Hi,
Ive got 5 CAB files which all go together to run a little program i have written, however, when installing them on my XDA IIS every one of them displays the message 'The program you installed may not display properly because it was designed for a previous version of windows Mobile software'. I think these errors may become a problem when i place it in the Extended Rom folder.
the files are as follows
- OpenNETCF.PPC3.ARM
- MyProgram_PPC.ARM.CAB
- sql.ppc3.arm.CAB
- sqlce.dev.ppc3.arm.CAB
- sqlce.ppc3.arm.CAB
Any suggestions would be great!
Thanks,
James
Hi LinQ
The problem is that the OpenNETCF and SQL CAB files were built for WM2003 and _NOT_ WM2003SE. This means that WM2003SE cannot verify that they will work correctly with features such as the screen rotation facility.
To stop your app from coming up with the same message, you need to download the WM2003SE SDK from MS (haven't got a link sorry... but google for it and you should find it) and then target your application at the new WM2003SE device option that you get.
Hope that helps
Anyone got TomTom 5 working with Windows Mobile 5?
I received my k-Jam this morning but the setup.exe bombs out so I cannot get TT5 installed at all
any help appreciated!
thanks
Try to install the .cab file instead, it should work.
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
TomTom 5 install Problem
I had the same problem with the auto run procedure on my mini SD card.
I solved the problem by navigating to the '2577' folder and running each cab file directly on the phone (didnt use activesync). This seemed to work for me.
However, now Im having trouble with bluetooth com ports. Tomtom configuration does not show the port numbers assigned to my paired gps reciever.
Try this
http://forum.xda-developers.com/viewtopic.php?t=29282&highlight=tt5+kjam+qtek+wm5
Let me know how well tt5 runs on the k-jam ie how smooth etc as i'm awaiting my miniSD so can't try it yet!
TomTom Navigator 5.10 works with Windows Mobile 5 and Activesync 4 - but it's NOT easy. The instructions in this thread got it working for me (though I used COM4 instead of COM0):
http://forum.xda-developers.com/viewtopic.php?t=28386
Also I found that the bluetooth GPS had to be locked on to a signal for TomTom to see it at first - was fine after that.
Although my device is a HTC Universal, it has the same OS and Activesync version as your Wizard so there's no reason why it shouldn't work. Go to the above link and enjoy :lol:
Re: re: K-Jam / Windows Mobile 5 & TomTom 5
hampers said:
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
Click to expand...
Click to collapse
I had the same problem. All cabs would install except the ttn cab. Here's how I solved it.
1. uninstall everything
2. install gps.cab
3. remove sd card and soft reset (this is the important bit)
4. install ttn.cab and this time it should work
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
[/quote]
aikibrown said:
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
Click to expand...
Click to collapse
The setup.exe is meant to be run on your PC, it uses activesync. Obviously we know this doesn't work so the solution is to get the 5.10 upgrade from TomTom website as the ZIP FILE, NOT THE EXE - this is important
Anyway, extract the zip, and copy the directory with the 4 cab files in it to your SD card (where you have the map on). Then execute the cabs one by one, using the tip by jdee246 above if any of the cabs don't want to install.
After you install it, then the fun begins trying to get the damn thing to recognise your GPS device, see the link in my earlier post for a guide
Thanks guys - the soft reset seemed to do it. The manual install worked fine in the end.
I now have to wait for TomTom support to give me a code as I already had two a few months back so I can't report on how well it runs yet. Overall tho the Wizard/k-Jam is pretty slow - esp for screen refreshes.
I did try the BAKONL hack which I use to test TomTom on various devices but the ttn.cab on that patch just will not install for me under Win Mob 5.
thans
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
aikibrown said:
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
Click to expand...
Click to collapse
Hello ,
How can I install the folder "voices" because it's not a ".cab" ?
Thanks for your help.....
Who had install Tomtom 5 on the K-jam ?
Because it's too hard for me and I don't understand everything .... :?
Thanks for your help !!!!
