i can transfer all sound from phone to my moto ht820 but not yet phonecalls
Tnx for quick reply. Guess I will try it out. I hope it is easy to remove it and come back to default settings (ms stack). I don't need bluetooth profiles, neither plan on using bt earphones.
File transfer (both ways), bluetooth sync and modem are indeed required. Hope it works.
I have a big problem. I tried this stack and bluetoothe works fine but GPS stoped working. If I uninstall it and try to activate MS Bluetooth stack, bluetooth stops working. So I have to decide: Bluetooth or GPS.
Is there any possibility to reactivate the MS Bluetooth stack?
Ah, I do have WM6 btw...
I was looking at a fix to get my car working with my WM6 Artemis, and thinking of trying the Widcomm stack. However, reading through this thread am I right in understanding that this version of the Widcomm stack won't yet support hands-free kits anyway?