Hi,
I was wondering if any one has tried using a palm emulator on their Shift and if so which program. I tried running a program called styleTap on the Win Mobile side but o luck and the program just freezes up when opened. I am looking to run programs from a treo 680 which is one of the latest Palm software if I am not mistaken. Any help would be greatly appreciated.
Thanks
It's possible
StyleTab (shareware) works on the Shift!
To get it working you need QuickMenu (free) once.
Install QuickMenu
Install StyleTab and YOU CAN'T REACH OK on the nag screen!
Open QuickMenu and turn screen right.
The StyleTab screen is completely displayed.
Goto Optons-display size and choose original.
Restart StyleMenu
Turn screen back to narmal orientation
(Delete QuickMenu)
Install all your palm apps but hacks.
Enjoy your original size IIIc on this big screen.
Start paying after 14 days...
re
Thanks man I am going to try this and post comments.
Turn screen BEFORE installing StyleTab or the WM side freezes...
But after a restart from Vista side you can still turn the page and start StyleTab again.
I like it as most programs work (NO hacks, NO DA files)
re
I tried this and now I can see the OK button but for some reason I cannot click on it?? any thoughts? Also which version are you using?
I use the pocket pc version from http://www.styletap.com/downloads.php
The smartphone version uses keys only!
At the moment I'm reinventing my IIIc on the Shift...
re
Hi,
That is the one I am using, but not able to do anything, for some reason the alignment is off too. If i want to click register I need to click way higher than where the actual button is. What other software do you have installed? any help is appreciated.
Thanks
Since yesterday I have registered my copy of Navigon MN7 from my G900 (WVGA too) to the X1 (no problems, thanks to the service of Navigon).
I changed the files as attached. If you use them, place them in main folder of Navigon on the storage card and the ApplicationSettings to the settings directory.
BUT ATTENTION: This is of a german G900. Therefore it may be possible that you have to change some lines in the files form "Speicherkarte" to "Starge Card". I didn't look at this! After zipping them on the PC just open them first with text editing program and look if there ist "Speicherkarte" written somewhere in the file. Change this to the language of your X1.
My experiance of the X1 with the MN7 ist great, if you accept two bugs, it has now, even an update is announced for the next days...
1. You only can use WVGA in the Portrait Mode. In Landscape Mode it is only VGA. It works, but with a black stripe on the right site. I don't mind because I am using only Portrait Mode.
2. MN7 finds the gps of X1 at once with the automatic search. But as it is with other internal GPS too, it can not hold the connection more than 1-2 minutes. You have first to start a program, that holds the connection (I use GPS-Skinner) and then start MN7 and everything works fine. This is a known Bug Navigon is working at and an update is announced for the beginning of November.
If you accept this, you get a great navigation experiance. The internal gps is faster than every gps I ever had. Even my GNS 5843, which is a great quality product. X1 fixes faster and finds and holds more satelittes!
The speed ist great. My G900 (WVGA too) needed 40+x seconds to start MN7, the X1 about 15 seconds. Everything responses very fast. Calculating a route needs 3-5 seconds. Typing the adress about 1-3 seconds for response. Worlds between earlier versions of MN.
With this great internal GPS it gives a complete new feeling of navigation to me, and I use Navigon since a lot of years
first thx for the files, but this two bugs are crazy, specialy the GPS Bug, I tried IGO and Garmin XT, they both work perfect, without any GPS loss, or Problems with WVGA, so if you drive many in EU also East EU then i would take IGO 2008, they havr the best Maps there, it is very fast, and runs smooth.
Regards cHarOn
cHarOn99 said:
first thx for the files, but this two bugs are crazy, specialy the GPS Bug, I tried IGO and Garmin XT, they both work perfect, without any GPS loss, or Problems with WVGA, so if you drive many in EU also East EU then i would take IGO 2008, they havr the best Maps there, it is very fast, and runs smooth.
