Related
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Works fine for me mate..
Things to check.
1) XDAII Has an ip address assigned to it within the correct subnet for your home wifi.
2) XDAII Has the correct default gateway configured which will either be your wireless access router, or another type of router you have that provides internet access.
3) That your XDAII can see the network available to it through the start, setting, connections, connections, advanced, network card bit. Make sure that you actually tell it to connect to your network too. If you can't see it and you are sure the wifi card is installed ok, make sure that you have enabled SSID broadcast on your WAP.
Let us know how you get on.
Rgds,
Rob.
rob,
what do you mean, "make sure you have sidd enabled on you wap" ??
i have beeb trying to get this to work for days..
lmk m8
Zetex
He means..
He means that your Wireless accesspoint should have broadcast SSID enabled. If you have not intentionaly disabled it, it is most likely that it is enabled and thus not the issue. Is your wireless WEP encrypted? If it is, did the Pocketpc ask you specifically for the WEP encryption key when it found your network?
- Johan
Bizmarty said:
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Click to expand...
Click to collapse
----------------------------------
I am using a XDA II. Having received a faulty 'backpack', now replaced, I am still trying to get it to connect through a Sandisk CF Wi-Fi card to a D-Link 900+ AP hanging off an Intel router and my Linux server. In desperation I connected the CF card through a PCMICA adaptor into my notebook. After tweaking the 900+ AP (using v. 2.61 firmware), I found that it liked 64kb WEP, SSID on, Channel 11, Infrastructure (not Ad Hoc), and left on fully automatic so D-Link 650 Wi-Fi card in my notebook runs at 22 Mbps, and the Sandisk card at 11 Mbps.
But does it run in the XDA II you ask? Nope! I think that Sandisk's software leaves a lot to be desired. I am using vxIPConfig and vxUtil tools to see what is what ... but to no effect. I would gladly flick the Sandisk card now I know their software is lacking.
Any clues from other users?
Driving me nuts
Sorry not to actually come up with answers, but I thought you might gather some comfort from the fact that my XDA II/Sandisk combo is driving me nuts too. You are not alone....!
First thing I did was remove the pre-installed Socket wifi s/w and install the Sandisk stuff, but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Am going to review some of the other helpful posts here and try the tips and will report back......!
SMW1
Re: Driving me nuts
SMW1 said:
... but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Click to expand...
Click to collapse
The CD-ROM that came with mine seems to have been designed for WinCE, and not Mobile Windows 2003 for the PPC. As a result I cannot get rid of the Sandisk 128M+WiFi CompactFlash Card settings from the 'Configure Network Adaptors' area. I have to go in via my PC and ActiveSync (3.7) and rename the two offending .dll files before the CD-ROM software removes the drivers. I manually delete the renamed .dll.old files from the XDA II.
Sandisk seem pretty useless. I let them know of these problems and the link they gave me was to the straight wireless LAN card ... That didn't work, so go figure!
I am told the Sockets drivers out of the UK are better (for basically the same card), however, their FTP site does not work .. some say it hasn't worked since April 2004. More useless information, except that their docs. leave Sandisk for dead!
I keep wondering what the so-called 'Zero Configuration' tools that are supposed to be part of Mobile Windows 2003 actually do? I just can't see why the Sandisk card works with my D-Link DWL-900AP+ (802.11b/g) and with my ancient Airport access points on my notebook, but not on the XDA II on the rare occasions that I get the blinking green light (very rare and I don't know why???). <sigh!>
I am still having troubles getting my XDA II's (running Windows Pocket PC 2003) Sandisk Cf Wi-Fi card to do anything more than just blink. I have given up on using it with my D-Link DWL-900 AP+ access point, and now resurrected an old Airport running at 11 Mbps. The Sandisk card works fine in my notebook with both access points.
Yes, I have asked Sandisk what gives ... but no reply to date. Trouble is, I don't see the things that Sandisk's Pocket PC Troubleshooting guide (which comes on the CD-ROM from them) says I should, e.g., a Wi-Fi singal icon.
I don't think its WEP/SSID issues ... just plain old hardware connectivity coupled with the seemingly weak software from Sandisk.
I sure would appreciate some advice.
Ciao,
Try the socket drivers. It is the same card as the Sandisk but I find their driver much better. Works well for me never had any issues connecting anywhere. Socket Driver, Sandisk Card. Just make sure you get rid of ALL of the Sandisk driver from your XDAII.
I have a SD card but you might want to try for the CF.
http://www.socketcom.com/product/wlan.asp
www.socketcom.com
Also has some very good pdf manuals not like the nothing for the sandisk.
