Related
Is any useful way to remap the Green and Red Phone button and the volume slider button? I mean for launch application or any function. Thanx.
There are some such programs for volume slider.
The most simple I prefer is attached here.
Just put it to the \Windows\Startup folder. It just "unbind" slider but not remaps it to another buttons. This will allow to use slider as F6/F7 buttons in programs able to hook them e.g. Haali Reader...
Thanx
It seems to be ok but where did you attach it? On my MDA is no offered file to download at this time. ThankU.
I've got it
Ok. Now is the sheet with uploaded file appeared. I've got it and extracted it. After i run the *.exe file it does nothing. Why?
because it should do nothing
This utility just frees slider buttons from default binding to volume control.
If you have an application that understands F6/F7 hardware key pressings (slider up/slider down) you may bind these key in the program.
As for me - I use them to scroll text up and down in Haali Reader text reader program.
But (as I said above) there are another programs to use slider up/down control. Unfortunately I don't remeber where I saw these utilities - but they really exists
And, as far as I'm back to the Andes from (Blue Angel) - I think I will write another one specially for Himalaya/Andes.
Ok, let's wait some days. If there are any results - I'll post the report here
P.S.: BlueAngel is the best HW keys equipped device i've ever saw But...
Thanx once again
Thank you 4 ur help. Now i understand that. And what about the Phone buttons? Any ideas? Ex.I want to use red button as Ok/Close simulation. Any ideas how to do that? Thanks.
Nobody unmaps phone buttons. It is possible but unresonable because of HTC is a phone device also. But I'll implement this feature too.
OK
I will wait for it.
The very first (and buggy) try of HW remapping utility is done. The application setup is available HERE
After installing .CAB file go to Start -> Settings -> Buttons and see the changes...
DO NOT INSTALL THIS APPLICATION ON BLUE ANGEL!!!
It will hide four lower hardware buttons until hard reset!
1. This app was tested on Andes with WM2003se, but should work on Himalaya/Magican with WM2003 and above
2. You will lose the possibility to use hardware key mapping in other applications forl remapped buttons. I need to re-grab buttons from time to time because the system tries to thieve them from me
3. Currently I don't now how to emulate green and reed buttons functionality after unbinding them from the system.
4. I can count any number of button pressings (3,4,5...), but -
5. WinCE reserve codes for only 15 hardware buttons (40C1..40CF)
There are some ideas for future improvement. But it would be nice to know your thoughts.
Just to "stimulate": I can create settings screen during setup to allow flexible configuration where you will
- choose which buttons to handle and how many key pressings to detect;
- choose option to unbind and/or re-map volume and phone buttons
- ???
And let me take a time-brake for 2 days before next programming session
The utility is ready. It allows you to:
remap each standard hardware button to 2 or 3 "virtual", simulated via double or triple clicks;
use volume slider to simulate Up/Down direction keys or create additional "virtual" hardware buttons;
remap Red and Green phone buttons to 1,2 or 3 hardware buttons each.
In a result you may create up to 15 hardware buttons (system limit)
Just install program and check Start -> Settings -> Buttons.
Here is Oficial AEBPlus home page, full desktop-based setup (~27K) and Direct link to CAB file (~30K)
Well done!
Excellent software! Thank you once again for your work. Works very very well!
man this is great really like it
works perfect :lol:
Seems to work great. Haven't had it running long enough to see if the camera button will get stolen back (big problem for me on XDA IIi), but being able to map the volume is great.
In the next version any chance of adding an <enter> option like Vito Button Mapper which I think just sends a <carriage return> to select whatever is highlighted.
Is "<Ok/Close>" option in button settings applet not the same?
NO, <OK/Close> generally tends to close the current window rather than selecting whatever is highlighted.
Also whatever application keeps on stealing back the camera button is still doing it. I don't know if it is part of the UK O2 customisations or the core PocketPC Rom, but eventually whatever function is mapped to the Camera button gets re-mapped back to the camera. This also happened to me with the standard button mapper and Vito button manager. It's a little annoying since the camera button is the most usefully positioned, and it is also easily knocked, starting the camera at awkward times.
