These stacks I believe are newer than the Widcomm 1.5.0 series
I think Broadcom reset the version 1.0.0
These are Broadcom 1.0.0.3000 and Broadcom 1.0.0.3500
Build 3500 is slightly unstable but newer.
These came from an i-mate patch for a PDA2K.
DO NOT USE on an i-mate PDA2K (get the orginal unhacked ones from Club i-mate).
I removed files specific to that phone and basically left just the BlueTooth stack.
Recommend a HARD RESET before installing.
I've tested theses patches on a Sprint PPC-6601 (Blue Angle CDMA phone).
Do not do a restore of a backup before or after installing this because it may restore incompatible configuration files that may crash. Build 3100 is more robust against this problem.
Hey Bro
These two are for the Qtek 9090/Xda IIs or Xda II?
I am running 2.20CHS translated with Radio 1.18 and have been unable to get this stack to work. Has anyone tried it?
The ones I posted above are hacked by me to work on the CDMA version (Namely Sprint PPC-6601).
The ones referenced in this reply below are the original patches I started with that came from i-mate club. The offical phone name that the patches are for is "i-mate™ PDA2k" (GSM Slide out keyboard). I don't know how well they would work on the Qtek 9090.
Build 3500 http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB
Build 3000 http://www.blueridge.net/dereck/bt/new/OEM_WWE_122_008.sa.CAB
Yes, good link but already bad quality with all bluetooth headset.
It's a shame.
It's a shame you don't give more details.
Which phone, which patch and what happened.
Works great on my phone.
I'm using the 3100 patch from the first post in this thread on a PPC-6601 with a HBH-300. Installed on top of a HARD RESET. That has Build 1.0.0.2200.
It's almost working perfect. Once in a great while if I go out of range for a long time I just toggle bluetooth and it reconnects immediately.
Dial Up Networking and Active Sync all work.
No static. No dropouts. Will go to sleep and wake up and still be connected.
I think that the "shame" was not for you but for imate as their patch don't solve all the issues. Maybe only a bad english ?
Tried on Himalaya_SE 2.06...
I'd merged the files from 2.02 and 2.06 and get a fairly stable handsfree, but I saw your files and got greedy... :twisted:
hmmm, it didn't work though. The installation freeze at splash screen after i cold reset the device.
I believe that there are still device specific entries in the cab files, but it's beyond me at this moment. :?
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
Note that I attached to the first post of this thread Build 3500 release 124 of the i-mate patch stripped down for use on PPC-6601 and VZ6600.
BT problems
Just installed the 3500 fix.
It improves slightly on the Jabra 250, but not enough to actually use it.
It Stabilized the connection between my Holux GR230 GPS and the Qtek 9090.
Hope there will be a better fix.
Try to look at the connection, problem with the Jabra is that it fluktuate from just right to zero every other second.
Nice to pay 800 Euro for something that do not work :shock:
I've added new patches to this the start of this thread.
They work primarily on PPC-6601. Read the attached notes.
Hi mswlogo,
Can you help me if you know which version works on a win2003se translated from chinees on himalaya?
Thanks
That phone is quite different.
I think some other folks are working trying to get this stack working on other phones like yours.
Most of the patches above have registry scripts run in them that will very likely not work on your phone.
The other patches assume you are already running late version BroadComm Stack.
I have HP hx4700 and the Widcomm version is 1.5.0 Build 2000
which one is newest?
That's a really good question.
I'm amazed to see BroadComm on 1.5 instead of WidComm.
What are the dates on the bluetooth files \windows\bt*.*
They are generally around 12/9/2004
It's hard to say what BroadComm and the venders are doing here.
Bluetooth stack on h6315
I just found a new bluetooth stack from:
http://www.ppcw.net/?itemid=2210#cmt9543
Installed on my t-mobile h6315. Device was previously inoperable with bluetooth headset. Device would go into power standby mode, and if bluetooth was running when it went to sleep, it would freeze requiring a soft reset. Now device wakes on power button, with bluetooth running, as it's supposed to. Device also wakes on incoming call, reconnects headset in less than 1 second, and allows me to answer call on the headset buttons. All other headset functions are working as designed, and sound quality seems good. My headset is plantronics 2500. Also, this stack adds a profile in the list for A2DP (??) high quality stereo headphones. Don't have any of these headphones, so don't know if this works on the h6315. Also, don't know if this is the same Broadcom/Widcomm stack you guys have been working with.