Regards cHarOn
Click to expand...
Click to collapse
i agree that Igo works fine, but if we compare maps like Italy, navigon has more streets in navigon in europe.( Latvia is very bad.) I faced this because one truck driver asked to fix for him latest maps for navigon and I was thinking that igo would be better and got for him igo, but then he started complaining that there are missing blocks of sreets.
In Latvia tomtom works the best. Igo cant find adresses.and has problems with routs
but still my favorit is igo
Your file BinaryConfig.xml seems to be corrupted ??? It cannot be opened.
Hi,
I have installed Navigon 7 to my X1 and I have used the files posted here to see if it works, however when I launch the app I get the splash screen with the spinning logo and then after about 15-20 seconds that diapears and the phone drops back in the last panel I was using i.e Today panel.. but the start bar at the top of the screen has disapeared..?
Any ideas..
I have uninstalled and reinstalled many times but that doesnt help.. and the only way to get the start bar back is to reboot the phone.
Any help would be greatly appreciated.
Hi,
once you rebooted the X1, it should start without any problems every time you start MN7.
Had the same problem. Since reboot it works flawlessly.
Chris
Hi Chris,
Thanks for the reply.. Unfortunatly I get the same problem everytime I reboot the phone.. Launch the app get the splash screen and then it drops back to Panel but without the start bar.. Reboot.. start again.. and again.. etc..
Shame really as it looks like a good sat nav and would like to play with a specially extended trial version before I purchase the app
I've just signed up for the beta of telmap which works fine on the x1 (although they don't give you an option for it,so the stellar or diamond versions work).
You say you have replaced the three files with the WVGA ones? hmmm...
Maybe it is because of the trail version? well, doesn't really make sense...
One more option to get it running is, maybe, to do the thing in landscape mode?
First turn your screen and then start MN app. Well, you never know...
Chris
After completely removing the app and the navigon directory from the phone and then doing a registry clean and a general tidy up of the storage on the phone I re-copied the Navigon directory with its contents to the phone and then copied the files from the first post in this thread and I can now launch the app without it dropping back to the panel, however now it asks for a serial key.. anyone have a keygen for this app.. as its currenlty asking me to go to the navigon site with the device id and register for a serial..
hello,
i have the following problem.
i coppied all file on the card, then installed the prog.
i can start it from the file manager, but if i want to try it from start... and press the icon, nothing happens...
does anyone have an idea, what this could be?
(if my english is not that perfekt, i am from germany and i am trying,hehe)
gruss,
maik
Nothing. I can't cancel my previous message.
Navigon MobileNavigator 7.3.1 Xperia Fix
Hello Guys,
i had just installed the Navigon 7.3.1 with the patch in the attachment that the only one which works
copy the "ApplicationSettings.XML" in the folder: "settings" and the two files : "BinaryConfig a. CacheConfig" in the Folder "Navigon"
And if you want to start the program in the landscape mod you have to install the "MN7LS.ARM.CAB"
View attachment 7.3.1.zip
View attachment MN7LS.ARM.CAB
MN7 working now
Many thanks to rookie333 I was finally able to get the test version of MN7 running
Its such a simple solution. Shame on Navigon Support for not being able to help at all and for their product being so poor designed to not include 800x480 resultions.
Normally I use it in the portrait mode. But one of the many flaws in Navigon software is that reality view only works in landscape mode.
But when I switch to landscape mode the screen gets broken. Any idea why?
In comparison to Tomtom the MN7 is not ready for 800x480 devices.
The whole display is stretched in length and squashed in width.
Everything on the map is so tiny you cannot read it, so symbols and text are unusable. The great lane-assistant from version 6 is now a tiny icon on the side.
All together MN7 on X1 is a big disappointment. Hopefully Navigon comes up with some patches soon.
But as I know Navigon development and support for years now, that will not happen soon.
So I will stick with my MN6 on PDA or change to Tomtom.
