Database Users

Force Close

Hey everyone, i'm new here. I know that SPB Pocket Plus can do this, but I prefer the look of Resco Explorer, so I am using that, but I want the "Force Close" feature that Pocket Plus has. Is there a program that just does this feature? Thanks!

Smartskey does it, or IntelliClose.

where can I find these? or should i just google 'em?

DeniaL said:
where can I find these? or should i just google 'em?
Click to expand...
Click to collapse
Search this forum (it's the little link on top labeled "search")...

kyphur said:
DeniaL said:
where can I find these? or should i just google 'em?
Click to expand...
Click to collapse
Search this forum (it's the little link on top labeled "search")...
Click to expand...
Click to collapse
thanks for the smart ass response 8) Anyway, I found it and installed it before your post (smartkey), but I am very new to my Wizard and I don't know what my "softkey" is? Little help? Sorry I know i'm noob!

DeniaL said:
kyphur said:
DeniaL said:
where can I find these? or should i just google 'em?
Click to expand...
Click to collapse
Search this forum (it's the little link on top labeled "search")...
Click to expand...
Click to collapse
thanks for the smart ass response 8) Anyway, I found it and installed it before your post (smartkey), but I am very new to my Wizard and I don't know what my "softkey" is? Little help? Sorry I know i'm noob!
Click to expand...
Click to collapse
Hey if you want an answer to such a question ya' gotta expect a little jab (at least I'll point you in the right direction)...
Soft keys are the two buttons that activate the onscreen keys at the bottom edge of your touch screen. They are just above the red and green phone keys...

DeniaL: I'm not sure if anyone has welcomed you to the forum, but hi!
We're a nice bunch here, friendly and helpful the majority of the time
To get the most out of the board, please have a read through this post:
http://forum.xda-developers.com/viewtopic.php?t=4534
This thread may also be of assistance:
http://forum.xda-developers.com/viewtopic.php?t=54248&highlight=vjokbutt
also:
http://forum.xda-developers.com/viewtopic.php?t=44741&highlight=vjokbutt
http://forum.xda-developers.com/viewtopic.php?t=53762&highlight=vjokbutt
V

thanks, i'll take a look at those. and HI

Display broken - what kind of display i need

Hello,
my display is broken, but at this moment i can use my wizard (and i need it). I want to buy a new display, but i didn´t know what kind of display (i think there are two different display types possible[60H00032-10 or 60H00037-00]) i should buy. Anybody know how i can find the correct display type without disassamble wizard?
Thanks,
HeinB

and where do i buy it from? I tryed ebay with no sucess.

I've started a thread for hardware parts and servicing..
http://forum.xda-developers.com/showthread.php?p=1232441

What do you mean with
fencer said:
I tryed ebay with no sucess.
Click to expand...
Click to collapse
???
Do you get a incompatible display?

errr... Yesterday I dropped the wizard and the display is gone (I can see a crack from side to side) So I went on ebay to buy a new LCD but the only thing I could find was the touchpad.

Whats about this: http://cgi.ebay.de/orginal-LCD-Display-XDA-mini-S-MDA-vario-Qtek-9100_W0QQitemZ220105576249QQihZ012QQcategoryZ123195QQtcZphotoQQcmdZViewItem?

HeinB said:
Whats about this: http://cgi.ebay.de/orginal-LCD-Display-XDA-mini-S-MDA-vario-Qtek-9100_W0QQitemZ220105576249QQihZ012QQcategoryZ123195QQtcZphotoQQcmdZViewItem?
Click to expand...
Click to collapse
ow but that is Chinese to me! I don't understand German! if you can guide me out I'd appreciate it

What kind of display type do you have? At the back of your display (first disassemble) there is a number. Please check it. If it´s 60H00037-00, so you could buy this. This is the price for a display and the touchscreen.
If you need more informations, feel free to contact me or use http://babelfish.altavista.com/

It's nice to know I could replace the screen (possibly) if I had to.

fencer said:
ow but that is Chinese to me! I don't understand German! if you can guide me out I'd appreciate it
Click to expand...
Click to collapse
ok, use this one http://cgi.ebay.com/HTC-wizard-O2-mini-S-Qtek-9100-LCD-Screen-Digitizer_W0QQitemZ200099890746QQihZ010QQcategoryZ38331QQcmdZViewItem

Remote Screen Alignment

Guys need help. Anyone out there who have the calibration data file for our Htc Touch(Elfin) ? I need the calibration file so that I can use it on Remote Screen Alignment by code factory. My Touchscreen doest not work so I need the file to see if the problem is only the alignment or my digitizer. Thanks.. Just Post the download link here if you have the calibration file for Htc Touch(elfin)

......
anyone????

