Hi
I have just got a new MDA Vario. I have successfully unlocked it as you told me I have intsalled some new programs but after it crashed I had to soft reset it and it boots ok but I cannot access any of the programs it had, not even the contacts It comes with a start menu with only today and and a file named colint. I have tried for several time a hard reset but it stays the same . I am very worried as It was a mobile I always wanted but now it does not want to work please help me I am stucked.
Thks[/b]
Hi, which rom are you using - and how did you unlock it? and what option did you choose? there are 3 different versions of the tool on the forum. (so want to make sure you used the right one) You could use this opportunity to upgrade to an aku2 rom.
p.s. please dont post twice someone else may spend time anwsering the other post - could you delete it - just press x on the top r hand corner of post - cheers
Problem solved
I have installed a new rom I have found around here and everything is back to normal
thks
Related
Hi Everyone,
I am new to the MDA compact 3 and have a few questions im hoping someone can clear up for me. I used to have a Motorola V3 and could hack that to hell and back but this seems a lot more complicated.
I have a T-mobile UK MDA Compact 3 and im going to use www.imei-check.co.uk to unlock the sim lock and CID. Unless someone knows of software which allows me to do it myself.
When it is unlocked i want to put an O2 sim card in it but then it will be full of T-mobile crap i dont want. Is it as easy as just wipe it and install a fresh copy of windows mobile 5 on it to erase all T-mobile branding and have a HTC factory stock one similar to a home PC re-install.
Has anyone written a tutorial on how to wipe and re-install, I tried searched but couldnt find anything.
Thanks for any help you can give.
If you do not want the Tmobile crap, just hardreset the phone. During installation, soft reset the phone just after the security section (when it ask if you want to set a password). That will get rid most of the Tmobile crap and your phone will be crap free. Although you may still have the 1st Tmobile splash screen crap. As for the O2 crap that you may need, either do a search for the CAB or you can always input it manually (not that difficult) once you got all the necessary info.
Thanks for the reply.
Sorry for this question but how do I do a hard reset?
So if I do a soft reset, which im guessing is just turn it off and back on using the power button, after the security section it will not put any of the T-mobile crap on it. Does that mean that if it needs to go back and I need to restore it to how I got it, I can do another hard reset and just allow it to run right through without doing the soft reset after the security section.
Start -> Settings -> System -> Clear Storage = hardreset
yes
yes
Hi, i installed a new rom for my mda pro from the t-mobile site, but when it had finished i pressed the reset before the count down ran out on the installin tmobile crap. but then when it restarted i couldnt use the web or mms (i tried 2 enter the settings manually) but theis didnt work is there any way around this problem?? any help would be great thanks
As mentioned here: http://forum.xda-developers.com/showthread.php?t=296102 I'm having some issues with my Wizard variant. In short:-
- It won't vibrate (I've tried all the software options)
- It won't sync (with either Activesync for PC or Missing Sync for Mac)
- The internal memory seems to have become locked, so I am unable to install new programs or delete unwanted ones.
It's a UK T-Mobile MDA Vario flashed with the I-Mate 2.16.9.1 WWE ROM about a year ago.
I'm starting to think that a full factory reset is my only option to get the thing working properly again.
Can someone please talk me through it or talk me out of it?
Thanks.
From the manufacturer's site --
How do I reset the device to factory settings?
Select Start > Settings > System > Clear Storage. Type 1234 in the box and tap YES. This will erase all information on the device and restore it to factory settings
Well, that's the reset done. It seems to be stuck on "Running Install_Tsk.exe...". If it goes horribly wrong, Argos have got a cheapo phone on sale at £20 that'll tide me over until my contract expires next month...
You might try re-flashing the ROM you had on there or even upgrading to the T-Mobile 2.26 ROM and see if that solves your problem.
If I'm right, it should still be CID and sim unlocked from when I first flashed it with the K-Jam ROM. In fact, every time it has rebooted since the reset, it comes up with the HTC and I-Mate splash screens instead of the T-Mobile one I was expecting, which can only be good news.
I'm thinking of flashing it with a WM6 ROM. Any good ones come recommended?
I don't think anything will re-CID lock it unless you chose to do it yourself so you should still be good there. Which ROM to choose though is kind of based on personal preference. There's plenty to choose from in the WM6 section. The best thing to do is to read through the different ones, pick one you like and then flash it. If it turns out you don't like it that much, try a different one or use one of the kitchens and cook one for yourself.
By the way, before you flash any WM6 version, you should still flash t-mobiles 2.26 so you have a good IPL/SPL to work with and a clean base for it since you're having problems with your old version.
Thank you very much for your tips. Tomorrow is Sunday and I have no plans; looks like it's ROM flashing day!