Ok, I'll add this option for camera button (a bit later, in a case other suggestions arrives).
As for the re-hooking button by camera application: AEBPlus initializes all of the buttons from time to time. Currently this take place every 30 seconds. So if you will wait a bit - all buttons should be re-grabbed again
This does not seem to help because whatever application that is resetting the camera does it in the same place as you are storing the button mappings. When I go into the Buttons Setup it will now say that the Camera button is mapped to the Camera.
Yes,I see... It looks like Camera application is a pushy application . The solution is to remap "normal" Camera HW button to 3 press instead of one, but I don't like this.
Anyway - utility was released.
New features: added option to emulate Enter key with Camera button.
Hi AE, your utility is great. It is very useful but SIMPLE and SMALL.
I used it instead of other button mapper software.
There're some issues need tobe improved:
1) Mapping "Green" and "Red" button:
Enable mapping when they're iddle only (phone function does not work).
E.g: I'd like using Red button to close running app. But in phone function, Red button is still used to hang-up the phone as original its function. Anytime I have a phone call, I can use Red button to cancel a outgoing/incoming call.
You can refer the program of mamaich in this web site.
2) Single press is too low:
I press a key one time and wait 5 secs or more until it works. It's too slow. Can you improve? Double-press is OK.
3) Press n hold:
Can you add "single press n hold" for all hardware-keys? I think "single press n hold (after 3-3.5 secs)" is more convenient than "double press" or "tribble press". Do you think so?
Hi AE, very usefull application! Is there any way that we can have an options screen, where we can change the key options we get after installing the app? That would be easier to edit our preferences if we want to make changes to our initial choices. Furthermore I added a Mortbutton to one of your simulated hard keys. Each Mortbutton can show a list of 12 apps for a buttonpress. That means That I can now bind more than 60 apps to the buttons in total! Very good for one-handed use of my Magician, thanks!
Any ideas on how to get the light button working on a jas-jar. Mine has not been working since the start and I've tried everything. The button Im talking about is the first from the right close to the infrared port on the outside of the device. It is supposed to turn on the flashlight but when I press it nothing happens and it doesnt even show up in the buttons applet in WM5.
Actually that button doesn't turn on the flashlight, though some here have tried to come up with a hack so that it would. I don't know if they were ever successful with that.
That button turns on the screen backlight when it has timed out but your device is still turned on. It's not the most useful button, which is why folks were trying to come up with a hack to make it more useful, for instance to turn on the flashlight like you wanted to.
Maybe if someone has had success, they will chime in here.
Change the button
Attached is a cab file allowing you to make use out of the light button to anything else :lol:
When yuo say anything else, does that include controlling the flashlight? Either way, thanks for the file.
Would be nice if one could assign it to turn on the keyboard backlight.
There is no option to adjust the sensitivite of the light sensor for the keyboard, and i think that it kicks in way to late.
Find my self holding the finger over the sensor and hitting a button to make it light up.
Any one aware og a possible Reg Hack to make this option appear in the Assing Button list?
Melty said:
When yuo say anything else, does that include controlling the flashlight? Either way, thanks for the file.
Click to expand...
Click to collapse
I meant anything else with use, flushlight & the keyboard light do not have exe files in the buttons map menu :wink:
taiseer999 said:
& the keyboard light do not have exe files in the buttons map menu :wink:
Click to expand...
Click to collapse
Nope i know that :wink: thats why i'm asking if anybody knows of a hack or the whereabouts of such an exe file..... Any ideas??
why dont u just change the option in the settings\buttons\backlight and take the tick off the box, and it works like a charm. everytime u press a key it lights up, sorted, and it doesnt affect the battery at all really
@Elmo
Well i didn't use that choise because i don't have any car charger yet. (Waiting for the Brodit kit)
I want to preserve as much battery as possible.........as you already know, this baby can eat your battery pretty fast............