Never heard of this app.
Just my 2 cents.

jeremy89632 said:
Never heard of this app.
Just my 2 cents.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=355010

rainier17 said:
http://forum.xda-developers.com/showthread.php?t=355010
Click to expand...
Click to collapse
My Bad! Sorry!

disassembly htc touch2

hello, I have an emergency someone knows
tell me where I can find a guide or
a video for change the touch screen?

lucacigo said:
hello, I have an emergency someone knows
tell me where I can find a guide or
a video for change the touch screen?
Click to expand...
Click to collapse
Maybe you can find it here : http://www.mikechannon.net/
Regards
cimber

there isn't

lucacigo said:
there isn't
Click to expand...
Click to collapse
hi, the disassembly process is very similar to touch diamond2, there's one screw on the mainboard and I think two connectors (lcd + digitizer) you have to unplug, thats it (someone correct me if I'm mistaken)
edit: two screws for the keypad and the lcd is a bit tricky to take out (i used tweezersand gently levered it up on the two outer corners (careful with the foam attached to bottom)
im not responsible if u break ur device
good luck

Hi
Hi, the disassembly process...here

i have dissassembly but now i can't allign the screen same idea??
the touch work but very not allign and i can't go in the impostation.
i have make an hard reset.
sorry for my english

Thanks!
vovin07 said:
Hi, the disassembly process...here
Click to expand...
Click to collapse
It isn't in english but indeed a picture is worth a thousand words.
By the way this should be a sticky.

lucacigo said:
i have dissassembly but now i can't allign the screen same idea??
the touch work but very not allign and i can't go in the impostation.
i have make an hard reset.
sorry for my english
Click to expand...
Click to collapse
Maybe you could try to flash a custom ROM that asks for screen alignment at first start.

no thanks mate, done this to my old imate jam,
never worked after my attempt

How did the hard reset go? Anyway, a hard reset should allow you to align the screen in one of the first steps after startup. Wish you luck

A disassembling Video is on Rapid Share.
Search for "MEGA-Disassembly.wmv"
For the assembly Process its "Mega-assembly.wmv"
Links here in the Forum:
http://forum.xda-developers.com/showthread.php?t=631817

[TIPS] Improve Screen Sensitivity Of Your WinMo (.cab) UPDATE 25/4/11

Hi,
I have found tips over the forums on how to improve the screen sensitivity of your WinMo resistive touchscreen
1) When calibrating your screen, tap the cursor hairs as accurately and as lightly as possible. I use a toothpick for this, it has a fine tip. You will notice immediately how much more responsive your screen is!
2) Another method I found was:
a) Install Attached .cab / Reg Tweak
b) Soft Reset
c) Be Amazed at your Screen Sensitivity!
This is a little .cab file / reg tweak created by kevinpwhite (all credits to him)
EDIT: Many people in the thread have said that it has calibrated their screen wrong and they can't navigate it (cab/reg) This has resulted in a hard reset to get the touchscreen back(due to different touchscreen resolutions etc) I will investigate more into this and create a new version, if possible. Please use it at your own risk, and be sure to create a backup of your device.
Originally by Reix2x
Hi, dudes, my HTC WIZARD gets "untouchable" after this installation, but i found the way to solve it! =D
1- Download: CeRegEdit (u can found it on Google, with this u can explore your mobile reg trough your PC)
2- Open it (with your cell phone connected in ActiveSync)
3- Go to Tools, and select "Unlock registry" (your registry will be "Editable")
4- Navigate to:[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] and change this values to your defaults:
"CalibrationData" and "MaxCalError" (you have to found the values for your phone, here in XDA i foud the values for my phone)
5- Softreset
I hope to help someone, and i hope than no one had to make an horrible hardreset
Click to expand...
Click to collapse
Click to expand...
Click to collapse
This was created specifically for the TG01, but i think that the WinMo stored values are the same across all devices. It simply changes a reg key to increase the screen pressure to the max.
Please give me feedback if it works for you!
Please hit the THANKS BUTTON if you like this!

well, this just ****ed over my omnia, and i can't access it from my computer as i dont have a connect cable. any tips on how to bring it back to normal without hard reset?

insomnia+ said:
well, this just ****ed over my omnia, and i can't access it from my computer as i dont have a connect cable. any tips on how to bring it back to normal without hard reset?
Click to expand...
Click to collapse
please read the xda rules... no bad language.
This cannot possibly cause ANY damage. i have tested it on various winmo devices (touch hd etc) if so, explain?
Also describe your problem better. how is that gooing to help me, by just saying it ________ my Omnia!

