Related
I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....
Hi, maybe someone could be of any help
I tried out allready a lot and do not see a light at the end of the tunnel.
I am trying to get a TyTn to connect to CISCO APs using WPA with LEAP or PEAP or WPA-PSK and i do not manage to get it connected. The TyTn "sees" the network (SSID is hidden), tries to connect but did not manage to get connected. I tried with allmost any ROM available here. At the moment i am using the I-Mate on:
ROM version: 1.20.305.3
ROM date: 07/21/06
Radio version: 1.07.03.10
Protocol version: 32.41.7010.02H
Any help would be appreciated
Same problem here w/the Cingular 8525 and Cisco AP
Been the Cingular 8525 the same as the HTC TyTN, and using Cisco AP's at work I'm experiencing the same problems here.
The Cisco AP log shows a failure on the TCP/IP handshake when my 8525 tries to authenticate. We're also using WPA-PSK. Cisco support analyzed the log and found no explanation on why it cannot complete the 3 way handshake.
I can use WPA-PSK in my home network with a D-LINK DI-524 w/o any problems.
The next test will be to try a Linksys/Cisco router and WPA-PSK at a friends place, also I will try WEP (just for testing) at work and if I can w/o any encryption on the Cisco AP that is giving me problems.
I'll also try contacting HTC Support.
Thanks to anyone that could help, I will post any results of my tests.
Cyberg
The Wizard doesn't seem to support AES. Maybe other HTC devices have the same problem. I've also had trouble with routers running in dual AES/TKIP mode. Try setting TKIP only.
WM5 does not support AES. WM6 supports!!!
Entering the following line in the Cisco AP Config fixed it for me:
dot11 wpa handshake timeout 1000
I too am having troubles with the tytn and cisco AP's.
Ive done some testing
Encryption: none works
Encryption: WEP64/128 works when entering code in HEX
Encryption: WPA-PSK (HEX KEY, 64 digits) works
Encryption: WPA-PSK (ascii, 8-63 digits) FAILS
I will try the dot11 wpa handshake timeout 1000 later today, hope it fixes it.
Also noticed that my Hermes won't connect to my parents router (SSID hidden, WPA-PSK of about 16 digits). Somewhat frustrating, but never mind. Router in question is a Thomson Speedtouch 5xx (can't remember exact model number).
Go into Wireless LAN & Power Mode & max it out to Best Performance.
Same problem here... with my Tytn and an old 3com OfficeConnect b.
No way to enable WEP encryption (authentification will always fail).
Working perfect now with data encryption disabled: connection security made by letting only authorized mac-address to connect.
This way is also more secure than WEP encryption, am I right?
I will try the dot11 wpa handshake timeout 1000 later today, hope it fixes it.
Click to expand...
Click to collapse
Go into Wireless LAN & Power Mode & max it out to Best Performance.
Click to expand...
Click to collapse
Neither of these fixed it.
Its like the Hermes will only accept 64bit Hex key, which is fine but one of my other devices will only accept upto 63bit Ascii key
I had issues with my Cisco 1100 AP's and read somewhere on Cisco's website that QoS must be disabled on the Radio interface to get WPA/WPA2 to work:
Code:
interface Dot11Radio0
no dot11 qos mode
It worked for me
Andy
ADB100: Tried your code, still not working
Ive gotten WPA to work but only when useing the full 64digit key in HEX,
I think the Tytn has troubles with using ascii in WPA.
I had the same problem as the starter of this topic with Linksys WAG200G router, just couldn't set up to connect with WPA, so I switched back to disabled security with restriced access on trusted MAC address, and now it works like a charm.
WPA-PSK
Works for me. I have a Linksys WRT54G, and an 1100 AP. Connects to either of them seamlessly.
Just to add some more info in case anyone else stumbles on this thread.. had very same issues with WM5 on stock Hermes (T-Mobile VarioII). Had to unprotect the netork and rely on MAC filtering
Installing WM6 using Black 2.5 (now on 3.0) sorted the problem immediately. It seems some routers expect certain things from the device when using encryption that WM5 can't always provide (AES has already been mentioned). Yet another god reason to upgrade to WM6
Router here is Philips SNB 5600.
Hi
I'm having a similar problem with my Orange M700 (HTC Prophet) and Netgear DG834G.
Anyone any great ideas???
Andy
Using a T-mobile MDA Wiz200 w/ WPA-PSK, the correct encryption key, the latest ROM update, and 802.11g enabled, I cannot login to a network with WPA-PSK encryption. That WPA-PSK network does not require a certificate or smart card. The network is detected, MDA tries repeatedly to connect, but no IP address is provided. I can login to Open, WEP encrypted access points, and T-Mobile Hotspots with no problems.