Good Luck
drj said:
Try the socket drivers. It
Click to expand...
Click to collapse
Thanks for this ... I FTP'd the Sockets driver over from the UK and installed ... Yes, I get a blinking green light. So now it is a matter of setting up the Access Point(s) to suit the Sandisk CF Wi-Fi card in the XDA II. As I said, it works no problems with both my APs in my notebook, so I will get there.
I had a dreadfully incorrect reply from Sandisk technical help ... so much so that I will now buy another brand (Sockets) and trash the Sandisk.
I'll keep you posted. :!:
For what it's worth, I use the Dell TruMobile CF WiFi card in my backpack and find it works very well. Also like the bundled access software, was easy to install and find it easy to use.
ednap said:
Dell TruMobile CF WiFi card in my backpack.
Click to expand...
Click to collapse
Perhaps you could let me know if there are any particular settings on the Access Point that the CF card favours:
Does it work with 802.11 b/g APs set to AUTO (I know it is only an 11 Mbps card)
SSID - on/off
WEP - on/off
MAC - on/off
Any other advice on settings?
Did anyone else notice this registry entry?
[HKLM\Comm\TIACXWLN1\Params]
"EnableElpMode"=dword:00000000
If I'm not mistaken, the TyTn has a TI ACX100 WiFi chip, and this chip has TI's "Enhanced Low Power(tm) Technology". I've enabled it on my TyTn, and so far it seems to do no harm. I'll have to see if my battery power improves over the next week.
Correction...
Ah, the htc TyTn has TI's TNETW1250 chip. My mistake.
In any case, I think the EnableElpMode (if it really does work) would be a good thing. Also, I've seen a few webpages suggesting an additional key:
"dot11SupportedRateMaskG"=dword:00000008
Apparently this key tells the driver it's okay to do any 802.11g speed. I'm going to go find out!
let us know how it goes....
1st set of test results
First, I should detail the equipment I'm using.
My wifi router: D-Link 624.
My phone: htc TyTn, QTEK ROM 1.35.255.2 (Radio 1.18.00.10)
My laptop: IBM Thinkpad T22, w/ Hawking Techmologies HWC54D wifi card, Win2k.
My PC: P4 2.4GHz, asus P4P800 (has Gb lan), WinXP.
Results so far: (using http://www.bandwidthplace.com/speedtest, and sitting right next to my DI624)
PC: 5.3 Mb/s
Laptop (w/wifi): 3.4 Mb/s
TyTn: ~250 kb/s
Notes:
In one test I set the DI624 to use 802.11g only. Without any registry tweaks, the TyTn connected up just fine. Therefore, I suspect that the dot11SupportedRateMaskG key is no longer needed.
Curious to see if I could boost the TyTn's wifi speed, I began fiddling with all of the different registry settings under that heading (listed above). The wifi speed always hovered in the 250 kb/s range. It seems as though none of those settings significantly changed the wifi speed.
There was one key that did make a big difference in the time it take to actually connect up to the wifi router. Setting "dot11ShortPreambleInvoked" to 1 greatly sped up the time from wifi-off to wifi-connected-and-ready. (My DI624 was also configured for a short preamble.) Without the short preamble, it was taking between 10-30 seconds for the TyTn to connect up. With the short preamble it's between 5-10 seconds.
(Side note: The "Testmode" key didn't seem to do anything - at least I didn't see any difference when I set that to 1.)
One other key that did make a small difference:
[HKLM\Comm\Tcpip\Params]
"TCPWindowSize"=65536
I played around with this key, and it seems like setting it to 4096 "optimized" it just a bit. I got around 270 kb/s with that setting. Setting it bigger (say, 256k) slowed things down (~240 kb/s), while setting it smaller (say, 1k) really slowed things down (~170 kb/s!).
I'm going to continue fiddling around with the settings and report back again. It just seems to me that the TyTn should be able to achieve a wifi speed at least above 1 Mb/s. I would appreciate it if everyone else would check their wifi speed and post the results here as well.
p.s. If anyone knows of a PocketPC utility that can show detailed wifi connection information (such as speed, frequency, protocol, etc.) please let me know!
250 kpbs, that cant be correct? can it?
that would mean that HSDPA is faster than hermes wifi? I will test mine when my wife gives it back to me, im grounded for the holiday season. lol
something is terribly wrong here......
yes, there is something wrong here... I think you need to turn on flight mode before you run your wireless test again, and here is why... On my phone i have my data connection set to always on. If i turn on wifi then my data connection doesnt disconnect and will result in low speeds since its not using the wifi. If i turn mine on flight mode then run tests then everything is good. Here is my results using the same site as the OP
PC = 1.9
phone = 1.4
I am using a 3meg adsl pipe with a wireless SMC router with mac filtering, regular wep, and a static set up on the LAN side.