olyloh6696 said:
please read the xda rules... no bad language.
This cannot possibly cause ANY damage. i have tested it on various winmo devices (touch hd etc) if so, explain?
Also describe your problem better. how is that gooing to help me, by just saying it ________ my Omnia!
Click to expand...
Click to collapse
any feedback from anybody? Quite a few downloads butno response to whether it actually works!

olyloh6696 said:
any feedback from anybody? Quite a few downloads butno response to whether it actually works!
Click to expand...
Click to collapse
i've tested in my O2 LIFE WM6, at the first time i got trouble, i couldnt tap my screen well. when i tapped all screen, it connected to bottom right screen.
i used my navigation button to reach the SETTING-SYSTEM-SCREEN-ALIGN SCREEN.
the align screen works. then i used a srynge to calibrate it (dont try this at home), the final result is........
WORKS GREAT LIKE A CHARM!!
my screen becomes more sensitive! I dont need my stylus anymore, with resco keybord typing is so much fun.
THANK YOU..

reykaivory said:
i've tested in my O2 LIFE WM6, at the first time i got trouble, i couldnt tap my screen well. when i tapped all screen, it connected to bottom right screen.
i used my navigation button to reach the SETTING-SYSTEM-SCREEN-ALIGN SCREEN.
the align screen works. then i used a srynge to calibrate it (dont try this at home), the final result is........
WORKS GREAT LIKE A CHARM!!
my screen becomes more sensitive! I dont need my stylus anymore, with resco keybord typing is so much fun.
THANK YOU..
Click to expand...
Click to collapse
Glad it works mate!

I cannot get what is the deal?

babak_1274 said:
I cannot get what is the deal?
Click to expand...
Click to collapse
this sets your screen sensitivity to the maximum allowed pressure point. So your resisitive touch screen will require a light touch to register changes.
This is what loads of people complain about? Poor screen sensitivity? So try this out!!

I didn't feel any difference in my Rhodium...

Daved+ said:
I didn't feel any difference in my Rhodium...
Click to expand...
Click to collapse
which method did you use?

babak_1274 said:
I cannot get what is the deal?
Click to expand...
Click to collapse
I've installed on my diamond 2 and I have been the same as the other: to do a reset, I have completely lost the calibration of the screen. Through "My mobile" I could recalibrate it, but do not notice any difference ...

diesiocho said:
I've installed on my diamond 2 and I have been the same as the other: to do a reset, I have completely lost the calibration of the screen. Through "My mobile" I could recalibrate it, but do not notice any difference ...
Click to expand...
Click to collapse
Thanks for trying amyway! It certainly works for me though. It just recalibrates the reg entries for screen sensitivity. It wont male a huge difference!
Sent from my iPod touch using Tapatalk

No one else to try?

Just used the Calibration method on my Rhodium400, seems to work, but maybe it's just my head!

coder12 said:
Just used the Calibration method on my Rhodium400, seems to work, but maybe it's just my head!
Click to expand...
Click to collapse
thabks for the feedbakc! glad it works!

I always thought that this couldn't really be done. Tried many before and didn't see a difference. Then again I can't help myself so I will try this out too.

why didn't you come up with this earlier? i wasted two years using my htc jade with this insensitivity, finally a solution
thank you so much

Okay, I will try it now, but we need to know if there are a way to uninstall it safely in case if anything wrong happen like that one who had the Omnia, also you should type if we have to recalibrate the screen points after installing the tweak on all devices or what.
Thanks in advance.

tried it on my hTC Gene (P3400) running 6.5.5 and i got the same problem mentioned in post #5...dead unresponsive screen with a few taps being wrongly located towards the bottom right of the screen...so had to go into the screen setting via my D-pad and re-align the screen to enable it again
i think problem has something to do with the screen resolution (mine is qvga)
faced similar issues when trying a screen sensitivity improvement hack meant for wvga screens i found somewhere within the forums...
anyways nice job...its great to see some people still trying to make an effort to keep WinMo going!! keep up the good work!!

she7ata said:
Okay, I will try it now, but we need to know if there are a way to uninstall it safely in case if anything wrong happen like that one who had the Omnia, also you should type if we have to recalibrate the screen points after installing the tweak on all devices or what.
Thanks in advance.
Click to expand...
Click to collapse
first try method one of calibrating your screen on your own
if you try method two of installing the cab thenall you have to do is run the cab file and soft-reset your device
if its worked, and we hope it does, then that should be it, you should have a screen which is more responsive
if you get a frozen screen just navigate to settings/system/screen and align your screen again to get it to work using the direction keys if you have them or by any other means
or hard reset to undo the settings
i'm just sharing whatever info i have...do tell me if i've left anything out