Re: Change the button
taiseer999 said:
Attached is a cab file allowing you to make use out of the light button to anything else :lol:
Click to expand...
Click to collapse
Is this the same as changing it manually on the registry?
Yes, it's my CAB file I posted a little while back that adds a registry entry so that you see it listed as "Button 5" in the Buttons setting applet.
elmo said:
why dont u just change the option in the settings\buttons\backlight and take the tick off the box, and it works like a charm. everytime u press a key it lights up, sorted, and it doesnt affect the battery at all really
Click to expand...
Click to collapse
God, didn't know it was that easy... cheers!
Anyone any idea how badly this affects battery life?
Re: Change the button
taiseer999 said:
Attached is a cab file allowing you to make use out of the light button to anything else :lol:
Click to expand...
Click to collapse
Isn'it available for the Wizard too ? ...
I wrote a very simple script that turn on the camera and press the flash button.
I use the flash key and ms voice command to start it
you need to have MortScript installed. (include with this package)
A very simple question from a new owner -- where are the buttons defined that are assigned in Settings - Buttons? I don't see them labeled as "Button 1", etc in the User Manual.
davidinnz said:
A very simple question from a new owner -- where are the buttons defined that are assigned in Settings - Buttons? I don't see them labeled as "Button 1", etc in the User Manual.
Click to expand...
Click to collapse
On your HTC Universal, go to:
Start>Settings>Buttons
From there you can change the assignments of the buttons.
Ok. I have found the 2 keyboard keys that are buttons 1 and 2, and the 2 external buttons that are buttons 3 and 4.
I must say that button 1 is not very useful for voice command, when the device is closed. I guess I could assign it to button 4 or button 5 with the registry hack.
On the supplied "headset", there is a microphone with a button on it.
- What does that button do?
- Is it possible to use it for Voice Command?
(I guess for that to happen, it first needs to be recognised as an assignable button in WM5).
The backlight button cab file is working. Now I can reassign that useless button becomes the OK button. Very useful when use it in the tablet mode. But I need two more buttons to use for the softkey. I have use the record button for the left softkey and have no more button for the right softkey. Any suggestion?
One more thing, the script for enabling the flash light does not work. It turns on the camera, but the flash light remains off.
Hi all,
I use the BT A2DP profile to stream music through the media player and one of the 'features' that differs from the K-JAM (wizard) and is lacking in the TyTN is the ability to continue that stream even when the device is 'off' (useful for saving battery, switching off the buttons, etc.). With the TyTN whenever the device is turned off the stream also ceases. Does anybody know if there is someway of ensuring that the media player is not switched off along with the device (I'm guessing a registry setting or similar).
All help very welcome.
Cheers
I was wondering this also. My wizard was able to be "off" and still stream. ANyone got any brigjt ideas?
Later, Lew
Have you tried just turning the screen off? PocketPlus has a utility called "Screen Toggle," which does just that.
When used in conjunction with the Button Lock (leaving only the power button active), you just might be able to solve your issue...
goestoeleven said:
Have you tried just turning the screen off? PocketPlus has a utility called "Screen Toggle," which does just that.
When used in conjunction with the Button Lock (leaving only the power button active), you just might be able to solve your issue...
Click to expand...
Click to collapse
Yeah...what he said!
That what I do.
I really miss this feature to.
So there is no way to do it on the Hermes?
Its not particulary elegent to have to perform multiple steps to turn the screen off. it was much eaiser just to hit the off button and listen away...
I'm using VjDeviceLock wich is what you want, I think.
After you've installed it you should create a new shortcut in c:/windows/startmenu/programs/vijay555/vjdevicelock. You can copy an exiting one in this directory and edit the parameter. What you want is "-displayoff". I bound this to my Videocall-Button, cause I don't use video telephony.
If I listen to music I just have to press my Videocall-Button and VjDeviceLock turns off my screen and locks all Buttons except the power on/off one.
Also VjDeviceLock is just great to save money
If you get a sms or a call the device turns on itself. I once didn't notice this and called a random person out of my adressbook, because I had my trion in my pocket and were moving all the evening and somehow started a call.