:idea:
In total you have to copy 4 files from your wm2003 device and paste to wm2005 in these dir:
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp (voice files on cd)
\TomTom\TomTom\data05.chk (voice files on cd
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
Thanks for your help !!!!!
I try this tomorrow ....
regards.
T-Mobile MDA Compact
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
This for all of you who are still having problems...
This is what i did to get my Tomtom working on my T-mobile MDA Compact:
1. uninstall tomtom using add/remove programs.
2. using file explorer deleted the following folders:
\tomtom
\program files\navigator
\program files\contacts navigation
3. Using a registry editor - browse the software sub-folders of HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE and delete any tomtom, tomtom navigator, and/or tomtom gps/ tomtom bluetooth supprt folders.
(in order to avoid steps 1,2,3 you can also perform a hard reset after you have backed up all your data & files)
4. Navigate to HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial
5. Now change the index key from 4 to 6.
6. Exit the registry editor.
7. Soft reset your MDA.
8. Now install TTN5
9. After following the initial setup prompts of TTN5 exit it.
10. Now install tomtom nav. 5.1 (update available from the tomtom website)
11. Go back into tomtom and select "change preferences"
12. Go into GPS CONFIGURATION
13. Select Other Bluetooth
14. Select COM5
15. Click Done
16. Give tomtom about 10 seconds and your GPS navigation should now work OK!!!!
Hope this helps everyone who is trying to get this to work. I have spent a lot of time trying to find a solution that works and this i feel is it!
Needless to say use this solution at your own risk - all i can say is that its worked for me!
once installed, use this procedure.
http://forum.xda-developers.com/viewtopic.php?t=32267
It works 100%
Re: T-Mobile MDA Compact
unknown01000 said:
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
Click to expand...
Click to collapse
Can you confirm that HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial is correct - My Vairo didnt have that key...
Plus I seem to be having the same probs as you did but with the Qstarz Q880...
Terran
ttn.CAB won't install despite reset
Tried installing TT5.0 on my Vario, but no luck. Like posted before, it won't install ttn.CAB. I tried:
removing all TT files, also from registry
soft reset,
installing gps.CAB,
remove SD,
soft reset,
then install ttn.CAB
but it still says 'installation failed'. Aaarrrggghhhhh
Any ideas, anyone?
Apologies if this has been raised elsewhere but I could not find any references. I have just upgraded my Universal to the i-Mate 1.30.76 WWE ROM but a problem that I previously had still exists: I have about 14M of storage free with a relatively modest number of programs installed. Installing any new programs to the device keeps failing, even if I have just done a soft reset. This is the same whether using Activesync over USB, Bluetooth or directly installing CAB files.
For the record I already have the following installed:
Mapopolis
Mobipocket reader
CodeCity CityTime
Resco Registry Add-in
Resco Explorer 2005
Omega One Battery Pack Pro
and from ExtRom
i-mate Vodafone UK Contract
Skype
i-mate Backgammon
Does anyone have any suggestions please? I am stumped and this is really frustrating!
many thanks
I was told that arm_ce3 cab is to be installed on wizard, but there is no such cab available for 0.72RC1. I've downloaded all the files available for the same but could not find it. Please tell me which cab to use..
If you have activesync, just use the exe installer
http://corecodec.org/frs/download.php/434/tcpmp.pocketpc.0.72RC1.exe
Otherwise for wizard I suggest you try the pocketpc.RCxxx.cab first
I was looking into getting a new contact application for my Dopod 818 because the one I currently have (the default) doesn't work very efficiantly.
I have read in a few places that iContact works well with windows mobile 2003 but I haven't had any luck due to it not being a valid CE application. I was wondering, which version of icontact is required for it to install properly?
hey
I have just installed Icontact on my i-mate jam
but it doesn't work...
when I uninstalled it...
the main program of contacts was damged..................
and it show an error msg:
connot find :mscontacts(or one of it's component).........etc
plz help me
You can not use the latest version of Icontact, it will not work, and it will unninstall your mscontacts.
So do and hard reset (back up your data before ) and use the Icontact 0.64 only