Progress!
I changed my wifi speed test to: http://www.dslreports.com/mspeed
Surprisingly, that speed test reported 1647 kb/s for my TyTn!
Fiddling with the TCPWindowSize value, it seems that 64k is optimum - well, at least with the dslreports test.
i usually use dsl reports, but i wanted to maintain some kind of constant for your testing
Wireless settings / b-g connections
Hi, I;ve just got a TyTn but it won't connect to my Netgear 802.11g router?? Is it b-only? Is there a hack (like for the Universal) which would enable me to connect to g networks? Would I still be able to connect to b-networks?
Thanks!
motoroller said:
I;ve just got a TyTn but it won't connect to my Netgear 802.11g router??
Click to expand...
Click to collapse
My TyTn is fairly new (bought last month) and I can configure my DI624 to 802.11g only, and connect up just fine. What ROM version does your TyTn have? I'm on the QTEK 1.35.255.2 ROM. If you TyTn is right-out-of-the-box, it's probably got the QTEK 1.18.xxx.x. If that's so, you should consider unlocking it and upgrading it to one of the latest ROMs.
motoroller said:
Is it b-only?
Click to expand...
Click to collapse
The htc TyTn (Hermes) has the TI TNETW1250 wifi chip. This chip is 802.11g capable.
motoroller said:
Is there a hack (like for the Universal) which would enable me to connect to g networks?
Click to expand...
Click to collapse
You can try adding this registry key (although I'm not sure it will do anything on the TyTn):
[HKLM\Comm\TIACXWLN1\Params]
"dot11SupportedRateMaskG"=dword:00000008
motoroller said:
Would I still be able to connect to b-networks?
Click to expand...
Click to collapse
Yes. Wifi chips that support 802.11g always support 802.11b (AFAIK).
Good luck!
shogunmark said:
i usually use dsl reports, but i wanted to maintain some kind of constant for your testing
Click to expand...
Click to collapse
Yeah, after checking out several speed test websites, I'm beginning to doubt the one on bandwidthplace. Actually, while testing out several other speed test websites using my PC, I've gotten a smattering of different speeds reported. Most seemed to be within reason and about what I expected, but a few were either obviously too slow or absurdly too high. (Ony reported above 100 Mb/s downstream, even though my cable modem is a DCM-202!) The dslreport site seemed to be believable to me, so I'm sticking with it for now.
If it makes you feel better i work for AT&T in the DSL maintenance department and have for 6 years.. anytime i have anyone that reports slow speed issues i always take them to dslreports and use those speedtests.. they seem to be the most reliable that i have found..
Okay, I'll trust dslreports' speed test then!
So now the question is: Does a wifi speed of ~1600 kb/s sound "right" for the TyTn?
What makes me wonder is that when I run the dslreports speed test on my laptop via wifi, I get ~3.2 Mb/s. So I know my DI624 can pump out the bits! (Well, for 802.11g's max of 54 Mb/s, that's still kinna lame.)
I've pretty much exhausted all of the registry settings I can find. Got any others I can/should look into?
there are other things you need to take into account, the processor, the amount of ram, etc.. when you run a speed test it rely's on your pc to process the information as it comes down the pipe... if you really wanted to test it you could build a pc that resembled the phones specs and run a speed test and see what you get.. i would make a bet that it would resemble the same results
Do you know any registry key to improve the wifi trasnimt power?
onlineemails said:
Do you know any registry key to improve the wifi trasnimt power?
Click to expand...
Click to collapse
have you already went to settings>connections>wireless lan>power mode tab and changed the slider to best performance?
did it but no effects
Wi-Fi Reg Setting
I went through this post and compared the results to waht I have right now! Not too encouraging!
I have a 4MB connection rated at average to be a 3.5MB at www.speakeasy.net/speedtest using the New York Host!
Wi-Fi Reg Setting
I went through this post and compared the results to waht I have right now! Not too encouraging!
I have a 4MB connection rated at average to be a 3.5MB at www.speakeasy.net/speedtest using the New York Host!
I run a WRT54G with upgraded firmware downloaded from kinksys. Before that the damn thing wouldn't even connect to my TYTN.
Right now I am getting connection speeds through WiFi between 650kbps and 1200 kbps according to www.2wire.com speed test.
I have a Dopod 838Pro bought in HK in November to which I didn't do a Thing yet!
Cheers
Is 1.6 Mb/s the best TyTn can do?