Tomtom on the other hand looks like it was build for the X1. It completely fits the screen, without stretching or squashing. Icons and text are great.
Regards
pt
You have to start Navigon in landscape mode, but you cannot switch while the program is running. I don't think it's squashed or stretched. The interface is VGA, but with X1's high dpi, it looks good. The map is just perfect with the attached XML files. The xml files are from the Touch HD forum, but with modified BinaryConfig.xml.
Landscape Mode
My Xperia will not start Navigon in Landscape mode. It sort of freezes up the Xperia which then needs restarting. Is the CAB language specific?
In Portrait mode it is useless (see edit below) as the useful part of the view (betweern the Arrow and the horizon) is just a tiny slit shown in my attached photo. Compare that of the official picture where the position arrow is much lower down and the horizon is near the top of the screen as it should be.
On the Xperia, one third of the screen is taken up by sky!
Also the Position Arrow with its circle cover up important parts of road junctions making it hard to see where to drive.
Edit: OK Now I've installed it all again, and copied the XML files again and now it is much better. The sky only take up a small amount of the screen and the arrow is lower down. What is going on? Is it dependent on the XML files?
Does anybody know how to turn on TMC on Mobile Navigator 7. I didn't setup it during first install but i discovered i can do it ....
I don't know how to setup again
Finaly i have something else than wayfinder. Thanks Rookie333 for excellent instruction.
I successfully used your configuration on my Xperia R1A. Navigon now launches in WVGA portrait (but I am unable to run it in landscape mode, even with the cab given in this thread, it fails with a message "unable to find mobilenavigator7.exe", quite strange).
But my real problem is : each time I start navigon, there is no GPS defined. So I have to configure it, using assistant. It finds the internal GPS, and it works for a short time.
Then during navigation it stops working. If I check the GPS status, there is no GPS device detected again. I have to detect the GPS again, etc ... and it works for several minutes, then fail again ...
Any idea why Navigon is loosing connection to the GPS so often ?
HI
Can i know where is the installation file
I have tried several ways to make this software work. The original post didn't state clearly the procedure and I saw many having some pointer problems. Here is the working procedure:
Installation:
Unzip the WVGA2 into your phone's SD card
Install WVGAFIX2_sdkCerts
Install WVGAFIX2
This will general a program named VModeSwitch in your program list
How to run the program:
1. Put your WVGA2 fix program "VModeSwitch" in the menu list (settings --> menus)
2. Slide open your X1 and make the phone in landscape mode
3. Click start and click VModeSwitch
4. Click 480x640 then click "set"
5. The screen will shrink to 480x640 landscape mode but in opposite direct
6. Now, close your X1, then the VGA will switch to Portrait mode.
Now you can use the phone and everything works with no pointer problem.
Have Fun! Below is the game list that works in my phone
Work in WVGA mode:
1. Arvale II: Ocean
2. Astraware Sudoku
3. Bejeweled 2
4. Bubble Breaker
5. Final Battle
6. Maumau
7. Solitaire
8. Spore
9. Tower Mogul
10. Tradewinds 2
11. Warring Nations
Only Works in WVGA2 Fix mode:
1. Aces Texas Hold'em No Limit
2. Stolen In 60 Seconds
3. Westward
wvga2 fix
I have also installed the wvga2 fix (from 'cuttila' or some name like that), first the certfile. Tomtom6 is now in portraitmode working, but.... any other application (phone, agenda, etc.) is sticking on the screen, I cannot close it, it wont get 'away' until I open another application, which will stick again, I have as well done callibration again but solves nothing. Alltogether I càn use all the apllications bùt on a anoying way. Finally to get rid of it I have to switch off the whole phone. Xperia X1.
Why does Sony Ericsson not come with a nice solution, that would solve a lot of problems, if they make a product with higher resolution they should know a lot of applications just won't work on it. So whats easilier than deliver as well the solution for it.