With WPA-PSK enabled, if I click Settings, Connections, Network cards, the access points name, and 802.1x, the checkbox for 802.1x network access control can't be unchecked, although a checkbox is displayed. I believe this is the problem because when I use my HP laptop's built in wireless and uncheck the same 802.1x network access control option, I can login to the WPA-PSK encrypted network with no difficulties.
Question: Does anyone have a hack or suggestion for a way to allow the IEEE 802.1x network access control requirement to be unchecked on a T-mobile MDA Wiz200 Windows Mobile 5.0? Any suggestions are appreciated!
ROM version: 2.16.10.2 WWE
Radio version: 02.15.11
Protocol Version: 4.1.13.12
ExtRom version: 2.26.10.105
Windows Mobile 5.0 OS 5.1.185 (Build 14955.2.3.0)
Hi, just wanted to note that I'm having a similar/the same issue. Router is a Linksys WRT54G running standard firmware, no Open WRT. I've been able to connect my MDA to every other access point I've tried without problems, but I cannot get it to connect to my own G router with WPA-PSK. Same behavior as above post. Any help would be greatly appreciated!
i haven't seen wpa in any rom except for orwells1984. even the pdaviet roms dont have it.
WPA/WPA-PSK authentication and TKIP encryption are included in ALL ROMs for the Wizard, no execeptions. Faria managed to add WPA2 & WPA2-PSK authentication as well AES encryption in his AKU 3.3 ROMS which I can verify works perfectly (WPA2 & WPA2-PSK both with AES encryption). The reason 802.1x is greyed out with WPA-PSK & WPA2-PSK is it isn't relevent with this authentication type. WPA & WPA2 (Enterprise) requires a back-end RADIUS Server that performs the authentication using 802.1x.
With WPA-PSK & WPA2-PSK you are relying on knowing the Pre-Shared-Key (PSK), my guess is you have entered it incorrectly. Re-check the key you entered.
HTH
Andy
Thanks ADB100. Yes, I'm the network engineer that set up the WPA-PSK network I'm trying to access using a Wizard. What you describe is exactly the way it is supposed to work with an initial Pre-Shared Key (but without any Radius Server, smart card or certificate). All my HP and Toshiba laptop users can access that network without problems using their laptops running Windows XP Pro when in Wirelesss Network Connection Properties the "Authentication" tab for a WPA-PSK wireless network has the check box for "Enable IEEE 802.1x authentication unchecked.
Here's what causes my confusion with the Wizard (although this may just be a badly designed GUI in Windows Mobile 5.0). When WPA-PSK with TKIP data encryption is enabled in the Wizard (T-mobile ROM 2.16.10.2.WWE) and I click on the 802.1x tab, a page displays showing a box checked by default which cannot be unchecked to "Use IEEE 802.1x network access control" and with "EAP type: Smart Card or Certificate" also displayed but grayed-out in a drop-down box.
I work for a software development company and we would use that display configuration to show settings enabled by default that cannot be changed. To indicate that settings are not in effect we would either (a) not display any settings at all, or (b) have the tab open but have all the text grayed-out with the "Use IEEE 802.1x network access control" box unchecked, and with a blank field displayed in the "EAP type" drop-down box.
I appreciate your suggestion about making sure the encryption key is correct because its always useful to start with the basics. I'll also try re-entering the key using both the keyboard and the touch screen on the Wizard just to make sure there are no problems with the type of date entry I'm using. However, the encryption key that I've been entering on all the laptops that I've set-up for users of the wireless network has worked fine.
Do you have any other ideas or suggestions?
Hey folks,
I agree with jonmcad that leaving the box checked when grayed out gives the user the impression that this option is selected and cannot be disabled. But I understand that's not what's really going on. As for my wifi problems, after reading several other threads here, I got things working by changing the channel my router was using from 6 to 1. Works fine now. I don't know if changing the channel would be an option in a corporate environment, that's just what worked for me.
I have the same observation as you on a different device.
My PDA is AIRIS T620.
When WPA-PSK is enabled then the checkbox for 802.1x network access control cannot be unchecked (it is grey on the sheet).
I tried to disable 802.1x by different way. I have downloaded Total Commander for PDA (or for Win CE? I don't remember exactly). With the help of that utility the registry can be searched and edited. I have found \\\registry\HKCU\Comm\EAPOL\Config\Network_name\Enable8021x key with 1 as value. I changed the value to 0. After I started network connection the value was changed back to 1. There is another key too: \\\registry\HKCU\Comm\EAPOL\Config\Network_name\EapTypeId. I tried to delete this key while Enable8021x was set to 0. The result was the same: the WPA-PSK connection was unsuccessful and the original keys and values were restored.
I have no other observations ...