Well I've fiddled with all the registry settings I could possibly fiddle with, and dslreports won't show anything above 1.6 Mb/s for on my TyTn (using PIE).
Has anyone gotten anything higher with their TyTn?
Ok, I could never get the "internet sharing" to work on x1 with my friends laptop cause i dont have the drivers...so always used Wifirouter.
I find it a little slow, but it works and does work well. However, I read that the x1 supports "HSDPA, 7.2 Mbps; HSUPA, 2 Mbps" ...but i dont get speeds like that.
If somebody has the files required for connecting the x1 to a laptop and use internet sharing instead of wifirouter...can you upload and post it here? I will then keep them on my storage card for safe keeping.
Also, how do you find internet sharing? Is there any difference in speed compared to wifirouter?
Any help or advice would be great, cheers guy!
I think HSDPA is simply network dependent -when its there you get an H symbol on your signal strength (taskbar) ...when its not there you get the next best thing (3G) and if that's not available you're stuck with plain old slow GPRS (G)
Internet sharing works well for me (obviously depends on the connection you have on the X1 -as above) ...have not used wifirouter so can't say how they compare
7.2 Mbps is theoretical maximum. Your provider is not obliged to provide you with this speed. I get about 1 Mbps for download.
Actually you don't need special drivers for the X1 in order to use tethering. Just connect the X1 to a PC using an USB cable and start the "Internet Sharing" Application on the Xperia. Within the application select "USB Connection" and choose your preconfigured ISP connection profile - é voilà. You will notice that the Xperia appears as a network adapter on the PC. I use that a lot.
Regarding the speed: It really depends on your mobile network. Though my network provider (Vodafone Germany) has some spots where 7,2 MBit/s should be available, I have never had such fast download rates - it's more like 2-3 MBit/s which is still quite okay for me. And even if the network would be capable of such fast transfer rates, the speed will be reduced by the more clients use the same cell.
I also read somewhere (guess it was on SE offical site) that using HSDPA and HSUPA together will limit the download speed to 3,6 MBit/s. So you might want to switch HSUPA off and use HSDPA only - at least it's worth a try if you're sure that your operator provides such fast transfer rates. I always have both switched on.
Nice, 2-3mbps is a lot faster than i was getting...i guess i will need to try this out.
Regarding my friends laptop, maybe i should have said its win xp but it doesnt have active sync or any x1 soft installed...so maybe thats why its looks for the drivers?
Basically i was wondering if you guys knew where i could get the drivers keep them on my phone for times when im out and can get my proper internet fix
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
I've started using WMwifirouter now though as it's easier, I don't carry a USB cable with me all the time, and you never know when it'll come in useful!
Random example... me and a couple of mates decided to learn some songs to play at our local, we had chords and lyrics for all except one, we were in a garage, my mate had his macbook, but couldn't pick up his wifi.
I started WMwifirouter and voila!
Speed wise, I usually get around 1Mbps, depending on signal etc, I've seen no difference between USB and wifi sharing.
How is the battery consumption when using WMWifiRouter, e.g. how long does the battery last? I can imagine this is the worst use-case at all, because you have WiFi active and HSDPA in parallel.
The big advantage when using an USB connection is that the battery is charging while it's connected, though the WiFi method is much more comfortable and flexible.
you do know that 7.2Mbps mega bits per sec? and not megabytes.
sidneylopsides said:
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
I've started using WMwifirouter now though as it's easier, I don't carry a USB cable with me all the time, and you never know when it'll come in useful!
Random example... me and a couple of mates decided to learn some songs to play at our local, we had chords and lyrics for all except one, we were in a garage, my mate had his macbook, but couldn't pick up his wifi.
I started WMwifirouter and voila!
Speed wise, I usually get around 1Mbps, depending on signal etc, I've seen no difference between USB and wifi sharing.
Click to expand...
Click to collapse
Actually you do not need a cable, you can have the phone to act as a bluetooth modem through the internet connection sharing , no drivers required what so ever, you will need to pair your phone with the laptop first make sure, that Bluetooth PAN client is checked on the laptop, then start the internet connection sharing on the phone and make sure that you are using bluetooth PAN, and you will have instant access on your laptop, No drivers, No cables
assuming the laptop has bluetooth
wifi is much more standard, so it's handy to have.
The best part here is non of these mrthods are mutually exclusive, so you can use whichever is best for the situation. USB is handy as ICS does drain power, using wifi for it makes my X1 extremely warm...
foo said:
... using HSDPA and HSUPA together will limit the download speed to 3,6 MBit/s. So you might want to switch HSUPA off and use HSDPA only...