Waiting for better times.....
Did you try WVGAFix3?
Try it several times and works great for me on my X1
wvgafix wvga2 wvga3
Okay, I downloaded WVGA3.fix to my Xperia X1 into My documents and it looks to work better. But it looks like I should not open my keybord, in other words once you activate the application you should not change from portret to landscape / vertical to horizontal, is asking for problems, menu's stay sticking. Anyway my Tomtom Navigator 6 works OK on it. But if Tomtom is on, it looks like I cannot just have a look in my contacts or other applications, but that might as well be the case if the resolution would not be a problem I think. If TomTom is on the Windows icoon for the different menu's is not available. Telephone anyway works OK. It might be that the sound on bluetooth carkit is a bit worse because of using much memory? I have to try it further out. But having my Tomtom always with me and working is very fine! I am happy with it. Thanks.
The one thing that irks me the most about my Imagio is that the screen will only go to landscape for the camera, the VCAST TV, and the Internet Browsers. With anything else only portrait is available. I would really love to be able to make it go landscape for other programs. I have found a couple of free routines that will set the phone to do this but they won't work because the Net Framework on the phone is the wrong version (go figure an older version of Framework would be placed in the most up to date version of windows). Can anyone tell me what is the best routine that will allow me to toggle landscape mode at will on the Imagio?
http://forum.ppcgeeks.com/showthread.php?t=92385
or just download the new .net framework
Thank you so much. I'll try what was listed. Does anyone know why the latest .NET CF isn't installed in Win Mo 6.5? Why would Microsoft not have the latest in the latest OS?
I have 3.5 installed on mine and I'm using Gyrator 2 to rotate my screens around
Great plugin
CodysGrammy said:
Thank you so much. I'll try what was listed. Does anyone know why the latest .NET CF isn't installed in Win Mo 6.5? Why would Microsoft not have the latest in the latest OS?
Click to expand...
Click to collapse
Well I followed the instructions for editing the registry and changing the orientation for the TF3D screens works great. Now what about the other programs such as Word and Excel? Do I have to do all the same registry edits for those or only part of the edits? Thanks for all the help guys. I'm about to get the phone the way I like it.
Americanmetal said:
I have 3.5 installed on mine and I'm using Gyrator 2 to rotate my screens around
Great plugin
Click to expand...
Click to collapse
Was 3.5 already installed on your device when you bought it or did you have to install it? How do I find out what version of .Net CF is install on the phone?
I don't know what version I had
I found by using gyrator and changescreen for screen rotation is buggy, slow, and sometimes pages seem to get scrambled. I don't need rotation in all apps that's why I installed g trigger, available here. I have it set up to jerk the phone from side to side and this toggles screen orientation. I also set it up to have the dialer come up when you flick the phone forward and to close programs when you flick it away. It really works great, no crashing. And there are no accidental orientation change. Not to mention it saves you the "phone" softkey and you don't have to try to hit the "X" in the corner anymore. Try it, it is a cab install, and removes completely if you don't like it.
Since the device does not come with the utility, I've looking for a program who could switch the screen from landscape to the right 90º, but every programs I find work bad.
The firs attempt was with rotate 1.1. But it doesn't work. I tried every ppc programs, and the only who worked was Nyditot. But the problem with this is that is neccesary to reset to aply the configuration and to apply to the hole system, and I only want it to play my old games and some other stuff, to rotate just the aplication.
Do you know any other program working on an ipaq 914?
You can use xTask - LINK - it's task manager, but it also does have rotate function.
Spiaatie said:
You can use xTask - LINK - it's task manager, but it also does have rotate function.
Click to expand...
Click to collapse
I know, but it does not work on the Ipaq 914. In fact I don't know any program which works without reboot.
Does anyone know any kind of editing tool to set the startup of a program changing the orientation, or something like that?
Anything to make my old programs work should be welcome
Any news about this?