László
I had the same problem today while trying to connect to my wpa-psk tkip wifi. Then i remembered i had messed around with Advanced Config, setting wpa authentication to enabled. So i reseted it back to disabled and after soft reset i was once again able to connect to my wpa-psk tkip network.
I met the same issue.
1. I use WPA2/PSK - AES or TKIP
2. "Use IEEE 802.1x network access control" is checked, and grayed. I can't uncheck it.
3. My phone can connect to the router, but IE won't show a webpage.
4. While my laptop works fine.
Hi guys, does anybody found a solution for this?
Can anyone find the solution for this as i Have HTC Touch Diamond.
Hello to everybody
i own a Trinity (i love it!) upgraded to wm6 (shadowmite rom) and radio 1.46.00.11.
i am desperately trying to connect via wifi to my home network to use my flat adsl, but i have no success.
Besides i also have a Blue Angel with WM2003 (i still love it..) and i dont have any problems at all with it to access my network/internet thru wifi!
I am using a wifi router/modem (zyxel prestige 660 hw) with Adsl2+ and italian provider liberomini 4mb
my PC is winXP MCE sp2 and its connected to the router with ethernet cable
I have set up both PDA's exactly the same way:
-wifi card :connects to 'my work'
-IP address: assigned by server
-authenticationpen
-data encryption : disabled
-connections/advanced/networks: both set to 'wy work'
-proxy settings: internet connection enabled / proxy server disabled
on the router i disabled all protections/firewall/encryption/passowrd/etc.
dhcp is enabled both on the router and the PC
both PDA's connect to the Zyxel router and show very with good signal strenght.
the router recognizes the signal of both pda's and displays correct mac-address and ip address of both
BUT,
THE BLUE ANGEL CAN BROWSE THE WEB USING TE WIFI/ADSL CONNECTION AND CAN ACCESS MY PC DIRECTORIES/RESOURCES, WHILST THE TRINITY DOES NOT!
it cannot locate webpages and does not connect to network.
i tried all possible combinations of wlan/wifi/connection settings, but no way!
Am i doing something wrong? is there any special setting to be done with wm6?
i dont believe the fault is in shadowmite's rom as even before flashing to this fantastic rom i had tried once with wm5 and had same problem (though i did not dig too much in it)
Can anybody help me?
Check if you are using a proxy in your gsm settings. If it is so, use someting like Advanced Settings or Trinityhacks or something ele to disable the proxy during wi-fi connections.
Ciao
wm6+wm2003+ router wifi
thks yr reply claros.
i checked my gsm settings (you mean my ISP connection settings?) and there is not mention of proxy server in there
i only found proxy server option in MY Work connection settings and it is disabled.
all settings are exactly same as on the blue angel which is working fine...
do you know if this is a common problem with wm6?
any suggestion how to proceed?
found solution!!!!!
eureka
i found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=315982
its very easy! just go to wlan power tab and move the horizontal slide fully to the left (best performance)
magically my triniry now is connecting to internet via wifi!
great!
ps: still cannot access myh pc directories but i guess i will solve by installing Resco explorer
thanks
Hi all
Ive just brough a new belkin wireless n router set it up as you should connected my laptop my brothers laptop my desktop my ipod touch but my MDA touch will not connect to it. My touch connects to my other trendnet router fine and all other AP i have tryed. what is really bugging me is that when i try and connect to my new belkin it wont let me connect to any other routers so i have to delete the belkin router from my device and soft reset
i am starting to think it could be a faulty router or mda
Same boat....
I have the same issue with my HTC Kaiser, can see a host of AP/Wireless Routers via the Wi-Fi card but fails to connect to my Belkin F5D8631-4 v3 N1 Wireless Modem Router, a real pain in the arse considering the price I paid for the router, everything else connects, PC's, PS3, 360, DS Lite, PSP the lot....all bar the Kaiser.
Anyone managed to find a solution to this issue and sitting on it
Before you ask, no security enabled, only using the MAC address filtering to do the job of keeping unwanted off my network, even with this turned off the Kaiser see the network, flags it up as available but will not connect....
Any help gratefully received
Connecting
I bought a sitecom mimo XR router, I have got the same problem with a Qtek 9090.
The solution I found is, dont activate dhcp on your device but manually add the ip adresses of your router and device, set the dns server ip-adress to the ip-adress of your device.
Worked for me.
royaldutch51 said:
I bought a sitecom mimo XR router, I have got the same problem with a Qtek 9090.
The solution I found is, dont activate dhcp on your device but manually add the ip adresses of your router and device, set the dns server ip-adress to the ip-adress of your device.
Worked for me.
Click to expand...
