Related
after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..
The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.
slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.
How do I run this file?
Thanks
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...
Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Unfortunately, it doesn't work well, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?
sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.
Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks
hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..
hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,
Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!
I am trying to save phone history but have not suceeded.
have tried "PIM Backup" it shows its saving the backup with History (call Logs), Contacts, Sms. But when I restore, Only contacts are restored but not the Call History.
I am using Faria Mobile 6 (Crossbow) on my Qtek 9100.
Please suggest appropriate software workable.
aamer said:
I am trying to save phone history but have not suceeded.
have tried "PIM Backup" it shows its saving the backup with History (call Logs), Contacts, Sms. But when I restore, Only contacts are restored but not the Call History.
I am using Faria Mobile 6 (Crossbow) on my Qtek 9100.
Please suggest appropriate software workable.
Click to expand...
Click to collapse
Active Sync--> Explore Pocket PC--> CallTimes (directory)
Copy the BSCallTimes.xml to your desktop or where ever.
--M
demontefixo said:
Active Sync--> Explore Pocket PC--> CallTimes (directory)
Copy the BSCallTimes.xml to your desktop or where ever.
--M
Click to expand...
Click to collapse
There is no such directory by the name of CallTimes.
or BSCallTimes.xml I have checked the hidden and systemfiles also.
could you please advise the exact file name and its location.
Your help is much appreciated
aamer said:
There is no such directory by the name of CallTimes.
or BSCallTimes.xml I have checked the hidden and systemfiles also.
could you please advise the exact file name and its location.
Your help is much appreciated
Click to expand...
Click to collapse
Pim backup has been fixed, you can use versio 1.3, it works!
Cheers,
.Fred
.Fred
Thx bro you have solved a big issue for me.
Thank You again
aamer said:
There is no such directory by the name of CallTimes.
or BSCallTimes.xml I have checked the hidden and systemfiles also.
could you please advise the exact file name and its location.
Your help is much appreciated
Click to expand...
Click to collapse
Weird. It is on mine... hmm.
--M
aamer said:
.Fred
Thx bro you have solved a big issue for me.
Thank You again
Click to expand...
Click to collapse
Cool glad you got it worked out.
--M
demontefixo said:
Weird. It is on mine... hmm.
--M
Click to expand...
Click to collapse
demontefixo
I thank you also, for trying to help me out.
I still have not been able to locte the folder and file you mentioned, dont know what and where am doing the mistake.
thx agoin bro
regards
aamer
aamer said:
demontefixo
I thank you also, for trying to help me out.
I still have not been able to locte the folder and file you mentioned, dont know what and where am doing the mistake.
thx agoin bro
regards
aamer
Click to expand...
Click to collapse
When you explore the phone, are your settings set to view "hidden"? Glad to (try) help
--M
Does any one know a way to disable the GPRS?, there is no option
gepol said:
Does any one know a way to disable the GPRS?, there is no option
Click to expand...
Click to collapse
Modaco has this little but useful which completely address your query. Download and install the cab file.
Note: Can be installed to Storage Card.
Good luck!
Hello, I was really desperate, I do not know how I can uninstall programs. Is there a program through which I could remove the applications and programs? really thanks for Answers.
go to settings -system-remove programs
Are you for real !? How can you not have found this, even by chance ?? Failing that RTFM !!!!
Saitek192 said:
Hello, I was really desperate, I do not know how I can uninstall programs. Is there a program through which I could remove the applications and programs? really thanks for Answers.
Click to expand...
Click to collapse
Start - Settings - System - Remove Programs (not for coocked-in progs, they are uninstalleble...)