I upgraded my XDA I with the original Tmobile upgrade PPC2003 GER. All works fine. Then i started the Autokonfiguration for Tmobile Germany. One Programm i got was a tool for mms-sending and receiving. When i want to start this Programm an error message occures like "This software is only working on original T-mobile device". What can i do ? Where is the difference between my XDA I and the MDA I ?
My Device-Information shows:
ROM-Version 4.01.19 GER
ROM Datum 03/05/04
Radio Version 3.23.11
Protokoll Version 32S54
Identity : PWA10A2, Pocket PC
thanks for your help !
the difference is only the software
try doing a search for mms composer in the forum it should not have any special relation to any operator of cause you may have to put in the mms settings manualy
thanks for your answer,
using mms-composer is one possibilty. But i thought, when flashing my XDA I with the original ROM of the MDA (T-Mobile, PPC 2003, German), there would be no difference to the original MDA I, and then using the MMS-client-Software (Materna, ANY WAY) from T-Mobile Germany shouldn't make any Problems. When starting the MMS-Software the message "... Software only for T-Mobile Devices" occurs. This means, there must be another difference to the MDA. Any idea ???
Hi,
i have found the solution for my own. Here for all who are interrested:
- the difference between a MDA1 and XDA1 (with MDA-ROM) is the imei-number
- the MMS-Client-software from T-Mobile (Materna, ANY WAY) needs an imei of a T-mobile MDA
- it must begin with 350512... or 350513... following with a serialnumber of T-mobile
that's all :wink:
Hi all!
I have just done interesting experiment.
1) using WinRAR I extract file nk.nbf from RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.exe
2) using TyphoonNbfTool.exe I extract OS.n_d (57mb) from nk.nbf
3) using nbfdec.exe I encrypt OS.n_d to nk.nbf
4) using MaUpgradeUt_noID.exe I flash nk.nbf from step 3 to my Magician (QTEK S110)
5) MaUpgradeUt_noID.exe say - OK, BUT...
6) After soft-rests (and hard-resets), my Magician always returns to bootloader mode - Windows from Charmer do not start.
7) After all I flash 1.13 Magician ROM - all OK
Hi,
The devices might look the same but the hardware is completly different - the charmer has more in common with the wizard then the magician. There is no point whatsoever testing the charmer rom on the magician.
Paul
psneddon said:
Hi,
The devices might look the same but the hardware is completly different - the charmer has more in common with the wizard then the magician. There is no point whatsoever testing the charmer rom on the magician.
Paul
Click to expand...
Click to collapse
Only proceesor and ROM type/size different, not completly different.
OMAP and XScale Processor - both ARM architecture.
Modified Wizard Rom works on BlueAngel !!!
Unlikely to work unless Magician itself was a WM5.0 machine.
There's a Gigabyte WM 5.0 Mobile fone just released with a same CPU,same RAM and ROM as Magician.I think this is our last hope...
Hello I have trying to mod the Chamer rom whit hexeditor but no result.
The bigest problem is the Cpu ;/ I cant find the question how to mod the keys in rom ;/ if i'll find that so no problem.Only copy the bytes from Magician rom to Chamer rom and flash.The rom not a big problem.Teory says that when we start the windows vill be anavilible 64mb storage/program.
Jassee said:
Hello I have trying to mod the Chamer rom whit hexeditor but no result.
The bigest problem is the Cpu ;/ I cant find the question how to mod the keys in rom ;/ if i'll find that so no problem.Only copy the bytes from Magician rom to Chamer rom and flash.The rom not a big problem.Teory says that when we start the windows vill be anavilible 64mb storage/program.
Click to expand...
Click to collapse
You can use "WM5 Edit ROM" (see http://wiki.xda-developers.com/index.php?pagename=WM5EditROM)
and dumps all files from Charmer ROM (from OS.n_d file) , then cook new ROM.
may be we must change Magician bootloader to Charmer bootloader first?
may be mamaich can explain this?
change bootloader not needet to do. A have flash the magican whit Bigstorage solution ( the new rom is Wm05) But he dont whant to start.So a think that is cpu problem :/
you guys have to understand, that wm5 rom structure is totally different than wm2003.
For Himalaya, there was so called IPL and ROM image as two separate files, which you then put together.
you are missing IPL for magician, I guess.
If there is a single WM5 ROM build for Magician, even one, which doesn't work properly, then you can start thinking about "wm5 ROM edit" and using files from other devices.
don't even touch the bootloader. it has nothing to do with it. you will only PERMANENTLY break your beloved Magician...
buzz
buzz_lightyear said:
you guys have to understand, that wm5 rom structure is totally different than wm2003.
For Himalaya, there was so called IPL and ROM image as two separate files, which you then put together.
you are missing IPL for magician, I guess.
If there is a single WM5 ROM build for Magician, even one, which doesn't work properly, then you can start thinking about "wm5 ROM edit" and using files from other devices.
don't even touch the bootloader. it has nothing to do with it. you will only PERMANENTLY break your beloved Magician...
buzz
Click to expand...
Click to collapse
HI buzz!