This cannot happen again, because I started vjdevicelock with parameter "-install". Now everytime my trion turns on itself it gets automatically (re)locked.
thats a fantastic solution and it works really well!
what program are you using to remap the buttons?
Hi,
Does anyone else suffers strange key problems when using VJdevicelock;
After using -displayoff or -displaytoggle and resume back to normal, phone buttons (call/disconnect,videotalk) doesnt work anymore, it need to be softreseted before the buttos work again?
-Kha
EDIT:
just found out that when resuming from -displayoff, after pressing windows and ok softkeys, dialbuttos work again!
I'd appreciate if somebody here could advice me on how to map VjDeviceLock to VideoCall button on my TyTN (I have original TyTN ROM and the VideoCall key is functional ). I couldn't remap it using Buttons configuration utility in Settings.
as I said you have to create a Shortcut in your Startmenu. Shortcuts in Startmenu are shown as available possibilities in Start - Settings - Buttons (Perhaps it's called a bit different. I'm using a german version where it's called 'Tasten')
This is how I remapped it. I don't use a special program.
I use the device lock on today plugins.
S.K.
silent_killa said:
I use the device lock on today plugins.
S.K.
Click to expand...
Click to collapse
This does not turn off your screen AND your device is sometimes getting unlocked when you receive calls or sms.
Remapping VideCall button
sn00x said:
as I said you have to create a Shortcut in your Startmenu. Shortcuts in Startmenu are shown as available possibilities in Start - Settings - Buttons (Perhaps it's called a bit different. I'm using a german version where it's called 'Tasten')
This is how I remapped it. I don't use a special program.
Click to expand...
Click to collapse
Thank you very much for your instant response. I did all you mentioned in your message and I remapped the VideoCall button (is it the Button between Buttons 4 and 5 ? ) but pressing it still doesn't activate VJDevice. Any other suggestions?
Is the device locked when you click on the shortcut?
If not: edit an existing shortcut, let's say "VJDeviceLock About.lnk". Make it point to: \Programms\vjay555\VJDeviceLock\VJDeviceLock.exe" -displayoff
It is right that there is only one "
When I open my shortcut in a text editor the content is:
Code:
64#"\Programme\vijay555\VJDeviceLock\VJDeviceLock.exe" -displayoff"
Yes. The device locks when I click on the shortcut itself but when I press VideoCall button, to which I had previously mapped the link, the Dialpad pops up.
sn00x said:
I'm using VjDeviceLock wich is what you want, I think.
After you've installed it you should create a new shortcut in c:/windows/startmenu/programs/vijay555/vjdevicelock. You can copy an exiting one in this directory and edit the parameter. What you want is "-displayoff". I bound this to my Videocall-Button, cause I don't use video telephony.
Click to expand...
Click to collapse
How can you do this? Are you using a third party app? I see no way to bind anything other than 5 buttons on my device...
I bound it to "Button 5".
Hey all you guys at XDA Developers! There's an awful lot of you that have created some awsome apps! I have usued alots of them, and really enjoyed them. I was hoping that someone would want to take on this project. I'm hoping someone could create an app to have a dual purpose button to take the place of the start button icon in to top left corner. I'd like to be able to push the button once to put the device into sleep mode. The second would be to hold the button down for a second or so for soft reset. I thought on the soft reset a small screen could pop up saying "Do you want to soft reset yes or no?" Also, the button could have a couple of color choices to go with peoples themes. Like "sunny127" made the ariel battery to replace that symbol and not the complete start menu. It would also be nice if both options were on all screens. So if your listening to radio or playing music, you could turn the screen off or if the screen freezes on you, you can soft reset. This is somewhat similar to http://www.freewarepocketpc.net/ppc-download-pocket-device-power-manager-v1-0.html this app. But it does not always go with everyones themes. And really not quite in the right place. Thanks for looking. I hope some one might be up for the task. Thanks for all that you guys have done. T M Z.