Click to collapse
Thanks for the feedback/comments
I have done (I think) correctly and its still not playing ball, just to confirm the actual detail:
Router Set Up:
DHCP Activated ? (it is currently)
All WEP/WPA turned off
MAC address filtering turned on and the MAC adress for the hand set network card (found by
on to Com Manager, Settings, Wireless Lan, Advanced Tab) is on the list on accepted MAC address on the MAC filter
Handset Settings
Wireless Network Adapter settings (on Configure Network Adapters page)
IEEE 802.11b/g Compatible Wi-Fi
User Specific IP address 192.168.2.50 (not an address allocated by DHCP)
Subnet Mask 255.255.255.0
Default Gateway 192.168.2.1 (IP address of the Router)
Primary DNS 192.168.2.1 (IP address of the Router)
I get the same sort of problem occasionaly with my universal. The only thing that sorts it out is deleting any reference to the connection then removing the battery. This seems to flush out the system & then it finds it a new connection & connects straight away, worth a try if nothing else works.
JohnWB said:
I get the same sort of problem occasionaly with my universal. The only thing that sorts it out is deleting any reference to the connection then removing the battery. This seems to flush out the system & then it finds it a new connection & connects straight away, worth a try if nothing else works.
Click to expand...
Click to collapse
Thanks John,
I did try this, and it didn't make a difference.
You know when you get that feeling you are going to have to admit defeat....
Any solutions so far
Guys,
Does anyone has a solution so far?
What version of Windows mobile are you running?
This post in the Shift forum
http://forum.xda-developers.com/showthread.php?t=384730
mentions a beta firmware on Belkins UK site which solves the problem.
hi, i'm using a mda vario 3 with an older Belkin router and it works fine. I have the dhcp server turned off with all the ip's set manually. the ieee 802.1 auth thingy is not selected. other than that my settings are similar to those posted above. Although i have wep security set up. (Nintendo ds's only do wep)
Corrykid said:
What version of Windows mobile are you running?
Click to expand...
Click to collapse
I run Windows Mobile 6.1
When I ran Windows Mobile 6.0, I did not have contact with my Sitecom WL-173 router either.
tembares said:
Guys,
Does anyone has a solution so far?
Click to expand...
Click to collapse
I have found the solution.
Just upgrade the radio to 1.64.08.21.
Then it works.
wifi problem
just upgraded my MDA to wm6.1 and i encountered a problem regarding with my wifi connection.
having my old wm5, i dont have any problem connecting to my wireless router(d link) but when i upgraded my wizard to wm6.1, at first it will connect for about 20sec then the connection will drop and i cant connect anymore. but my wizard detects my router but it just on the screen that it is unavailable even though it shows a very strong signal.
i've tried to hard reset it and it doesn't work. i just wondering if there's a configuration i should do with the setting of my wifi? or is there an application that i can download here? and also i lost the voice tag program of my phone when i upgraded it to wm6.1, where cant i download an application for it?
thank you in advance!!! ([email protected])
Customer Call Details Nov 13 2008 04:37
I have an HTC Touch that can connect to other hotspots, but not to my home Belkin router. Sometimes, if there is another connection available, it can see the router, and says that it is Available, but cannot connect; other times it won't even see it. I have checked for firmware updates, but I have the latest. Any help would be greatly appreciated.
Belkin Response Nov 14 2008 22:18
Hi Lilburd,
Thank you for contacting Belkin Technical Support.
We understand that the HTC Touch does not connect to the router. We apologize for the inconvenience caused.
Please follow the steps given below to update the firmware and configure the router:
We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.
Please download the latest firmware on the router from the link given below. Download the file "3.01.29":
http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=10288&scid=0
and save it to the computer.
- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.
Please follow the steps given below for configuring the router:
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables.
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.
If the connection type is Dynamic (cable):
- Choose "Dynamic" and then click on "Next".
- Type in your “Host Name”, if your Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes".
If the connection type is PPPOE (DSL):
- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen.
Internet Status should show "Connected" on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information:
1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”.
4. If the internet connection is stable on the computers using the router?
5. If the HTC Touch detects and connects to other networks in the neighborhood?
Lilburd, if you need further assistance please feel free to write back to us and we will be happy to assist you.
Regards,
Belkin Technical Support.
This was the response I got from Belkin after emailing them. It worked like a charm
Registry option
Not Sure about this one, but if you use SK Tools, or find the registry values yourself, there is an option to activate on the Touch, the 801 g networks compatibility, for some reason they are compatible but the option comes 'off' by default.
Paul
THANK YOU - Wizard 9100 now connecting to belkin N1
thank you - I had the same problem as original post - I updated using the pre release belkin firmware and it works now.
Excellent!
I was pretty sure that it was an incompatibility issue between HTC and Belkin.
Thanks a lot for this patch, you saved my (wifi) life ^^
This update also worked with my Kaiser! I was pulling my hair out trying to get it to connect. Thanks a lot!