Click to expand...
Click to collapse
You're right!
sidneylopsides said:
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
Click to expand...
Click to collapse
Yes, thats what comes up...but it wont auto install. Tried it on three laptops and they all wont work haha. I rebuilt the machines/laptops so even tho all drivers are installed (device manager)...maybe i left some out.
I was hoping somebody on the forum would know where i can find these drivers?
I know this sounds stupid...sorry
Generic NDIS is one of the system files in windows found under system32, windows will not boot even in safe mode if these drivers are not loaded, ICS works fine as far as i can tell with no extra drivers on any windows XP or later
i downloaded this;
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
but its from 2005
I hope it works
Ive owned my x1 for about 6months, I have unlimited pda data plan but not tethering plan with my carrier. For some reason I can teather my x1 to my eeePC 901 via USB,but not BT,and get internet when Im not in a wifi spot. It does give me the BT PAN option and my devices are paired but cant get internet connection, only thru USB. Ive tried this multi times for over a month now and have not been charged any data usage or overage on my bill.
I was about to do the r3a update, but was wondering if there was any ninja fixes in this update. Id hate to lose this ability just for a little faster performance.
just use wmwifirouter bro
ActiveSync installation provides the ICS drivers
fracmo2000 said:
Yes, thats what comes up...but it wont auto install. Tried it on three laptops and they all wont work haha. I rebuilt the machines/laptops so even tho all drivers are installed (device manager)...maybe i left some out.
I was hoping somebody on the forum would know where i can find these drivers?
I know this sounds stupid...sorry
Click to expand...
Click to collapse
You DO need ActiveSync to be installed before you can use your X1 for ICS.
I tested it yesterday on my Windows XP SP3 laptop: When you connect your WM6 mobile with the ICS program running on it, WinXP demands for a plain Generic NDIS driver but won't find a suitable one. But during ActiveSync installation (version 4.5 worked for me), the USB drivers are updated, and afterwards my X1 got recognized as a "Windows Mobile Internet Connection Sharing Device" or something like that.
ActiveSync is not active during ICS session, but its prior installation is mandatory for it to work.
Greetings,
MiK
Is anyone else getting this problem with internet explorer? Web pages takes forever to load whereas the stock browser on android was much faster. Do you guys have any suggestion on how to fix this, since i have tested the speed at multiple places and still getting the same slow result.
Actually,I found it faster.
Sent from my HD2 running Android on NAND
I thought the internet speeds were very close to what I had on Android
Sent from my HD4.5 using Board Express
what the heck
Thats weird i did all the steps correctly using the guides i dont know its so slow... did you guys do anything special on your phone?
Fasty12 said:
Is anyone else getting this problem with internet explorer? Web pages takes forever to load whereas the stock browser on android was much faster. Do you guys have any suggestion on how to fix this, since i have tested the speed at multiple places and still getting the same slow result.
Click to expand...
Click to collapse
I'm with the same problem...
Do you gave 3G disabled, maybe Without 3G web pages would surely be a pain to use.
For me personally IE works like a charm. If this thing would have a password manager it would be my personal favourite mobile browser.
Fasty12 said:
Thats weird i did all the steps correctly using the guides i dont know its so slow... did you guys do anything special on your phone?
Click to expand...
Click to collapse
check your APN settings, should show:
APN - epc.tmobile.com
Username - none
password - ****
Oh forgot to mention that i dont have a data plan, use mainly wifi for my internet needs
Navigon downloaded yesterday some 400 MB of maps through my home WiFi and it took no more than 5 min. As i'm on 12 Mbit ADSL I guess WiFi speed is more than OK on WP7.
Never tried IE Mobile through WiFi cause I'm on unlimited data and it makes no sense to use WiFi.
TheOnly1 said:
Navigon downloaded yesterday some 400 MB of maps through my home WiFi and it took no more than 5 min. As i'm on 12 Mbit ADSL I guess WiFi speed is more than OK on WP7.
Never tried IE Mobile through WiFi cause I'm on unlimited data and it makes no sense to use WiFi.
Click to expand...
Click to collapse
After upgrading from a 1GB card to an 8GB card I have also a very slow internet connection.
I tried to download maps for Navigon and failed because less storage space.
After changing to an other 8GB µSD card (do a software hardreset & reconfigure my device) I mentioned that syncspeed & downloads are very slow (ethernet & WiFi).
The download of Navigon maps takes aprox. 6 hours. :-( ==> (8Mbit Internet connection)
mobile HSDPA connection seems ok.
speed was awesome withouth sd card for me, with sd card the phone seems to be very slow overall