No one Maybe
I will pay? Some one to make this app. for me please...
bump...bump...
Not a bad idea, personally what I'd like to see the most would be the restart functionality added to the power button.
Now if you're talking about a button on the screen which can put the system to sleep or implement a restart well, I'm not interested. I've got enough taking up my screen real estate. I do believe I've seen a small app for the sleep side of it though... might google it.
Thanks for the input.
No one at all.
I believe wisbar advance 3 by lakeridgesoftware.com does this. I have my clock mapped to soft reset, ect.
klomp10 said:
I believe wisbar advance 3 by lakeridgesoftware.com does this. I have my clock mapped to soft reset, ect.
Click to expand...
Click to collapse
Thanks so much .Ill take a look. T M Z
You can use the new FTouchFlo, it enables "corner" buttons. When tapped you can launch a program or do a system command, such as rotate screen, turn off, or whatever you want.
TheChampJT said:
You can use the new FTouchFlo, it enables "corner" buttons. When tapped you can launch a program or do a system command, such as rotate screen, turn off, or whatever you want.
Click to expand...
Click to collapse
Do you have a link?
It's now called FTouchSL, it's not free, but it's totally worth it. You can also open apps (or do a command) with a simple swipe. Not to mention you can add smooth finger scrolling to any app with the flick-and-scroll feat.
Thanks. Ill take a look.
get the softreset executable from the PHM tools package (search), place it win \windows and assign it to the PTT key as hold. I prefer to use this for a sleep function, such as when listening to mediaplayer.
tmknight said:
get the softreset executable from the PHM tools package (search), place it win \windows and assign it to the PTT key as hold. I prefer to use this for a sleep function, such as when listening to mediaplayer.
Click to expand...
Click to collapse
I what to use the touch screen.Not a hard button?
Take the place of the start button icon in to top left corner. I'd like to be able to push the button once to put the device into sleep mode. The second would be to hold the button down for a second or so for soft reset.
Hello everyone,
I have been searching for some time about a possibilitie / software that will work for my actual HTC (Diamond pro) but nothing comes to be even good. And then I remember the old times with an old HTC (sorry I do not remember the model) where a dedicate key could turn off the screen
what I am looking for, if anybody has an idea, please share it,
- hot key, shortcut that turn off the screen, and disable the touch screen
- the screen come become a-live with same key-press
that's all !!
and what I think would be the perfect solution.
- and application that as soon as it get started turn off the screen and disable the touch screen, letting still the functinality for the device to be controlled by the PC (personally I use MyMobileR )
- in that way it could be assign to a hot key, or to a short cut in the screen/menus (I will love to be possible to assign to a long touch on the central pad/button)
- it could have advance configuration options :
dim light levels instead of complete turn off
splash a logo / screen instead of black screen
- configurable key to let the app go, again lovely if a long central pad touch would make it
mainly the idea is to save battery / turn off the screen (touch also) in a easy way without lose any other functionality when the device think is not time to do it (connected to PC, GPS application, Music playing, etc...)
any idea ?
I would love to program it, but I lack the skills necessary for it. within my ignorance I presume is not a difficult app to be develop
thanks in advance
have you tried xdaShutdown?
http://forum.xda-developers.com/showthread.php?t=544016
you can make a .lnk file of "lights out" and assign it to a button.
53#"\Program Files\xdashutdown\xdashutdown.exe" /lightsout
Click to expand...
Click to collapse
Hello dude i can share what i think
Im using Turn the Screen OFF
Its very litle and simple app so after install it on the Main Memory she will apear in the start menu, you need just to go in settings, personal, buttons and there to map some of the hardware keys to use Turn of the light.
I didt it with my Answering Button and when i press and hold that Button my phone go to sleep mode fast.. when i wana wake up the phone i can do it by the Stylus.. if i pull out the stylus the phone wake up or the second variant is to press the Power button.
Im using this app because i don`t want to use my power button anymore and this program really work for me and is free
Im using Touch HD but the program will work on any WM Device