Installation is straightforward - put it on the device and tap it. Reset, delete existing device pairings, re-establish the device pairings, and you're ready to test.
All that patch is supposed to do is add two new bt profiles to the pda2k.
* High-Quality Audio support (A2DP)
* Keyboard support (HID)
I'm slightly suprised you got a performance gain out of it.
h6315
It's definately fixed the problems with my device hanging when it goes into standby with bluetooth running and the headset connected.
Now my question is should I install the build 3500 for the 6315 listed above? It appears to be a newer release than this. Any thoughts as to the differences? I'm having a hard time following from the thread as to all the other changes that are in this .cab, and why they are there? Can any one help summarize that?
Hi I've been looking through the forum for the last couple of days and I'm really impressed by the great tips and downloads etc.
Anyway I have a question regarding the Bluetooth configuration /connectivity options available on the S110. In comparison to my other devices the Bluetooth on the S110 sucks.
So I'd like to install the Widcomm version, I've tried the bluetooth_GPS.cab but it fails to initialise the bluetooth stack, so the question is has anyone been able to install and overwrite the current Bluetooth on the Magician?
Any help will be greatly appreciated!
sorry to inform u that the Widcomm Bt stack does not work on the Magician
there is another Bt stack made By toshiba ( for it's own PPC ) and it works on the Magician and adds alot of new profiles missing from the M$ stack , but it's not stable.
I guess I M$ Stack sucks, but you'll get used to it...
cheers
Hi All. i've got a qtek 9000 and i can't use my bt headphones.
I bought this one with the ipaq and than i succed using it also with my qtek 9090
right now i can't with the new 9000 and i have no idea how to do it
please can someone help me?
Please be more specific as to where the problem is. You say you got it working on the 9090 but not on the 9000. Exactly what part of the pairing process does the difference come out?
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Barinight.com said:
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Click to expand...
Click to collapse
You mean it cannot be paired without running a particular software? Yikes... So when you put the Bluetooth headset to discoverable mode, then try detecting it from the Universal, it sees it but there are just no services available, am I right?
So it seems that the one at fault is the Bluetooth stack installed in the Universal... In that case, I cannot help you... SOrry
The Universal does not support A2DP or what HP calls High Quality Stereo, as such it does not support your headphones. A2DP is suppose to be part of what is included in the MSFP update but i-mate has chosen not to include it. Until someone releases A2DP support your headphones will not work. Now if you happen to read German I understand their is a German ROM that supports this feature.
Otherwise it just a question of waiting till someone releases this update, if they do.
i think that is the stack but the question is:
the 9090 doesn't support the high quality too but installing the driver things changes so i won't belive that thare isn't a driver for the 9000
i tried to find something from Widcom (i hope is the right way to write!) nut i dind't find anythink
so i hope that someone can help me because i've payed 120€ the headset and i will love to continue using it!
Hi guys,
Really hoping someone can help me here as getting very frustrated.
First off, I just need to confirm what model of phone I have! It's the MDA Compact II, so I assumed the Charmer, yet does not have WM5 on it, it's WM 2003 SE. Is this still a Charmer...or a Magician?
Originally I had another unit which came direct from TMobile, which had WM5 on it. I lost it. I bought another one off Ebay but it appears to be an older model phone, with WM 2003 SE on it. (Didn't realise this at the time grrrr).
Anyway I bought a Bluetooth dongle the other day to use with my laptop. My only need for it really is to simply transfer files between the laptop and the MDA.
I've installed the software that came with the dongle (Bluesoleil) but I can't see obviously how I am to transfer files. I can pair the devices but they will not connect with each other. Do I need to use FTP? If so, I can see no provision for this on the MDA.
Hayy-elllllp!
Many thanks in advance,
RHF
Hi, the easiest way how to recognize these units is to look at the information about the device (settings - system). The older version (magician) has 416MHz clock of the cpu, newer version (charmer) has only 195MHz clock of the CPU.
It can only be the Magician. There is no Charmer with WM 2003SE and no Magician with WM5.
Someone has to know how to use the Bluetooth hack on QTEK 9090? Or if you have any other program similar to it, because I tried in every way and will not x_x.
QTek 9090 Windows Mobile 6.5
Thank you!
I thought all available bluetooth hacking tools are obsolete for couple years now? They only worked in early versions of WM 5 as far as I know. Then they had fixed the security issues.
Well I do not know this, because even with the WM3 old I could not use, using Bluetooth hack any phone that supports Java standard, it works at least QTEK: S, hence I was curious if this is or know how to fix it.