Database Users

Activesync stink

Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?

Hi there,
What message do you get? Getting settings I suppose?
Disable the firewall and try again ( this helped me, while upgrading a Wizard of a friend!)
Good luck!

Activesync Problems
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.

Forgot to mention I have an o2 mini s. (Not the XDAII as indicated <--)

monkeyphonix said:
Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?
Click to expand...
Click to collapse
Did you install any firewall software? Do you have active firewall when running AS? Did you regedit your Wizard's registry in branches of AS?

Well at least you get some connection.
When I connect my KJAM I get the normal 'ding dong' and then NOTHING.
If I connect my old PDA2K to the same port it works fine!!!!!!!
Robin

Thanks for the help. I disabled my firewall (Kerio), reset the PC, did the other network hacks to try and get activesync to work. But it wouldn't.
But like I said my E200 (Voyager) sync'd no probs. Somehow as mentioned I think the registry got upset by some fiddling and a hard reset was the the cure then many hours getting it back to settings again, re-installing aps on mem card so I could see them on the phone as icons etc etc.
My device is a Vario with a Qtek Rom (tried K-Jam like the less stuff on the Qtek) with the extended Rom unlocked.

Re: Activesync Problems
stegz said:
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.
Click to expand...
Click to collapse
Didn't think to try this. I actually had this prob on my Magician (MDA compact) before I sold it. Should have remembered. Cheers.

Hello,
In fact activesync seems to be te culprit of most my 9100 problems and slowdowns.
I am currently using Activesync 4.1.4841 and when synchronizing with my Wizard everything seems to be working correctly for a first sync. Then I disconnect it from USB, wait a few seconds and try to sync again and it takes forever...slowing down the Pocket PC drastically (until soft-reset)...until returning a timeout message:
"Synchronization cannot be completed sucessfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
Any ideia how this might be solved?
Cheers,
Francisco Teixeira

Activesync 4.1 - not working

Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.

I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.

turn off your firewall
disable your onboar intell wifi card if you have one

Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?

nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...

any news??? I just met the same problem

simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1

How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter

I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.

PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices

You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.

Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125

One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?

ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter

Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!

One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!

I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............

s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......

The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.

I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.

Activesync doesnt sync via USB, works great wth Bluetooth ?

Hi,
today i found a new problem which alarmed me a bit. For all these days, I have been syncing my qtek9100 with my laptop using activesync bluetooth partnership. Everything worked great all the time - no issues.
today i just tried using the usb cable to sync. I can see that the moment I connect the cable to the phone, activesync recognises the phone and presents the authentication window and then later connects me to the phone. Great till here. But then, the pc activesync window shows "Looking for changes.." for a brief moment and then shows "Syncronizing.." and gets stuckup. On the qtek side, all I see is "Connecting" and thats it. I tried to be patient but nothing happens at all.
Interesting thing is that, with this USB cable connection the Tools->Add Remove programs and Tools->Explore Pocket PC work absolutely fine. I could install a software too, successfully.
Can someone tell me if I am missing some steps coz of which it doesnt sync when on usb connection ?
Very important concern is that, if I want to upgrade the ROM I need to establish PC<->qtek connection via usb. Since I am able to explore or install software when on usb, is it safe to go ahead with upgrading process ? (the fact that i am not able to sync using usb makes me feel my partnership is not setup properly enough for me to start the upgrade)
Can anybody guide me through this ?
Anup

I have the same problem with my brand new Qtek9100 (I received it just today). I think it's just a bug in the ROM (I am using the latest stable from the XDA FTP). I don't think there is much we can do, to be honest. My ActiveSync doesn't have such problems with any of my other 6 PDAs.

Firewalls?
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.

Re: Firewalls?
davebo said:
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.
Click to expand...
Click to collapse
Oh !!, well thats something I need to check out. When I go bck home today, let me check it. I dont have any other firewall software installed other then the one which came with windows xp sp2.
By the way, I just let the activesync run the whole night just see what happens, and in the morning, I was presented with this error.
0x80072ee2
The server could not be reached. This can be caused by temporary network conditions.This condition is generally temporary. Try to sync again later.
Click to expand...
Click to collapse
Let me see what more I can dig into. But with this situation, is it safe to upgrade the ROM ? I mean can I assume that my activesync partnership via usb is working properly and its just a sync issue ?
Anup

Active Sync problem when syncing from a different comuter

Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter

I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!

I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again

I am having the EXACT same problem... Does anyone know how to fix it???

Does anyone know how to fix it???

i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine

well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot

try file/delete mobile device in activesync and see if it still does it.

Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!

I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.

May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.

Well my device stopped recognizinig my sim car yesterday so my device is worthless.

DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!

A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.

When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102

Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.

I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.

I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...

WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.

Nothing so far... Does anyone else have any tips...

ActiveStink issues

I have a Wizard (branded XDA Mini S) and my new Hermes/TyTn (XDA Trion) which arrived about an hour ago.
I am trying to port my settings from the Wizard to the new Hermes. I have sync'd my Wizard with this Laptop and have all the programs ready to install. The only problem is that I cannot get the Hermes to sync with this laptop, it keeps identifying it as a Generic RNDIS and ActiveSync (4.1.0) ignores it completely.
Any idea where the problems could lie?

Try upgrading Activesync to 4.5.
Also, if your laptop has Vista on it there may be other problems.
Cavey.co.uk said:
I have a Wizard (branded XDA Mini S) and my new Hermes/TyTn (XDA Trion) which arrived about an hour ago.
I am trying to port my settings from the Wizard to the new Hermes. I have sync'd my Wizard with this Laptop and have all the programs ready to install. The only problem is that I cannot get the Hermes to sync with this laptop, it keeps identifying it as a Generic RNDIS and ActiveSync (4.1.0) ignores it completely.
Any idea where the problems could lie?
Click to expand...
Click to collapse

ach2 said:
Try upgrading Activesync to 4.5.
Also, if your laptop has Vista on it there may be other problems.
Click to expand...
Click to collapse
Not Vista. 4.5 solved it for once (so I have my contacts on there now), but am trying to save other files to it and it just wont work

Cavey.co.uk said:
Not Vista. 4.5 solved it for once (so I have my contacts on there now), but am trying to save other files to it and it just wont work
Click to expand...
Click to collapse
Only other thing I can think is having 'advanced features' turned on/off. You probably know this as a wizard user but try
Start\settings\connections[tab]\USB to PC
Then check\uncheck the enable advanced network functionality
If it's more of a problem than that I can't help - but hope someone else can pick up from here...

ach2 said:
Only other thing I can think is having 'advanced features' turned on/off. You probably know this as a wizard user but try
Start\settings\connections[tab]\USB to PC
Then check\uncheck the enable advanced network functionality
If it's more of a problem than that I can't help - but hope someone else can pick up from here...
Click to expand...
Click to collapse
For some reason, RAPIMGR seems to have issues and hits 100% on one of the cores on the PC. If I disconnect the phone it carries on running and doesn't pick up on reconnect. If I try to kill it with task manager it wont die (although task manager doesn't complain its protected or anything) so I killed SVCHost (the parent process) which made my computer say the computer will reboot in 1 minute.
Next time I shall try restarting the DCOM service and see if it helps.
Sigh. Thanks for your help anyway.