Good luck. Make sure you read through everything before you flash anything, but since you're already CID unlocked it should be easy.
help
xeno1 said:
Good luck. Make sure you read through everything before you flash anything, but since you're already CID unlocked it should be easy.
Click to expand...
Click to collapse
I have installed a ROM but after the hard reset my phone stays in the boot screen frozen; this means is briked? I can't install the original rom cause it won't recognize the usb. any clues help please!!
thanks#
Gonzalo
Hello everyone,
I am new to Windows Mobiles. I have bought a used T-Mobile MDA (HTC Wizard), The problem with this is all the keys except Power Button, Align Screen & Camera button hangs after a minute or two the mobile is turned-on. Nothing works. I have to use soft keys to make a call. If I press Camera button the camera interface appears, when I close it, all keys started to work normally but again after one or two minutes it hangs and I would have to again use the same technique to make them work. Sometimes all the keys work normally for more than a minute but again hangs. I have searched in all the system settings & I can't find any option to configure it. I have searched many threads on this site to solve this problem but can't find the appropriate answer. It seems to me someone have burned wrong ROM or did something wrong with its ROM for which it is acting like this. Given are the specs of ROM.
IPL/SPL = 2.26. G3
T-Mobile ROM.
I am using SIM of my operator other than T-Mobile. (SIM Unlocked)
Also If I try to Hard-Reset the phone, When It say me to "Press Send to restore factory default settings or anyother key to quite", All keys hangs and I have to make a soft reset to get into working.
Can anyone tell me what the problem and how can i solve it ?
How do I know whether its CID Unlocked or not ?
Does Upgrading/Reinstalling the ROM will solve the problem ?
Is it hardware problem ?
Thanks in advance.
One more thing
I also have did a hard-reset by following the given procedure.
Start->Settings->System->Clear Storage.
It installed the OS after boot and my installed softwares disappeared. Which means it really hard-reseted itself, But still the problem isn't solved.
I am pretty much sure now its ROM/Hardware problem !!
Any idea about the solution ?
Have you tried to flash a new ROM yet? That may solve the problem, it made my power button work again.
mobby_reload said:
Also If I try to Hard-Reset the phone, When It say me to "Press Send to restore factory default settings or anyother key to quite", All keys hangs and I have to make a soft reset to get into working.
Click to expand...
Click to collapse
I'm not sure, but that sounds to be seems like hardware problems. I'm not sure if that screen actually has anything to do with the ROM at all, which at best, it is IPL related? I would suggest you to try an offical T-Mobile ROM, which includes everything (i.e. IPL, SPL, and ROM) and see if this problem persists.
Can't find the official T-Mobile ROM.
Thanks for your replies. Can you please tell me from where I can find the Official T-Mobile ROM, I have searched on this site & xda-developers ftp site a lot, Some links are broken and somewhere FTP requires authentication. Also can't find it on Google. I think ruu_prodigy_1081002_104_10910_tmo_usa_ship is the original ROM file but can't find it anywhere except the T-mobile site which require a valid T-mobile no. Can you post some valid like here to download the file.
Thanks again.
If you were to go Wiki, at the ROM table page, bottom line, you would to find this
http://www.tm-phonedownloads.com/
which should be a global site (if not US site), and if you go into it, 'MDA Vario', there is a ROM EXE to update to AKU. I saw it as UK which probably because I have an UK ip, you try going in and see if you have US version instead.
Also, for the TMobile US, you can consider getting a PAYG card just to get a valid tmobile number to get into the page to download stuff, IF you are sure there are something there (e.g. and if PAYG is cheap)
Ok, I got the UK version. I'll give it a try.
hanmin said:
I'm not sure, but that sounds to be seems like hardware problems. I'm not sure if that screen actually has anything to do with the ROM at all, which at best, it is IPL related? I would suggest you to try an offical T-Mobile ROM, which includes everything (i.e. IPL, SPL, and ROM) and see if this problem persists.
Click to expand...
Click to collapse
Well, I have tried Official ROM. But the problem is still there. I am also now pretty much sure that its a hardware problem. I guess the mobile needs to go to scrap now.
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
some help would be appriciated
jasonchiu said:
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
Click to expand...
Click to collapse
These are both known glitches in the BA with WM6
For the no signal a soft-reset should fix it, for some reason if you remove the battery and then replace, the first boot has no radio initialization, but a soft-reset after that fixes it.
As for the passcode, you have to clean your hive file to regain access to the device. You do not need to format storage, but all your registry settings for installed software will be gone. Most likely a re-install of each app will be needed.
i just went through this..i tried changing my sim card and i was freaked when i saw no radio rom installed..then i upgraded to radio 1.15 and first it worked but again i t showed the same so i went into bootloader an then soft-reset and its working till then ( about 5 softresets till now)
cheers guys, will try that out.