Thanks for the explanation!
Can we try to reuse the IPL from Charmer on Magician?
[quote="truedim]HI buzz!
Thanks for the explanation!
Can we try to reuse the IPL from Charmer on Magician?[/quote]
hard to say, but most probably NOT.
But you can always try...
buzz
Also is part of the reason why WM5 cant be released for the Magician not something to do with the DiskOnChip system? I read in the wiki that the Magian using an intel 64MB flash chip instead.
I for one would love to have WM5 for my jam, but I just cant see it happening Thats why I went out and got a charmer
truedim said:
Hi all!
I have just done interesting experiment.
1) using WinRAR I extract file nk.nbf from RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.exe
2) using TyphoonNbfTool.exe I extract OS.n_d (57mb) from nk.nbf
3) using nbfdec.exe I encrypt OS.n_d to nk.nbf
4) using MaUpgradeUt_noID.exe I flash nk.nbf from step 3 to my Magician (QTEK S110)
5) MaUpgradeUt_noID.exe say - OK, BUT...
6) After soft-rests (and hard-resets), my Magician always returns to bootloader mode - Windows from Charmer do not start.
7) After all I flash 1.13 Magician ROM - all OK
Click to expand...
Click to collapse
You guys are doing a wrong research
Qtek S110 != MDA Compact 2 == HTC Charmer
Qtek S100 == MDA Compact == HTC Magician
You just said you used a Charmer rom on a S110.
Nice action dude!
Charmer
You wrong TryOG
Qtek S200 = MDA Compact 2 = HTC Charmer
Qtek S100(ram=64) = Qtek S110(ram=128) = MDA Compact = HTC Magician !!!
Re: Charmer
lcm86 said:
You wrong TryOG
Qtek S200 = MDA Compact 2 = HTC Charmer
Qtek S100(ram=64) = Qtek S110(ram=128) = MDA Compact = HTC Magician !!!
Click to expand...
Click to collapse
wrong 2
qtek s110 is diferent then s100 (HTC Magician)
qtek s110 have diferent display and some hardware ...... not ram only
Re: Charmer
lcm86 said:
You wrong TryOG
Qtek S200 = MDA Compact 2 = HTC Charmer
Qtek S100(ram=64) = Qtek S110(ram=128) = MDA Compact = HTC Magician !!!
Click to expand...
Click to collapse
Qtek S200 = HTC Prophet
MDA Compact 2 = HTC Charmer
dave106 said:
Qtek S200 = HTC Prophet
MDA Compact 2 = HTC Charmer
Click to expand...
Click to collapse
E = mc² ???
return to magician
i have magician device with charmer rom how i can come back to the magician rom ?? help please
Hi
I could not find any posts with benchmarking results for the 838 Pro with the different ROM versions, so I spent a whole day flashing my Dopod. No bricking so far thanks to the help from the Wiki.
I tried to keep all the test environment for each ROM as similar as possible.
In each case I installed the full ROM and only "SK Tools 3.0.61.0" to do the benchmark.
ROM's tested:
WM5 - From Dopod site - 838Pro Rom Code(12/1/2006)
WM5 - From Dopod site - 838Pro latest ROM code for Hutchison 3 network
WM6 - From XDA - WM6 Vanilla
WM6 - From XDA - WM6 Black 2.0
WM6 - From XDA - WM6 Pro Vanilla - Dutty
WM6 - From XDA - WM6 Pro Medium - Dutty
WM6 - From XDA - WM6 Pro Full - Dutty
I ran all of the tests that "SK Tools - Benchmark" has.
Please see attached spreadsheet or CSV file for more details.
If anyone has a better application for benchmarking or a better idea on how to run it, please let me know.
does someone has english rom for herm 200? it's the same as HTC P3600?
The Wiki is your best friend:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Versions
thank you...you're right
HTC P3600 = Trinity.
HTC P4500 = TyTN = Hermes.
Hi..anyone can help me to find a rom for my htc?
my htc is herm200 vodafone uk please help me all roms i used don't update less 1 %
JMFF2011 said:
Hi..anyone can help me to find a rom for my htc?
my htc is herm200 vodafone uk please help me all roms i used don't update less 1 %
Click to expand...
Click to collapse
here, official ROM Hermes vodafone UK
hello
The message “NO GSM” started suddenly appearing on start-up and of course the phone is not functional afterwards.
[[Category:HTC_Hermes]]
Upgrade problem
I was downloaded firmware from UK site, but still have the same problem. Instalation of new firmware starts well, and read my version from htc and when i clic next on next step, my htc goes in bootup mode, conection between pc and htc was broke, and on my phone only i can see herm200 IPL-1.00, next row herm200 SPL-1.04 and botom of the screen USB.... nothing happening...
Any one can help me?
Thanks
P.S.
Everything i wanna is to change german windows to english
Can somebody paste here a link to original htc x7500 wm5 rom: "RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe"
The xda ftp seems to be down and I can't find it anywhere else.
Thx
WM6
http://htc-devs.com/uploads/Athena/R...00.00_Ship.exe
High Speed UK Mirror (yes it's official)